summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-22mtd: spi-nor: add SFDP fixups for Quad Page ProgramSudip Mukherjee3-0/+9
SFDP table of some flash chips do not advertise support of Quad Input Page Program even though it has support. Use flags and add hardware cap for these chips. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com> [tudor.ambarus@microchip.com: move pp setting in spi_nor_init_default_params] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220920184808.44876-2-sudip.mukherjee@sifive.com
2022-11-22mtd: spi-nor: issi: is25wp256: Init flash based on SFDPSudip Mukherjee1-2/+2
The datasheet of is25wp256 says it supports SFDP. Get rid of the static initialization of the flash parameters and init them when parsing SFDP. Testing showed the flash using SPINOR_OP_READ_1_1_4_4B 0x6c, SPINOR_OP_PP_4B 0x12 and SPINOR_OP_BE_4K_4B 0x21 before enabling SFDP. After this patch, it parses the SFDP information and still uses the same opcodes. Set sector_size and n_sectors to zero as they will be discovered when parsing SFDP. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com> [tudor.ambarus@microchip.com: set sector_size and n_sectors to zero] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220920184808.44876-1-sudip.mukherjee@sifive.com
2022-11-21mtd: spi-nor: winbond: add support for W25Q512NW-IQJae Hyun Yoo1-0/+3
Add support for Winbond W25Q512NW-IQ/IN Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://www.winbond.com/resource-files/W25Q512NW%20RevB%2007192021.pdf Link: https://lore.kernel.org/r/20220716000643.3541839-2-quic_jaehyoo@quicinc.com
2022-11-21mtd: spi-nor: micron-st: Enable locking for mt25qu256aEliav Farber1-0/+2
mt25qu256a [1] uses the 4 bit Block Protection scheme and supports Top/Bottom protection via the BP and TB bits of the Status Register. BP3 is located in bit 6 of the Status Register. Tested on MT25QU256ABA8ESF-0SIT. [1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20221020092058.33844-1-farbere@amazon.com
2022-11-21mtd: spi-nor: Fix the number of bytes for the dummy cyclesAllen-KH Cheng1-1/+2
The number of bytes used by spi_nor_spimem_check_readop() may be incorrect for the dummy cycles. Since nor->read_dummy is not initialized before spi_nor_spimem_adjust_hwcaps(). We use both mode and wait state clock cycles instead of nor->read_dummy. Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Dhruva Gole <d-gole@ti.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
2022-11-21mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with ↵Yaliang Wang1-7/+17
gd25q256_post_bfpt When utilizing PARSE_SFDP to initialize the flash parameter, the deprecated initializing method spi_nor_init_params_deprecated() and the function spi_nor_manufacturer_init_params() within it will never be executed, which results in the default_init hook function will also never be executed. This is okay for 'D' generation of GD25Q256, because 'D' generation is implementing the JESD216B standards, it has QER field defined in BFPT, parsing the SFDP can properly set the quad_enable function. The 'E' generation also implements the JESD216B standards, and it has the same status register definitions as 'D' generation, parsing the SFDP to set the quad_enable function should also work for 'E' generation. However, the same thing can't apply to 'C' generation. 'C' generation 'GD25Q256C' implements the JESD216 standards, and it doesn't have the QER field defined in BFPT, since it does have QE bit in status register 1, the quad_enable hook needs to be tweaked to properly set the quad_enable function, this can be done in post_bfpt fixup hook. Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> [tudor.ambarus@microchip.com: Update comment in gd25q256_post_bfpt] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221016171901.1483542-2-yaliang.wang@windriver.com
2022-11-21mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc commentJonathan Neuschäfer1-2/+1
It doesn't make sense to put "set" on its own line like that. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20221101162906.990125-1-j.neuschaefer@gmx.net
2022-11-21mtd: spi-nor: sysfs: print JEDEC ID for generic flash driverMichael Walle1-2/+4
We don't have a database entry for the generic SPI-NOR flash driver and thus we don't have a JEDEC ID to print. Print the (cached) JEDEC ID instead. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-8-michael@walle.cc
2022-11-21mtd: spi-nor: add generic flash driverMichael Walle3-2/+52
Our SFDP parsing is everything we need to support all basic operations of a flash device. If the flash isn't found in our in-kernel flash database, gracefully fall back to a driver described solely by its SFDP tables. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-7-michael@walle.cc
