summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".Guillaume Nault1-4/+4
The ping command can run before DAD completes. In that case, ping may fail and break the selftest. We don't need DAD here since we're working on isolated device pairs. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10net/mlx5e: Fix macsec possible null dereference when updating MAC security ↵Emeel Hakim1-7/+2
entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: Fix macsec ssci attribute handling in offload pathEmeel Hakim1-3/+7
Currently when macsec offload is set with extended packet number (epn) enabled, the driver wrongly deduce the short secure channel identifier (ssci) from the salt instead of the stand alone ssci attribute as it should, consequently creating a mismatch between the kernel and driver's ssci values. Fix by using the ssci value from the relevant attribute. Fixes: 4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5: E-switch, Coverity: overlapping copyShay Drory1-4/+0
When a capability is set via port function caps callbacks, a memcpy() is performed in which the source and the target are the same address, e.g.: the copy is redundant. Hence, Remove it. Discovered by Coverity. Fixes: 7db98396ef45 ("net/mlx5: E-Switch, Implement devlink port function cmds to control RoCE") Fixes: e5b9642a33be ("net/mlx5: E-Switch, Implement devlink port function cmds to control migratable") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: Don't support encap rules with gbp optionGavin Li1-0/+2
Previously, encap rules with gbp option would be offloaded by mistake but driver does not support gbp option offload. To fix this issue, check if the encap rule has gbp option and don't offload the rule Fixes: d8f9dfae49ce ("net: sched: allow flower to match vxlan options") Signed-off-by: Gavin Li <gavinl@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5: Fix ptp max frequency adjustment rangeRahul Rameshbabu1-1/+1
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb that can be set for a single call of .adjfine. This means that a single call to .getfine cannot be greater than .max_adj or less than -(.max_adj). Provides correct value for max frequency adjustment value supported by devices. Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: Fix memory leak on updating vport countersAya Levin1-1/+2
When updating statistics driver queries the vport's counters. On fail, add error path releasing the allocated buffer avoiding memory leak. Fixes: 64b68e369649 ("net/mlx5: Refactor and expand rep vport stat group") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: TC, Restore pkt rate policing supportOz Shlomo1-6/+0
The offending commit removed the support for all packet rate metering. Restore the pkt rate metering support by removing the restriction. Fixes: 3603f26633e7 ("net/mlx5e: TC, allow meter jump control action") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: TC, ignore match level for post meter rulesOz Shlomo1-0/+1
The post meter table only matches on reg_c5. As such, the inner/outer match levels are irrelevant for the match critieria. The cited patch only sets the outer criteria to none, thus setting the inner match level for encapsulated packets. This caused rules with police action on tunnel devices to not find an existing flow group for the match criteria, thus failing to offload the rule. Set both the inner and outer match levels to none for post_meter rules. Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: IPoIB, Fix child PKEY interface stats on rx pathDragos Tatulea1-1/+1
The current code always does the accounting using the stats from the parent interface (linked in the rq). This doesn't work when there are child interfaces configured. Fix this behavior by always using the stats from the child interface priv. This will also work for parent only interfaces: the child (netdev) and parent netdev (rq->netdev) will point to the same thing. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parentDragos Tatulea1-0/+9
A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: IPoIB, Block queue count configuration when sub interfaces are ↵Dragos Tatulea4-7/+62
present PKEY sub interfaces share the receive queues with the parent interface. While setting the sub interface queue count is not supported, it is currently possible to change the number of queues of the parent interface. Thus we can end up with inconsistent queue sizes between the parent and its sub interfaces. This change disallows setting the queue count on the parent interface when sub interfaces are present. This is achieved by introducing an explicit reference to the parent netdev in the mlx5i_priv of the child interface. An additional counter is also required on the parent side to detect when sub interfaces are attached and for proper cleanup. The rtnl lock is taken during the ethtool op and the sub interface ndo_init/uninit ops. There is no race here around counting the sub interfaces, reading the sub interfaces and setting the number of channels. The ASSERT_RTNL was added to document that. Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: Verify dev is present for fix features ndoRoy Novich1-0/+3
