summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-07-07x86/irq: Retrieve irq data after locking irq_descThomas Gleixner1-1/+6
irq_data is protected by irq_desc->lock, so retrieving the irq chip from irq_data outside the lock is racy vs. an concurrent update. Move it into the lock held region. While at it add a comment why the vector walk does not require vector_lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.331320612@linutronix.de
2015-07-07x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable()Thomas Gleixner1-1/+12
It's unsafe to examine fields in the irq descriptor w/o holding the descriptor lock. Add proper locking. While at it add a comment why the vector check can run lock less Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: xiao jin <jin.xiao@intel.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.236544164@linutronix.de
2015-07-07x86/irq: Plug irq vector hotplug raceThomas Gleixner2-16/+7
Jin debugged a nasty cpu hotplug race which results in leaking a irq vector on the newly hotplugged cpu. cpu N cpu M native_cpu_up device_shutdown do_boot_cpu free_msi_irqs start_secondary arch_teardown_msi_irqs smp_callin default_teardown_msi_irqs setup_vector_irq arch_teardown_msi_irq __setup_vector_irq native_teardown_msi_irq lock(vector_lock) destroy_irq install vectors unlock(vector_lock) lock(vector_lock) ---> __clear_irq_vector unlock(vector_lock) lock(vector_lock) set_cpu_online unlock(vector_lock) This leaves the irq vector(s) which are torn down on CPU M stale in the vector array of CPU N, because CPU M does not see CPU N online yet. There is a similar issue with concurrent newly setup interrupts. The alloc/free protection of irq descriptors does not prevent the above race, because it merily prevents interrupt descriptors from going away or changing concurrently. Prevent this by moving the call to setup_vector_irq() into the vector_lock held region which protects set_cpu_online(): cpu N cpu M native_cpu_up device_shutdown do_boot_cpu free_msi_irqs start_secondary arch_teardown_msi_irqs smp_callin default_teardown_msi_irqs lock(vector_lock) arch_teardown_msi_irq setup_vector_irq() __setup_vector_irq native_teardown_msi_irq install vectors destroy_irq set_cpu_online unlock(vector_lock) lock(vector_lock) __clear_irq_vector unlock(vector_lock) So cpu M either sees the cpu N online before clearing the vector or cpu N installs the vectors after cpu M has cleared it. Reported-by: xiao jin <jin.xiao@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <jroedel@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com> Link: http://lkml.kernel.org/r/20150705171102.141898931@linutronix.de
2015-07-06x86/earlyprintk: Allow early_printk() to use console style parameters like ↵Steven Rostedt1-1/+3
'115200n8' When I enable early_printk on a kernel, I cut and paste the console= input and add to earlyprintk parameter. But I notice recently that ktest has not been detecting triple faults. The way it detects it, is by seeing the kernel banner "Linux version .." with a different kernel version pop up. Then I noticed that early printk was no longer working on my console, which was why ktest was not seeing it. I bisected it down and it was added to 4.0 with this commit: ea9e9d802902 ("Specify PCI based UART for earlyprintk") because it converted the simple_strtoul() that converts the baud number into a kstrtoul(). The problem with this is, I had as my baud rate, 115200n8 (acceptable for console=ttyS0), but because of the "n8", the kstrtoul() doesn't parse the baud rate and returns an error, which sets the baud rate to the default 9600. This explains the garbage on my screen. Now, earlyprintk= kernel parameter does not say it accepts that format. Thus, one answer would simply be me changing my kernel parameters to remove the "n8" since it isn't parsed anyway. But I wonder if other people run into this, and it seems strange that the two consoles for serial accepts different input. I could also extend this to have earlyprintk do something with that "n8" or whatever it has and have it match the console parsing (which, BTW, still uses simple_strtoul(), as I guess it has to). This patch just makes my old kernel parameter parsing work like it use to. Although, simple_strtoull() is considered obsolete, it is the only standard string parsing function that parses a number that is attached to text. Ironically, commit ea9e9d802902 also added several calls to simple_strtoul()! Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stuart R. Anderson <stuart.r.anderson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20150706101434.5f6a351b@gandalf.local.home [ Cleaned it up a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/espfix: Init espfix on the boot CPU sideZhu Guihua2-15/+20
As we alloc pages with GFP_KERNEL in init_espfix_ap() which is called before we enable local irqs, so the lockdep sub-system would (correctly) trigger a warning about the potentially blocking API. So we allocate them on the boot CPU side when the secondary CPU is brought up by the boot CPU, and hand them over to the secondary CPU. And we use alloc_pages_node() with the secondary CPU's node, to make sure the espfix stack is NUMA-local to the CPU that is going to use it. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: <bp@alien8.de> Cc: <luto@amacapital.net> Cc: <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c97add2670e9abebb90095369f0cfc172373ac94.1435824469.git.zhugh.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/espfix: Add 'cpu' parameter to init_espfix_ap()Zhu Guihua3-6/+5
