summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-03-31nios2: Replace fdt_translate_address with of_flat_dt_translate_addressGuenter Roeck1-2/+1
nios2 builds fail with the following build error. arch/nios2/kernel/prom.c: In function 'early_init_dt_scan_serial': arch/nios2/kernel/prom.c:100:2: error: implicit declaration of function 'fdt_translate_address' Commit c90fe9c0394b ("of: earlycon: Move address translation to of_setup_earlycon()") replaced fdt_translate_address() with of_flat_dt_translate_address() but missed updating the nios2 code. Fixes: c90fe9c0394b ("of: earlycon: Move address translation to of_setup_earlycon()") Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Ley Foon Tan <lftan@altera.com>
2016-03-31bpf: make padding in bpf_tunnel_key explicitDaniel Borkmann2-1/+5
Make the 2 byte padding in struct bpf_tunnel_key between tunnel_ttl and tunnel_label members explicit. No issue has been observed, and gcc/llvm does padding for the old struct already, where tunnel_label was not yet present, so the current code works, but since it's part of uapi, make sure we don't introduce holes in structs. Therefore, add tunnel_ext that we can use generically in future (f.e. to flag OAM messages for backends, etc). Also add the offset to the compat tests to be sure should some compilers not padd the tail of the old version of bpf_tunnel_key. Fixes: 4018ab1875e0 ("bpf: support flow label for bpf_skb_{set, get}_tunnel_key") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31ipv6: udp: fix UDP_MIB_IGNOREDMULTI updatesEric Dumazet1-2/+2
IPv6 counters updates use a different macro than IPv4. Fixes: 36cbb2452cbaf ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Fix ethtool -a reporting.Michael Chan1-4/+2
To report flow control tx/rx settings accurately regardless of autoneg setting, we should use link_info->req_flow_ctrl. Before this patch, the reported settings were only correct when autoneg was on. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Fix typo in bnxt_hwrm_set_pause_common().Michael Chan1-1/+1
The typo caused the wrong flow control bit to be set. Reported by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Implement proper firmware message padding.Michael Chan2-1/+7
The size of every padded firmware message is specified in the first HWRM_VER_GET response message. Use this value to pad every message after that. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31bnxt_en: Initialize CP doorbell value before ring allocationPrashant Sreedharan1-1/+1
The existing code does the following: allocate completion ring initialize completion ring doorbell disable interrupts on this completion ring by writing to the doorbell We can have a race where firmware sends an asynchronous event to the host after completion ring allocation and before doorbell is initialized. When this happens driver can crash while ringing the doorbell using uninitialized value as part of handling the IRQ/napi request. Signed-off-by: Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31team: team should sync the port's uc/mc addrs when add a portXin Long1-0/+5
There is an issue when we use mavtap over team: When we replug nic links from team0, the real nics's mc list will not include the maddr for macvtap any more. then we can't receive pkts to macvtap device, as they are filterred by mc list of nic. In Bonding Driver, it syncs the uc/mc addrs in bond_enslave(). We will fix this issue on team by adding the port's uc/mc addrs sync in team_port_add. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30gro: Allow tunnel stacking in the case of FOU/GUEAlexander Duyck1-0/+16
This patch should fix the issues seen with a recent fix to prevent tunnel-in-tunnel frames from being generated with GRO. The fix itself is correct for now as long as we do not add any devices that support NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the potential to mess things up due to the fact that the outer transport header points to the outer UDP header and not the GRE header as would be expected. Fixes: fac8e0f579695 ("tunnels: Don't apply GRO to multiple layers of encapsulation.") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30qed: initialize return rc to avoid returning garbageColin Ian King1-1/+1
in the case where qed_slowpath_irq_req is not called, rc is not assigned and so qed_int_igu_enable will return a garbage value. Fix this by initializing rc to 0. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30sctp: really allow using GFP_KERNEL on sctp_packet_transmitMarcelo Ricardo Leitner1-3/+3
