summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23Merge branch ↵Jakub Kicinski9-96/+96
'dccp-tcp-fix-bhash2-issues-related-to-warn_on-in-inet_csk_get_port' Kuniyuki Iwashima says: ==================== dccp/tcp: Fix bhash2 issues related to WARN_ON() in inet_csk_get_port(). syzkaller was hitting a WARN_ON() in inet_csk_get_port() in the 4th patch, which was because we forgot to fix up bhash2 bucket when connect() for a socket bound to a wildcard address fails in __inet_stream_connect(). There was a similar report [0], but its repro does not fire the WARN_ON() due to inconsistent error handling. When connect() for a socket bound to a wildcard address fails, saddr may or may not be reset depending on where the failure happens. When we fail in __inet_stream_connect(), sk->sk_prot->disconnect() resets saddr. OTOH, in (dccp|tcp)_v[46]_connect(), if we fail after inet_hash6?_connect(), we forget to reset saddr. We fix this inconsistent error handling in the 1st patch, and then we'll fix the bhash2 WARN_ON() issue. Note that there is still an issue in that we reset saddr without checking if there are conflicting sockets in bhash and bhash2, but this should be another series. See [1][2] for the previous discussion. [0]: https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/ [1]: https://lore.kernel.org/netdev/20221029001249.86337-1-kuniyu@amazon.com/ [2]: https://lore.kernel.org/netdev/20221103172419.20977-1-kuniyu@amazon.com/ [3]: https://lore.kernel.org/netdev/20221118081906.053d5231@kernel.org/T/#m00aafedb29ff0b55d5e67aef0252ef1baaf4b6ee ==================== Link: https://lore.kernel.org/r/20221119014914.31792-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23dccp/tcp: Fixup bhash2 bucket when connect() fails.Kuniyuki Iwashima8-16/+41
If a socket bound to a wildcard address fails to connect(), we only reset saddr and keep the port. Then, we have to fix up the bhash2 bucket; otherwise, the bucket has an inconsistent address in the list. Also, listen() for such a socket will fire the WARN_ON() in inet_csk_get_port(). [0] Note that when a system runs out of memory, we give up fixing the bucket and unlink sk from bhash and bhash2 by inet_put_port(). [0]: WARNING: CPU: 0 PID: 207 at net/ipv4/inet_connection_sock.c:548 inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Modules linked in: CPU: 0 PID: 207 Comm: bhash2_prev_rep Not tainted 6.1.0-rc3-00799-gc8421681c845 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 RIP: 0010:inet_csk_get_port (net/ipv4/inet_connection_sock.c:548 (discriminator 1)) Code: 74 a7 eb 93 48 8b 54 24 18 0f b7 cb 4c 89 e6 4c 89 ff e8 48 b2 ff ff 49 8b 87 18 04 00 00 e9 32 ff ff ff 0f 0b e9 34 ff ff ff <0f> 0b e9 42 ff ff ff 41 8b 7f 50 41 8b 4f 54 89 fe 81 f6 00 00 ff RSP: 0018:ffffc900003d7e50 EFLAGS: 00010202 RAX: ffff8881047fb500 RBX: 0000000000004e20 RCX: 0000000000000000 RDX: 000000000000000a RSI: 00000000fffffe00 RDI: 00000000ffffffff RBP: ffffffff8324dc00 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000004e20 R15: ffff8881054e1280 FS: 00007f8ac04dc740(0000) GS:ffff88842fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020001540 CR3: 00000001055fa003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> inet_csk_listen_start (net/ipv4/inet_connection_sock.c:1205) inet_listen (net/ipv4/af_inet.c:228) __sys_listen (net/socket.c:1810) __x64_sys_listen (net/socket.c:1819 net/socket.c:1817 net/socket.c:1817) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f8ac051de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 93 af 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc1c177248 EFLAGS: 00000206 ORIG_RAX: 0000000000000032 RAX: ffffffffffffffda RBX: 0000000020001550 RCX: 00007f8ac051de5d RDX: ffffffffffffff80 RSI: 0000000000000000 RDI: 0000000000000004 RBP: 00007ffc1c177270 R08: 0000000000000018 R09: 0000000000000007 R10: 0000000020001540 R11: 0000000000000206 R12: 00007ffc1c177388 R13: 0000000000401169 R14: 0000000000403e18 R15: 00007f8ac0723000 </TASK> Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23dccp/tcp: Update saddr under bhash's lock.Kuniyuki Iwashima7-86/+56
When we call connect() for a socket bound to a wildcard address, we update saddr locklessly. However, it could result in a data race; another thread iterating over bhash might see a corrupted address. Let's update saddr under the bhash bucket's lock. Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23dccp/tcp: Remove NULL check for prev_saddr in inet_bhash2_update_saddr().Kuniyuki Iwashima1-7/+4
