summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-29drm/qxl: return IRQ_NONE if it was not our irqJason Wang1-0/+3
commit fbb60fe35ad579b511de8604b06a30b43846473b upstream. Return IRQ_NONE if it was not our irq. This is necessary for the case when qxl is sharing irq line with a device A in a crash kernel. If qxl is initialized before A and A's irq was raised during this gap, returning IRQ_HANDLED in this case will cause this irq to be raised again after EOI since kernel think it was handled but in fact it was not. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29drm/radeon: set default bl level to something reasonableAlex Deucher1-3/+7
commit 201bb62402e0227375c655446ea04fcd0acf7287 upstream. If the value in the scratch register is 0, set it to the max level. This fixes an issue where the console fb blanking code calls back into the backlight driver on unblank and then sets the backlight level to 0 after the driver has already set the mode and enabled the backlight. bugs: https://bugs.freedesktop.org/show_bug.cgi?id=81382 https://bugs.freedesktop.org/show_bug.cgi?id=70207 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: David Heidelberger <david.heidelberger@ixit.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29irqchip: gic: Fix core ID calculation when topology is read from DTTomasz Figa1-1/+4
commit 29e697b11853d3f83b1864ae385abdad4aa2c361 upstream. Certain GIC implementation, namely those found on earlier, single cluster, Exynos SoCs, have registers mapped without per-CPU banking, which means that the driver needs to use different offset for each CPU. Currently the driver calculates the offset by multiplying value returned by cpu_logical_map() by CPU offset parsed from DT. This is correct when CPU topology is not specified in DT and aforementioned function returns core ID alone. However when DT contains CPU topology, the function changes to return cluster ID as well, which is non-zero on mentioned SoCs and so breaks the calculation in GIC driver. This patch fixes this by masking out cluster ID in CPU offset calculation so that only core ID is considered. Multi-cluster Exynos SoCs already have banked GIC implementations, so this simple fix should be enough. Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Fixes: db0d4db22a78d ("ARM: gic: allow GIC to support non-banked setups") Link: https://lkml.kernel.org/r/1405610624-18722-1-git-send-email-t.figa@samsung.com Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29irqchip: gic: Add support for cortex a7 compatible stringMatthias Brugger1-0/+1
commit a97e8027b1d28eafe6bafe062556c1ec926a49c6 upstream. Patch 0a68214b "ARM: DT: Add binding for GIC virtualization extentions (VGIC)" added the "arm,cortex-a7-gic" compatible string, but the corresponding IRQCHIP_DECLARE was never added to the gic driver. To let real Cortex-A7 SoCs use it, add the necessary declaration to the device driver. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lkml.kernel.org/r/1404388732-28890-1-git-send-email-matthias.bgg@gmail.com Fixes: 0a68214b76ca ("ARM: DT: Add binding for GIC virtualization extentions (VGIC)") Signed-off-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ring-buffer: Fix polling on trace_pipeMartin Lau1-4/+0
commit 97b8ee845393701edc06e27ccec2876ff9596019 upstream. ring_buffer_poll_wait() should always put the poll_table to its wait_queue even there is immediate data available. Otherwise, the following epoll and read sequence will eventually hang forever: 1. Put some data to make the trace_pipe ring_buffer read ready first 2. epoll_ctl(efd, EPOLL_CTL_ADD, trace_pipe_fd, ee) 3. epoll_wait() 4. read(trace_pipe_fd) till EAGAIN 5. Add some more data to the trace_pipe ring_buffer 6. epoll_wait() -> this epoll_wait() will block forever ~ During the epoll_ctl(efd, EPOLL_CTL_ADD,...) call in step 2, ring_buffer_poll_wait() returns immediately without adding poll_table, which has poll_table->_qproc pointing to ep_poll_callback(), to its wait_queue. ~ During the epoll_wait() call in step 3 and step 6, ring_buffer_poll_wait() cannot add ep_poll_callback() to its wait_queue because the poll_table->_qproc is NULL and it is how epoll works. ~ When there is new data available in step 6, ring_buffer does not know it has to call ep_poll_callback() because it is not in its wait queue. Hence, block forever. Other poll implementation seems to call poll_wait() unconditionally as the very first thing to do. For example, tcp_poll() in tcp.c. Link: http://lkml.kernel.org/p/20140610060637.GA14045@devbig242.prn2.facebook.com Fixes: 2a2cc8f7c4d0 "ftrace: allow the event pipe to be polled" Reviewed-by: Chris Mason <clm@fb.com> Signed-off-by: Martin Lau <kafai@fb.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29mwifiex: fix Tx timeout issueAmitkumar Karwar1-0/+1