Somehow my patch for commit cea8768f333e ("sctp: allow sctp_transmit_packet and others to use gfp") missed two important chunks, which are now added. Fixes: cea8768f333e ("sctp: allow sctp_transmit_packet and others to use gfp") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-By: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30bridge: Allow set bridge ageing time when switchdev disabledHaishuang Yan1-1/+1
When NET_SWITCHDEV=n, switchdev_port_attr_set will return -EOPNOTSUPP, we should ignore this error code and continue to set the ageing time. Fixes: c62987bbd8a1 ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-30Merge branch 'linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug in pkcs7_validate_trust and its users where the output value may in fact be taken from uninitialised memory" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: PKCS#7: pkcs7_validate_trust(): initialize the _trusted output argument
2016-03-30Merge tag 'dlm-4.6-fixes' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm fix from David Teigland: "This fixes a bug from the configfs cleanup" * tag 'dlm-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: config: Fix ENOMEM failures in make_cluster()
2016-03-30Merge tag 'hwmon-for-linus-v4.6-rc2' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix crash due to NULL pointer access in max1111 driver" * tag 'hwmon-for-linus-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiated
2016-03-30gpio: xgene: Prevent NULL pointer dereferenceAxel Lin1-0/+5
platform_get_resource() can return NULL, thus add NULL test to prevent NULL pointer dereference. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30gpio: menz127: Drop lock field from struct men_z127_gpioAxel Lin1-5/+4
Current code uses a uninitialized spin lock. bgpio_init() already initialized a spin lock, so let's switch to use &gc->bgpio_lock instead and remove the lock from struct men_z127_gpio. Fixes: f436bc2726c6 "gpio: add driver for MEN 16Z127 GPIO controller" Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30ixgbe: Fix cls_u32 offload support for L4 portsSridhar Samudrala1-12/+4
Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix cls_u32 offload support for fields with masksSridhar Samudrala2-7/+5
Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: fix error handling in TC cls_u32 offload routinesSridhar Samudrala1-18/+34
Check for handle ids when adding/deleting hash nodes OR adding/deleting filter entries and limit them to max number of links or header nodes supported(IXGBE_MAX_LINK_HANDLE). Start from bit 0 when setting hash table bit-map.(adapter->tables) Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: make __ixgbe_setup_tc staticEmil Tantilov1-2/+2
This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1 Reported-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbevf: fix error code path when setting MAC addressEmil Tantilov2-5/+11
Return error when a MAC address change is rejected by the PF. This will prevent the user from modifying the MAC address when that operation is not permitted. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbevf: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-4/+6
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-4/+6
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Use udelay to avoid sleeping while atomicMark Rustad1-1/+1
Use udelay instead of usleep_range because this can be called while a lock is held. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix ATR so that it correctly handles IPv6 extension headersAlexander Duyck1-24/+21
The ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through. However this isn't the case as it is possible for a frame to arrive that is TCP but sent through something like a raw socket. As a result the driver was setting up bad filters in which tcp_hdr was really pointing to the network header so the data was all invalid. In order to correct this I have added a bit of parsing logic that will determine the TCP header location based off of the network header and either the offset in the case of the IPv4 header, or a walk through the IPv6 extension headers until it encounters the header that indicates IPPROTO_TCP. In addition I have added checks to verify that the lowest protocol provided is recognized as IPv4 or IPv6 to help mitigate raw sockets using ETH_P_ALL from having ATR applied to them. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Store VXLAN port number in network orderAlexander Duyck2-49/+20