When we call inet_bhash2_update_saddr(), prev_saddr is always non-NULL. Let's remove the unnecessary test. Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-23dccp/tcp: Reset saddr on failure after inet6?_hash_connect().Kuniyuki Iwashima4-0/+8
When connect() is called on a socket bound to the wildcard address, we change the socket's saddr to a local address. If the socket fails to connect() to the destination, we have to reset the saddr. However, when an error occurs after inet_hash6?_connect() in (dccp|tcp)_v[46]_conect(), we forget to reset saddr and leave the socket bound to the address. From the user's point of view, whether saddr is reset or not varies with errno. Let's fix this inconsistent behaviour. Note that after this patch, the repro [0] will trigger the WARN_ON() in inet_csk_get_port() again, but this patch is not buggy and rather fixes a bug papering over the bhash2's bug for which we need another fix. For the record, the repro causes -EADDRNOTAVAIL in inet_hash6_connect() by this sequence: s1 = socket() s1.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s1.bind(('127.0.0.1', 10000)) s1.sendto(b'hello', MSG_FASTOPEN, (('127.0.0.1', 10000))) # or s1.connect(('127.0.0.1', 10000)) s2 = socket() s2.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1) s2.bind(('0.0.0.0', 10000)) s2.connect(('127.0.0.1', 10000)) # -EADDRNOTAVAIL s2.listen(32) # WARN_ON(inet_csk(sk)->icsk_bind2_hash != tb2); [0]: https://syzkaller.appspot.com/bug?extid=015d756bbd1f8b5c8f09 Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6") Fixes: 7c657876b63c ("[DCCP]: Initial implementation") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Joanne Koong <joannelkoong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22tsnep: Fix rotten packetsGerhard Engleder1-1/+56
If PTP synchronisation is done every second, then sporadic the interval is higher than one second: ptp4l[696.582]: master offset -17 s2 freq -1891 path delay 573 ptp4l[697.582]: master offset -22 s2 freq -1901 path delay 573 ptp4l[699.368]: master offset -1 s2 freq -1887 path delay 573 ^^^^^^^ Should be 698.582! This problem is caused by rotten packets, which are received after polling but before interrupts are enabled again. This can be fixed by checking for pending work and rescheduling if necessary after interrupts has been enabled again. Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20221119211825.81805-1-gerhard@engleder-embedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22octeontx2-pf: Remove duplicate MACSEC settingZheng Bin1-1/+0
Commit 4581dd480c9e ("net: octeontx2-pf: mcs: consider MACSEC setting") has already added "depends on MACSEC || !MACSEC", so remove it. Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20221119133616.3583538-1-zhengbin13@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22bnx2x: fix pci device refcount leak in bnx2x_vf_is_pcie_pending()Yang Yingliang1-4/+8
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). Call pci_dev_put() before returning from bnx2x_vf_is_pcie_pending() to avoid refcount leak. Fixes: b56e9670ffa4 ("bnx2x: Prepare device and initialize VF database") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20221119070202.1407648-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22NFC: nci: fix memory leak in nci_rx_data_packet()Liu Shixin1-1/+3
Syzbot reported a memory leak about skb: unreferenced object 0xffff88810e144e00 (size 240): comm "syz-executor284", pid 3701, jiffies 4294952403 (age 12.620s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83ab79a9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:497 [<ffffffff82a5cf64>] alloc_skb include/linux/skbuff.h:1267 [inline] [<ffffffff82a5cf64>] virtual_ncidev_write+0x24/0xe0 drivers/nfc/virtual_ncidev.c:116 [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:759 [inline] [<ffffffff815f6503>] do_loop_readv_writev fs/read_write.c:743 [inline] [<ffffffff815f6503>] do_iter_write+0x253/0x300 fs/read_write.c:863 [<ffffffff815f66ed>] vfs_writev+0xdd/0x240 fs/read_write.c:934 [<ffffffff815f68f6>] do_writev+0xa6/0x1c0 fs/read_write.c:977 [<ffffffff848802d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff848802d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a00087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd In nci_rx_data_packet(), if we don't get a valid conn_info, we will return directly but forget to release the skb. Reported-by: syzbot+cdb9a427d1bc08815104@syzkaller.appspotmail.com Fixes: 4aeee6871e8c ("NFC: nci: Add dynamic logical connections support") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Link: https://lore.kernel.org/r/20221118082419.239475-1-liushixin2@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22net: sched: allow act_ct to be built without NF_NATXin Long1-1/+1
