summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-02-06tdfxfb: fix section mismatch warningsRandy Dunlap1-1/+1
tdfxfb_setup() can be __init. This fixes the modpost section mismatch warnings: WARNING: vmlinux.o(.text+0x4cff9b): Section mismatch: reference to .init.data:mode_option (between 'tdfxfb_setup' and 'getclkMHz') WARNING: vmlinux.o(.text+0x4cffa8): Section mismatch: reference to .init.data: (between 'tdfxfb_setup' and 'getclkMHz') [krzysztof.h1@poczta.fm: use __init, not __devinit] Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fb: nvidiafb: Try harder at initial mode setting.Paul Mundt1-2/+20
The current nvidiafb_check_var() simply bails out if the selected mode is out of range of the panel dimensions. A good question would be why the bogus mode is being selected in the first place -- the panel dimensions that are read back are certainly bogus, but alas, I have no idea where to even begin looking at the i2c/EDID/DDC mess: nvidiafb: Device ID: 10de0165 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog not found nvidiafb: EDID found from BUS1 nvidiafb: CRTC 0 is currently programmed for DFP nvidiafb: Using DFP on CRTC 0 nvidiafb: Panel size is 1280 x 1024 nvidiafb: Panel is TMDS nvidiafb: unable to setup MTRR nvidiafb: Flat panel dithering disabled nvidiafb: PCI nVidia NV16 framebuffer (64MB @ 0xC0000000) In my .config I presently have: CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y CONFIG_FB_NVIDIA_I2C=y I've not tried fiddling with these options, as I haven't the vaguest idea what I should be looking at. As a workaround, simply groveling for a new mode based on the probed dimensions seems to work ok. While it would be nice to debug this further and sort out why the panel information is bogus, I think it's still worth retrying the mode based on the panel information at hand as a last-ditch effort, rather than simply bailing out completely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Antonino A. Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06vermilion.c: use ALIGN(), not __ALIGN_MASK()Andrew Morton1-3/+2
__ALIGN_MASK() is an internal implementation detail of ALIGN(). Let's not needlessly fatten the interface in this driver. [fujita.tomonori@lab.ntt.co.jp: fix it] Cc: Alan Hourihane <alanh@fairlite.demon.co.uk> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06neofb: avoid overwriting fb_info fieldsAndrew Morton1-9/+18
Fix bug identified by Marcio Buss in http://bugzilla.kernel.org/show_bug.cgi?id=9565 - neofb can overwrite a field in the fb_info struct. This fix will result in truncated device identification strings - perhaps fb_innfo.fix.id can be made larger? Cc: Marcio Buss <marciobuss@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Christian Trefzer <ctrefzer@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video/pm3fb.c section fixAdrian Bunk1-1/+1
WARNING: vmlinux.o(.text+0x46e456): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e45c): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e49b): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4a0): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4bc): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e4c2): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c1): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') WARNING: vmlinux.o(.text+0x46e5c7): Section mismatch: reference to .init.data: (between 'pm3fb_size_memory' and 'update_crtc2') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbcon: fix sparse warning about shadowing 'rotate' symbolMarcin Slusarz1-6/+6
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbcon: fix sparse warning about shadowing 'p' symbolMarcin Slusarz1-5/+5
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06vgacon: fix sparse warning about shadowing 'i' symbolMarcin Slusarz1-2/+0
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06atmel_lcdfb: validate display timingsHaavard Skinnemoen2-7/+27
Setting a display timing parameter too high or too low may cause it to wrap around and thus become completely wrong. Validate the timings in atmel_lcdfb_check_var() and saturate to the highest or lowest possible value if necessary. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fb: defio nopageNick Piggin2-12/+11
Convert fb defio from nopage to fault. Switch from OOM to SIGBUS if the resource is not available. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbmon: cleanup trailing whitespacesAndre Haupt1-58/+58
[akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fbmon: remove unnecessary local variableAndre Haupt1-1/+1
This fixes a sparse warning about symbol 'i' shadowing an earlier one. Signed-off-by: Andre Haupt <andre@bitwigglers.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06drivers/video: remove unnecessary pci_dev_putJulia Lawall1-1/+1
pci_get_class implicitly does a pci_dev_put on its second argument, so pci_dev_put is only needed if there is a break out of the loop. The semantic match detecting this problem is as follows: // <smpl> @@ expression dev; expression E; @@ * pci_dev_put(dev) ... when != dev = E ( * pci_get_device(...,dev) | * pci_get_device_reverse(...,dev) | * pci_get_subsys(...,dev) | * pci_get_class(...,dev) ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06video/hpfb.c section fixAdrian Bunk1-1/+2
WARNING: vmlinux.o(.text+0xb851a): Section mismatch: reference to .init.text:hpfb_init_one (between 'hpfb_dio_probe' and 'read_null') hpfb_init_one() must be __devinit since it's called by the __devinit hpfb_dio_probe(). Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06make video/geode/lxfb_core.c:geode_modedb[] staticAdrian Bunk1-1/+1
geode_modedb[] can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06gpio: handle pca953{4,5,6,7,8} tooGuennadi Liakhovetski1-17/+54