The VXLAN port number should be stored in network order instead of in host order as it is accessed from the hot-path in ATR. This way we can avoid having to do any byte swaps in order to validate the port number. I moved the vxlan_port value into a hole in the read-mostly region of the adapter struct. This way it should be in a warm cache-line instead of in some isolated region in memory when it needs to be accessed. In addition I went through and stripped a bunch of unneeded ifdef flags since having an extra variable present doesn't really hurt anything and makes the code easier to read. I also went through and dropped the NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides no value as the flag is not evaluated in the Rx path. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30ixgbe: Fix for RAR0 not being set to default MAC addrTushar Dave1-0/+2
commit c9f53e63c208 ("ixgbe: Refactor MAC address configuration code") introduced code that doesn't set HW register RAR0 to default mac address but FF:FF:FF:FF:FF:FF. Due to this, ixgbe HW discards all incoming packets that doesn't have destination mac address equals to FF:FF:FF:FF:FF:FF. This commit sets RAR0 correctly to default HW mac address. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-30clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepllMatthew McClintock1-0/+10
Drivers for these don't exist yet so we will add them as fixed clocks so we don't BUG() if we change clocks that reference these clocks. Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: qcom: ipq4019: switch remaining defines to enumsMatthew McClintock1-35/+25
When this was added not all the remaining defines were switched over to use enums, so let's complete that process here Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: qcom: Make reset_control_ops constPhilipp Zabel2-2/+2
The qcom_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: tegra: Make reset_control_ops constPhilipp Zabel1-1/+1
The rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: sunxi: Make reset_control_ops constPhilipp Zabel3-3/+3
The sunxi_ve_reset_ops, sun9i_mmc_reset_ops, and sunxi_usb_reset_ops structures are never modified. Make them const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: atlas7: Make reset_control_ops constPhilipp Zabel1-1/+1
The atlas7_rst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: rockchip: Make reset_control_ops constPhilipp Zabel1-1/+1
The rockchip_softrst_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: mmp: Make reset_control_ops constPhilipp Zabel1-1/+1
The mmp_clk_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-30clk: mediatek: Make reset_control_ops constPhilipp Zabel1-1/+1
The mtk_reset_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-29arm64: defconfig: updates for 4.6Will Deacon1-8/+20
A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29dlm: config: Fix ENOMEM failures in make_cluster()Andrew Price1-2/+1
Commit 1ae1602de0 "configfs: switch ->default groups to a linked list" left the NULL gps pointer behind after removing the kcalloc() call which made it non-NULL. It also left the !gps check in place so make_cluster() now fails with ENOMEM. Remove the remaining uses of the gps variable to fix that. Reviewed-by: Bob Peterson <rpeterso@redhat.com> Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Andrew Price <anprice@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
2016-03-29arm64: perf: Move PMU register related defines to asm/perf_event.hShannon Zhao5-123/+66
To use the ARMv8 PMU related register defines from the KVM code, we move the relevant definitions to asm/perf_event.h header file and rename them with prefix ARMV8_PMU_. This allows us to get rid of kvm_perf_event.h. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29arm64: opcodes.h: Add arm big-endian config options before including arm headerJames Morse1-0/+4
arm and arm64 use different config options to specify big endian. This needs taking into account when including code/headers between the two architectures. A case in point is PAN, which uses the __instr_arm() macro to output instructions. The macro comes from opcodes.h, which lives under arch/arm. On a big-endian build the mismatched config options mean the instruction isn't byte swapped correctly, resulting in undefined instruction exceptions during boot: | alternatives: patching kernel code | kdevtmpfs[87]: undefined instruction: pc=ffffffc0004505b4 | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | kdevtmpfs[87]: undefined instruction: pc=ffffffc00076231c | Internal error: Oops - undefined instruction: 0 [#1] SMP | Modules linked in: | CPU: 0 PID: 87 Comm: kdevtmpfs Not tainted 4.1.16+ #5 | Hardware name: Hisilicon PhosphorHi1382 EVB (DT) | task: ffffffc336591700 ti: ffffffc3365a4000 task.ti: ffffffc3365a4000 | PC is at dump_instr+0x68/0x100 | LR is at do_undefinstr+0x1d4/0x2a4 | pc : [<ffffffc00076231c>] lr : [<ffffffc0000811d4>] pstate: 604001c5 | sp : ffffffc3365a6450 Cc: <stable@vger.kernel.org> #4.3.x- Reported-by: Hanjun Guo <guohanjun@huawei.com> Tested-by: Xuefeng Wang <wxf.wang@hisilicon.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29s390/crypto: provide correct file mode at device register.Harald Freudenberger1-0/+2