In commit f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT"), it fixed the build failure when NF_NAT is m and NET_ACT_CT is y by adding depends on NF_NAT for NET_ACT_CT. However, it would also cause NET_ACT_CT cannot be built without NF_NAT, which is not expected. This patch fixes it by changing to use "(!NF_NAT || NF_NAT)" as the depend. Fixes: f11fe1dae1c4 ("net/sched: Make NET_ACT_CT depends on NF_NAT") Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/b6386f28d1ba34721795fb776a91cbdabb203447.1668807183.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22net: sparx5: fix error handling in sparx5_port_open()Liu Jian1-2/+12
If phylink_of_phy_connect() fails, the port should be disabled. If sparx5_serdes_set()/phy_power_on() fails, the port should be disabled and the phylink should be stopped and disconnected. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Liu Jian <liujian56@huawei.com> Tested-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com> Link: https://lore.kernel.org/r/20221117125918.203997-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22sfc: fix potential memleak in __ef100_hard_start_xmit()Zhang Changzhong1-0/+1
The __ef100_hard_start_xmit() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/1668671409-10909-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22net: wwan: iosm: use ACPI_FREE() but not kfree() in ipc_pcie_read_bios_cfg()Wang ShaoBo1-1/+1
acpi_evaluate_dsm() should be coupled with ACPI_FREE() to free the ACPI memory, because we need to track the allocation of acpi_object when ACPI_DBG_TRACK_ALLOCATIONS enabled, so use ACPI_FREE() instead of kfree(). Fixes: d38a648d2d6c ("net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20221118062447.2324881-1-bobo.shaobowang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-11-22ice: fix handling of burst Tx timestampsJacob Keller2-16/+16
Commit 1229b33973c7 ("ice: Add low latency Tx timestamp read") refactored PTP timestamping logic to use a threaded IRQ instead of a separate kthread. This implementation introduced ice_misc_intr_thread_fn and redefined the ice_ptp_process_ts function interface to return a value of whether or not the timestamp processing was complete. ice_misc_intr_thread_fn would take the return value from ice_ptp_process_ts and convert it into either IRQ_HANDLED if there were no more timestamps to be processed, or IRQ_WAKE_THREAD if the thread should continue processing. This is not correct, as the kernel does not re-schedule threaded IRQ functions automatically. IRQ_WAKE_THREAD can only be used by the main IRQ function. This results in the ice_ptp_process_ts function (and in turn the ice_ptp_tx_tstamp function) from only being called exactly once per interrupt. If an application sends a burst of Tx timestamps without waiting for a response, the interrupt will trigger for the first timestamp. However, later timestamps may not have arrived yet. This can result in dropped or discarded timestamps. Worse, on E822 hardware this results in the interrupt logic getting stuck such that no future interrupts will be triggered. The result is complete loss of Tx timestamp functionality. Fix this by modifying the ice_misc_intr_thread_fn to perform its own polling of the ice_ptp_process_ts function. We sleep for a few microseconds between attempts to avoid wasting significant CPU time. The value was chosen to allow time for the Tx timestamps to complete without wasting so much time that we overrun application wait budgets in the worst case. The ice_ptp_process_ts function also currently returns false in the event that the Tx tracker is not initialized. This would result in the threaded IRQ handler never exiting if it gets started while the tracker is not initialized. Fix the function to appropriately return true when the tracker is not initialized. Note that this will not reproduce with default ptp4l behavior, as the program always synchronously waits for a timestamp response before sending another timestamp request. Reported-by: Siddaraju DH <siddaraju.dh@intel.com> Fixes: 1229b33973c7 ("ice: Add low latency Tx timestamp read") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20221118222729.1565317-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22tipc: check skb_linearize() return value in tipc_disc_rcv()YueHaibing1-1/+4
