| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ASoC soc-utils driver does not require the creation of a platform
device. Originally, this approach was chosen for simplicity when the
driver was first implemented.
With the introduction of the lightweight faux device interface, we now
have a more appropriate alternative. Migrate the driver to utilize the
faux bus, given that the platform device it previously created was not
a real one anyway. This will simplify the code, reducing its footprint
while maintaining functionality.
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250317-plat2faux_dev-v1-6-5fe67c085ad5@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce the 'widgets' property, allowing the creation of widgets from
4 template widgets: Microphone, Line, Headphone, and Speaker. Also
introduce the 'hp-det-gpios' property, which allows using headphone
detection using the specified GPIO.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250311163255.2664-3-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add binding for imx95's CM7 core, used for audio processing.
Additionally, introduce a common binding for NXP audio processors with
Sound Open Firmware (SOF) support.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://patch.msgid.link/20250311163255.2664-2-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for LT7170 and LT7171. The LT7170 and LT7171 are 20 A, 16 V,
Single- or Dual-Phase, Silent Switcher Step-Down Regulators with Digital
Power System Management.
The relevant registers in the LT7170 and LT7171 are similar to those in
the LTC3887, but with fewer channels. This adds the chip ID and
identification of ASCII to differentiate between the LT7170 and LT7171.
These devices support polling for status updates and clearing peak
values. The data format for voltage, current, and temperature is set to
IEEE754 for precision and compatibility.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-3-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add LTC7170 and LT7171 to supported devices of LTC2978. It has similar
set of registers to LTC3887, differing only in number of channels and
some PMBUS status and functionalities.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-2-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add LT7170 and LT7171 to compatible devices of LTC2978.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-1-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Adding the writel() calls needs io.h, which apparently gets
transiently included somewhere on arm64, but not elsewhere.
Fixes: 6de0298a3925 ("perf/arm_cspmu: Generalise event filtering")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202503150649.Dol8RBSh-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202503152245.cAG4FMfi-lkp@intel.com/
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/657935ca177024ad08d5ec6f85e8faf75f82cf65.1742212833.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
- Drop CONFIG_DM_KUNIT_TEST=m (auto-modular since commit
55b7aee990ef7862 ("drivers: base: test: Enable device model tests
with KUNIT_ALL_TESTS")),
- Re-enable modular build of MD Linear (append) mode (revived in
commit 127186cfb184eacc ("md: reintroduce md-linear").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/be6ac546f7b98eae352584daacc42a58577dc224.1738589762.git.geert@linux-m68k.org
|
|
Tie together the %[xa] in the XSAVE/XRSTOR definitions with the
respective usage in the asm macros so that it is perfectly clear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
|
|
Use the hidden bank register to identify whether the LDO voltage is
fixed or variable. Remove the read of 'richtek,fixed-microvolt'
property.
Fixes: af1296d15d89 ("regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/dae0321b710518ce32260336e3cc9caf2ba84215.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://patch.msgid.link/ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Open coded arithmetic in allocator arguments is discouraged [1]. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred.
[1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250317-sound-avs-kcalloc-v2-4-20e2a132b18f@ethancedwards.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Open coded arithmetic in allocator arguments is discouraged [1]. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred.
[1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250317-sound-avs-kcalloc-v2-3-20e2a132b18f@ethancedwards.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Open coded arithmetic in allocator arguments is discouraged [1]. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred.
[1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250317-sound-avs-kcalloc-v2-2-20e2a132b18f@ethancedwards.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Open coded arithmetic in allocator arguments is discouraged [1]. Helper
functions like kcalloc or, in this case, devm_kcalloc are preferred.
[1]: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250317-sound-avs-kcalloc-v2-1-20e2a132b18f@ethancedwards.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This entry has a wrong list, i2c instead of hwmon. Also, it states to
maintain Kconfig and Makefile which is not suitable for a single driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 7707cf82e138 ("dt-bindings: hwmon: Add lltc ltc4286 driver bindings")
Link: https://lore.kernel.org/r/20250317091459.41462-2-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Recent Ubuntu enforces 3-argument open() with O_CREAT:
CC /home/mingo/tip/tools/objtool/builtin-check.o
In file included from /usr/include/fcntl.h:341,
from builtin-check.c:9:
In function ‘open’,
inlined from ‘copy_file’ at builtin-check.c:201:11:
/usr/include/x86_64-linux-gnu/bits/fcntl2.h:52:11: error: call to ‘__open_missing_mode’ declared with attribute error: open with O_CREAT or O_TMPFILE in second argument needs 3 arguments
52 | __open_missing_mode ();
| ^~~~~~~~~~~~~~~~~~~~~~
Use 0400 as the most restrictive mode for the new file.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
|
|
Objtool warnings can be indicative of crashes, broken live patching, or
even boot failures. Ignoring them is not recommended.