commit d76744a93246eccdca1106037e8ee29debf48277 upstream. https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Reported-by: Andrew Wiley <wiley.andrew.j@gmail.com> Reported-by: Linus Gasser <list@markas-al-nour.org> Reported-by: Michael Hirsch <hirsch@teufel.de> Tested-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29perf/x86/intel: ignore CondChgd bit to avoid false NMI handlingHATAYAMA Daisuke1-0/+9
commit b292d7a10487aee6e74b1c18b8d95b92f40d4a4f upstream. Currently, any NMI is falsely handled by a NMI handler of NMI watchdog if CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR is set. For example, we use external NMI to make system panic to get crash dump, but in this case, the external NMI is falsely handled do to the issue. This commit deals with the issue simply by ignoring CondChgd bit. Here is explanation in detail. On x86 NMI watchdog uses performance monitoring feature to periodically signal NMI each time performance counter gets overflowed. intel_pmu_handle_irq() is called as a NMI_LOCAL handler from a NMI handler of NMI watchdog, perf_event_nmi_handler(). It identifies an owner of a given NMI by looking at overflow status bits in MSR_CORE_PERF_GLOBAL_STATUS MSR. If some of the bits are set, then it handles the given NMI as its own NMI. The problem is that the intel_pmu_handle_irq() doesn't distinguish CondChgd bit from other bits. Unlike the other status bits, CondChgd bit doesn't represent overflow status for performance counters. Thus, CondChgd bit cannot be thought of as a mark indicating a given NMI is NMI watchdog's. As a result, if CondChgd bit is set, any NMI is falsely handled by the NMI handler of NMI watchdog. Also, if type of the falsely handled NMI is either NMI_UNKNOWN, NMI_SERR or NMI_IO_CHECK, the corresponding action is never performed until CondChgd bit is cleared. I noticed this behavior on systems with Ivy Bridge processors: Intel Xeon CPU E5-2630 v2 and Intel Xeon CPU E7-8890 v2. On both systems, CondChgd bit in MSR_CORE_PERF_GLOBAL_STATUS MSR has already been set in the beginning at boot. Then the CondChgd bit is immediately cleared by next wrmsr to MSR_CORE_PERF_GLOBAL_CTRL MSR and appears to remain 0. On the other hand, on older processors such as Nehalem, Xeon E7540, CondChgd bit is not set in the beginning at boot. I'm not sure about exact behavior of CondChgd bit, in particular when this bit is set. Although I read Intel System Programmer's Manual to figure out that, the descriptions I found are: In 18.9.1: "The MSR_PERF_GLOBAL_STATUS MSR also provides a ¡sticky bit¢ to indicate changes to the state of performancmonitoring hardware" In Table 35-2 IA-32 Architectural MSRs 63 CondChg: status bits of this register has changed. These are different from the bahviour I see on the actual system as I explained above. At least, I think ignoring CondChgd bit should be enough for NMI watchdog perspective. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20140625.103503.409316067.d.hatayama@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ipv4: fix buffer overflow in ip_options_compile()Eric Dumazet1-0/+4
[ Upstream commit 10ec9472f05b45c94db3c854d22581a20b97db41 ] There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29dns_resolver: assure that dns_query() result is null-terminatedManuel Schölling1-1/+3
[ Upstream commit 84a7c0b1db1c17d5ded8d3800228a608e1070b40 ] dns_query() credulously assumes that keys are null-terminated and returns a copy of a memory block that is off by one. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29sunvnet: clean up objects created in vnet_new() on vnet_exit()Sowmini Varadhan1-1/+19
[ Upstream commit a4b70a07ed12a71131cab7adce2ce91c71b37060 ] Nothing cleans up the objects created by vnet_new(), they are completely leaked. vnet_exit(), after doing the vio_unregister_driver() to clean up ports, should call a helper function that iterates over vnet_list and cleans up those objects. This includes unregister_netdevice() as well as free_netdev(). Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com> Reviewed-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: pppoe: use correct channel MTU when using Multilink PPPChristoph Schulz1-1/+1