If skb_linearize() fails in tipc_disc_rcv(), we need to free the skb instead of handle it. Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Link: https://lore.kernel.org/r/20221119072832.7896-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22Merge branch '40GbE' of ↵Jakub Kicinski2-19/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-11-18 (iavf) Ivan Vecera resolves issues related to reset by adding back call to netif_tx_stop_all_queues() and adding calls to dev_close() to ensure device is properly closed during reset. Stefan Assmann removes waiting for setting of MAC address as this breaks ARP. Slawomir adds setting of __IAVF_IN_REMOVE_TASK bit to prevent deadlock between remove and shutdown. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix race condition between iavf_shutdown and iavf_remove iavf: remove INITIAL_MAC_SET to allow gARP to work properly iavf: Do not restart Tx queues after reset task failure iavf: Fix a crash during reset task ==================== Link: https://lore.kernel.org/r/20221118222439.1565245-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22Merge branch 'tipc-fix-two-race-issues-in-tipc_conn_alloc'Jakub Kicinski1-9/+11
Xin Long says: ==================== tipc: fix two race issues in tipc_conn_alloc The race exists beteen tipc_topsrv_accept() and tipc_conn_close(), one is allocating the con while the other is freeing it and there is no proper lock protecting it. Therefore, a null-pointer-defer and a use-after-free may be triggered, see details on each patch. ==================== Link: https://lore.kernel.org/r/cover.1668807842.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22tipc: add an extra conn_get in tipc_conn_allocXin Long1-3/+6
One extra conn_get() is needed in tipc_conn_alloc(), as after tipc_conn_alloc() is called, tipc_conn_close() may free this con before deferencing it in tipc_topsrv_accept(): tipc_conn_alloc(); newsk = newsock->sk; <---- tipc_conn_close(); write_lock_bh(&sk->sk_callback_lock); newsk->sk_data_ready = tipc_conn_data_ready; Then an uaf issue can be triggered: BUG: KASAN: use-after-free in tipc_topsrv_accept+0x1e7/0x370 [tipc] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x178/0x4b0 kasan_report+0x8c/0x100 kasan_check_range+0x179/0x1e0 tipc_topsrv_accept+0x1e7/0x370 [tipc] process_one_work+0x6a3/0x1030 worker_thread+0x8a/0xdf0 This patch fixes it by holding it in tipc_conn_alloc(), then after all accessing in tipc_topsrv_accept() releasing it. Note when does this in tipc_topsrv_kern_subscr(), as tipc_conn_rcv_sub() returns 0 or -1 only, we don't need to check for "> 0". Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22tipc: set con sock in tipc_conn_allocXin Long1-6/+5
A crash was reported by Wei Chen: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:tipc_conn_close+0x12/0x100 Call Trace: tipc_topsrv_exit_net+0x139/0x320 ops_exit_list.isra.9+0x49/0x80 cleanup_net+0x31a/0x540 process_one_work+0x3fa/0x9f0 worker_thread+0x42/0x5c0 It was caused by !con->sock in tipc_conn_close(). In tipc_topsrv_accept(), con is allocated in conn_idr then its sock is set: con = tipc_conn_alloc(); ... <----[1] con->sock = newsock; If tipc_conn_close() is called in anytime of [1], the null-pointer-def is triggered by con->sock->sk due to con->sock is not yet set. This patch fixes it by moving the con->sock setting to tipc_conn_alloc() under s->idr_lock. So that con->sock can never be NULL when getting the con from s->conn_idr. It will be also safer to move con->server and flag CF_CONNECTED setting under s->idr_lock, as they should all be set before tipc_conn_alloc() is called. Fixes: c5fa7b3cf3cb ("tipc: introduce new TIPC server infrastructure") Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-22net: phy: at803x: fix error return code in at803x_probe()Wei Yongjun1-1/+3
Fix to return a negative error code from the ccr read error handling case instead of 0, as done elsewhere in this function. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221118103635.254256-1-weiyongjun@huaweicloud.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21octeontx2-af: cn10k: mcs: Fix copy and paste bug in mcs_bbe_intr_handler()Dan Carpenter1-1/+1
This code accidentally uses the RX macro twice instead of the RX and TX. Fixes: 6c635f78c474 ("octeontx2-af: cn10k: mcs: Handle MCS block interrupts") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21ipv4/fib: Replace zero-length array with DECLARE_FLEX_ARRAY() helperKees Cook1-1/+1