Add CONFIG_OBJTOOL_WERROR to upgrade objtool warnings to errors by
enabling the objtool --Werror option. Also set --backtrace to print the
branches leading up to the warning, which can help considerably when
debugging certain warnings.
To avoid breaking bots too badly for now, make it the default for real
world builds only (!COMPILE_TEST).
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/3e7c109313ff15da6c80788965cc7450115b0196.1741975349.git.jpoimboe@kernel.org
|
|
With bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address
space qualifier") the normal compilers start caring about the __percpu
annotation, as such f67d1ffd841f ("perf/core: Detach 'struct
perf_cpu_pmu_context' and 'struct pmu' lifetimes") needs a fixup.
Fixes: f67d1ffd841f ("perf/core: Detach 'struct perf_cpu_pmu_context' and 'struct pmu' lifetimes")
Fixes: bcecd5a529c1 ("percpu: repurpose __percpu tag as a named address space qualifier")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: jirislaby@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Recreating objtool errors can be a manual process. Kbuild removes the
object, so it has to be compiled or linked again before running objtool.
Then the objtool args need to be reversed engineered.
Make that all easier by automatically making a backup of the object file
on error, and print a modified version of the args which can be used to
recreate.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/7571e30636359b3e173ce6e122419452bb31882f.1741975349.git.jpoimboe@kernel.org
|
|
This is similar to GCC's behavior and makes it more obvious why the
build failed.
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/56f0565b15b4b4caa9a08953fa9c679dfa973514.1741975349.git.jpoimboe@kernel.org
|
|
Any objtool warning has the potential of reflecting (or triggering) a
major bug in the kernel or compiler which could result in crashing the
kernel or breaking the livepatch consistency model.
In preparation for failing the build on objtool errors/warnings, add a
new --Werror option.
[ jpoimboe: commit log, comments, error out on fatal errors too ]
Co-developed-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/e423ea4ec297f510a108aa6c78b52b9fe30fa8c1.1741975349.git.jpoimboe@kernel.org
|
|
Add option to allow writing the changed binary to a separate file rather
than changing it in place.
Libelf makes this suprisingly hard, so take the easy way out and just
copy the file before editing it.
Also steal the -o short option from --orc. Nobody will notice ;-)
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/0da308d42d82b3bbed16a31a72d6bde52afcd6bd.1741975349.git.jpoimboe@kernel.org
|
|
Force the user to fix their cmdline if they forget the '--link' option.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8380bbf3a0fa86e03fd63f60568ae06a48146bc1.1741975349.git.jpoimboe@kernel.org
|
|
The option validations are a bit scattered, consolidate them.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/8f886502fda1d15f39d7351b70d4ebe5903da627.1741975349.git.jpoimboe@kernel.org
|
|
With unret validation enabled and IBT/LTO disabled, objtool runs on TUs
with --rethunk and on vmlinux.o with --unret. So this dependency isn't
valid as they don't always run on the same object.
This error never triggered before because --unret is always coupled with
--noinstr, so the first conditional in opts_valid() returns early due to
opts.noinstr being true.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/c6f5635784a28ed4b10ac4307b1858e015e6eff0.1741975349.git.jpoimboe@kernel.org
|
|
Increase the per-function WARN_FUNC() rate limit from 1 to 2. If the
number of warnings for a given function goes beyond 2, print "skipping
duplicate warning(s)". This helps root out additional warnings in a
function that might be hiding behind the first one.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/aec318d66c037a51c9f376d6fb0e8ff32812a037.1741975349.git.jpoimboe@kernel.org
|
|
Fix some outdated information in the objtool doc.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/2552ee8b48631127bf269359647a7389edf5f002.1741975349.git.jpoimboe@kernel.org
|
|
Clarify what needs to be done to resolve the missing __noreturn warning.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/ab835a35d00bacf8aff0b56257df93f14fdd8224.1741975349.git.jpoimboe@kernel.org
|
|
Make sure all fatal errors are funneled through the 'out' label with a
negative ret.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/0f49d6a27a080b4012e84e6df1e23097f44cc082.1741975349.git.jpoimboe@kernel.org
|
|
The CONFIG_X86_ESPFIX64 version of exc_double_fault() can return to its
caller, but the !CONFIG_X86_ESPFIX64 version never does. In the latter
case the compiler and/or objtool may consider it to be implicitly
noreturn.
However, due to the currently inflexible way objtool detects noreturns,
a function's noreturn status needs to be consistent across configs.
The current workaround for this issue is to suppress unreachable
warnings for exc_double_fault()'s callers. Unfortunately that can
result in ORC coverage gaps and potentially worse issues like inert
static calls and silently disabled CPU mitigations.