[ Upstream commit a8a3e41c67d24eb12f9ab9680cbb85e24fcd9711 ] The PPP channel MTU is used with Multilink PPP when ppp_mp_explode() (see ppp_generic module) tries to determine how big a fragment might be. According to RFC 1661, the MTU excludes the 2-byte PPP protocol field, see the corresponding comment and code in ppp_mp_explode(): /* * hdrlen includes the 2-byte PPP protocol field, but the * MTU counts only the payload excluding the protocol field. * (RFC1661 Section 2) */ mtu = pch->chan->mtu - (hdrlen - 2); However, the pppoe module *does* include the PPP protocol field in the channel MTU, which is wrong as it causes the PPP payload to be 1-2 bytes too big under certain circumstances (one byte if PPP protocol compression is used, two otherwise), causing the generated Ethernet packets to be dropped. So the pppoe module has to subtract two bytes from the channel MTU. This error only manifests itself when using Multilink PPP, as otherwise the channel MTU is not used anywhere. In the following, I will describe how to reproduce this bug. We configure two pppd instances for multilink PPP over two PPPoE links, say eth2 and eth3, with a MTU of 1492 bytes for each link and a MRRU of 2976 bytes. (This MRRU is computed by adding the two link MTUs and subtracting the MP header twice, which is 4 bytes long.) The necessary pppd statements on both sides are "multilink mtu 1492 mru 1492 mrru 2976". On the client side, we additionally need "plugin rp-pppoe.so eth2" and "plugin rp-pppoe.so eth3", respectively; on the server side, we additionally need to start two pppoe-server instances to be able to establish two PPPoE sessions, one over eth2 and one over eth3. We set the MTU of the PPP network interface to the MRRU (2976) on both sides of the connection in order to make use of the higher bandwidth. (If we didn't do that, IP fragmentation would kick in, which we want to avoid.) Now we send a ICMPv4 echo request with a payload of 2948 bytes from client to server over the PPP link. This results in the following network packet: 2948 (echo payload) + 8 (ICMPv4 header) + 20 (IPv4 header) --------------------- 2976 (PPP payload) These 2976 bytes do not exceed the MTU of the PPP network interface, so the IP packet is not fragmented. Now the multilink PPP code in ppp_mp_explode() prepends one protocol byte (0x21 for IPv4), making the packet one byte bigger than the negotiated MRRU. So this packet would have to be divided in three fragments. But this does not happen as each link MTU is assumed to be two bytes larger. So this packet is diveded into two fragments only, one of size 1489 and one of size 1488. Now we have for that bigger fragment: 1489 (PPP payload) + 4 (MP header) + 2 (PPP protocol field for the MP payload (0x3d)) + 6 (PPPoE header) -------------------------- 1501 (Ethernet payload) This packet exceeds the link MTU and is discarded. If one configures the link MTU on the client side to 1501, one can see the discarded Ethernet frames with tcpdump running on the client. A ping -s 2948 -c 1 192.168.15.254 leads to the smaller fragment that is correctly received on the server side: (tcpdump -vvvne -i eth3 pppoes and ppp proto 0x3d) 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x3] MLPPP (0x003d), length 1494: seq 0x000, Flags [end], length 1492 and to the bigger fragment that is not received on the server side: (tcpdump -vvvne -i eth2 pppoes and ppp proto 0x3d) 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1515: PPPoE [ses 0x5] MLPPP (0x003d), length 1495: seq 0x000, Flags [begin], length 1493 With the patch below, we correctly obtain three fragments: 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [begin], length 1492 52:54:00:70:9e:89 > 52:54:00:5d:6f:b0, ethertype PPPoE S (0x8864), length 1514: PPPoE [ses 0x1] MLPPP (0x003d), length 1494: seq 0x000, Flags [none], length 1492 52:54:00:ad:87:fd > 52:54:00:79:5c:d0, ethertype PPPoE S (0x8864), length 27: PPPoE [ses 0x1] MLPPP (0x003d), length 7: seq 0x000, Flags [end], length 5 And the ICMPv4 echo request is successfully received at the server side: IP (tos 0x0, ttl 64, id 21925, offset 0, flags [DF], proto ICMP (1), length 2976) 192.168.222.2 > 192.168.15.254: ICMP echo request, id 30530, seq 0, length 2956 The bug was introduced in commit c9aa6895371b2a257401f59d3393c9f7ac5a8698 ("[PPPOE]: Advertise PPPoE MTU") from the very beginning. This patch applies to 3.10 upwards but the fix can be applied (with minor modifications) to kernels as old as 2.6.32. Signed-off-by: Christoph Schulz <develop@kristov.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: sctp: fix information leaks in ulpevent layerDaniel Borkmann1-107/+15