Zero-length arrays are deprecated[1] and are being replaced with flexible array members in support of the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3. Replace zero-length array with flexible-array member in struct key_vector. This results in no differences in binary output. [1] https://github.com/KSPP/linux/issues/78 Cc: Jakub Kicinski <kuba@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Ahern <dsahern@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21selftests/net: Find nettest in current directoryDaniel Díaz2-8/+13
The `nettest` binary, built from `selftests/net/nettest.c`, was expected to be found in the path during test execution of `fcnal-test.sh` and `pmtu.sh`, leading to tests getting skipped when the binary is not installed in the system, as can be seen in these logs found in the wild [1]: # TEST: vti4: PMTU exceptions [SKIP] [ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm6udp not supported # TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP] [ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm4udp not supported The `unicast_extensions.sh` tests also rely on `nettest`, but it runs fine there because it looks for the binary in the current working directory [2]: The same mechanism that works for the Unicast extensions tests is here copied over to the PMTU and functional tests. [1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221 [2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958 Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller12-41/+49
Pablo Neira Ayuso says: ==================== The following patchset contains late Netfilter fixes for net: 1) Use READ_ONCE()/WRITE_ONCE() to update ct->mark, from Daniel Xu. Not reported by syzbot, but I presume KASAN would trigger post a splat on this. This is a rather old issue, predating git history. 2) Do not set up extensions for set element with end interval flag set on. This leads to bogusly skipping this elements as expired when listing the set/map to userspace as well as increasing memory consumpton when stateful expressions are used. This issue has been present since 4.18, when timeout support for rbtree set was added. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21net: microchip: sparx5: Fix return value in sparx5_tc_setup_qdisc_ets()Lu Wei1-5/+2
Function sparx5_tc_setup_qdisc_ets() always returns negative value because it return -EOPNOTSUPP in the end. This patch returns the rersult of sparx5_tc_ets_add() and sparx5_tc_ets_del() directly. Fixes: 211225428d65 ("net: microchip: sparx5: add support for offloading ets qdisc") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21Merge branch 'nfc-leaks'David S. Miller3-3/+10
Shang XiaoJing says: ==================== nfc: Fix potential memory leak of skb There are still somewhere maybe leak the skb, fix the memleaks by adding fail path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send()Shang XiaoJing1-0/+1
s3fwrn5_nci_send() won't free the skb when it failed for the check before s3fwrn5_write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: nxp-nci: Fix potential memory leak in nxp_nci_send()Shang XiaoJing1-2/+6
nxp_nci_send() won't free the skb when it failed for the check before write(). As the result, the skb will memleak. Free the skb when the check failed. Fixes: dece45855a8b ("NFC: nxp-nci: Add support for NXP NCI chips") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-21nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send()Shang XiaoJing1-1/+3
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() won't free the skb when it failed for the test_bit(). Free the skb when test_bit() failed. Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Suggested-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-19macsec: Fix invalid error code setYueHaibing1-1/+0
'ret' is defined twice in macsec_changelink(), when it is set in macsec_is_offloaded case, it will be invalid before return. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20221118011249.48112-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19bonding: fix ICMPv6 header handling when receiving IPv6 messagesHangbin Liu1-5/+12
Currently, we get icmp6hdr via function icmp6_hdr(), which needs the skb transport header to be set first. But there is no rule to ask driver set transport header before netif_receive_skb() and bond_handle_frame(). So we will not able to get correct icmp6hdr on some drivers. Fix this by using skb_header_pointer to get the IPv6 and ICMPV6 headers. Reported-by: Liang Li <liali@redhat.com> Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20221118034353.1736727-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19Merge branch 'nfp-fixes-for-v6-1'Jakub Kicinski2-1/+4