Add a CPU index parameter to init_espfix_ap(), so that the parameter could be propagated to the function for espfix page allocation. Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Cc: <bp@alien8.de> Cc: <luto@amacapital.net> Cc: <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/cde3fcf1b3211f3f03feb1a995bce3fee850f0fc.1435824469.git.zhugh.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Move KASAN_SHADOW_OFFSET to the arch KconfigAndrey Ryabinin2-4/+5
KASAN_SHADOW_OFFSET is purely arch specific setting, so it should be in arch's Kconfig file. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-7-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Add message about KASAN being initializedAndrey Ryabinin1-0/+3
Print informational message to tell user that kernel runs with KASAN enabled. Add a "kasan: " prefix to all messages in kasan_init_64.c. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-6-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Fix boot crash on AMD processorsAndrey Ryabinin1-3/+3
While populating zero shadow wrong bits in upper level page tables used. __PAGE_KERNEL_RO that was used for pgd/pud/pmd has _PAGE_BIT_GLOBAL set. Global bit is present only in the lowest level of the page translation hierarchy (ptes), and it should be zero in upper levels. This bug seems doesn't cause any troubles on Intel cpus, while on AMDs it cause kernel crash on boot. Use _KERNPG_TABLE bits for pgds/puds/pmds to fix this. Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-5-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Flush TLBs after switching CR3Andrey Ryabinin1-0/+2
load_cr3() doesn't cause tlb_flush if PGE enabled. This may cause tons of false positive reports spamming the kernel to death. To fix this __flush_tlb_all() should be called explicitly after CR3 changed. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-4-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/kasan: Fix KASAN shadow region page tablesAlexander Popov4-42/+38
Currently KASAN shadow region page tables created without respect of physical offset (phys_base). This causes kernel halt when phys_base is not zero. So let's initialize KASAN shadow region page tables in kasan_early_init() using __pa_nodebug() which considers phys_base. This patch also separates x86_64_start_kernel() from KASAN low level details by moving kasan_map_early_shadow(init_level4_pgt) into kasan_early_init(). Remove the comment before clear_bss() which stopped bringing much profit to the code readability. Otherwise describing all the new order dependencies would be too verbose. Signed-off-by: Alexander Popov <alpopov@ptsecurity.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-3-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/init: Clear 'init_level4_pgt' earlierAndrey Ryabinin1-1/+2
Currently x86_64_start_kernel() has two KASAN related function calls. The first call maps shadow to early_level4_pgt, the second maps shadow to init_level4_pgt. If we move clear_page(init_level4_pgt) earlier, we could hide KASAN low level detail from generic x86_64 initialization code. The next patch will do it. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: <stable@vger.kernel.org> # 4.0+ Cc: Alexander Popov <alpopov@ptsecurity.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1435828178-10975-2-git-send-email-a.ryabinin@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-06x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()Adrian Hunter1-1/+10
If it takes longer than 12us to read the PIT counter lsb/msb, then the error margin will never fall below 500ppm within 50ms, and Fast TSC calibration will always fail. This patch detects when that will happen and fails fast. Note the failure message is not printed in that case because: 1. it will always happen on that class of hardware 2. the absence of the message is more informative than its presence Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/556EB717.9070607@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-05Linux 4.2-rc1v4.2-rc1Linus Torvalds1-2/+2
2015-07-05Merge tag 'platform-drivers-x86-v4.2-2' of ↵Linus Torvalds7-45/+1004
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull late x86 platform driver updates from Darren Hart: "The following came in a bit later and I wanted them to bake in next a few more days before submitting, thus the second pull. A new intel_pmc_ipc driver, a symmetrical allocation and free fix in dell-laptop, a couple minor fixes, and some updated documentation in the dell-laptop comments. intel_pmc_ipc: - Add Intel Apollo Lake PMC IPC driver tc1100-wmi: - Delete an unnecessary check before the function call "kfree" dell-laptop: - Fix allocating & freeing SMI buffer page - Show info about WiGig and UWB in debugfs - Update information about wireless control" * tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver tc1100-wmi: Delete an unnecessary check before the function call "kfree" dell-laptop: Fix allocating & freeing SMI buffer page dell-laptop: Show info about WiGig and UWB in debugfs dell-laptop: Update information about wireless control
2015-07-05Merge branch 'for-linus' of ↵Linus Torvalds99-553/+784
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...