This third part of an extension to support more pca953x chips updates the logic to handle the smaller register widths used by the 4-bit and 8-bit parts, and to use the chip type to determine how many GPIOs it provides. As long as we don't support interrupt and reset capabilities, those size issues are the only software-visible differences between these parts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06gpio: rename pca953x symbolsGuennadi Liakhovetski4-62/+63
This second part of an extension to support more pca953x chips renames the C and Kconfig symbols. All affected files were updated by sed, except for a couple of obvious exceptions. It also updates the Kconfig helptext. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06gpio: rename pca9539 driverGuennadi Liakhovetski3-2/+2
First part of an extension to let the pca9539 driver support more chips, starting with pca9534, pca9535, pca9536, pca9537, and pca9538. This renames the files and modifies the Makefile. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06w1-gpio: add GPIO w1 bus master driverVille Syrjala6-0/+193
Add a GPIO 1-wire bus master driver. The driver used the GPIO API to control the wire and the GPIO pin can be specified using platform data similar to i2c-gpio. The driver was tested with AT91SAM9260 + DS2401. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: at91sam9 RTC support (RTT and/or RTC)David Brownell3-4/+562
AT91sam9 RTC support, primarily in the form of an RTT-as-RTC driver that was extracted from 2.6.23-at91 patch and updated: - Relies on now-merged platform updates, which associate the RTT hardware address with each RTT and use the "at91_rtt" name. - RTC framework related fixes and cleanups, notably: * removed now-needless suspend/resume clock offset logic * alarm read/write now respects the "enabled" flag * suspend always disables update irqs * shutdown (and startup) disables all irqs - Misc cleanup: * use dev_*() messaging * add comments * remove globals, * ... etc - Don't force use of RTT0 and GPBR0. Either resource may need to be used for other purposes (like NO_HZ support). - Update "AT91RM9200 RTC" Kconfig to allow it on SAM9RL chips (it has both RTT and RTC). Driver binding uses bus_find_device() to avoid needing any kind of "timer library" code when there's more than one RTT module. (This timer can be used as an RTC, to support NO_HZ operation, or potentially for other stuff. The choice is a per-system policy.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Michel Benoit <murpme@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: remove more dev->power.power_state usageDavid Brownell1-12/+4
Remove some more references to dev->power.power_state. That field is overdue for removal, but we can't do that while it's still referenced in the kernel. The only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: cleanup example codeMike Frysinger1-19/+19
No functional changes here, just tighten up style/whitespace. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: update documentation wrt irq_set_freqMike Frysinger1-2/+2
Document the proper use of the irq_set_freq function. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc ds1307: ds_1340 change initfrederic Rodo1-7/+20
For DS140, clear the oscillator fault flag as needed. Signed-off-by: Frederic RODO <f.rodo@til-technologies.fr> [ And remove some "sparse" warnings. ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: add support for Epson RTC-9701JE V4Magnus Damm1-27/+10
Add support for the Epson RTC-9701JE SPI RTC device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: add support for Epson RTC-9701JE V2Magnus Damm3-0/+205
Add support for the Epson RTC-9701JE SPI RTC device. Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ip27-rtc: convert ioctl to unlocked_ioctlCyrill Gorcunov1-5/+4
Convert ioctl call to unlocked_ioctl form. It is possible (in that simple way) due to a spinlock protection. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: add HPET RTC emulation to RTC_DRV_CMOSBernhard Walle2-14/+70
That patch adds the RTC emulation of the HPET timer to the new RTC_DRV_CMOS. The old drivers/char/rtc.ko driver had that functionality and it's important on new systems. [akpm@linux-foundation.org: unbreak alpha build] Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: convert sync wait to use the irq write complete noticeMike Frysinger1-113/+136
- thus clearing out the need for spin locks - add a small optimization for reading of the rtc field Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: shave off another memcpy() by using assignment.Mike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: read_alarm() checks the enabled field, not the pending ↵Mike Frysinger1-2/+2
field. also, dont bother using memcpy since we can just do an assignment of the same structure. Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: use dev_dbg() rather than pr_stamp()Mike Frysinger1-26/+22
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: cleanup proc handler (we dont need RTC reg dump now ↵Mike Frysinger1-14/+12
that we have MMR filesystem in sysfs) Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: we pass in a (struct device*) to the irq handler, not a ↵Mike Frysinger1-2/+2
(struct platform_device*), so fix the irq handler Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Blackfin RTC driver: the frequency function is in units of Hz, not units of ↵Mike Frysinger1-7/+17
seconds, so lock our driver down to 1 Hz Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Platform real time clock driver for Dallas 1511 chipAndrew Sharp3-0/+667
Add RTC support for DS1511 RTC/WDT chip. Signed-off-by: Andy Sharp <andy.sharp@onstor.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc-cmos alarm acts as oneshotDavid Brownell3-7/+35
Start making the rtc-cmos alarm act more like a oneshot alarm by disabling that alarm after its IRQ fires. (ACPI hooks are also needed.) The Linux RTC framework has previously been a bit vague in this area, but any other behavior is problematic and not very portable. RTCs with full YYYY-MM-DD HH:MM[:SS] alarms won't have a problem here. Only ones with partial match criteria, with the most visible example being the PC RTC, get confused. (Because the criteria will match repeatedly.) Update comments relating to that oneshot behavior and timezone handling. (Timezones are another issue that's mostly visible with rtc-cmos. That's because PCs often dual-boot MS-Windows, which likes its RTC to match local wall-clock time instead of UTC.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc: ds1302 rtc supportPaul Mundt3-0/+269