Simon Horman says: ==================== nfp: fixes for v6.1 - Ensure that information displayed by "devlink port show" reflects the number of lanes available to be split. - Avoid NULL dereference in ethtool test code. ==================== Link: https://lore.kernel.org/r/20221117153744.688595-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19nfp: add port from netdev validation for EEPROM accessJaco Coetzee1-0/+3
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <jaco.coetzee@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19nfp: fill splittable of devlink_port_attrs correctlyDiana Wang1-1/+1
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by: Diana Wang <na.wang@corigine.com> Reviewed-by: Louis Peens <louis.peens@corigine.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19net: pch_gbe: fix pci device refcount leak while module exitingYang Yingliang1-1/+4
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In pch_gbe_probe(), pci_get_domain_bus_and_slot() is called, so in error path in probe() and remove() function, pci_dev_put() should be called to avoid refcount leak. Compile tested only. Fixes: 1a0bdadb4e36 ("net/pch_gbe: supports eg20t ptp clock") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117135148.301014-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19octeontx2-af: debugsfs: fix pci device refcount leakYang Yingliang1-0/+3
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from rvu_dbg_rvu_pf_cgx_map_display() or cgx_print_dmac_flt(), pci_dev_put() is called to avoid refcount leak. Fixes: dbc52debf95f ("octeontx2-af: Debugfs support for DMAC filters") Fixes: e2fb37303865 ("octeontx2-af: Display CGX, NIX and PF map in debugfs.") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221117124658.162409-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19net/qla3xxx: fix potential memleak in ql3xxx_send()Zhang Changzhong1-0/+1
The ql3xxx_send() returns NETDEV_TX_OK without freeing skb in error handling case, add dev_kfree_skb_any() to fix it. Fixes: bd36b0ac5d06 ("qla3xxx: Add support for Qlogic 4032 chip.") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1668675039-21138-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19net: mvpp2: fix possible invalid pointer dereferenceHui Tang1-2/+6
It will cause invalid pointer dereference to priv->cm3_base behind, if PTR_ERR(priv->cm3_base) in mvpp2_get_sram(). Fixes: e54ad1e01c00 ("net: mvpp2: add CM3 SRAM memory map") Signed-off-by: Hui Tang <tanghui20@huawei.com> Link: https://lore.kernel.org/r/20221117084032.101144-1-tanghui20@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19net/mlx4: Check retval of mlx4_bitmap_initPeter Kosyh1-1/+2
If mlx4_bitmap_init fails, mlx4_bitmap_alloc_range will dereference the NULL pointer (bitmap->table). Make sure, that mlx4_bitmap_alloc_range called in no error case. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d57febe1a478 ("net/mlx4: Add A0 hybrid steering") Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Peter Kosyh <pkosyh@yandex.ru> Link: https://lore.kernel.org/r/20221117152806.278072-1-pkosyh@yandex.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19net: ethernet: mtk_eth_soc: fix error handling in mtk_open()Liu Jian1-1/+3
If mtk_start_dma() fails, invoke phylink_disconnect_phy() to perform cleanup. phylink_disconnect_phy() contains the put_device action. If phylink_disconnect_phy is not performed, the Kref of netdev will leak. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20221117111356.161547-1-liujian56@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-19iavf: Fix race condition between iavf_shutdown and iavf_removeSlawomir Laba1-9/+7
Fix a deadlock introduced by commit 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") due to race condition between iavf_shutdown and iavf_remove, where iavf_remove stucks forever in while loop since iavf_shutdown already set __IAVF_REMOVE adapter state. Fix this by checking if the __IAVF_IN_REMOVE_TASK has already been set and return if so. Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-19iavf: remove INITIAL_MAC_SET to allow gARP to work properlyStefan Assmann2-9/+0