2015-07-05bluetooth: fix list handlingLinus Torvalds2-2/+3
Commit 835a6a2f8603 ("Bluetooth: Stop sabotaging list poisoning") thought that the code was sabotaging the list poisoning when NULL'ing out the list pointers and removed it. But what was going on was that the bluetooth code was using NULL pointers for the list as a way to mark it empty, and that commit just broke it (and replaced the test with NULL with a "list_empty()" test on a uninitialized list instead, breaking things even further). So fix it all up to use the regular and real list_empty() handling (which does not use NULL, but a pointer to itself), also making sure to initialize the list properly (the previous NULL case was initialized implicitly by the session being allocated with kzalloc()) This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong An. [ I would normally expect to get this through the bt tree, but I'm going to release -rc1, so I'm just committing this directly - Linus ] Reported-and-tested-by: Jörg Otte <jrg.otte@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Original-by: Tedd Ho-Jeong An <tedd.an@intel.com> Original-by: Marcel Holtmann <marcel@holtmann.org>: Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-07-05Merge branch 'for-next' of ↵Linus Torvalds68-6312/+3163
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "It's been a busy development cycle for target-core in a number of different areas. The fabric API usage for se_node_acl allocation is now within target-core code, dropping the external API callers for all fabric drivers tree-wide. There is a new conversion to RCU hlists for se_node_acl and se_portal_group LUN mappings, that turns fast-past LUN lookup into a completely lockless code-path. It also removes the original hard-coded limitation of 256 LUNs per fabric endpoint. The configfs attributes for backends can now be shared between core and driver code, allowing existing drivers to use common code while still allowing flexibility for new backend provided attributes. The highlights include: - Merge sbc_verify_dif_* into common code (sagi) - Remove iscsi-target support for obsolete IFMarker/OFMarker (Christophe Vu-Brugier) - Add bidi support in target/user backend (ilias + vangelis + agover) - Move se_node_acl allocation into target-core code (hch) - Add crc_t10dif_update common helper (akinobu + mkp) - Handle target-core odd SGL mapping for data transfer memory (akinobu) - Move transport ID handling into target-core (hch) - Move task tag into struct se_cmd + support 64-bit tags (bart) - Convert se_node_acl->device_list[] to RCU hlist (nab + hch + paulmck) - Convert se_portal_group->tpg_lun_list[] to RCU hlist (nab + hch + paulmck) - Simplify target backend driver registration (hch) - Consolidate + simplify target backend attribute implementations (hch + nab) - Subsume se_port + t10_alua_tg_pt_gp_member into se_lun (hch) - Drop lun_sep_lock for se_lun->lun_se_dev RCU usage (hch + nab) - Drop unnecessary core_tpg_register TFO parameter (nab) - Use 64-bit LUNs tree-wide (hannes) - Drop left-over TARGET_MAX_LUNS_PER_TRANSPORT limit (hannes)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (76 commits) target: Bump core version to v5.0 target: remove target_core_configfs.h target: remove unused TARGET_CORE_CONFIG_ROOT define target: consolidate version defines target: implement WRITE_SAME with UNMAP bit using ->execute_unmap target: simplify UNMAP handling target: replace se_cmd->execute_rw with a protocol_data field target/user: Fix inconsistent kmap_atomic/kunmap_atomic target: Send UA when changing LUN inventory target: Send UA upon LUN RESET tmr completion target: Send UA on ALUA target port group change target: Convert se_lun->lun_deve_lock to normal spinlock target: use 'se_dev_entry' when allocating UAs target: Remove 'ua_nacl' pointer from se_ua structure target_core_alua: Correct UA handling when switching states xen-scsiback: Fix compile warning for 64-bit LUN target: Remove TARGET_MAX_LUNS_PER_TRANSPORT target: use 64-bit LUNs target: Drop duplicate + unused se_dev_check_wce target: Drop unnecessary core_tpg_register TFO parameter ...