When the prng device driver calls misc_register() there is the possibility to also provide the recommented file permissions. This fix now gives useful values (0644) where previously just the default was used (resulting in 0600 for the device file). Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-29powerpc: Correct used_vsr commentSimon Guo1-1/+1
The used_vsr flag is set if process has used VSX registers, not Altivec registers. But the comment says otherwise, correct the comment. Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29powerpc/process: Fix altivec SPR not being savedOliver O'Halloran1-1/+1
In save_sprs() in process.c contains the following test: if (cpu_has_feature(cpu_has_feature(CPU_FTR_ALTIVEC))) t->vrsave = mfspr(SPRN_VRSAVE); CPU feature with the mask 0x1 is CPU_FTR_COHERENT_ICACHE so the test is equivilent to: if (cpu_has_feature(CPU_FTR_ALTIVEC) && cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) On CPUs without support for both (i.e G5) this results in vrsave not being saved between context switches. The vector register save/restore code doesn't use VRSAVE to determine which registers to save/restore, but the value of VRSAVE is used to determine if altivec is being used in several code paths. Fixes: 152d523e6307 ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") Cc: stable@vger.kernel.org Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29powerpc/mm: Fixup preempt underflow with huge pagesSebastian Siewior1-2/+2
hugepd_free() used __get_cpu_var() once. Nothing ensured that the code accessing the variable did not migrate from one CPU to another and soon this was noticed by Tiejun Chen in 94b09d755462 ("powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var"). So we had it fixed. Christoph Lameter was doing his __get_cpu_var() replaces and forgot PowerPC. Then he noticed this and sent his fixed up batch again which got applied as 69111bac42f5 ("powerpc: Replace __get_cpu_var uses"). The careful reader will noticed one little detail: get_cpu_var() got replaced with this_cpu_ptr(). So now we have a put_cpu_var() which does a preempt_enable() and nothing that does preempt_disable() so we underflow the preempt counter. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Christoph Lameter <cl@linux.com> Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-29x86, pmem: use memcpy_mcsafe() for memcpy_from_pmem()Dan Williams3-8/+27
Update the definition of memcpy_from_pmem() to return 0 or a negative error code. Implement x86/arch_memcpy_from_pmem() with memcpy_mcsafe(). Cc: Borislav Petkov <bp@alien8.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-03-29qmi_wwan: add "D-Link DWM-221 B1" device idBjørn Mork1-0/+1
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds2-1/+3
Pull IDE fixes from David Miller: "Just two small changes: 1) Remove bogus init annotation in icside, from Arnd Bergmann. 2) Don't use zero clock rates in palm_bk3710 driver, from Wolfram Sang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: palm_bk3710: test clock rate to avoid division by 0 ide: icside: remove incorrect initconst annotation
2016-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds23-68/+68
Pull sparc fixes from David Miller: "Minor typing cleanup from Joe Perches, and some comment typo fixes from Adam Buchbinder" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Convert naked unsigned uses to unsigned int sparc: Fix misspellings in comments.
2016-03-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds4-24/+24
Pull arch/tile bugfixes from Chris Metcalf: "These include updates to MAINTAINERS, some comment spelling fixes, and a bugfix to the tile kgdb.c support" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: Fix misspellings in comments. MAINTAINERS: update web link for tile architecture MAINTAINERS: update arch/tile maintainer email domain tile kgdb: fix bug in copy to gdb regs, and optimize memset
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:50:37 +0300