The native NIC port net device instance is being used as Uplink representor. While changing profiles private resources are not available, fix features ndo does not check if the netdev is present. Add driver protection to verify private resources are ready. Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5: Fix command stats access after freeMoshe Shemesh2-12/+3
Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5e: TC, Keep mod hdr actions after mod hdr allocAriel Levkovich1-2/+3
When offloading TC NIC rule which has mod_hdr action, the mod_hdr actions list is freed upon mod_hdr allocation. In the new format of handling multi table actions and CT in particular, the mod_hdr actions list is still relevant when setting the pre and post rules and therefore, freeing the list may cause adding rules which don't set the FTE_ID. Therefore, the mod_hdr actions list needs to be kept for the pre/post flows as well and should be left for these handler to be freed. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5: check attr pointer validity before dereferencing itAriel Levkovich1-1/+1
Fix attr pointer validity checks after it was already dereferenced. Fixes: cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-01-10net/mlx5: DR, Fix 'stack frame size exceeds limit' error in dr_ruleYevgeny Kliteynik1-4/+7
If the kernel configuration asks the compiler to check frame limit of 1K, dr_rule_create_rule_nic exceed this limit: "stack frame size (1184) exceeds limit (1024)" Fixing this issue by checking configured frame limit and using the optimization STE array only for cases with the usual 2K (or larger) stack size warning. Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
2023-01-10Revert "r8169: disable detection of chip version 36"Heiner Kallweit1-4/+1
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59. This chip version seems to be very rare, but it exits in consumer devices, see linked report. Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install Fixes: 42666b2c452c ("r8169: disable detection of chip version 36") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10net/sched: act_mpls: Fix warning during failed attribute validationIdo Schimmel1-1/+7
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/ Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Reported-by: Wei Chen <harperchen1110@gmail.com> Tested-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10e1000e: Enable Link Partner Advertised SupportJamie Gloudon2-1/+18
This enables link partner advertised support to show link modes and pause frame use. Signed-off-by: Jamie Gloudon <jamie.gloudon@gmx.fr> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230103230653.1102544-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10gcc: disable -Warray-bounds for gcc-11 tooLinus Torvalds1-1/+5
We had already disabled this warning for gcc-12 due to bugs in the value range analysis, but it turns out we end up having some similar problems with gcc-11.3 too, so let's disable it there too. Older gcc versions end up being increasingly less relevant, and hopefully clang and newer version of gcc (ie gcc-13) end up working reliably enough that we still get the build coverage even when we disable this for some versions. Link: https://lore.kernel.org/all/20221227002941.GA2691687@roeck-us.net/ Link: https://lore.kernel.org/all/D8BDBF66-E44C-45D4-9758-BAAA4F0C1998@kernel.org/ Cc: Kees Cook <kees@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-01-10ice: Add check for kzallocJiasheng Jiang1-9/+14
Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code. Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-10ice: Fix potential memory leak in ice_gnss_tty_write()Yuan Can1-0/+1
The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed. Fixes: d6b98c8d242a ("ice: add write functionality for GNSS TTY") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-09tools/nolibc: fix the O_* fcntl/open macro definitions for riscvWilly Tarreau1-7/+7
When RISCV port was imported in 5.2, the O_* macros were taken with their octal value and written as-is in hex, resulting in the getdents64() to fail in nolibc-test. Fixes: 582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2 Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09tools/nolibc: prevent gcc from making memset() loop over itselfWilly Tarreau1-1/+4
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3, nolibc-test segfaults during the select() tests. It turns out that at this level, gcc recognizes an opportunity for using memset() to zero the fd_set, but it miscompiles it because it also recognizes a memset pattern as well, and decides to call memset() from the memset() code: 000122bc <memset>: 122bc: b510 push {r4, lr} 122be: 0004 movs r4, r0 122c0: 2a00 cmp r2, #0 122c2: d003 beq.n 122cc <memset+0x10> 122c4: 23ff movs r3, #255 ; 0xff 122c6: 4019 ands r1, r3 122c8: f7ff fff8 bl 122bc <memset> 122cc: 0020 movs r0, r4 122ce: bd10 pop {r4, pc} Simply placing an empty asm() statement inside the loop suffices to avoid this. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09tools/nolibc: fix missing includes causing build issues at -O0Willy Tarreau10-0/+29