Instead, prevent exc_double_fault() from ever being implicitly marked
noreturn by forcing a return behind a never-taken conditional.
Until a more integrated noreturn detection method exists, this is likely
the least objectionable workaround.
Fixes: 55eeab2a8a11 ("objtool: Ignore exc_double_fault() __noreturn warnings")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Brendan Jackman <jackmanb@google.com>
Link: https://lore.kernel.org/r/d1f4026f8dc35d0de6cc61f2684e0cb6484009d1.1741975349.git.jpoimboe@kernel.org
|
|
dl_rebuild_rd_accounting() is defined in cpuset.c, so it makes more
sense to move related declarations to cpuset.h.
Implement the move.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSOVMpU7jpVrMU@jlelli-thinkpadt14gen4.remote.csb
|
|
The are no callers of partition_sched_domains_locked() outside
topology.c.
Stop exposing such function.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MSC96a8FcqWV3G@jlelli-thinkpadt14gen4.remote.csb
|
|
partition_and_rebuild_sched_domains() and partition_sched_domains() are
now equivalent.
Remove the former as a nice clean up.
Suggested-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MR4ryNDJZDzsSG@jlelli-thinkpadt14gen4.remote.csb
|
|
We completely clean and restore root domains bandwidth accounting after
every root domains change, so the dl_clear_root_domain() call in
partition_sched_domains_locked() is redundant.
Remove it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <llong@redhat.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRtcX4tz4tcLRR@jlelli-thinkpadt14gen4.remote.csb
|
|
Rebuilding of root domains accounting information (total_bw) is
currently broken on some cases, e.g. suspend/resume on aarch64. Problem
is that the way we keep track of domain changes and try to add bandwidth
back is convoluted and fragile.
Fix it by simplify things by making sure bandwidth accounting is cleared
and completely restored after root domains changes (after root domains
are again stable).
To be sure we always call dl_rebuild_rd_accounting while holding
cpuset_mutex we also add cpuset_reset_sched_domains() wrapper.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Co-developed-by: Waiman Long <llong@redhat.com>
Signed-off-by: Waiman Long <llong@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MRfeJKJUOyUSto@jlelli-thinkpadt14gen4.remote.csb
|
|
Bandwidth checks and updates that work on root domains currently employ
a cookie mechanism for efficiency. This mechanism is very much tied to
when root domains are first created and initialized.
Generalize the cookie mechanism so that it can be used also later at
runtime while updating root domains. Also, additionally guard it with
sched_domains_mutex, since domains need to be stable while updating them
(and it will be required for further dynamic changes).
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MQaiXPvEeW_v7x@jlelli-thinkpadt14gen4.remote.csb
|
|
Create wrappers for sched_domains_mutex so that it can transparently be
used on both CONFIG_SMP and !CONFIG_SMP, as some function will need to
do.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/Z9MP5Oq9RB8jBs3y@jlelli-thinkpadt14gen4.remote.csb
|
|
SCHED_DEADLINE special tasks get a fake bandwidth that is only used to
make sure sleeping and priority inheritance 'work', but it is ignored
for runtime enforcement and admission control.
Be consistent with it also when rebuilding root domains.
Fixes: 53916d5fd3c0 ("sched/deadline: Check bandwidth overflow earlier for hotplug")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20250313170011.357208-2-juri.lelli@redhat.com
|
|
Use preempt_model_str() instead of manually conducting the preemption
model.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Steven Rostedt (Google)" <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-10-bigeasy@linutronix.de
|
|
die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-9-bigeasy@linutronix.de
|
|
After __die_header(), __die_body() is always invoked. There we have
show_regs() -> show_regs_print_info() which prints the current
preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-8-bigeasy@linutronix.de
|
|
die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-7-bigeasy@linutronix.de
|
|
After the first printk in __die() there is show_regs() ->
show_regs_print_info() which prints the current
preemption model.
Remove the preempion model from the arch code.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-6-bigeasy@linutronix.de
|
|
__die() invokes later show_regs() -> show_regs_print_info() which prints
the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250314160810.2373416-5-bigeasy@linutronix.de
|
|
__die() invokes later __show_regs() -> show_regs_print_info() which
prints the current preemption model.
Remove it from the initial line.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20250314160810.2373416-4-bigeasy@linutronix.de
|
|
Use preempt_model_str() to print the current preemption model. Use
pr_warn() instead of printk() to pass a loglevel. This makes it part of
generic WARN/ BUG traces.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314160810.2373416-3-bigeasy@linutronix.de
|
|
The pmu specific data is saved in task_struct now. Remove it from event
context structure.
Remove swap_task_ctx() as well.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250314172700.438923-7-kan.liang@linux.intel.com
|