2022-11-21mtd: spi-nor: fix select_uniform_erase to skip 0 erase sizeMichael Walle1-0/+4
4bait will set the erase size to 0 if there is no corresponding opcode for the 4byte erase. Fix spi_nor_select_uniform_erase to skip the 0 erase size to avoid mtd device registration failure cases. Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220810220654.1297699-6-michael@walle.cc
2022-11-21mtd: spi-nor: move function declaration out of sfdp.hMichael Walle2-2/+2
sfdp.h should only contain constants related to the JEDEC SFDP specification(s). Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-5-michael@walle.cc
2022-11-21mtd: spi-nor: remember full JEDEC flash IDMichael Walle3-1/+9
At the moment, we print the JEDEC ID that is stored in our database. The generic flash support won't have such an entry in our database. To find out the JEDEC ID later we will have to cache it. There is also another advantage: If the flash is found in the database, the ID could be truncated because the ID of the entry is used which can be shorter. Some flashes still holds valuable information in the bytes after the JEDEC ID and come in handy during debugging of when coping with INFO6() entries. These are not accessible for now. Save a copy of the ID bytes after reading and display it via debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-4-michael@walle.cc
2022-11-21mtd: spi-nor: sysfs: hide manufacturer if it is not setMichael Walle2-0/+5
The manufacturer may be optional when pure SFDP flashes are supported. Hide the sysfs property if no manufacturer is set. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-3-michael@walle.cc
2022-11-21mtd: spi-nor: hide jedec_id sysfs attribute if not presentMichael Walle2-0/+17
Some non-jedec compliant flashes (like the Everspin flashes) don't have an ID at all. Hide the attribute in this case. Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
2022-11-21mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()Alexander Sverdlin1-0/+2
Erase can be zeroed in spi_nor_parse_4bait() or spi_nor_init_non_uniform_erase_map(). In practice it happened with mt25qu256a, which supports 4K, 32K, 64K erases with 3b address commands, but only 4K and 64K erase with 4b address commands. Fixes: dc92843159a7 ("mtd: spi-nor: fix erase_type array to indicate current map conf") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211119081412.29732-1-alexander.sverdlin@nokia.com
2022-10-25mtd: spi-nor: core: Add an error message when failing to exit the 4-byte ↵Tudor Ambarus1-2/+12
address mode Add an error message when failing to exit the 4-byte address mode. Do not stop the execution and go through the spi_nor_soft_reset() method if used, in the hope that the flash will default to 3-byte address mode after the reset. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220728030159.68680-1-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: micron-st.c: Replace hardcoded values for ↵Tudor Ambarus1-3/+7
addr_nbytes/addr_mode_nbytes We track in the core the internal address mode of the flash. Stop using hardcoded values for the number of bytes of address and use nor->addr_nbytes and nor->params->addr_mode_nbytes instead. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220728041451.85559-3-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: spansion: Replace hardcoded values for ↵Tudor Ambarus1-5/+11
addr_nbytes/addr_mode_nbytes We track in the core the internal address mode of the flash. Stop using hardcoded values for the number of bytes of address and use nor->addr_nbytes and nor->params->addr_mode_nbytes instead. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220728041451.85559-2-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: spansion: Add s28hl512t, s28hl01gt, and s28hs01gt infoTakahiro Kuwano1-0/+12
Add flash info table entries for s28hl512gt, s28hl01gt, and s28hs01gt. These devices have the same functionality as s28hs512t. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/6350ac204c58b94b30d70c529bf194d953085ac6.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: spansion: Rename s28hs512t prefixTakahiro Kuwano1-10/+10
Change prefix to support all other devices in SEMPER S28 family. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/8cf6bc9bffd50e486867c0817de1fa56c5d308ec.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: spansion: Remove NO_SFDP_FLAGS from s28hs512t infoTakahiro Kuwano1-9/+8