IAVF_FLAG_INITIAL_MAC_SET prevents waiting on iavf_is_mac_set_handled() the first time the MAC is set. This breaks gratuitous ARP because the MAC address has not been updated yet when the gARP packet is sent out. Current behaviour: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: ee:04:19:14:ec:ea $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:23:41.676611 ee:04:19:14:ec:ea > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 With IAVF_FLAG_INITIAL_MAC_SET removed: $ echo 1 > /sys/class/net/ens4f0/device/sriov_numvfs iavf 0000:88:02.0: MAC address: 3e:8a:16:a2:37:6d $ ip addr add 192.168.1.1/24 dev ens4f0v0 $ ip link set dev ens4f0v0 up $ echo 1 > /proc/sys/net/ipv4/conf/ens4f0v0/arp_notify $ ip link set ens4f0v0 addr 00:11:22:33:44:55 07:28:01.836608 00:11:22:33:44:55 > ff:ff:ff:ff:ff:ff, ethertype ARP (0x0806), length 42: Request who-has 192.168.1.1 tell 192.168.1.1, length 28 Fixes: 35a2443d0910 ("iavf: Add waiting for response from PF in set mac") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-19iavf: Do not restart Tx queues after reset task failureIvan Vecera1-1/+15
After commit aa626da947e9 ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-19iavf: Fix a crash during reset taskIvan Vecera1-0/+1
Recent commit aa626da947e9 ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da947e9 ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-18netfilter: nf_tables: do not set up extensions for end intervalPablo Neira Ayuso1-2/+4
Elements with an end interval flag set on do not store extensions. The global set definition is currently setting on the timeout and stateful expression for end interval elements. This leads to skipping end interval elements from the set->ops->walk() path as the expired check bogusly reports true. Moreover, do not set up stateful expressions for elements with end interval flag set on since this is never used. Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition") Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18netfilter: conntrack: Fix data-races around ct markDaniel Xu11-39/+45
nf_conn:mark can be read from and written to in parallel. Use READ_ONCE()/WRITE_ONCE() for reads and writes to prevent unwanted compiler optimizations. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-18net: pch_gbe: fix potential memleak in pch_gbe_tx_queue()Wang Hai1-0/+1
In pch_gbe_xmit_frame(), NETDEV_TX_OK will be returned whether pch_gbe_tx_queue() sends data successfully or not, so pch_gbe_tx_queue() needs to free skb before returning. But pch_gbe_tx_queue() returns without freeing skb in case of dma_map_single() fails. Add dev_kfree_skb_any() to fix it. Fixes: 77555ee72282 ("net: Add Gigabit Ethernet driver of Topcliff PCH") Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18nfc/nci: fix race with opening and closingLin Ma1-1/+1
Previously we leverage NCI_UNREG and the lock inside nci_close_device to prevent the race condition between opening a device and closing a device. However, it still has problem because a failed opening command will erase the NCI_UNREG flag and allow another opening command to bypass the status checking. This fix corrects that by making sure the NCI_UNREG is held. Reported-by: syzbot+43475bf3cfbd6e41f5b7@syzkaller.appspotmail.com Fixes: 48b71a9e66c2 ("NFC: add NCI_UNREG flag to eliminate the race") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18net: dsa: sja1105: disallow C45 transactions on the BASE-TX MDIO busVladimir Oltean1-0/+6
You'd think people know that the internal 100BASE-TX PHY on the SJA1110 responds only to clause 22 MDIO transactions, but they don't :) When a clause 45 transaction is attempted, sja1105_base_tx_mdio_read() and sja1105_base_tx_mdio_write() don't expect "reg" to contain bit 30 set (MII_ADDR_C45) and pack this value into the SPI transaction buffer. But the field in the SPI buffer has a width smaller than 30 bits, so we see this confusing message from the packing() API rather than a proper rejection of C45 transactions: Call trace: dump_stack+0x1c/0x38 sja1105_pack+0xbc/0xc0 [sja1105] sja1105_xfer+0x114/0x2b0 [sja1105] sja1105_xfer_u32+0x44/0xf4 [sja1105] sja1105_base_tx_mdio_read+0x44/0x7c [sja1105] mdiobus_read+0x44/0x80 get_phy_c45_ids+0x70/0x234 get_phy_device+0x68/0x15c fwnode_mdiobus_register_phy+0x74/0x240 of_mdiobus_register+0x13c/0x380 sja1105_mdiobus_register+0x368/0x490 [sja1105] sja1105_setup+0x94/0x119c [sja1105] Cannot store 401d2405 inside bits 24-4 (would truncate) Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-18rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]David Howells2-15/+24
After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: zdi-disclosures@trendmicro.com cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 02:58:55 +0300