After the nolibc includes were split to facilitate portability from standard libcs, programs that include only what they need may miss some symbols which are needed by libgcc. This is the case for raise() which is needed by the divide by zero code in some architectures for example. Regardless, being able to include only the apparently needed files is convenient. Instead of trying to move all exported definitions to a single file, since this can change over time, this patch takes another approach consisting in including the nolibc header at the end of all standard include files. This way their types and functions are already known at the moment of inclusion, and including any single one of them is sufficient to bring all the required ones. Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09tools/nolibc: restore mips branch ordering in the _start blockWilly Tarreau1-0/+2
Depending on the compiler used and the optimization options, the sbrk() test was crashing, both on real hardware (mips-24kc) and in qemu. One such example is kernel.org toolchain in version 11.3 optimizing at -Os. Inspecting the sys_brk() call shows the following code: 0040047c <sys_brk>: 40047c: 24020fcd li v0,4045 400480: 27bdffe0 addiu sp,sp,-32 400484: 0000000c syscall 400488: 27bd0020 addiu sp,sp,32 40048c: 10e00001 beqz a3,400494 <sys_brk+0x18> 400490: 00021023 negu v0,v0 400494: 03e00008 jr ra It is obviously wrong, the "negu" instruction is placed in beqz's delayed slot, and worse, there's no nop nor instruction after the return, so the next function's first instruction (addiu sip,sip,-32) will also be executed as part of the delayed slot that follows the return. This is caused by the ".set noreorder" directive in the _start block, that applies to the whole program. The compiler emits code without the delayed slots and relies on the compiler to swap instructions when this option is not set. Removing the option would require to change the startup code in a way that wouldn't make it look like the resulting code, which would not be easy to debug. Instead let's just save the default ordering before changing it, and restore it at the end of the _start block. Now the code is correct: 0040047c <sys_brk>: 40047c: 24020fcd li v0,4045 400480: 27bdffe0 addiu sp,sp,-32 400484: 0000000c syscall 400488: 10e00002 beqz a3,400494 <sys_brk+0x18> 40048c: 27bd0020 addiu sp,sp,32 400490: 00021023 negu v0,v0 400494: 03e00008 jr ra 400498: 00000000 nop Fixes: 66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0 Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09tools/nolibc: Fix S_ISxxx macrosWarner Losh1-7/+7
The mode field has the type encoded as an value in a field, not as a bit mask. Mask the mode with S_IFMT instead of each type to test. Otherwise, false positives are possible: eg S_ISDIR will return true for block devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is masked with S_IFDIR instead of S_IFMT. These macros now match the similar definitions in tools/include/uapi/linux/stat.h. Signed-off-by: Warner Losh <imp@bsdimp.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09nolibc: fix fd_set typeSven Schnelle1-23/+30
The kernel uses unsigned long for the fd_set bitmap, but nolibc use u32. This works fine on little endian machines, but fails on big endian. Convert to unsigned long to fix this. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2023-01-09objtool: Tolerate STT_NOTYPE symbols at end of sectionNicholas Piggin1-0/+9
Hand-written asm often contains non-function symbols in executable sections. _end symbols for finding the size of instruction blocks for runtime processing is one such usage. optprobe_template_end is one example that causes the warning: objtool: optprobe_template_end(): can't find starting instruction This is because the symbol happens to be at the end of the file (and therefore end of a section in the object file). So ignore end-of-section STT_NOTYPE symbols instead of bailing out because an instruction can't be found. While we're here, add a more descriptive warning for STT_FUNC symbols found at the end of a section. [ This also solves a PowerPC regression reported by Sathvika Vasireddy. ] Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reported-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Sathvika Vasireddy <sv@linux.ibm.com> Link: https://lore.kernel.org/r/20221220101323.3119939-1-npiggin@gmail.com
2023-01-09perf tests bpf prologue: Fix bpf-script-test-prologue test compile issue ↵Athira Rajeev1-0/+2