Read, Page Program, and Sector Erase settings are done in SFDP so we can remove NO_SFDP_FLAGS from s28hs512t info. Since the default_init() is no longer called after removing NO_SFDP_FLAGS, the initialization in the default_init() is moved to late_init(). Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/12e468992f5d0cbd474abff3203100cc8163d4e5.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: sfdp: Update params->hwcaps.mask at xSPI profile 1.0 table parseTakahiro Kuwano1-0/+7
Existece of xSPI profile 1.0 table implies that the flash supports read and program in 8D-8D-8D mode. Update the params->hwcaps.mask in spi_nor_parase_profile1(). Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1b449bae6978f11f7636f2b5acb6435723963f59.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: Add support for flash resetSai Krishna Potthuri1-0/+25
Add support for spi-nor flash reset via GPIO controller by reading the reset-gpio property. If there is a valid GPIO specifier then reset will be performed by asserting and deasserting the GPIO using gpiod APIs otherwise it will not perform any operation. Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220908064428.2962-3-sai.krishna.potthuri@amd.com
2022-10-25dt-bindings: mtd: spi-nor: Add reset-gpios propertySai Krishna Potthuri1-0/+8
SPI-NOR flashes have RESET pin which can be toggled using GPIO controller, for those platforms reset-gpios property can be used to reset the flash device. Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220908064428.2962-2-sai.krishna.potthuri@amd.com
2022-10-24Linux 6.1-rc2v6.1-rc2Linus Torvalds1-1/+1
2022-10-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds18-99/+180
Pull kvm fixes from Paolo Bonzini: "RISC-V: - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc ARM: - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes x86: - add compat implementation for KVM_X86_SET_MSR_FILTER ioctl selftests: - synchronize includes between include/uapi and tools/include/uapi" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: tools: include: sync include/api/linux/kvm.h KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter() kvm: Add support for arch compat vm ioctls RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc RISC-V: Fix compilation without RISCV_ISA_ZICBOM KVM: arm64: vgic: Fix exit condition in scan_its_table() KVM: arm64: nvhe: Fix build with profile optimization KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test KVM: arm64: selftests: Fix multiple versions of GIC creation KVM: arm64: Enable stack protection and branch profiling for VHE KVM: arm64: Limit stage2_apply_range() batch size to largest block KVM: arm64: Work out supported block level at compile time
2022-10-23Revert "mfd: syscon: Remove repetition of the regmap_get_val_endian()"Jason A. Donenfeld1-0/+8
This reverts commit 72a95859728a7866522e6633818bebc1c2519b17. It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances, which use the syscon driver. Little-endian is not effected, which means likely it's important to handle regmap_get_val_endian() in this function after all. Fixes: 72a95859728a ("mfd: syscon: Remove repetition of the regmap_get_val_endian()") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Lee Jones <lee@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-23kernel/utsname_sysctl.c: Fix hostname pollingLinus Torvalds2-0/+2
Commit bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") added a new entry to the uts_kern_table[] array, but didn't update the UTS_PROC_xyz enumerators of older entries, breaking anything that used them. Which is admittedly not many cases: it's really just the two uses of uts_proc_notify() in kernel/sys.c. But apparently journald-systemd actually uses this to detect hostname changes. Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Fixes: bfca3dd3d068 ("kernel/utsname_sysctl.c: print kernel arch") Link: https://lore.kernel.org/lkml/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Link: https://linux-regtracking.leemhuis.info/regzbot/regression/0c2b92a6-0f25-9538-178f-eee3b06da23f@secunet.com/ Cc: Petr Vorel <pvorel@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-23Merge tag 'perf_urgent_for_v6.1_rc2' of ↵Linus Torvalds5-46/+163
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Fix raw data handling when perf events are used in bpf - Rework how SIGTRAPs get delivered to events to address a bunch of problems with it. Add a selftest for that too * tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bpf: Fix sample_flags for bpf_perf_event_output selftests/perf_events: Add a SIGTRAP stress test with disables perf: Fix missing SIGTRAPs
2022-10-23Merge tag 'sched_urgent_for_v6.1_rc2' of ↵Linus Torvalds4-29/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Adjust code to not trip up CFI - Fix sched group cookie matching * tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Introduce struct balance_callback to avoid CFI mismatches sched/core: Fix comparison in sched_group_cookie_match()