[ Upstream commit 8f2e5ae40ec193bc0a0ed99e95315c3eebca84ea ] While working on some other SCTP code, I noticed that some structures shared with user space are leaking uninitialized stack or heap buffer. In particular, struct sctp_sndrcvinfo has a 2 bytes hole between .sinfo_flags and .sinfo_ppid that remains unfilled by us in sctp_ulpevent_read_sndrcvinfo() when putting this into cmsg. But also struct sctp_remote_error contains a 2 bytes hole that we don't fill but place into a skb through skb_copy_expand() via sctp_ulpevent_make_remote_error(). Both structures are defined by the IETF in RFC6458: * Section 5.3.2. SCTP Header Information Structure: The sctp_sndrcvinfo structure is defined below: struct sctp_sndrcvinfo { uint16_t sinfo_stream; uint16_t sinfo_ssn; uint16_t sinfo_flags; <-- 2 bytes hole --> uint32_t sinfo_ppid; uint32_t sinfo_context; uint32_t sinfo_timetolive; uint32_t sinfo_tsn; uint32_t sinfo_cumtsn; sctp_assoc_t sinfo_assoc_id; }; * 6.1.3. SCTP_REMOTE_ERROR: A remote peer may send an Operation Error message to its peer. This message indicates a variety of error conditions on an association. The entire ERROR chunk as it appears on the wire is included in an SCTP_REMOTE_ERROR event. Please refer to the SCTP specification [RFC4960] and any extensions for a list of possible error formats. An SCTP error notification has the following format: struct sctp_remote_error { uint16_t sre_type; uint16_t sre_flags; uint32_t sre_length; uint16_t sre_error; <-- 2 bytes hole --> sctp_assoc_t sre_assoc_id; uint8_t sre_data[]; }; Fix this by setting both to 0 before filling them out. We also have other structures shared between user and kernel space in SCTP that contains holes (e.g. struct sctp_paddrthlds), but we copy that buffer over from user space first and thus don't need to care about it in that cases. While at it, we can also remove lengthy comments copied from the draft, instead, we update the comment with the correct RFC number where one can look it up. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tipc: clear 'next'-pointer of message fragments before reassemblyJon Paul Maloy1-0/+1
[ Upstream commit 999417549c16dd0e3a382aa9f6ae61688db03181 ] If the 'next' pointer of the last fragment buffer in a message is not zeroed before reassembly, we risk ending up with a corrupt message, since the reassembly function itself isn't doing this. Currently, when a buffer is retrieved from the deferred queue of the broadcast link, the next pointer is not cleared, with the result as described above. This commit corrects this, and thereby fixes a bug that may occur when long broadcast messages are transmitted across dual interfaces. The bug has been present since 40ba3cdf542a469aaa9083fa041656e59b109b90 ("tipc: message reassembly using fragment chain") This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29be2net: set EQ DB clear-intr bit in be_open()Suresh Reddy1-1/+1
[ Upstream commit 4cad9f3b61c7268fa89ab8096e23202300399b5d ] On BE3, if the clear-interrupt bit of the EQ doorbell is not set the first time it is armed, ocassionally we have observed that the EQ doesn't raise anymore interrupts even if it is in armed state. This patch fixes this by setting the clear-interrupt bit when EQs are armed for the first time in be_open(). Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29netlink: Fix handling of error from netlink_dump().Ben Pfaff1-2/+2
[ Upstream commit ac30ef832e6af0505b6f0251a6659adcfa74975e ] netlink_dump() returns a negative errno value on error. Until now, netlink_recvmsg() directly recorded that negative value in sk->sk_err, but that's wrong since sk_err takes positive errno values. (This manifests as userspace receiving a positive return value from the recv() system call, falsely indicating success.) This bug was introduced in the commit that started checking the netlink_dump() return value, commit b44d211 (netlink: handle errors from netlink_dump()). Multithreaded Netlink dumps are one way to trigger this behavior in practice, as described in the commit message for the userspace workaround posted here: http://openvswitch.org/pipermail/dev/2014-June/042339.html This commit also fixes the same bug in netlink_poll(), introduced in commit cd1df525d (netlink: add flow control for memory mapped I/O). Signed-off-by: Ben Pfaff <blp@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: mvneta: fix operation in 10 Mbit/s modeThomas Petazzoni1-1/+1
[ Upstream commit 4d12bc63ab5e48c1d78fa13883cf6fefcea3afb1 ] As reported by Maggie Mae Roxas, the mvneta driver doesn't behave properly in 10 Mbit/s mode. This is due to a misconfiguration of the MVNETA_GMAC_AUTONEG_CONFIG register: bit MVNETA_GMAC_CONFIG_MII_SPEED must be set for a 100 Mbit/s speed, but cleared for a 10 Mbit/s speed, which the driver was not properly doing. This commit adjusts that by setting the MVNETA_GMAC_CONFIG_MII_SPEED bit only in 100 Mbit/s mode, and relying on the fact that all the speed related bits of this register are cleared at the beginning of the mvneta_adjust_link() function. This problem exists since c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") which is the commit that introduced the mvneta driver in the kernel. Cc: <stable@vger.kernel.org> # v3.8+ Fixes: c5aff18204da0 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Reported-by: Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Cc: Maggie Mae Roxas <maggie.mae.roxas@gmail.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29appletalk: Fix socket referencing in skbAndrey Utkin1-3/+0
