summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-21bpf: enforce correct alignment for instructionsEric Dumazet1-1/+3
After commit 9facc336876f ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336876f ("bpf: reject any prog that failed read-only lock") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21net: mscc: fix the injection headerAntoine Tenart1-5/+5
When injecting frames in the Ocelot switch driver an injection header (IFH) should be used to configure various parameters related to a given frame, such as the port onto which the frame should be departed or its vlan id. Other parameters in the switch configuration can led to an injected frame being sent without an IFH but this led to various issues as the per-frame parameters are then not used. This is especially true when using multiple ports for injection. The IFH was injected with the wrong endianness which led to the switch not taking it into account as the IFH_INJ_BYPASS bit was then unset. (The bit tells the switch to use the IFH over its internal configuration). This patch fixes it. In addition to the endianness fix, the IFH is also fixed. As it was (unwillingly) unused, some of its fields were not configured the right way. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21net: davinci_emac: match the mdio device against its compatible if possibleBartosz Golaszewski1-0/+4
Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag.Doron Roberts-Kedes2-8/+37
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-21r8169: Fix netpoll oopsVille Syrjälä1-1/+1
Pass the correct thing to rtl8169_interrupt() from netpoll. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: netdev@vger.kernel.org Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: ebcd5daa7ffd ("r8169: change interrupt handler argument type") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21strparser: Don't schedule in workqueue in paused stateVakul Garg1-4/+1
In function strp_data_ready(), it is useless to call queue_work if the state of strparser is already paused. The state checking should be done before calling queue_work. The change reduces the context switches and improves the ktls-rx throughput by approx 20% (measured on cortex-a53 based platform). Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Acked-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21selftests: net: add config fragmentsAnders Roxell1-0/+2
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21bpfilter: fix user mode helper cross compilationMatteo Croce1-1/+1
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd4983 ("bpfilter: fix build error") Signed-off-by: Matteo Croce <mcroce@redhat.com> Reported-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21Merge branch 'drm-fixes-4.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-27/+65
into drm-fixes Bunch of amdgpu fixes mostly all going to stable. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180620190021.2775-1-alexander.deucher@amd.com
2018-06-21Merge branch 'turbostat' of ↵Rafael J. Wysocki2-75/+167
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat utility changes for 4.18-rc2 from Len Brown. "This includes two regression fixes, plus a couple more random, but worthy, patches." * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: version 18.06.20 tools/power turbostat: add the missing command line switches tools/power turbostat: add single character tokens to help tools/power turbostat: alphabetize the help output tools/power turbostat: fix segfault on 'no node' machines tools/power turbostat: add optional APIC X2APIC columns tools/power turbostat: decode cpuid.1.HT tools/power turbostat: fix show/hide issues resulting from mis-merge
2018-06-21Documentation: intel_pstate: Fix typoRafael J. Wysocki1-1/+1
Fix a typo in the intel_pstate admin-guide documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds7-33/+59
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
2018-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds53-195/+371
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ...
2018-06-21drm/i915: Update DRIVER_DATE to 20180620Rodrigo Vivi1-2/+2
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-06-20drm/i915/icl: Add 10-bit support for hdmiRadhakrishna Sripada1-16/+48
Starting Icelake silicon supports 10-bpc hdmi to support certain media workloads. Currently hdmi supports 8 and 12 bpc. Plumbed in support for 10 bit hdmi. Cc: James Ausmus <james.ausmus@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-18-paulo.r.zanoni@intel.com
2018-06-20drm/i915/psr: fix copy-paste error with setting of tp2_wakeup_time_usColin Ian King1-1/+1
Currently for the psr_table->tp2_tp3_wakeup_time case 3 there appears to be a copy-paste error from the previous switch statement where dev_priv->vbt.psr.tp1_wakeup_time_us is being assigned and I believe it should be dev_priv->vbt.psr.tp2_tp3_wakeup_time_us that should be assigned instead. Detected by CoverityScan, CID#1470105 ("Copy-paste error") Fixes: 77312ae8f071 ("drm/i915/psr: vbt change for psr") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180620132543.28092-1-colin.king@canonical.com
2018-06-20block: sed-opal: Fix a couple off by one bugsDan Carpenter1-2/+2
resp->num is the number of tokens in resp->tok[]. It gets set in response_parse(). So if n == resp->num then we're reading beyond the end of the data. Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Reviewed-by: Scott Bauer <scott.bauer@intel.com> Tested-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20tools/power turbostat: version 18.06.20Len Brown1-1/+1
Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add the missing command line switchesNathan Ciobanu1-0/+14
Document the missing command line tokens in the help() function. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add single character tokens to helpNathan Ciobanu1-11/+14
Improve the help() output by adding the single character tokens (e.g -a). Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: alphabetize the help outputNathan Ciobanu1-2/+2
Sort the command line arguments output of help() in alphabetical order in line with other linux tools. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: fix segfault on 'no node' machinesNathan Ciobanu1-0/+13
Running turbostat on machines that don't expose nodes in sysfs (no /sys/bus/node) causes a segfault or a -nan value diesplayed in the log. This is caused by physical_node_id being reported as -1 and logical_node_id being calculated as a negative number resulting in the new GET_THREAD/GET_CORE returning an incorrect address. Signed-off-by: Nathan Ciobanu <nathan.d.ciobanu@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: add optional APIC X2APIC columnsLen Brown2-9/+68
Add APIC and X2APIC columns to the topology section. They are disabled-by-default -- enable like so: --debug or --enable APIC,X2APIC Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: decode cpuid.1.HTLen Brown1-1/+2
eg. the "HT" here: CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM HT TM Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20tools/power turbostat: fix show/hide issues resulting from mis-mergeLen Brown1-52/+54
The --show and --hide options failed on "Node", which was listed as "Node%". The --show and --hide options were generally fouled-up do due to come content merges that scrambled the list of column name indexes. Signed-off-by: Len Brown <len.brown@intel.com>
2018-06-20drm/i915/psr: Fix warning in intel_psr_activate()Dhinakaran Pandiyan1-0/+1
commit 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.") removed the call to cancel a scheduled psr_work from psr_disable() and instead added an early return in the work function. But, if the scheduled work item is executed after psr_enable(), we end up printing warnings as PSR is already enabled and active. So, put the cancel_work call back in psr_disable(). Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 5422b37c907e ("drm/i915/psr: Kill delays when activating psr back.") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106948 Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180618220207.2778-1-dhinakaran.pandiyan@intel.com
2018-06-20blk-mq-debugfs: Off by one in blk_mq_rq_state_name()Dan Carpenter1-1/+1
If rq_state == ARRAY_SIZE() then we read one element beyond the end of the blk_mq_rq_state_name_array[] array. Fixes: ec6dcf63c55c ("blk-mq-debugfs: Show more request state information") Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20drm/i915/selftests: Remove unused dmabuf->kmap routines, fix the buildChris Wilson1-12/+0
Fix i915's CI build after the removal of the dmabuf->kmap interface that left the mock routines intact. In file included from drivers/gpu/drm/i915/i915_gem_dmabuf.c:335:0: drivers/gpu/drm/i915/selftests/mock_dmabuf.c:104:13: error: ‘mock_dmabuf_kunmap_atomic’ defined but not used [-Werror=unused-function] static void mock_dmabuf_kunmap_atomic(struct dma_buf *dma_buf, unsigned long page_num, void *addr) drivers/gpu/drm/i915/selftests/mock_dmabuf.c:97:14: error: ‘mock_dmabuf_kmap_atomic’ defined but not used [-Werror=unused-function] static void *mock_dmabuf_kmap_atomic(struct dma_buf *dma_buf, unsigned long page_num) Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180620162152.1158-1-chris@chris-wilson.co.uk Reviewed-by: Christian König <christian.koenig@amd.com>
2018-06-20Merge drm-upstream/drm-next into drm-misc-nextGustavo Padovan1448-24139/+57660
We got a few conflicts in drm_atomic.c after merging the DRM writeback support, now we need a backmerge to unlock develop development on drm-misc-next. Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
2018-06-20drm: writeback: Add client capability for exposing writeback connectorsLiviu Dudau4-0/+28
Due to the fact that writeback connectors behave in a special way in DRM (they always report being disconnected) we might confuse some userspace. Add a client capability for writeback connectors that will filter them out for clients that don't understand the capability. Changelog: - only accept the capability if the client has already set the DRM_CLIENT_CAP_ATOMIC one. Cc: Sean Paul <seanpaul@chromium.org> Cc: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/229038/
2018-06-20drm: writeback: Add out-fences for writeback connectorsBrian Starkey6-16/+257
Add the WRITEBACK_OUT_FENCE_PTR property to writeback connectors, to enable userspace to get a fence which will signal once the writeback is complete. It is not allowed to request an out-fence without a framebuffer attached to the connector. A timeline is added to drm_writeback_connector for use by the writeback out-fences. In the case of a commit failure or DRM_MODE_ATOMIC_TEST_ONLY, the fence is set to -1. Changes from v2: - Rebase onto Gustavo Padovan's v9 explicit sync series - Change out_fence_ptr type to s32 __user * - Set *out_fence_ptr to -1 in drm_atomic_connector_set_property - Store fence in drm_writeback_job Gustavo Padovan: - Move out_fence_ptr out of connector_state - Signal fence from drm_writeback_signal_completion instead of in driver directly Changes from v3: - Rebase onto commit 7e9081c5aac7 ("drm/fence: fix memory overwrite when setting out_fence fd") (change out_fence_ptr to s32 __user *, for real this time.) - Update documentation around WRITEBACK_OUT_FENCE_PTR Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/229036/