2022-10-23Merge tag 'objtool_urgent_for_v6.1_rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: - Fix ORC stack unwinding when GCOV is enabled * tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fix unreliable stack dump with gcov
2022-10-23Merge tag 'x86_urgent_for_v6.0_rc2' of ↵Linus Torvalds11-86/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "As usually the case, right after a major release, the tip urgent branches accumulate a couple more fixes than normal. And here is the x86, a bit bigger, urgent pile. - Use the correct CPU capability clearing function on the error path in Intel perf LBR - A CFI fix to ftrace along with a simplification - Adjust handling of zero capacity bit mask for resctrl cache allocation on AMD - A fix to the AMD microcode loader to attempt patch application on every logical thread - A couple of topology fixes to handle CPUID leaf 0x1f enumeration info properly - Drop a -mabi=ms compiler option check as both compilers support it now anyway - A couple of fixes to how the initial, statically allocated FPU buffer state is setup and its interaction with dynamic states at runtime" * tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap() ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph() x86/ftrace: Remove ftrace_epilogue() x86/resctrl: Fix min_cbm_bits for AMD x86/microcode/AMD: Apply the patch early on every logical thread x86/topology: Fix duplicated core ID within a package x86/topology: Fix multiple packages shown on a single-package system hwmon/coretemp: Handle large core ID value x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB x86/fpu: Exclude dynamic states from init_fpstate x86/fpu: Fix the init_fpstate size check with the actual size x86/fpu: Configure init_fpstate attributes orderly
2022-10-23Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linuxLinus Torvalds4-0/+7
Pull io_uring follow-up from Jens Axboe: "Currently the zero-copy has automatic fallback to normal transmit, and it was decided that it'd be cleaner to return an error instead if the socket type doesn't support it. Zero-copy does work with UDP and TCP, it's more of a future proofing kind of thing (eg for samba)" * tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux: io_uring/net: fail zc sendmsg when unsupported by socket io_uring/net: fail zc send when unsupported by socket net: flag sockets supporting msghdr originated zerocopy
2022-10-23Merge tag 'hwmon-for-v6.1-rc2' of ↵Linus Torvalds3-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - corsair-psu: Fix typo in USB id description, and add USB ID for new PSU - pwm-fan: Fix fan power handling when disabling fan control * tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (corsair-psu) Add USB id of the new HX1500i psu hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 hwmon: (corsair-psu) fix typo in USB id description
2022-10-23Merge tag 'i2c-for-6.1-rc2' of ↵Linus Torvalds6-16/+12
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "RPM fix for qcom-cci, platform module alias for xiic, build warning fix for mlxbf, typo fixes in comments" * tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxbf: depend on ACPI; clean away ifdeffage i2c: fix spelling typos in comments i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter i2c: xiic: Add platform module alias
2022-10-23Merge tag 'pci-v6.1-fixes-2' of ↵Linus Torvalds2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Revert a simplification that broke pci-tegra due to a masking error - Update MAINTAINERS for Kishon's email address change and TI DRA7XX/J721E maintainer change * tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
2022-10-23Merge tag 'media/v6.1-2' of ↵Linus Torvalds132-3873/+3193
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-22io_uring/net: fail zc sendmsg when unsupported by socketPavel Begunkov1-0/+2
The previous patch fails zerocopy send requests for protocols that don't support it, do the same for zerocopy sendmsg. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0854e7bb4c3d810a48ec8b5853e2f61af36a0467.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-22io_uring/net: fail zc send when unsupported by socketPavel Begunkov1-0/+2
If a protocol doesn't support zerocopy it will silently fall back to copying. This type of behaviour has always been a source of troubles so it's better to fail such requests instead. Cc: <stable@vger.kernel.org> # 6.0 Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/2db3c7f16bb6efab4b04569cd16e6242b40c5cb3.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-22net: flag sockets supporting msghdr originated zerocopyPavel Begunkov3-0/+3
