summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-05-06ARM: dts: OMAP5: add pmu nodeNathan Lynch1-0/+6
Expose the PMU on OMAP5. Tested with perf on OMAP5 uEVM. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: n950: Add missing regulator definitionsSakari Ailus1-0/+14
The N950/N9 uses two additional regulators from the twl 4030 for CSI-2 receiver (vaux2) and cameras (vaux3). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: omap3-n900: Add sound supportSebastian Reichel1-0/+17
This patch adds support for the Nokia N900's sound system. Signed-off-by: Sebastian Reichel <sre@kernel.org> Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: twl4030: Add madcSebastian Reichel1-0/+6
Add madc node to twl4030, so that board DTS files can simply reference the A/D converter. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: omap3-n900: Add WL1251 supportSebastian Reichel1-0/+40
Add device tree support for the wireless chip built into the Nokia N900. Signed-off-by: Sebastian Reichel <sre@debian.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: am43x-epos-evm: Enable USBGeorge Cherian1-0/+18
Enable - USB PHY - USB for am43x-epos-evm Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: am437x-gp-evm: Enable USBGeorge Cherian1-0/+18
Enable - USB PHY - USB for am437x-gp-evm Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: AM4372: Add USB nodesGeorge Cherian1-0/+94
Add nodes for 2 instances each of - ocp2scp - USB PHY control module - USB PHY - dwc3_omap - USB for AM43xx. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: dts: am43xx clock dataGeorge Cherian1-0/+32
Add USB and USB PHY reference clock data Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: tabified] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06doc: Add "ti,am437x-dwc3" comaptible for dwc3 glueGeorge Cherian1-1/+3
Add the compatible "ti,am437x-dwc3" for dwc3 glue driver. Signed-off-by: George Cherian <george.cherian@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: tegra: add SD wp-gpios to Venice2 DTStephen Warren1-0/+1
Venice2 can detect write-protect on the SD card. Add the required DT entries to allow this. Signed-off-by: Stephen Warren <swarren@nvidia.com> [swarren: fixed GPIO polarity per Thierry's testing] Tested-by: Thierry Reding <treding@nvidia.com>
2014-05-06ARM: dts: Only build OMAP dtb if associated SoC is builtPeter Robinson1-32/+32
With ARCH_OMAP2PLUS being separated out into OMAP2/3/4/5 etc all the TI device tree blobs are built no matter the combination of SoCs that are enabled. This often causes a bunch of irrelevant .dts to be built on a multi platform kernel, this enables the building of just the ones relevant to the SoCs that are actually enabled. It also orders the dts file alphabetically. This also helps to avoid trivial merge conflicts when adding support for new boards. [tony@atomide.com: updated the order for am335x and am43x, moved am3517 to omap3] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06ARM: zynq: dt: Clean up device treeSoren Brinkmann1-14/+15
- Use generic node names - Fix up some weird formatting and white spaces - Update copyright info Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
2014-05-06ARM: socfpga: dts: Add div-reg to the main_pll clocksDinh Nguyen2-5/+5
The mpu_clk, main_clk, and dbg_base_clk outputs from the main PLL go through a pre-divider. Update socfpga.dtsi to represent those dividers for these clocks. Re-use the "div-reg" property that was used for the socfpga-gate-clock as this is the same thing. Also update the documentation. Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add reset-controllerSteffen Trumtrar2-1/+96
Add the necessary #reset-cells property to the rst-mgr node and provide a header-file with all possible resets specified. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06Documentation: dt: reset: move socfpga-resetSteffen Trumtrar1-0/+0
Instead of having the documentation for the socfpga-reset controller in a vendor specific directory, move it to the reset folder to all the other reset drivers. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06Documentation: dt: socfpga: add reset-cells propertySteffen Trumtrar1-0/+2
To be able to use the reset-controller framework, the property #reset-cells is mandatory. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: Add DTS entries for USBDinh Nguyen4-0/+40
Update all the SOCFPGA DTS files with USB entries. Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: Remove hard coded clock-frequency propertyDinh Nguyen3-48/+10
The timers and uart can get their clock frequencies using the common clock driver. Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add eeprom and rtc on i2c0Dinh Nguyen2-0/+30
The Altera Cyclone5 and Arria5 devkit has an EEPROM and a RTC on the board. This patch adds support for them. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> --- v2: Remove LCD as the driver has not been upstreamed.
