| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Kill host_hw_status and me_hw_state from me hw structure that used
to cache host and me csr values.
We do not use the cached values across the function calls anymore
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 783c8f4c8445 ("soc/tegra: Add efuse driver for Tegra") added a
fuse directory in drivers/misc along with a Makefile that were never
used. They were leftovers from an earlier version of the patch series.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If num_ballooned is not 0, we shouldn't neglect the
already-partially-allocated 2MB memory block(s).
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under high memory pressure and very high KVP R/W test pressure, the netlink
recvfrom() may transiently return ENOBUFS to the daemon -- we found this
during a 2-week stress test.
We'd better not terminate the daemon on the failure, because a typical KVP
user will re-try the R/W and hopefully it will succeed next time.
We can also ignore the errors on sending.
Cc: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of making a list of exceptions for readonly filesystems
in addition to iso9660 we already have it is better to skip freeze
operation for all readonly-mounted filesystems.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When ioctl(fd, FIFREEZE, 0) results in an error we cannot report it
to syslog instantly since that can cause write to a frozen disk.
However, the name of the filesystem which caused the error and errno
are valuable and we would like to get a nice human-readable message
in the log. Save errno before calling vss_operate(VSS_OP_THAW) and
report the error right after.
Unfortunately, FITHAW errors cannot be reported the same way as we
need to finish thawing all filesystems before calling syslog().
We should also avoid calling endmntent() for the second time in
case we encountered an error during freezing of '/' as it usually
results in SEGSEGV.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we fail to send a message to userspace daemon with cn_netlink_send()
there is no need to wait for userspace to reply as it is not going to
happen. This happens when kvp or vss daemon is stopped after a successful
handshake. Report HV_E_FAIL immediately and cancel the timeout job so
host won't receive two failures.
Use pr_warn() for VSS and pr_debug() for KVP deliberately as VSS request
are rare and result in a failed backup. KVP requests are much more frequent
after a successful handshake so avoid flooding logs. It would be nice to
have an ability to de-negotiate with the host in case userspace daemon gets
disconnected so we won't receive new requests. But I'm not sure it is
possible.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In contrast with KVP there is no timeout when communicating with
userspace VSS daemon. In case it gets stuck performing freeze/thaw
operation no message will be sent to the host so it will take very
long (around 10 minutes) before backup fails. Introduce 10 second
timeout using schedule_delayed_work().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing
Update extcon for v3.19
This patchset fix minor issue of extcon driver.
Detailed description for patchset:
- Fix typo and change jig cable name of extcon-max77693.c
- Update the extcon_get_edev_by_phandle() because previous extcon_get_edev_by_phandle()
considered the platform device driver. So, this modification supports
OF-based extcon lookup method by using the list of extcon devices.
|
|
Fix a typo in name of company in copyright comment.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
When JIG was set to "boot on" mode, the UART connection did not work
because it was assigned to Dock-Car cable (path: audio), not JIG-UART-ON
cable.
This was introduced in 39bf369e4ed3 ("extcon: max77693: Add support dock
device and buttons") while adding dock features.
Assign the JIG-UART-ON back to UART path.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[cw00.choi: Modify the patch name to remove specific board name]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Platform bus is not the only way to have extcon devices, so current
implementation of of_extcon_get_extcon_dev() is broken. Also using
parent device node only to get device name is quite ugly.
This patch reimplements of_extcon_get_extcon_dev() to do exactly the
same as extcon_get_extcon_dev() but instead of comparing names, compare
node pointers.
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
[mszyprow: simplified the code]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This reverts commit 32eca22180804f71b06b63fd29b72f58be8b3c47.
Changing core kernel code to operate in a different manner, without a
build-time breakage is tough to do and ensure you got it right. There
are lots of problems popping up due to this change, so let's revert it
for now as it is not safe to merge to the tree at this point in time.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 2bfeeca107591134bf9a40945c50d337bf858612.
Not needed after the next patch is applied.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 965ab29ba09d75056a6c9b0f707cd1c2cc91188f.
This is causing way more problems than it is worth.