[ Upstream commit 36beddc272c111689f3042bf3d10a64d8a805f93 ] Setting just skb->sk without taking its reference and setting a destructor is invalid. However, in the places where this was done, skb is used in a way not requiring skb->sk setting. So dropping the setting of skb->sk. Thanks to Eric Dumazet <eric.dumazet@gmail.com> for correct solution. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79441 Reported-by: Ed Martin <edman007@edman007.com> Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tcp: fix false undo corner casesYuchung Cheng2-6/+8
[ Upstream commit 6e08d5e3c8236e7484229e46fdf92006e1dd4c49 ] The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29igmp: fix the problem when mc leave groupdingtianhong1-4/+6
[ Upstream commit 52ad353a5344f1f700c5b777175bdfa41d3cd65a ] The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: Fix NETDEV_CHANGE notifier usage causing spurious arp flushLoic Prylli1-1/+5
[ Upstream commit 54951194656e4853e441266fd095f880bc0398f3 ] A bug was introduced in NETDEV_CHANGE notifier sequence causing the arp table to be sometimes spuriously cleared (including manual arp entries marked permanent), upon network link carrier changes. The changed argument for the notifier was applied only to a single caller of NETDEV_CHANGE, missing among others netdev_state_change(). So upon net_carrier events induced by the network, which are triggering a call to netdev_state_change(), arp_netdev_event() would decide whether to clear or not arp cache based on random/junk stack values (a kind of read buffer overflow). Fixes: be9efd365328 ("net: pass changed flags along with NETDEV_CHANGE event") Fixes: 6c8b4e3ff81b ("arp: flush arp cache on IFF_NOARP change") Signed-off-by: Loic Prylli <loicp@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: qmi_wwan: add two Sierra Wireless/Netgear devicesBjørn Mork1-0/+2
[ Upstream commit 5343330010a892b76a97fd93ad3c455a4a32a7fb ] Add two device IDs found in an out-of-tree driver downloadable from Netgear. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: qmi_wwan: Add ID for Telewell TW-LTE 4G v2Bernd Wachter1-0/+1
[ Upstream commit 8dcb4b1526747d8431f9895e153dd478c9d16186 ] There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ipv4: icmp: Fix pMTU handling for rare caseEdward Allcutt1-2/+0
[ Upstream commit 68b7107b62983f2cff0948292429d5f5999df096 ] Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tcp: Fix divide by zero when pushing during tcp-repairChristoph Paasch1-1/+2
[ Upstream commit 5924f17a8a30c2ae18d034a86ee7581b34accef6 ] When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[<c1601359>] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [<c167f9d9>] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [<c16013e6>] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [<c1603b5a>] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [<c10a0188>] ? up+0x28/0x40 [ 347.152907] [<c10acc85>] ? console_unlock+0x295/0x480 [ 347.152907] [<c10ad24f>] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [<c1605716>] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [<c15f4860>] tcp_push+0xf0/0x120 [ 347.152907] [<c15f7641>] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [<c116d920>] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c114f0f0>] ? do_wp_page+0x3e0/0x850 [ 347.152907] [<c161c36a>] inet_sendmsg+0x4a/0xb0 [ 347.152907] [<c1150269>] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [<c15a006b>] sock_aio_write+0xbb/0xd0 [ 347.152907] [<c1180b79>] do_sync_write+0x69/0xa0 [ 347.152907] [<c1181023>] vfs_write+0x123/0x160 [ 347.152907] [<c1181d55>] SyS_write+0x55/0xb0 [ 347.152907] [<c167f0d8>] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec3423257508 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Fixes: ec3423257508 (tcp: fix retransmission in repair mode) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by: Andrew Vagin <avagin@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29bnx2x: fix possible panic under memory stressEric Dumazet1-1/+2