2014-05-06ARM: socfpga: dts: convert to preprocessor includesSteffen Trumtrar8-8/+8
Convert all socfpga DT files to the dtc preprocessor include syntax. This allows to include header files in the devicetrees like other SoC-types already do. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add rtc on i2c0 to socratesSteffen Trumtrar1-0/+9
The SOCrates has an M41T82M RTC on i2c0. Add it. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add support for EBV SOCratesSteffen Trumtrar2-0/+42
The SOCrates is a SOCFpga-Cyclone5 based board from EBV. Add support for it. Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add can0+1Steffen Trumtrar1-0/+16
Add both can controllers to the dtsi. Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add i2c bussesSteffen Trumtrar1-0/+40
Add all 4 i2c busses. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: add remaining interrupts for pdmaSteffen Trumtrar1-1/+8
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06ARM: socfpga: dts: fix pdma interruptSteffen Trumtrar1-1/+1
The first interrupt is not at 180 but 104. Fix it. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
2014-05-06Merge tag 'renesas-dt2-for-v3.16' of ↵Olof Johansson2-0/+81
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Second Round of Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: * Add r8a7791 (R-Car M2) based Henninger board * tag 'renesas-dt2-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: henninger: enable SATA0 ARM: shmobile: henninger: add Ether DT support ARM: shmobile: henninger: initial device tree Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-06ARM: dts: sun7i: Add basic support for the Cubietruck WiFi moduleChen-Yu Tsai1-0/+31
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO. The IC also takes a power enable signal via GPIO. The WiFi module supports out-of-band interrupt signaling via GPIO, but this is not supported in this patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-06Merge tag 'renesas-dt-for-v3.16' of ↵Olof Johansson12-72/+402
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Renesas ARM Based SoC DT Updates for v3.16" from Simon Horman: r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCs * Add MSIOF nodes and aliases * Correct I2C clock parents r8a7791 (R-Car M2) SoC * Add EHCI MSTP clock r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards * Add MSIOF nodes * Add gpio-keys support for SW2 * Enable I2C * Enable Quad SPI transfers for the SPI FLASH * Rename and lable spi to qspi, add spi0 alias * Set ethernet PHY LED mode r8a7779 (R-Car H1) and r8a7778 (R-Car M2) SoCs * Improve and correct HSPI nodes r8a7778 (R-Car M2) based Bock-W board * Add SPI FLASH r8a7740 (R-Mobile A1) SoC * Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings r8a7740 (R-Mobile A1) based Armadillo800 EVA board * Enable RTC * Use KEY_* macros for gpio-keys EMEV2 (Emma Mobile EV2) based kzm9g board * Use KEY_* macros for gpio-keys * tag 'renesas-dt-for-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits) ARM: shmobile: armadillo-reference dts: Seiko Instruments, Inc is "sii" ARM: shmobile: lager dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: koelsch dts: Enable Quad SPI transfers for the SPI FLASH ARM: shmobile: r8a7790: add IIC(B) cores to dtsi ARM: shmobile: r8a7790: add IIC(B) clocks to dtsi ARM: shmobile: r8a7790: add IIC0-2 clock macros ARM: shmobile: r8a7791: Fix the I2C clocks parents in DT ARM: shmobile: r8a7790: Fix the I2C clocks parents in DT ARM: shmobile: lager: Correct setting of ethernet PHY LED mode ARM: shmobile: armadillo-reference dts: enable RTC ARM: shmobile: r8a7791: Add EHCI MSTP clock ARM: shmobile: Use r8a7740 suffix for i2c, mmcif, fsi2 compat strings ARM: shmobile: koelsch: activate i2c6 bus ARM: shmobile: koelsch: make i2c2-pfc node unique ARM: shmobile: r8a7791: add IIC(B) cores to dtsi ARM: shmobile: r8a7791: add IIC(B) clocks to dtsi ARM: shmobile: r8a7791: add IIC0/1 clock macros ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: armadillo-reference dts: Use KEY_* macros for gpio-keys ARM: shmobile: koelsch: Set ethernet PHY LED mode ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-06Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtOlof Johansson6-18/+405
Merge "at91: DT for 3.16 #1" from Nicolas Ferre: 3.16: first DT series: - more support for at91sam9rl and its associated EK board - some improvements to at91sam9g45 (ADC, TS, PWM leds) - addition of some missing pieces for describing audio of SAMA5D3-EK in DT * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: sama5d3: clock for ssc from rk pin ARM: at91: sama5d3: add the missing property ARM: at91: sama5d3: correct the sound compatible string ARM: at91: sama5d3: disable sound by default ARM: at91: sama5d3: add DMA property for SSC devices ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed ARM: at91/dt: at91sam9m10g45ek: add ADC and touchscreen support ARM: at91/dt: sam9g45: improve ADC/touchscreen support ARM: at91/dt: add peripherals to the at91sam9rlek board ARM: at91/dt: sam9rl: add lcd, adc, usb gadget and pwm support Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-05ARM: dts: sun7i: Enable mmc controller on various A20 boardsHans de Goede3-0/+43