We need an efficient way in io_uring to check whether a socket supports zerocopy with msghdr provided ubuf_info. Add a new flag into the struct socket flags fields. Cc: <stable@vger.kernel.org> # 6.0 Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/3dafafab822b1c66308bb58a0ac738b1e3f53f74.1666346426.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-22hwmon: (corsair-psu) Add USB id of the new HX1500i psuWilken Gottwalt2-0/+3
Also update the documentation accordingly. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/Y0FghqQCHG/cX5Jz@monster.localdomain Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-10-22tools: include: sync include/api/linux/kvm.hPaolo Bonzini1-0/+1
Provide a definition of KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Fixes: 17601bfed909 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option") Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-22KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTERAlexander Graf1-0/+56
The KVM_X86_SET_MSR_FILTER ioctls contains a pointer in the passed in struct which means it has a different struct size depending on whether it gets called from 32bit or 64bit code. This patch introduces compat code that converts from the 32bit struct to its 64bit counterpart which then gets used going forward internally. With this applied, 32bit QEMU can successfully set MSR bitmaps when running on 64bit kernels. Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com> Fixes: 1a155254ff937 ("KVM: x86: Introduce MSR filtering") Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20221017184541.2658-4-graf@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-22KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()Alexander Graf1-14/+17
In the next patch we want to introduce a second caller to set_msr_filter() which constructs its own filter list on the stack. Refactor the original function so it takes it as argument instead of reading it through copy_from_user(). Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20221017184541.2658-3-graf@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-22kvm: Add support for arch compat vm ioctlsAlexander Graf2-0/+13
We will introduce the first architecture specific compat vm ioctl in the next patch. Add all necessary boilerplate to allow architectures to override compat vm ioctls when necessary. Signed-off-by: Alexander Graf <graf@amazon.com> Message-Id: <20221017184541.2658-2-graf@amazon.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-22Merge tag 'kvm-riscv-fixes-6.1-1' of https://github.com/kvm-riscv/linux into ↵Paolo Bonzini6-51/+57
HEAD KVM/riscv fixes for 6.1, take #1 - Fix compilation without RISCV_ISA_ZICBOM - Fix kvm_riscv_vcpu_timer_pending() for Sstc
2022-10-22Merge tag 'kvmarm-fixes-6.1-2' of ↵Paolo Bonzini2-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.1, take #2 - Fix a bug preventing restoring an ITS containing mappings for very large and very sparse device topology - Work around a relocation handling error when compiling the nVHE object with profile optimisation
2022-10-22Merge tag 'kvmarm-fixes-6.1-1' of ↵Paolo Bonzini7-33/+28
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.1, take #1 - Fix for stage-2 invalidation holding the VM MMU lock for too long by limiting the walk to the largest block mapping size - Enable stack protection and branch profiling for VHE - Two selftest fixes
2022-10-22Merge tag 'thermal-6.1-rc2' of ↵Linus Torvalds1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "This fixes the control CPU selection in the intel_powerclamp thermal driver" * tag 'thermal-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel_powerclamp: Use first online CPU as control_cpu
2022-10-22Merge tag 'pm-6.1-rc2' of ↵Linus Torvalds5-25/+20
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix some issues and clean up code in ARM cpufreq drivers. Specifics: - Fix module loading in the Tegra124 cpufreq driver (Jon Hunter) - Fix memory leak and update to read-only region in the qcom cpufreq driver (Fabien Parent) - Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent, Yang Yingliang)" * tag 'pm-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: sun50i: Switch to use dev_err_probe() helper cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper cpufreq: imx6q: Switch to use dev_err_probe() helper cpufreq: dt: Switch to use dev_err_probe() helper cpufreq: qcom: remove unused parameter in function definition cpufreq: qcom: fix writes in read-only memory region cpufreq: qcom: fix memory leak in error path cpufreq: tegra194: Fix module loading
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 16:10:02 +0300