[ Upstream commit 07b0f00964def8af9321cfd6c4a7e84f6362f728 ] While it is legal to kfree(NULL), it is not wise to use : put_page(virt_to_head_page(NULL)) BUG: unable to handle kernel paging request at ffffeba400000000 IP: [<ffffffffc01f5928>] virt_to_head_page+0x36/0x44 [bnx2x] Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Fixes: d46d132cc021 ("bnx2x: use netdev_alloc_frag()") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fixEric Dumazet2-13/+14
[ Upstream commit 7f502361531e9eecb396cf99bdc9e9a59f7ebd7f ] We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5dfb296b ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 9cb3a50c5f63e ("ipv4: Invalidate the socket cached route on pmtu events if possible") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ipv4: fix dst race in sk_dst_get()Eric Dumazet2-7/+13
[ Upstream commit f88649721268999bdff09777847080a52004f691 ] When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dormando <dormando@rydia.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: fix UDP tunnel GSO of frag_list GRO packetsWei-Chun Chao1-1/+2
[ Upstream commit 5882a07c72093dc3a18e2d2b129fb200686bb6ee ] This patch fixes a kernel BUG_ON in skb_segment. It is hit when testing two VMs on openvswitch with one VM acting as VXLAN gateway. During VXLAN packet GSO, skb_segment is called with skb->data pointing to inner TCP payload. skb_segment calls skb_network_protocol to retrieve the inner protocol. skb_network_protocol actually expects skb->data to point to MAC and it calls pskb_may_pull with ETH_HLEN. This ends up pulling in ETH_HLEN data from header tail. As a result, pskb_trim logic is skipped and BUG_ON is hit later. Move skb_push in front of skb_network_protocol so that skb->data lines up properly. kernel BUG at net/core/skbuff.c:2999! Call Trace: [<ffffffff816ac412>] tcp_gso_segment+0x122/0x410 [<ffffffff816bc74c>] inet_gso_segment+0x13c/0x390 [<ffffffff8164b39b>] skb_mac_gso_segment+0x9b/0x170 [<ffffffff816b3658>] skb_udp_tunnel_segment+0xd8/0x390 [<ffffffff816b3c00>] udp4_ufo_fragment+0x120/0x140 [<ffffffff816bc74c>] inet_gso_segment+0x13c/0x390 [<ffffffff8109d742>] ? default_wake_function+0x12/0x20 [<ffffffff8164b39b>] skb_mac_gso_segment+0x9b/0x170 [<ffffffff8164b4d0>] __skb_gso_segment+0x60/0xc0 [<ffffffff8164b6b3>] dev_hard_start_xmit+0x183/0x550 [<ffffffff8166c91e>] sch_direct_xmit+0xfe/0x1d0 [<ffffffff8164bc94>] __dev_queue_xmit+0x214/0x4f0 [<ffffffff8164bf90>] dev_queue_xmit+0x10/0x20 [<ffffffff81687edb>] ip_finish_output+0x66b/0x890 [<ffffffff81688a58>] ip_output+0x58/0x90 [<ffffffff816c628f>] ? fib_table_lookup+0x29f/0x350 [<ffffffff816881c9>] ip_local_out_sk+0x39/0x50 [<ffffffff816cbfad>] iptunnel_xmit+0x10d/0x130 [<ffffffffa0212200>] vxlan_xmit_skb+0x1d0/0x330 [vxlan] [<ffffffffa02a3919>] vxlan_tnl_send+0x129/0x1a0 [openvswitch] [<ffffffffa02a2cd6>] ovs_vport_send+0x26/0xa0 [openvswitch] [<ffffffffa029931e>] do_output+0x2e/0x50 [openvswitch] Signed-off-by: Wei-Chun Chao <weichunc@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-298021q: fix a potential memory leakLi RongQing1-1/+4
[ Upstream commit 916c1689a09bc1ca81f2d7a34876f8d35aadd11b ] skb_cow called in vlan_reorder_header does not free the skb when it failed, and vlan_reorder_header returns NULL to reset original skb when it is called in vlan_untag, lead to a memory leak. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: sctp: check proc_dointvec result in proc_sctp_do_authDaniel Borkmann1-2/+1
[ Upstream commit 24599e61b7552673dd85971cf5a35369cd8c119e ] When writing to the sysctl field net.sctp.auth_enable, it can well be that the user buffer we handed over to proc_dointvec() via proc_sctp_do_auth() handler contains something other than integers. In that case, we would set an uninitialized 4-byte value from the stack to net->sctp.auth_enable that can be leaked back when reading the sysctl variable, and it can unintentionally turn auth_enable on/off based on the stack content since auth_enable is interpreted as a boolean. Fix it up by making sure proc_dointvec() returned sucessfully. Fixes: b14878ccb7fa ("net: sctp: cache auth_enable per endpoint") Reported-by: Florian Westphal <fwestpha@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tcp: fix tcp_match_skb_to_sack() for unaligned SACK at end of an skbNeal Cardwell1-1/+1