with clang While running 'perf test' for bpf, observed that "BPF prologue generation" test case fails to compile with clang. Logs below from powerpc: <stdin>:33:2: error: use of undeclared identifier 'fmode_t' fmode_t f_mode = (fmode_t)_f_mode; ^ <stdin>:37:6: error: use of undeclared identifier 'f_mode'; did you mean '_f_mode'? if (f_mode & FMODE_WRITE) ^~~~~~ _f_mode <stdin>:30:60: note: '_f_mode' declared here int bpf_func__null_lseek(void *ctx, int err, unsigned long _f_mode, ^ 2 errors generated. The test code tests/bpf-script-test-prologue.c uses fmode_t. And the error above is for "fmode_t" which is defined in include/linux/types.h as part of kernel build directory: "/lib/modules/<kernel_version>/build" that comes from kernel devel [ soft link to /usr/src/<kernel_version> ]. Clang picks this header file from "-working-directory" build option that specifies this build folder. But the commit 14e4b9f4289aed2c ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") changed the include directory to use: "/usr/include". Post this change, types.h from /usr/include/ is getting picked upwhich doesn’t contain definition of "fmode_t" and hence fails to compile. Compilation command before this commit: /usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/root/lib/perf/include/bpf -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o - Compilation command after this commit: /usr/bin/clang -D__KERNEL__ -D__NR_CPUS__=72 -DLINUX_VERSION_CODE=0x50e00 -xc -I/usr/include/ -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -Wno-unused-value -Wno-pointer-sign -working-directory /lib/modules/<ver>/build -c - -target bpf -g -O2 -o - The difference is addition of -I/usr/include/ in the first line which is causing the error. Fix this by adding typedef for "fmode_t" in the testcase to solve the compile issue. Fixes: 14e4b9f4289aed2c ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Disha Goel <disgoel@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/linux-perf-users/20230105120436.92051-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-01-09s390: fix -Wundef warning for CONFIG_KERNEL_ZSTDMasahiro Yamada1-2/+2
Since commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS for W=1 builds"), building with W=1 detects misuse of #(el)if. $ make W=1 ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- [snip] arch/s390/boot/decompressor.c:28:7: warning: "CONFIG_KERNEL_ZSTD" is not defined, evaluates to 0 [-Wundef] 28 | #elif CONFIG_KERNEL_ZSTD | ^~~~~~~~~~~~~~~~~~ This issue has been hidden because arch/s390/boot/Makefile overwrites KBUILD_CFLAGS, dropping -Wundef. CONFIG_KERNEL_ZSTD is a bool option. #elif defined() should be used. The line #ifdef CONFIG_KERNEL_BZIP2 is fine, but I changed it for consistency. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20230106161024.2373602-1-masahiroy@kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-01-09perf/x86/intel/uncore: Add Emerald RapidsKan Liang1-0/+1
From the perspective of the uncore PMU, the new Emerald Rapids is the same as the Sapphire Rapids. The only difference is the event list, which will be supported in the perf tool later. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230106160449.3566477-4-kan.liang@linux.intel.com
2023-01-09perf/x86/msr: Add Emerald RapidsKan Liang1-0/+1
The same as Sapphire Rapids, the SMI_COUNT MSR is also supported on Emerald Rapids. Add Emerald Rapids model. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20230106160449.3566477-3-kan.liang@linux.intel.com
2023-01-09perf/x86/msr: Add Meteor Lake supportKan Liang1-0/+2
Meteor Lake is Intel's successor to Raptor lake. PPERF and SMI_COUNT MSRs are also supported. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/20230104201349.1451191-7-kan.liang@linux.intel.com
2023-01-09perf/x86/cstate: Add Meteor Lake supportKan Liang1-9/+12
Meteor Lake is Intel's successor to Raptor lake. From the perspective of Intel cstate residency counters, there is nothing changed compared with Raptor lake. Share adl_cstates with Raptor lake. Update the comments for Meteor Lake. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/20230104201349.1451191-6-kan.liang@linux.intel.com
2023-01-09sched/core: Use kfree_rcu() in do_set_cpus_allowed()Waiman Long1-4/+29
Commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") may call kfree() if user_cpus_ptr was previously set. Unfortunately, some of the callers of do_set_cpus_allowed() may have pi_lock held when calling it. So the following splats may be printed especially when running with a PREEMPT_RT kernel: WARNING: possible circular locking dependency detected BUG: sleeping function called from invalid context To avoid these problems, kfree_rcu() is used instead. An internal cpumask_rcuhead union is created for the sole purpose of facilitating the use of kfree_rcu() to free the cpumask. Since user_cpus_ptr is not being used in non-SMP configs, the newly introduced alloc_user_cpus_ptr() helper will return NULL in this case and sched_setaffinity() is modified to handle this special case. Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221231041120.440785-3-longman@redhat.com
