summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-09rtlwifi: Unify variable naming for all driversLarry Finger5-44/+42
Some drivers refer to a particular quantity in the driver's private are by one name, while others use a different name. These differences are removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09brcmfmac: get rid of duplicate SDIO device identifiersArend van Spriel3-25/+12
Instead of defining SDIO device identifier in brcm80211 code use the defintions in linux/mmc/sdio_ids.h directly. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wl18xx: declare radar_detect_widths support for ap interfacesEliad Peller1-0/+4
After having all the dfs infrastructure in place, declare radar_detect_widths support for the ap interfaces combination. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: add dfs region to reg domain update cmdGuy Mishol4-0/+10
Add dfs region to the reg domain channel update command. Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: allow using dfs channelsEliad Peller2-21/+9
Since we are going to support dfs channels, there is no reason to mark them as NO_IR (having the DFS flag is enough anyway). Additionally, when setting the regdomain configuration, enable usable dfs channels. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: add dfs master restart callsEliad Peller8-1/+55
call wlcore_cmd_dfs_master_restart when starting the ap on a new channel (after csa is done). Add a new WLVIF_FLAG_BEACON_DISABLED flag to indicate that dfs_master_restart command is required. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: add support for ap csaEliad Peller3-7/+95
Support ap csa support by implementing the channel_switch_beacon() mac80211 op. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wl18xx: add debugfs file to emulate radar eventEliad Peller4-0/+79
Add debugfs file to emulate radar detection through a special fw cmd (which in turn will generate radar event) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wl18xx: add radar detection implementationEliad Peller12-9/+257
Add support for CAC start/stop commands, and pass radar detection events from the fw to mac80211. Bump fw name (to wl18xx-fw-4.bin) and min fw version (to 8.9.*.*.11), and align event mailbox accordingly. Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: enable sleep during AP mode operationKobi L9-11/+101
Enable ELP authorization in AP mode and enable the use of the wakeup bit in the ELP register. Introduce AP role sleep configuration which is disabled by default. When configured, it allows the AP to sleep when ELP is authorized for it. Signed-off-by: Kobi Leibovitch <kobi.lev100@gmail.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: enable AP wowlanEliad Peller1-5/+13
configure wowlan when host is suspended in AP mode, since the FW can now wake the host up on Rx. Signed-off-by: Kobi Leibovitch <kobi.lev100@gmail.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: add ability to reduce FW interrupts during suspendRam Amrani8-25/+155
Add the ability to mask FW interrupts on RX BA activity, PSM entry/exit and fast-link notifications. This is used when the host is suspended in order to decrease redundant wake ups. Signed-off-by: Ram Amrani <ramrani@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore/wl18xx: handle rc updates in a separate workEliad Peller5-21/+44
sta_rc_update runs in atomic context. thus, a new work should be scheduled in order to configure the fw with the required configuration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: fix sparse warningEliad Peller1-8/+1
Use kstrtoul_from_user() for reading the user value, and fix the following sparse warning: drivers/net/wireless/ti/wlcore/debugfs.c:937:15: error: incompatible types in comparison expression (different type sizes) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-09wlcore: fix WLCORE_VENDOR_ATTR_GROUP_KEY policyEliad Peller1-1/+1
The attribute type is binary data (with max length). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07mwifiex: tdls: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07mwifiex: 11n_rxreorder: Use setup_timerJulia Lawall1-4/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07mwifiex: main: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07orinoco_usb: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.function = f; -t.data = d; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07iwl3945: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07iwl4965: Use setup_timerJulia Lawall1-6/+3
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07cw1200: queue: Use setup_timerJulia Lawall1-3/+1
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07cw1200: main: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07wireless: cw1200: Use setup_timerJulia Lawall1-3/+2
Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07rt2x00: use helper to check capability/requirementFred Chou6-26/+26
Use rt2x00_has_cap_flag macro to check rt2x00dev->cap_flags. Signed-off-by: Fred Chou <fred.chou.nd@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-07wil6210: use 'uint64_t' instead of 'cycles_t' to avoid warningsChen Gang1-2/+2
do_div() checks the type strictly. 'cycles_t' may be 32-bit under quite a few architectures (parisc, arm, avr32 ...). So use 'uint64_t' instead of, the related warning (with allmodconfig under parisc): CC [M] drivers/net/wireless/ath/wil6210/debugfs.o In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: drivers/net/wireless/ath/wil6210/debugfs.c: In function ‘wil_vring_debugfs_show’: include/asm-generic/div64.h:43:28: warning: comparison of distinct pointer types lacks a cast (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from ./include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/linux/list.h:4, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:44:18: warning: right shift count >= width of type [-Wshift-count-overflow] if (likely(((n) >> 32) == 0)) { \ ^ include/linux/compiler.h:159:40: note: in definition of macro ‘likely’ # define likely(x) __builtin_expect(!!(x), 1) ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ In file included from arch/parisc/include/generated/asm/div64.h:1:0, from include/linux/kernel.h:124, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/net/wireless/ath/wil6210/debugfs.c:17: include/asm-generic/div64.h:48:22: warning: passing argument 1 of ‘__div64_32’ from incompatible pointer type [-Wincompatible-pointer-types] __rem = __div64_32(&(n), __base); \ ^ drivers/net/wireless/ath/wil6210/debugfs.c:107:4: note: in expansion of macro ‘do_div’ do_div(idle, total); ^ include/asm-generic/div64.h:35:17: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘cycles_t * {aka long unsigned int *}’ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Add support for wowlan disconnectMaithili Hinge1-1/+16