2015-07-05Merge tag 'ntb-4.2' of git://github.com/jonmason/ntbLinus Torvalds23-2816/+5545
Pull NTB updates from Jon Mason: "This includes a pretty significant reworking of the NTB core code, but has already produced some significant performance improvements. An abstraction layer was added to allow the hardware and clients to be easily added. This required rewriting the NTB transport layer for this abstraction layer. This modification will allow future "high performance" NTB clients. In addition to this change, a number of performance modifications were added. These changes include NUMA enablement, using CPU memcpy instead of asyncdma, and modification of NTB layer MTU size" * tag 'ntb-4.2' of git://github.com/jonmason/ntb: (22 commits) NTB: Add split BAR output for debugfs stats NTB: Change WARN_ON_ONCE to pr_warn_once on unsafe NTB: Print driver name and version in module init NTB: Increase transport MTU to 64k from 16k NTB: Rename Intel code names to platform names NTB: Default to CPU memcpy for performance NTB: Improve performance with write combining NTB: Use NUMA memory in Intel driver NTB: Use NUMA memory and DMA chan in transport NTB: Rate limit ntb_qp_link_work NTB: Add tool test client NTB: Add ping pong test client NTB: Add parameters for Intel SNB B2B addresses NTB: Reset transport QP link stats on down NTB: Do not advance transport RX on link down NTB: Differentiate transport link down messages NTB: Check the device ID to set errata flags NTB: Enable link for Intel root port mode in probe NTB: Read peer info from local SPAD in transport NTB: Split ntb_hw_intel and ntb_transport drivers ...
2015-07-049p: cope with bogus responses from server in p9_client_{read,write}Al Viro1-0/+8
if server claims to have written/read more than we'd told it to, warn and cap the claimed byte count to avoid advancing more than we are ready to.
2015-07-04p9_client_write(): avoid double p9_free_req()Al Viro1-0/+1
Braino in "9p: switch p9_client_write() to passing it struct iov_iter *"; if response is impossible to parse and we discard the request, get the out of the loop right there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-049p: forgetting to cancel request on interrupted zero-copy RPCAl Viro1-1/+2
If we'd already sent a request and decide to abort it, we *must* issue TFLUSH properly and not just blindly reuse the tag, or we'll get seriously screwed when response eventually arrives and we confuse it for response to later request that had reused the same tag. Cc: stable@vger.kernel.org # v3.2 and later Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: bdev_direct_access() may sleepMatthew Wilcox1-0/+6
The brd driver is the only in-tree driver that may sleep currently. After some discussion on linux-fsdevel, we decided that any driver may choose to sleep in its ->direct_access method. To ensure that all callers of bdev_direct_access() are prepared for this, add a call to might_sleep(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04block: Add support for DAX reads/writes to block devicesMatthew Wilcox2-2/+8
If a block device supports the ->direct_access methods, bypass the normal DIO path and use DAX to go straight to memcpy() instead of allocating a DIO and a BIO. Includes support for the DIO_SKIP_DIO_COUNT flag in DAX, as is done in do_blockdev_direct_IO(). Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Use copy_from_iter_nocacheMatthew Wilcox1-1/+1
When userspace does a write, there's no need for the written data to pollute the CPU cache. This matches the original XIP code. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04dax: Add block size note to documentationMatthew Wilcox1-2/+4
For block devices which are small enough, mkfs will default to creating a filesystem with block sizes smaller than page size. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-07-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds10-16/+54
Pull kvm fixes from Paolo Bonzini: "Except for the preempt notifiers fix, these are all small bugfixes that could have been waited for -rc2. Sending them now since I was taking care of Peter's patch anyway" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: add hyper-v crash msrs values KVM: x86: remove data variable from kvm_get_msr_common KVM: s390: virtio-ccw: don't overwrite config space values KVM: x86: keep track of LVT0 changes under APICv KVM: x86: properly restore LVT0 KVM: x86: make vapics_in_nmi_mode atomic sched, preempt_notifier: separate notifier registration from static_key inc/dec
2015-07-04NTB: Add split BAR output for debugfs statsDave Jiang1-15/+68
When split BAR is enabled, the driver needs to dump out the split BAR registers rather than the original 64bit BAR registers. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Change WARN_ON_ONCE to pr_warn_once on unsafeDave Jiang1-8/+16
The unsafe doorbell and scratchpad access should display reason when WARN is called. Otherwise we get a stack dump without any explanation. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Print driver name and version in module initDave Jiang2-0/+6
Printouts driver name and version to indicate what is being loaded. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Increase transport MTU to 64k from 16kDave Jiang1-1/+1
Benchmarking showed a significant performance increase with the MTU size to 64k instead of 16k. Change the driver default to 64k. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rename Intel code names to platform namesDave Jiang3-465/+465