This adds a basic ds1302 RTC driver, which is basically a cleanup and move of the in-tree SH SecureEdge5410 code (which is currently located in arch/sh/board/snapgear/rtc.c) to drivers/rtc. This aims to be a building block that the M32R and CRIS code can be worked on top of, so we can get rid of drivers/char/ds1302.c and arch/cris/arch-v10/drivers/ds1302.c respectively, though more work is needed for this. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc-cmos: export nvram in sysfsDavid Brownell1-12/+117
This makes rtc-cmos export its NVRAM, like several other RTC drivers. It still works within the limits of the current CMOS_READ/CMOS_WRITE calls, which don't understand how to access multiple register banks. The primary impact of that limitation is that Linux can't access the uppermost 128 bytes of NVRAM on many systems. Note that this isn't aiming to be a drop-in replacement for the legacy /dev/nvram support. (Presumably that has real users, and isn't just getting carried forward automatically?) Userspace handles more work: - When userspace code updates NVRAM, that will need to include updating any platform-specific checksums that may apply. - No /proc/driver/nvram file will parse and display NVRAM data according to whichever boot firmware your board expects. Also minor pnp-related updates: update a comment, remove dead code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc-s3c: Use is_power_of_2() macro for simplicity.Robert P. J. Day1-3/+2
Use is_power_of_2() macro for simplicity. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06rtc-pcf8583: Don't abuse I2C_M_NOSTARTJean Delvare1-17/+7
The rtc-pcf8583 driver is using the I2C_M_NOSTART flag but shouldn't. This flag is only meant for broken chips and the PCF8583 RTC chip is not one of these. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06Cosmetic fixes to RTC subsystem's KconfigAlessandro Zummo1-26/+30
Add adds a warning if a potentially conflicting RTC option has been selected and makes some other cosmetic fixes to the Kconfig. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: limit queued background requestsMiklos Szeredi3-46/+74
Libfuse basically creates a new thread for each new request. This is fine for synchronous requests, which are naturally limited. However background requests (especially writepage) can cause a thread creation storm. To avoid this, limit the number of background requests available to userspace. This is done by introducing another queue for background requests, and a counter for the number of "active" requests, which are currently available for userspace. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: save space in struct fuse_reqMiklos Szeredi2-13/+13
Move the fields 'dentry' and 'vfsmount' into the request specific union, since these are only used for the RELEASE request. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06fuse: fix attribute caching after createMiklos Szeredi1-0/+1
Invalidate attributes on create, since st_ctime is updated. Reported by Szabolcs Szakacsits. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: check for existing key_tfm at mount timeEric Sandeen3-17/+63
Jeff Moyer pointed out that a mount; umount loop of ecryptfs, with the same cipher & other mount options, created a new ecryptfs_key_tfm_cache item each time, and the cache could grow quite large this way. Looking at this with mhalcrow, we saw that ecryptfs_parse_options() unconditionally called ecryptfs_add_new_key_tfm(), which is what was adding these items. Refactor ecryptfs_get_tfm_and_mutex_for_cipher_name() to create a new helper function, ecryptfs_tfm_exists(), which checks for the cipher on the cached key_tfm_list, and sets a pointer to it if it exists. This can then be called from ecryptfs_parse_options(), and new key_tfm's can be added only when a cached one is not found. With list locking changes suggested by akpm. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: change the type of cipher_code from u16 to u8Trevor Highland3-10/+10
Only the lower byte of cipher_code is ever used, so it makes sense for its type to be u8. Signed-off-by: Trevor Highland <trevor.highland@gmail.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06eCryptfs: Minor fixes to printk messagesMichael Halcrow3-8/+10
The printk statements that result when the user does not have the proper key available could use some refining. Signed-off-by: Mike Halcrow <mhalcrow@us.ibm.com> Cc: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: remove debug as mount option, and warn if set via modprobeEric Sandeen2-20/+7
ecryptfs_debug really should not be a mount option; it is not per-mount, but rather sets a global "ecryptfs_verbosity" variable which affects all mounted filesysytems. It's already settable as a module load option, I think we can leave it at that. Also, if set, since secret values come out in debug messages, kick things off with a stern warning. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Mike Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06ecryptfs: make show_options reflect actual mount optionsEric Sandeen1-21/+31
Change ecryptfs_show_options to reflect the actual mount options in use. Note that this does away with the "dir=" output, which is not a valid mount option and appears to be unused. Mount options such as "ecryptfs_verbose" and "ecryptfs_xattr_metadata" are somewhat indeterminate for a given fs, but in any case the reported mount options can be used in a new mount command to get the same behavior. [akpm@linux-foundation.org: fix printk warning] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 17:28:10 +0300