The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun7i: Add pin-muxing info for the mmc controllersHans de Goede1-0/+21
This adds pin-muxing info for the mmc controller / port combinations which are known to be used on actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun7i: Add mmc controller nodesHans de Goede1-0/+36
Add nodes for the 4 mmc controllers found on A20 SoCs to arch/arm/boot/dts/sun7i-a20.dtsi. Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9Hans de Goede2-0/+49
Add a new sun6i-a31-m9 dts file for the Mele M9 / Mele A1000G Quad. These HTPCs use the same board in a different case, for more details see: http://linux-sunxi.org/Mele_M9 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun6i: Add mmc controller nodesHans de Goede1-0/+44
Add nodes for the 4 mmc controllers found on A31 SoCs to arch/arm/boot/dts/sun6i-a31.dtsi. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun6i: Add mmc clocksHans de Goede1-0/+32
Add clk-nodes for the mmc clocks. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boardsHans de Goede3-0/+64
The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun5i: Add mmc controller nodesDavid Lanzendörfer2-0/+45
Add nodes for the 3 mmc controllers found on A10s SoCs and for the 2 mmc controllers found on A13 SoCs. Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun4i: Enable mmc controller on various A10 boardsHans de Goede7-0/+63
Tested on a subset of these boards, for the others boards the settings match the ones of the tested boards according to the original firmware fex files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun4i: Add pin-muxing info for the mmc0 controllerHans de Goede1-0/+14
mmc0 is the only controller actually being used on boards, so limit the pin-muxing options to that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: dts: sun4i: Add mmc controller nodesDavid Lanzendörfer1-0/+36
Add nodes for the 4 mmc controllers found on A10 SoCs to arch/arm/boot/dts/sun4i-a10.dtsi. Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-05ARM: Kirkwood: t5325: Use simple card to instantiate audioAndrew Lunn1-0/+25
Add device tree nodes to instantiate the audio drivers on the HP T5325 device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-8-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: Kirkwood: DT: Add missing #sound-dai-cells propertyAndrew Lunn1-0/+1
The sound node is missing a #sound-dai-cells property. Add it, so that the sounds node can be used in combination with the simple-audio-card binding. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-5-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: Kirkwood: Add node for audio codecAndrew Lunn1-0/+3
Instantiate the audio codec via a DT node. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1399141819-23924-4-git-send-email-andrew@lunn.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05Linux 3.15-rc4v3.15-rc4Linus Torvalds1-1/+1
2014-05-05ARM: dts: kirkwood: set Guruplug phy-connection-type to rgmii-idSebastian Hesselbarth1-0/+2
Ethernet PHYs found on Globalscale Guruplug are connected by RGMII-ID. Set the corresponding phy-connection-type property accordingly. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-16-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: set Guruplug ethernet PHY compatibleSebastian Hesselbarth1-2/+6
Ethernet PHY compatible shall be "ethernet-phy-ieee802.3-c22" and "ethernet-phy-idAAAA.BBBB" if PHY OUI id is known. We know it for the PHY found on Guruplug, so set it accordingly. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-15-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282Sebastian Hesselbarth3-4/+6
Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi. Move the pinctrl setting to the I2C1 node directly and put a note in front of the corresponding pinctrl node to overwrite the setting on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-14-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-05ARM: dts: kirkwood: set default pinctrl for I2C0Sebastian Hesselbarth6-11/+3
There is only one valid pinctrl setting for I2C0 on Kirkwood. Now that we have the setting in the common SoC pinctrl, move it to the I2C0 controller node directly and remove it from the individual boards. While at it, also fix up status = "okay" to "ok" on one board's I2C0 node. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-13-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 03:58:45 +0300