Instead of using the platform code names, use the correct platform names to identify the respective Intel NTB hardware. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Default to CPU memcpy for performanceDave Jiang1-4/+13
Disable DMA usage by default, since the CPU provides much better performance with write combining. Provide a module parameter to enable DMA usage when offloading the memcpy is preferred. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Improve performance with write combiningDave Jiang1-1/+10
Changing the memory window BAR mappings to write combining significantly boosts the performance. We will also use memcpy that uses non-temporal store, which showed performance improvement when doing non-cached memcpys. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory in Intel driverAllen Hubbe1-6/+12
Allocate memory for the NUMA node of the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Use NUMA memory and DMA chan in transportAllen Hubbe1-14/+32
Allocate memory and request the DMA channel for the same NUMA node as the NTB device. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Rate limit ntb_qp_link_workAllen Hubbe1-1/+1
When the ntb transport is connecting and waiting for the peer, the debug console receives lots of debug level messages about the remote qp link status being down. Rate limit those messages. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add tool test clientAllen Hubbe4-0/+600
This is a simple debugging driver that enables the doorbell and scratch pad registers to be read and written from the debugfs. This tool enables more complicated debugging to be scripted from user space. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add ping pong test clientAllen Hubbe6-1/+289
This is a simple ping pong driver that exercises the scratch pads and doorbells of the ntb hardware. This driver may be used to test that your ntb hardware and drivers are functioning at a basic level. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add parameters for Intel SNB B2B addressesAllen Hubbe2-19/+68
Add module parameters for the addresses to be used in B2B topology. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Reset transport QP link stats on downAllen Hubbe1-8/+28
Reset the link stats when the link goes down. In particular, the TX and RX index and count must be reset, or else the TX side will be sending packets to the RX side where the RX side is not expecting them. Reset all the stats, to be consistent. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Do not advance transport RX on link downAllen Hubbe1-2/+1
On link down, don't advance RX index to the next entry. The next entry should never be valid after receiving the link down flag. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Differentiate transport link down messagesAllen Hubbe1-2/+2
The same message "qp %d: Link Down\n" was printed at two locations in ntb_transport. Change the messages so they are distinct. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Check the device ID to set errata flagsDave Jiang1-5/+44
Set errata flags for the specific device IDs to which they apply, instead of the whole Xeon hardware class. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Enable link for Intel root port mode in probeDave Jiang1-0/+10
Link training should be enabled in the driver probe for root port mode. We should not have to wait for transport to be loaded for this to happen. Otherwise the ntb device will not show up on the transparent bridge side of the link. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Read peer info from local SPAD in transportDave Jiang1-5/+5
The transport was writing and then reading the peer scratch pad, essentially reading what it just wrote instead of exchanging any information with the peer. The transport expects the peer values to be the same as the local values, so this issue was not obvious. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Split ntb_hw_intel and ntb_transport driversAllen Hubbe13-2194/+2588
Change ntb_hw_intel to use the new NTB hardware abstraction layer. Split ntb_transport into its own driver. Change it to use the new NTB hardware abstraction layer. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04NTB: Add NTB hardware abstraction layerAllen Hubbe5-1/+1271
Abstract the NTB device behind a programming interface, so that it can support different hardware and client drivers. Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-07-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-18/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Thomas Gleixner: "The last update for 4.2 is just moving a macro from a local header to the global one, so it can be used in architecture code as well. Cleanup of the now empty local header is 4.3 material" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h
2015-07-04Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two FPU rewrite related fixes. This addresses all known x86 regressions at this stage. Also some other misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu: Fix boot crash in the early FPU code x86/asm/entry/64: Update path names x86/fpu: Fix FPU related boot regression when CPUID masking BIOS feature is enabled x86/boot/setup: Clean up the e820_reserve_setup_data() code x86/kaslr: Fix typo in the KASLR_FLAG documentation
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 07:35:51 +0300