Cc: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch improves the detection of defects by updating the
regular expression to find Kconfig identifiers in the source
code, and fixes some cases of false positives. The following
changes are made:
- improve regex to find Kconfig identifiers in the source
- exclude .log files from analysis
- improve filtering of false positives (e.g, CONFIG_XXX)
- change output format from (feature:\tlist) to (feature\tlist)
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removing minimal support for etb/etm to favour an implementation
that is more flexible, extensible and capable of handling more
platforms.
Also removing the only client of the old driver. That code can
easily be replaced by entries for etb/etm in the device tree.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Support for 16 PTMs, funnel, TPIU and replicator connected
to the ETB are included.
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Support for the 2 PTMs, 3 ETMs, funnel, TPIU and replicator
connected to the ETB are included. Proper handling of the
ITM and the replicator linked to it along with the CTIs
and SWO are not included.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently supporting ETM and ETB. Support for TPIU
and SDTI are yet to be added.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Documentation containing an explanation on what the framework
provides and the drivers working with it. A minimal example
on how to use the functionality is also provided.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages CoreSight ETM (Embedded Trace Macrocell) that
supports processor tracing. Currently supported version are ARM
ETMv3.x and PTM1.x.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
coresight-etm3x: adding missing error checking
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages non-configurable CoreSight Replicator that
takes a single input trace data stream and replicates it to
produce two identical trace data output streams. Replicators
are typically used to route single interleaved trace data
stream to two or more sinks.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages CoreSight Funnel which acts as a link.
Funnels have multiple input ports (typically 8) each of which
represents an input trace data stream. These multiple input trace
data streams are interleaved into a single output stream coming
out of the Funnel.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages CoreSight ETB (Embedded Trace Buffer) which
acts as a circular buffer sink collecting generated trace data.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages CoreSight TPIU (Trace Port Interface Unit)
which acts as a sink. TPIU is typically connected to some offchip
hardware hosting a storage buffer.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver manages CoreSight TMC (Trace Memory Controller) which
can act as a link or a sink depending upon its configuration. It
can present itself as an ETF (Embedded Trace FIFO) or ETR
(Embedded Trace Router).
ETF when configured in circular buffer mode acts as a trace
collection sink. When configured in HW fifo mode it acts as link.
ETR always acts as a sink and can be used to route data to memory
allocated in RAM.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CoreSight components are compliant with the ARM CoreSight
architecture specification and can be connected in various
topologies to suit a particular SoC tracing needs. These trace
components can generally be classified as sources, links and
sinks. Trace data produced by one or more sources flows through
the intermediate links connecting the source to the currently
selected sink.
The CoreSight framework provides an interface for the CoreSight trace
drivers to register themselves with. It's intended to build up a
topological view of the CoreSight components and configure the
correct serie of components on user input via sysfs.
For eg., when enabling a source, the framework builds up a path
consisting of all the components connecting the source to the
currently selected sink(s) and enables all of them.
The framework also supports switching between available sinks
and provides status information to user space applications
through the debugfs interface.
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit bb34cb6bbd287b57e955bc5cfd42fcde6aaca279.
Wrong patch for the wrong branch, sorry for the noise...
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All other sa1111 platforms pass sa1111_dev instance to platform-specific
code. Follow this approach for Jornada720 platform code.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pass sa1111_dev to platform-specific init code, as it is done by lubbock
and neponset. This removes a compilation warnings:
drivers/pcmcia/sa1111_badge4.c: In function 'pcmcia_badge4_init':
drivers/pcmcia/sa1111_badge4.c:147:5: warning: passing argument 1 of 'sa1111_pcmcia_add' from incompatible pointer type [enabled by default]
In file included from drivers/pcmcia/sa1111_badge4.c:26:0:
drivers/pcmcia/sa1111_generic.h:15:5: note: expected 'struct sa1111_dev *' but argument is of type 'struct device *'
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 32 bit addition "(hangcheck_margin + hangcheck_tick)" could
potentially overflow. It triggers a static checker warning to have an
overflowed addition followed by a no-op cast. I have moved the cast so
that the addition can't overflow.
Also I removed the unneeded cast on the following line since both
"hangcheck_tsc_margin" and "TIMER_FREQ" are already 64 bit types.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the
following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from 0x81: err=-110.