2018-06-20drm: Add writeback connector typeBrian Starkey12-2/+541
Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a WRITEBACK_PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Changes since v3: - Rebased - Rename PIXEL_FORMATS -> WRITEBACK_PIXEL_FORMATS Chances since v4: - Embed a drm_encoder inside the drm_writeback_connector to reduce the amount of boilerplate code required from the drivers that are using it. Changes since v5: - Added Rob Clark's atomic_commit() vfunc to connector helper funcs, so that writeback jobs are committed from atomic helpers - Updated create_writeback_properties() signature to return an error code rather than a boolean false for failure. - Free writeback job with the connector state rather than when doing the cleanup_work() Changes since v7: - fix extraneous use of out_fence that is only introduced in a subsequent patch. Changes since v8: - whitespace changes pull from subsequent patch Changes since v9: - Revert the v6 changes that free the writeback job in the connector state cleanup and return to doing it in the cleanup_work() function Signed-off-by: Brian Starkey <brian.starkey@arm.com> [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [rebased and added atomic_commit() vfunc for writeback jobs] Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/229037/
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König17-165/+2
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20dma_buf: remove device parameter from attach callback v2Christian König10-18/+13
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
2018-06-20drm/vc4: Always obey implicit syncDaniel Vetter1-4/+7
Same justification as for drm_gem_fb_prepare_fb. Cc: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-9-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
2018-06-20drm/gem-fb-helper: Always do implicit syncDaniel Vetter1-1/+1
I've done a lot of history digging. The first signs of this optimization was introduced in i915: commit 25067bfc060d1a481584dcb51ef4b5680176ecb6 Author: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Date: Wed Sep 10 12:03:17 2014 -0300 drm/i915: pin sprite fb only if it changed without much justification. Pinning already pinned stuff is real cheap (it's just obj->pin_count++ really), and the missing implicit sync was entirely forgotten about it seems. It's at least not mentioned anywhere it the commit message. It was also promptly removed shortly afterwards in commit ea2c67bb4affa84080c616920f3899f123786e56 Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) again without really mentioning the side-effect that plane updates with the same fb now again obey implicit syncing. Note that this only ever applied to the plane_update hook, all other legacy entry points (set_base, page_flip) always obeyed implicit sync in the drm/i915 driver. The real source of this code here seems to be msm, copied to vc4, then copied to tinydrm. I've also tried to dig around in all available msm sources, but the corresponding check for fb != old_fb is present ever since the initial merge in commit cf3a7e4ce08e6876cdcb80390876647f28a7cf8f Author: Rob Clark <robdclark@gmail.com> Date: Sat Nov 8 13:21:06 2014 -0500 drm/msm: atomic core bits The only older version I've found of msm atomic code predates the atomic helpers, and so didn't even use any of this. It also does not have a corresponding check (because it simply did no implicit sync at all). I've chatted with Rob on irc, and he didn't remember the reason for this either. Note we had epic amounts of fun with too much syncing against _vblank_, especially around cursor updates. But I don't ever discussing a need for less syncing against implicit fences. Also note that explicit fencing allows you to sidetrack all of this, at least for all the drivers correctly implemented using drm_atomic_set_fence_for_plane(). Given that it seems to be an accident of history, and that big drivers like i915 (and also nouveau it seems, I didn't follow the amdgpu/radeon sync code to figure this out properly there) never have done it, let's remove this. Cc: Rob Clark <robdclark@gmail.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: "Noralf Trønnes" <noralf@tronnes.org> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-8-daniel.vetter@ffwll.ch
2018-06-20nvmet: reset keep alive timer in controller enableMax Gurtuvoy1-0/+8
Controllers that are not yet enabled should not really enforce keep alive timeouts, but we still want to track a timeout and cleanup in case a host died before it enabled the controller. Hence, simply reset the keep alive timer when the controller is enabled. Suggested-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20nvme-rdma: don't override opts->queue_sizeSagi Grimberg1-11/+10
That is user argument, and theoretically controller limits can change over time (over reconnects/resets). Instead, use the sqsize controller attribute to check queue depth boundaries and use it to the tagset allocation. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20nvme-rdma: Fix command completion race at error recoveryIsrael Rukshin1-2/+6