2023-01-09sched/core: Fix use-after-free bug in dup_user_cpus_ptr()Waiman Long1-5/+29
Since commit 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems"), the setting and clearing of user_cpus_ptr are done under pi_lock for arm64 architecture. However, dup_user_cpus_ptr() accesses user_cpus_ptr without any lock protection. Since sched_setaffinity() can be invoked from another process, the process being modified may be undergoing fork() at the same time. When racing with the clearing of user_cpus_ptr in __set_cpus_allowed_ptr_locked(), it can lead to user-after-free and possibly double-free in arm64 kernel. Commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") fixes this problem as user_cpus_ptr, once set, will never be cleared in a task's lifetime. However, this bug was re-introduced in commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") which allows the clearing of user_cpus_ptr in do_set_cpus_allowed(). This time, it will affect all arches. Fix this bug by always clearing the user_cpus_ptr of the newly cloned/forked task before the copying process starts and check the user_cpus_ptr state of the source task under pi_lock. Note to stable, this patch won't be applicable to stable releases. Just copy the new dup_user_cpus_ptr() function over. Fixes: 07ec77a1d4e8 ("sched: Allow task CPU affinity to be restricted on asymmetric systems") Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()") Reported-by: David Wang 王标 <wangbiao3@xiaomi.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221231041120.440785-2-longman@redhat.com
2023-01-09af_unix: selftest: Fix the size of the parameter to connect()Mirsad Goran Todorovac1-1/+1
Adjust size parameter in connect() to match the type of the parameter, to fix "No such file or directory" error in selftests/net/af_unix/ test_oob_unix.c:127. The existing code happens to work provided that the autogenerated pathname is shorter than sizeof (struct sockaddr), which is why it hasn't been noticed earlier. Visible from the trace excerpt: bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060 [pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory) BUG: The filename is trimmed to sizeof (struct sockaddr). Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Cc: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Westphal <fw@strlen.de> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09net: skb: remove old comments about frag_size for build_skb()Jakub Kicinski1-5/+3
Since commit ce098da1497c ("skbuff: Introduce slab_build_skb()") drivers trying to build skb around slab-backed buffers should go via slab_build_skb() rather than passing frag_size = 0 to the main build_skb(). Remove the copy'n'pasted comments about 0 meaning slab. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09net: lan966x: Allow to add rules in TCAM even if not enabledHoratiu Vultur1-3/+0
The blamed commit implemented the vcap_operations to allow to add an entry in the TCAM. One of the callbacks is to validate the supported keysets. If the TCAM lookup was not enabled, then this will return failure so no entries could be added. This doesn't make much sense, as you can enable at a later point the TCAM. Therefore change it such to allow entries in TCAM even it is not enabled. Fixes: 4426b78c626d ("net: lan966x: Add port keyset config and callback interface") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09Merge branch 'r8152-NCM-firmwares'David S. Miller2-146/+81
Bjørn Mork says: ==================== r8152: allow firmwares with NCM support Some device and firmware combinations with NCM support will end up using the cdc_ncm driver by default. This is sub- optimal for the same reasons we've previously accepted the blacklist hack in cdc_ether. The recent support for subclassing the generic USB device driver allows us to create a very slim driver with the same functionality. This patch set uses that to implement a device specific configuration default which is independent of any USB interface drivers. This means that it works equally whether the device initially ends up in NCM or ECM mode, without depending on any code in the respective class drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09cdc_ether: no need to blacklist any r8152 devicesBjørn Mork1-114/+0
The r8152 driver does not need this anymore. Dropping blacklist entries adds optional support for these devices in ECM mode. The 8153 devices are handled by the r8153_ecm driver when in ECM mode, and must still be blacklisted here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09r8152: add USB device driver for config selectionBjørn Mork1-32/+81