[ 31.504168] 0x81: count=-110, status:
[ 31.613404] Failed to read 1-wire data from 0x81: err=-110.
[ 31.621915] 0x81: count=-110, status:
[ 43.260968] Failed to read 1-wire data from 0x81: err=-110.
[ 43.270998] 0x81: count=-110, status:
[ 43.379959] Failed to read 1-wire data from 0x81: err=-110.
[ 43.388854] 0x81: count=-110, status:
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bus_find_device_by_name() acquires a device reference which is never
released. This results in an object leak, which on older kernels
results in failure to release all resources of PCI devices. libvirt
uses drivers_probe to re-attach devices to the host after assignment
and is therefore a common trigger for this leak.
Example:
# cd /sys/bus/pci/
# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79cd0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
kobject: '0000:01:10.0' (ffff8801d79cd0a8): kobject_cleanup, parent (null)
kobject: '0000:01:10.0' (ffff8801d79cd0a8): calling ktype release
kobject: '0000:01:10.0': free name
[kobject freed as expected]
# dmesg -C
# echo 1 > devices/0000\:01\:00.0/sriov_numvfs
# echo 0000:01:10.0 > drivers_probe
# echo 0 > devices/0000\:01\:00.0/sriov_numvfs
# dmesg | grep 01:10
pci 0000:01:10.0: [8086:10ca] type 00 class 0x020000
kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_add_internal: parent: '0000:00:01.0', set: 'devices'
kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
kobject: '0000:01:10.0' (ffff8801d79ce0a8): kobject_uevent_env
kobject: '0000:01:10.0' (ffff8801d79ce0a8): fill_kobj_path: path = '/devices/pci0000:00/0000:00:01.0/0000:01:10.0'
[no free]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pch_phub_save_reg_conf() and pch_phub_restore_reg_conf() functions
are only used for suspend/resume support (i.e. when PM is enabled). If
PM is disabled they don't need to be built.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`genwqe_user_vmap()` calls `get_user_pages_fast()` and if the return
value is less than the number of pages requested, it frees the pages and
returns an error (`-EFAULT`). However, it fails to consider a negative
error return value from `get_user_pages_fast()`. In that case, the test
`if (rc < m->nr_pages)` will be false (due to promotion of `rc` to a
large `unsigned int`) and the code will continue on to call
`genwqe_map_pages()` with an invalid list of page pointers. Fix it by
bailing out if `get_user_pages_fast()` returns a negative error value.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.14.x # 3.15.x # 3.16.x # 3.17.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
an open syscall now assignes file->private_data to a pointer to the
miscdevice structure. This reminds driver developers not to duplicate
code if they need this.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
the miscdevice core now does the work in any case.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As of now, a miscdevice driver has to provide an implementation of
the open() file operation if it wants to have misc_open() assign a
pointer to struct miscdevice to file->private_data for other file
operations to use (given the user calls open()).
This leads to situations where a miscdevice driver that doesn't need
internal operations during open() has to implement open() that only
returns immediately, in order to use the data in private_data in other
fops.
This provides consistent behaviour for miscdevice developers and will
always provide the pointer in private_data. A driver's open() fop would,
of course, just overwrite it, when using private_data itself.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When build with Debug the following crash is sometimes observed:
Call Trace:
[<ffffffff812b9600>] string+0x40/0x100
[<ffffffff812bb038>] vsnprintf+0x218/0x5e0
[<ffffffff810baf7d>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff812bb4c1>] vscnprintf+0x11/0x30
[<ffffffff8107a2f0>] vprintk+0xd0/0x5c0
[<ffffffffa0051ea0>] ? vmbus_process_rescind_offer+0x0/0x110 [hv_vmbus]
[<ffffffff8155c71c>] printk+0x41/0x45
[<ffffffffa004ebac>] vmbus_device_unregister+0x2c/0x40 [hv_vmbus]
[<ffffffffa0051ecb>] vmbus_process_rescind_offer+0x2b/0x110 [hv_vmbus]
...