[ Upstream commit 2cd0d743b05e87445c54ca124a9916f22f16742e ] If there is an MSS change (or misbehaving receiver) that causes a SACK to arrive that covers the end of an skb but is less than one MSS, then tcp_match_skb_to_sack() was rounding up pkt_len to the full length of the skb ("Round if necessary..."), then chopping all bytes off the skb and creating a zero-byte skb in the write queue. This was visible now because the recently simplified TLP logic in bef1909ee3ed1c ("tcp: fixing TLP's FIN recovery") could find that 0-byte skb at the end of the write queue, and now that we do not check that skb's length we could send it as a TLP probe. Consider the following example scenario: mss: 1000 skb: seq: 0 end_seq: 4000 len: 4000 SACK: start_seq: 3999 end_seq: 4000 The tcp_match_skb_to_sack() code will compute: in_sack = false pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000 new_len += mss = 4000 Previously we would find the new_len > skb->len check failing, so we would fall through and set pkt_len = new_len = 4000 and chop off pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment afterward in the write queue. With this new commit, we notice that the new new_len >= skb->len check succeeds, so that we return without trying to fragment. Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29net: sctp: propagate sysctl errors from proc_do* properlyDaniel Borkmann1-10/+9
[ Upstream commit ff5e92c1affe7166b3f6e7073e648ed65a6e2e59 ] sysctl handler proc_sctp_do_hmac_alg(), proc_sctp_do_rto_min() and proc_sctp_do_rto_max() do not properly reflect some error cases when writing values via sysctl from internal proc functions such as proc_dointvec() and proc_dostring(). In all these cases we pass the test for write != 0 and partially do additional work just to notice that additional sanity checks fail and we return with hard-coded -EINVAL while proc_do* functions might also return different errors. So fix this up by simply testing a successful return of proc_do* right after calling it. This also allows to propagate its return value onwards to the user. While touching this, also fix up some minor style issues. Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Fixes: 3c68198e7511 ("sctp: Make hmac algorithm selection for cookie generation dynamic") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29slcan: Port write_wakeup deadlock fix from slipTyler Hall1-12/+29
[ Upstream commit a8e83b17536aad603fbeae4c460f2da0ee9fe6ed ] The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by: Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29ip_tunnel: fix ip_tunnel_lookupDmitry Popov1-4/+8
[ Upstream commit e0056593b61253f1a8a9941dacda22e73b963cdc ] This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29e1000e: Fix SHRA register access for 82579David Ertman2-2/+2
commit 96dee024ca4799d6d21588951240035c21ba1c67 upstream. Previous commit c3a0dce35af0 fixed an overrun for the RAR on i218 devices. This commit also attempted to homogenize the RAR/SHRA access for all parts accessed by the e1000e driver. This change introduced an error for assigning MAC addresses to guest OS's for 82579 devices. Only RAR[0] is accessible to the driver for 82579 parts, and additional addresses must be placed into the SHRA[L|H] registers. The rar_entry_count was changed in the previous commit to an inaccurate value that accounted for all RAR and SHRA registers, not just the ones usable by the driver. This patch fixes the count to the correct value and adjusts the e1000_rar_set_pch2lan() function to user the correct index. Cc: John Greene <jogreene@redhat.com> Signed-off-by: Dave Ertman <davidx.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "Alexander Y. Fomichev" <aleksandr.fomichev@x5.ru> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29iwlwifi: dvm: don't enable CTS to selfEmmanuel Grumbach1-12/+0
commit 43d826ca5979927131685cc2092c7ce862cb91cd upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29quota: missing lock in dqcache_shrink_scan()Niu Yawei1-0/+2
commit d68aab6b8f572406aa93b45ef6483934dd3b54a6 upstream. Commit 1ab6c4997e04 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. Fixes: 1ab6c4997e04a00c50c6d786c2f046adc0d1f5de Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29igb: do a reset on SR-IOV re-init if device is downStefan Assmann1-0/+2
commit 76252723e88681628a3dbb9c09c963e095476f73 upstream. To properly re-initialize SR-IOV it is necessary to reset the device even if it is already down. Not doing this may result in Tx unit hangs. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29igb: Workaround for i210 Errata 25: Slow System ClockTodd Fujinaka7-8/+113
commit 948264879b6894dc389a44b99fae4f0b72932619 upstream. On some devices, the internal PLL circuit occasionally provides the wrong clock frequency after power up. The probability of failure is less than one failure per 1000 power cycles. When the failure occurs, the internal clock frequency is around 1/20 of the correct frequency. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29hwmon: (adt7470) Fix writes to temperature limit registersGuenter Roeck1-3/+3