This patch adds support for wowlan disconnect. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Move code for wowlan magic-packet and patterns to a functionMaithili Hinge1-31/+47
This patch moves code for wowlan magic-packet and patterns to a function mwifiex_set_mef_filter. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Increase priority of firmware download messageAmitkumar Karwar3-5/+6
When driver is loaded, it is important to know if FW was already active or it is freshly downloaded. This patch increases the priority of these messages. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not release lock during list_for_each_entry_safe()Amitkumar Karwar1-6/+0
As we are releasing the lock, during next iteration we may end up getting page fault if other thread has already deleted that node. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: wakeup pending wait queuesAmitkumar Karwar1-0/+2
Wakeup pending wait queues in unload path. This will help to avoid soft lockup issues in corner cases. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add wakeup timer based recovery mechanismAmitkumar Karwar6-0/+24
If host fails to wakeup the firmware, we will trigger card reset after 3 second timeout. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: increase delay during card resetMarc Yang1-2/+2
200ms is the requirement to allow VDD1.1 and VDD1.8 to drop to have proper reset. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: Adjust calling place of mwifiex_terminate_workqueueMarc Yang1-2/+2
Workqueue needs to be flushed early when removing card, otherwise soft lockup issue may happen because main_process is triggered by interrupt while card is being removed. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: remove redundant flag MWIFIEX_HW_STATUS_FW_READYAmitkumar Karwar2-5/+2
This flag is never set but checked at two places. We will get rid of this code. Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: get supported BA stream info from FWAvinash Patil2-3/+12
This patch adds support to get number of BA streams supported information from FW. Some newer chips(e.g. 8897 series) support 4 BA streams for TX; so driver should not disallow BA stream setup just after 2 streams have been established. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: make tx packet 64 byte DMA alignedXinming Hu4-28/+43
This patch adds support for DMA alignment of 64 bytes for TX packets. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: do not send key material cmd when delete wep keyXinming Hu1-1/+5
This patch fixes memory corruption reported by community developer. "Memory corruption occurs in mwifiex_ret_802_11_key_material_v1() when a short command response is received without a key length causing non initialised memory to be interpreted as the key length resulting in a memcpy() overwriting the part of the driver's private data structure beyond the key area." For v1 key material API firmwares, there is no need to send command to delete WEP key. WEP encryption/decryption is controlled by mac_control command. This patch avoids sending key material command in del_key case. Reported-by: Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: enable -D__CHECK_ENDIAN__ for sparse by defaultAvinash Patil1-0/+2
Enable the endian checks by default. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Add support for bcm43340/1 wireless chipsetsArend van Spriel5-2/+15
This patch adds support for the bcm43340 and bcm43341 wireless chipsets. These two chipsets are identical from wireless parts perspective. As such they use the same firmware image. Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rob Herring <rob.herring@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> [arend@broadcom.com: squash to single commit, remove 43341 chipid] Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: module parameter for deep sleep configurationAvinash Patil1-1/+6
This patch adds module parameter for auto deepsleep configuration. By default, module_param is 0 and auto deep sleep is enabled. If mwifiex driver is loaded with disable_auto_ds=1, deep sleep configuration would not be downloaded to FW and FW would not enter deepsleep upon initializing. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save sdio register values before firmware dumpXinming Hu4-0/+127
This patch saves sdio registers value before firmware dump, this can be used to find out reason for FW dump. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: save driver information to file when firmware dumpXinming Hu5-1/+133
This patch adds support to dump driver information to a file when firmware dump happens. This information can be used to root casue FW crash. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move debug_data dump function to common utililty fileXinming Hu3-180/+198
mwifiex_debug_info also need be save to file when firmware dump happens. Move its dump implementation function to commmon utilility file, thus it can be reused in firmware dump function. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move pm_wakeup_card_complete definition to usb.cXinming Hu2-7/+7
Move mwifiex_pm_wakeup_card_complete handler to source file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add rx histogram statistics supportXinming Hu10-0/+219
This patch add a new debugfs item histogram used for reporting rx data packet statitics(rx rate, snr, noise floor, signal strenth) to userspace. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add bcn_rcv_cnt and bcn_miss_cnt in getlog debugfsXinming Hu4-2/+14
This patch add receive beacon count and miss beacon count statistics in debugfs getlog item. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: report tdls peers in debugfsXinming Hu6-1/+52
This patch add provision to show TDLS peer table in debugfs file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06ath5k: drop owner assignment from platform_driversWolfram Sang1-1/+0
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: enable 802.11d support in firmwareArend van Spriel3-0/+29
When the driver gets beacon info containing a country IE from user-space upon .start_ap() callback, it will enable regulatory 802.11d support. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 16:37:32 +0300