This happens due to the following race: between 'if (channel->device_obj)' check
in vmbus_process_rescind_offer() and pr_debug() in vmbus_device_unregister() the
device can disappear. Fix the issue by taking an additional reference to the
device before proceeding to vmbus_device_unregister().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
An attempt to fix fcopy on i586 (bc5a5b0 Drivers: hv: util: Properly pack the data
for file copy functionality) led to a regression on x86_64 (and actually didn't fix
i586 breakage). Fcopy messages from Hyper-V host come in the following format:
struct do_fcopy_hdr | 36 bytes
0000 | 4 bytes
offset | 8 bytes
size | 4 bytes
data | 6144 bytes
On x86_64 struct hv_do_fcopy matched this format without ' __attribute__((packed))'
and on i586 adding ' __attribute__((packed))' to it doesn't change anything. Keep
the structure packed and add padding to match re reality. Tested both i586 and x86_64
on Hyper-V Server 2012 R2.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All tools/hv daemons do mandatory daemon() on startup. However, no pidfile
is created, this make it difficult for an init system to track such daemons.
Modern linux distros use systemd as their init system. It can handle the
daemonizing by itself, however, it requires a daemon to stay in foreground
for that. Some distros already carry distro-specific patch for hv tools
which switches off daemon().
Introduce -n/--no-daemon option for all 3 daemons in hv/tools. Parse options
with getopt() to make this part easily expandable.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a partition appears mounted more than once in /proc/mounts, vss_do_freeze()
succeeds only for the first time and gets EBUSY (on freeze) or EINVAL (on
thaw) for the second time. The patch ignores these to make the backup feature
work.
Also improved the error handling in case a freeze operation fails.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is a completion to 27a90700a4275c5178b883b65927affdafa5185c
The size field is also increased to allow values larger than 32 bits
on platforms that have more than 32 bit physical addresses.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As in 4f452e8aa492c0b8028ca9b4bdb4d018ba28c6c7, use resource_size_t
to accomodate sizes greater than the size of an unsigned long int on
platforms that have more than 32 bit physical addresses.
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We have MEI_HBM_STARTED in two contexts one
after start message was received and second
after enumeration was completed.
Because after start message reception we move
immediately to the enumeration state, we need
only the later meaning.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
NFC internal structure cleaning was dropped by commit
commit 487056932d372cc4f6c636f21a928d6667b151d7
Author: Tomas Winkler <tomas.winkler@intel.com>
Date: Mon Feb 17 15:13:19 2014 +0200
mei: Remove all bus devices from the mei_dev list when stopping the MEI
When stopping the MEI, we should remove and potentially unregister
all bus devices queued on the mei_dev linked list.
We allocate nfc_dev and free it across the reset
so we do not keep it in dirty state
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds MODULE_DEVICE_TABLE macro so i8k.ko module can be automatically
loaded based on dmi system alias.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Dell Latitude E6440 needs same settings as E6540.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The scripts/checkkconfigsymbols.sh script searches Kconfig features
in the source code that are not defined in Kconfig. Such identifiers
always evaluate to false and are the source of various kinds of bugs.
However, the shell script is slow and it does not detect such broken
references in Kbuild and Kconfig files (e.g., ``depends on UNDEFINED´´).
Furthermore, it generates false positives. The script is also hard to
read and understand, and is thereby difficult to maintain.
This patch replaces the shell script with an implementation in Python,
which:
(a) detects the same bugs, but does not report previous false positives
(b) additionally detects broken references in Kconfig and all
non-Kconfig files, such as Kbuild, .[cSh], .txt, .sh, defconfig, etc.
(c) is up to 75 times faster than the shell script
(d) only checks files under version control
The new script reduces the runtime on my machine (i7-2620M, 8GB RAM, SSD)
from 3m47s to 0m3s, and reports 938 broken references in Linux v3.17-rc1;
419 additional reports of which 16 are located in Kconfig files,
287 in defconfigs, 63 in ./Documentation, 1 in Kbuild.
Moreover, we intentionally include references in comments, which have been
ignored until now. Such comments may be leftovers of features that have
been removed or renamed in Kconfig (e.g., ``#endif /* CONFIG_MPC52xx */´´).
These references can be misleading and should be removed or replaced.
Note that the output format changed from (file list <tab> feature) to
(feature <tab> file list) as it simplifies the detection of the Kconfig
feature for long file lists.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Stefan Hengelein <stefan.hengelein@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