Subclassing the generic USB device driver to override the default configuration selection regardless of matching interface drivers. The r815x family devices expose a vendor specific function which the r8152 interface driver wants to handle. This is the preferred device mode. Additionally one or more USB class functions are usually supported for hosts lacking a vendor specific driver. The choice is USB configuration based, with one alternate function per configuration. Example device with both NCM and ECM alternate cfgs: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3 P: Vendor=0bda ProdID=8156 Rev=31.00 S: Manufacturer=Realtek S: Product=USB 10/100/1G/2.5G LAN S: SerialNumber=001000001 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152 E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver= E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver= I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver= E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms A problem with this is that Linux will prefer class functions over vendor specific functions. Using the above example, Linux defaults to cfg #2, running the device in a sub-optimal NCM mode. Previously we've attempted to work around the problem by blacklisting the devices in the ECM class driver "cdc_ether", and matching on the ECM class function in the vendor specific interface driver. The latter has been used to switch back to the vendor specific configuration when the driver is probed for a class function. This workaround has several issues; - class driver blacklists is additional maintanence cruft in an unrelated driver - class driver blacklists prevents users from optionally running the devices in class mode - each device needs double match entries in the vendor driver - the initial probing as a class function slows down device discovery Now these issues have become even worse with the introduction of firmware supporting both NCM and ECM, where NCM ends up as the default mode in Linux. To use the same workaround, we now have to blacklist the devices in to two different class drivers and add yet another match entry to the vendor specific driver. This patch implements an alternative workaround strategy - independent of the interface drivers. It avoids adding a blacklist to the cdc_ncm driver and will let us remove the existing blacklist from the cdc_ether driver. As an additional bonus, removing the blacklists allow users to select one of the other device modes if wanted. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09gro: take care of DODGY packetsEric Dumazet1-2/+3
Jaroslav reported a recent throughput regression with virtio_net caused by blamed commit. It is unclear if DODGY GSO packets coming from user space can be accepted by GRO engine in the future with minimal changes, and if there is any expected gain from it. In the meantime, make sure to detect and flush DODGY packets. Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()Minsuk Kang1-3/+41
Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09mlxsw: spectrum_router: Replace 0-length array with flexible arrayKees Cook1-1/+1
Zero-length arrays are deprecated[1]. Replace struct mlxsw_sp_nexthop_group_info's "nexthops" 0-length array with a flexible array. Detected with GCC 13, using -fstrict-flex-arrays=3: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_nexthop_group_hash_obj': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3278:38: warning: array subscript i is outside array bounds of 'struct mlxsw_sp_nexthop[0]' [-Warray-bounds=] 3278 | val ^= jhash(&nh->ifindex, sizeof(nh->ifindex), seed); | ^~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:2954:33: note: while referencing 'nexthops' 2954 | struct mlxsw_sp_nexthop nexthops[0]; | ^~~~~~~~ [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Cc: Ido Schimmel <idosch@nvidia.com> Cc: Petr Machata <petrm@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09Merge branch 'mptcp-next'David S. Miller9-32/+95
Mat Martineau says: ==================== mptcp: Protocol in-use tracking and code cleanup Here's a collection of commits from the MPTCP tree: Patches 1-4 and 6 contain miscellaneous code cleanup for more consistent use of helper functions, existing local variables, and better naming. Patches 5, 7, and 9 add sock_prot_inuse tracking for MPTCP and an associated self test. Patch 8 modifies the mptcp_connect self test tool to exit on SIGUSR1 when in "slow mode". ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09selftest: mptcp: add test for mptcp socket in useMenglong Dong1-5/+51
Add the function chk_msk_inuse() to diag.sh, which is used to check the statistics of mptcp socket in use. As mptcp socket in listen state will be closed randomly after 'accept', we need to get the count of listening mptcp socket through 'ss' command. All tests pass. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09selftest: mptcp: exit from copyfd_io_poll() when receive SIGUSR1Menglong Dong1-2/+2
For now, mptcp_connect won't exit after receiving the 'SIGUSR1' signal if '-r' is set. Fix this by skipping poll and sleep in copyfd_io_poll() if 'quit' is set. Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 01:52:58 +0300