The race is between completing the request at error recovery work and rdma completions. If we cancel the request before getting the good rdma completion we get a NULL deref of the request MR at nvme_rdma_process_nvme_rsp(). When Canceling the request we return its mr to the mr pool (set mr to NULL) and also unmap its data. Canceling the requests while the rdma queues are active is not safe. Because rdma queues are active and we get good rdma completions that can use the mr pointer which may be NULL. Completing the request too soon may lead also to performing DMA to/from user buffers which might have been already unmapped. The commit fixes the race by draining the QP before starting the abort commands mechanism. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20nvme-rdma: fix possible free of a non-allocated async event bufferSagi Grimberg1-13/+11
If nvme_rdma_configure_admin_queue fails before we allocated the async event buffer, we will falsly free it because nvme_rdma_free_queue is freeing it. Fix it by allocating the buffer right after nvme_rdma_alloc_queue and free it right before nvme_rdma_queue_free to maintain orderly reverse cleanup sequence. Reported-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20nvme-rdma: fix possible double free condition when failing to create a ↵Sagi Grimberg1-10/+10
controller Failures after nvme_init_ctrl will defer resource cleanups to .free_ctrl when the reference is released, hence we should not free the controller queues for these failures. Fix that by moving controller queues allocation before controller initialization and correctly freeing them for failures before initialization and skip them for failures after initialization. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-06-20drm/i915/selftests: Avoid ERR_PTR dereferenceChris Wilson1-2/+2
Along the early error path for igt_switch_to_kernel_context we may try to dereference an invalid error pointer. Instead, return early rather than dump the GEM trace since we haven't yet emitted anything of interest. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 09a4c02e58c1 ("drm/i915: Look for an active kernel context before switching") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180620112441.13085-1-chris@chris-wilson.co.uk
2018-06-20x86: Call fixup_exception() before notify_die() in math_error()Siarhei Liakh1-6/+8
fpu__drop() has an explicit fwait which under some conditions can trigger a fixable FPU exception while in kernel. Thus, we should attempt to fixup the exception first, and only call notify_die() if the fixup failed just like in do_general_protection(). The original call sequence incorrectly triggers KDB entry on debug kernels under particular FPU-intensive workloads. Andy noted, that this makes the whole conditional irq enable thing even more inconsistent, but fixing that it outside the scope of this. Signed-off-by: Siarhei Liakh <siarhei.liakh@concurrent-rt.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Borislav Petkov" <bpetkov@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/DM5PR11MB201156F1CAB2592B07C79A03B17D0@DM5PR11MB2011.namprd11.prod.outlook.com
2018-06-20locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMSWaiman Long1-0/+1
It was found that the use of up_read_non_owner() in NFS was causing the following warning when DEBUG_RWSEMS was configured. DEBUG_LOCKS_WARN_ON(sem->owner != ((struct task_struct *)(1UL << 0))) Looking into the rwsem.c file, it was discovered that the corresponding down_read_non_owner() function was not setting the owner field properly. This is fixed now, and the warning should be gone. Fixes: 5149cbac4235 ("locking/rwsem: Add DEBUG_RWSEMS to look for lock/unlock mismatches") Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Gavin Schenk <g.schenk@eckelmann.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-nfs@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1527168398-4291-1-git-send-email-longman@redhat.com
2018-06-20udf: Drop unused arguments of udf_delete_aext()Jan Kara3-9/+7
udf_delete_aext() uses its last two arguments only as local variables. Drop them. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Provide function for calculating dir entry lengthJan Kara3-15/+10
Provide function for calculating directory entry length and use to reduce code duplication. Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20udf: Detect incorrect directory sizeJan Kara1-0/+3
Detect when a directory entry is (possibly partially) beyond directory size and return EIO in that case since it means the filesystem is corrupted. Otherwise directory operations can further corrupt the directory and possibly also oops the kernel. CC: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> CC: stable@vger.kernel.org Reported-and-tested-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20ext2: add warning when specifying nocheck optionChengguang Xu2-5/+3
The option nocheck(nocheck/check=none) is useless but considering backwards compatibility it's better to print warning for a while before completely remove from the code. This patch add proper warning message for option 'nocheck' and remove unnecessary comment/function declaration which is used for removed option 'check'. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20quota: Cleanup list iteration in dqcache_shrink_scan()Jan Kara1-5/+2
Use list_first_entry() and list_empty() instead of opencoded variants. Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Jan Kara <jack@suse.cz>
2018-06-20quota: reclaim least recently used dquotsGreg Thelen1-2/+2
The dquots in the free_dquots list are not reclaimed in LRU way. put_dquot_last() puts entries to the tail and dqcache_shrink_scan() frees from the tail. Free unreferenced dquots in LRU order because it seems more reasonable than freeing most recently used. Signed-off-by: Greg Thelen <gthelen@google.com> Signed-off-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: Jan Kara <jack@suse.cz>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 06:32:07 +0300