commit de12d6f4b10b21854441f5242dcb29ea96181e58 upstream. Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29hwmon: (da9052) Don't use dash in the name attributeAxel Lin1-1/+1
commit ee14b644daaa58afe1e91bb9ebd9cf1b18d1f5fa upstream. Dashes are not allowed in hwmon name attributes. Use "da9052" instead of "da9052-hwmon". Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29hwmon: (da9055) Don't use dash in the name attributeAxel Lin1-1/+1
commit 6b00f440dd678d786389a7100a2e03fe44478431 upstream. Dashes are not allowed in hwmon name attributes. Use "da9055" instead of "da9055-hwmon". Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tracing: Add TRACE_ITER_PRINTK flag check in __trace_puts/__trace_bputszhangwei(Jovi)1-0/+6
commit f0160a5a2912267c02cfe692eac955c360de5fdf upstream. The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing, so add it, to be consistent with __trace_printk/__trace_bprintk. Those functions are all called by the same function: trace_printk(). Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tracing: Add ftrace_trace_stack into __trace_puts/__trace_bputszhangwei(Jovi)1-2/+10
commit 8abfb8727f4a724d31f9ccfd8013fbd16d539445 upstream. Currently trace option stacktrace is not applicable for trace_printk with constant string argument, the reason is in __trace_puts/__trace_bputs ftrace_trace_stack is missing. In contrast, when using trace_printk with non constant string argument(will call into __trace_printk/__trace_bprintk), then trace option stacktrace is workable, this inconstant result will confuses users a lot. Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.com Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29tracing: Fix graph tracer with stack tracer on other archsSteven Rostedt (Red Hat)1-2/+2
commit 5f8bf2d263a20b986225ae1ed7d6759dc4b93af9 upstream. Running my ftrace tests on PowerPC, it failed the test that checks if function_graph tracer is affected by the stack tracer. It was. Looking into this, I found that the update_function_graph_func() must be called even if the trampoline function is not changed. This is because archs like PowerPC do not support ftrace_ops being passed by assembly and instead uses a helper function (what the trampoline function points to). Since this function is not changed even when multiple ftrace_ops are added to the code, the test that falls out before calling update_function_graph_func() will miss that the update must still be done. Call update_function_graph_function() for all calls to update_ftrace_function() Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29fuse: ignore entry-timeout on LOOKUP_REVALAnand Avati1-1/+2
commit 154210ccb3a871e631bf39fdeb7a8731d98af87b upstream. The following test case demonstrates the bug: sh# mount -t glusterfs localhost:meta-test /mnt/one sh# mount -t glusterfs localhost:meta-test /mnt/two sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file bash: /mnt/one/file: Stale file handle sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file On the second open() on /mnt/one, FUSE would have used the old nodeid (file handle) trying to re-open it. Gluster is returning -ESTALE. The ESTALE propagates back to namei.c:filename_lookup() where lookup is re-attempted with LOOKUP_REVAL. The right behavior now, would be for FUSE to ignore the entry-timeout and and do the up-call revalidation. Instead FUSE is ignoring LOOKUP_REVAL, succeeding the revalidation (because entry-timeout has not passed), and open() is again retried on the old file handle and finally the ESTALE is going back to the application. Fix: if revalidation is happening with LOOKUP_REVAL, then ignore entry-timeout and always do the up-call. Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29fuse: handle large user and group IDMiklos Szeredi1-4/+16
commit 233a01fa9c4c7c41238537e8db8434667ff28a2f upstream. If the number in "user_id=N" or "group_id=N" mount options was larger than INT_MAX then fuse returned EINVAL. Fix this to handle all valid uid/gid values. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29fuse: timeout comparison fixMiklos Szeredi1-3/+3
commit 126b9d4365b110c157bc4cbc32540dfa66c9c85a upstream. As suggested by checkpatch.pl, use time_before64() instead of direct comparison of jiffies64 values. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29Bluetooth: Ignore H5 non-link packets in non-active stateLoic Poulain1-0/+1
commit 48439d501e3d9e8634bdc0c418e066870039599d upstream. When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-07-29Drivers: hv: util: Fix a bug in the KVP codeK. Y. Srinivasan2-3/+13
commit 9bd2d0dfe4714dd5d7c09a93a5c9ea9e14ceb3fc upstream. Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 12:51:22 +0300