| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add Intel Lunar Lake-M PCI ID to the driver list of supported devices.
This is the same controller found in previous generations.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://msgid.link/r/20240212082027.2462849-1-mika.westerberg@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
MCSPI controller have few limitations regarding the transaction
size when the FIFO buffer is enabled and the WCNT feature is used
to find the end of word, in this case if WCNT is not a multiple of
the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
generated correctly. In addition to this limitation, few other unknown
sequence of events that causes the FIFO empty status to not reflect the
exact status were found when FIFO is being used without DMA enabled
during extended testing in AM65x platform. Till the exact root cause
is found and fixed, revert the FIFO support without DMA.
See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
for further details: http://www.ti.com/lit/pdf/spruil1
This reverts commit 75223bbea840e ("spi: omap2-mcspi: Add FIFO support
without DMA")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://msgid.link/r/20240212120049.438495-1-vaishnav.a@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect,
but the used jack connector outputs an inverted jack-detect signal.
Add a DMI quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The DMI strings used for the LattePanda board DMI quirks are very generic.
Using the dmidecode database from https://linux-hardware.org/ shows
that the chosen DMI strings also match the following 2 laptops
which also have a rt5645 codec:
Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04
Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934
All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS
version DMI strings:
DF-BI-7-S70CR100-*
DF-BI-7-S70CR110-*
DF-BI-7-S70CR200-*
LP-BS-7-S70CR700-*
See e.g. https://linux-hardware.org/?computer=D98250A817C0
Add a partial (non exact) DMI match on this string to make the LattePanda
board DMI match more precise to avoid false-positive matches.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface. Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skip_power_up is used in etm4_init_arch_data when set lpoverride. So
need to set the value of it before calling using it.
Fixes: 5214b563588e ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com
|
|
Omit to create scheduler instances when using the legacy uAPI. When
using the legacy NOUVEAU_GEM_PUSHBUF ioctl no scheduler instance is
required, hence omit creating scheduler instances in
nouveau_abi16_ioctl_channel_alloc().
Tested-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-2-dakr@redhat.com
|
|
nouveau_abi16_ioctl_channel_alloc() and nouveau_cli_init() simply call
their corresponding *_fini() counterpart. This can lead to
nouveau_sched_fini() being called without struct nouveau_sched ever
being initialized in the first place.
Instead of embedding struct nouveau_sched into struct nouveau_cli and
struct nouveau_chan_abi16, allocate struct nouveau_sched separately,
such that we can check for the corresponding pointer to be NULL in the
particular *_fini() functions.
It makes sense to allocate struct nouveau_sched separately anyway, since
in a subsequent commit we can also avoid to allocate a struct
nouveau_sched in nouveau_abi16_ioctl_channel_alloc() at all, if the
VM_BIND uAPI has been disabled due to the legacy uAPI being used.
Fixes: 5f03a507b29e ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Reported-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Closes: https://lore.kernel.org/nouveau/20240131213917.1545604-1-ttabi@nvidia.com/
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-1-dakr@redhat.com
|
|
Add the nodes for CMB subunit MSR(mux select register) support.
CMB MSRs(mux select registers) is to separate mux, arbitration,
interleaving,data packing control from stream filtering control.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-11-git-send-email-quic_taozha@quicinc.com
|
|
Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register)
for TPDM. It specifies the number of CMB MSR registers supported by
the TDPM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-10-git-send-email-quic_taozha@quicinc.com
|
|
CMB_TIER register is CMB subunit timestamp insertion enable register.
Bit 0 is PATT_TSENAB bit. Set this bit to 1 to request a timestamp
following a CMB interface pattern match. Bit 1 is XTRIG_TSENAB bit.
Set this bit to 1 to request a timestamp following a CMB CTI timestamp
request. Bit 2 is TS_ALL bit. Set this bit to 1 to request timestamp
for all packets.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-9-git-send-email-quic_taozha@quicinc.com
|
|
Timestamps are requested if the monitor’s CMB data set unit input
data matches the value in the Monitor CMB timestamp pattern and mask
registers (M_CMB_TPR and M_CMB_TPMR) when CMB timestamp enabled
via the timestamp insertion enable register bit(CMB_TIER.PATT_TSENAB).
The pattern match trigger output is achieved via setting values into
the CMB trigger pattern and mask registers (CMB_XPR and CMB_XPMR).
After configuring a pattern through these registers, the TPDM subunit
will assert an output trigger every time it receives new input data
that matches the configured pattern value. Values in a given bit
number of the mask register correspond to the same bit number in
the corresponding pattern register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-8-git-send-email-quic_taozha@quicinc.com
|
|
TPDM CMB subunits support two forms of CMB data set element creation:
continuous and trace-on-change collection mode. Continuous change
creates CMB data set elements on every CMBCLK edge. Trace-on-change
creates CMB data set elements only when a new data set element differs
in value from the previous element in a CMB data set. Set CMB_CR.MODE
to 0 for continuous CMB collection mode. Set CMB_CR.MODE to 1 for
trace-on-change CMB collection mode.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-7-git-send-email-quic_taozha@quicinc.com
|
|
Read the CMB element size from the device tree. Set the register
bit that controls the CMB element size of the corresponding port.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-6-git-send-email-quic_taozha@quicinc.com
|
|
CMB (continuous multi-bit) is one of TPDM's dataset type. CMB subunit
can be enabled for data collection by writing 1 to the first bit of
CMB_CR register. This change is to add enable/disable function for
CMB dataset by writing CMB_CR register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-5-git-send-email-quic_taozha@quicinc.com
|
|
Add property "qcom,cmb-elem-bits" to support CMB(Continuous
Multi-Bit) element for TPDM. The associated aggregator will read
this size before it is enabled. CMB element size currently only
supports 8-bit, 32-bit and 64-bit. Because the existing example
tpdm "tpdm@684c000" which only supports dsb sub-unit, I introduce
a new example "tpdm@6c29000" to describe the usage of this new
property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-4-git-send-email-quic_taozha@quicinc.com
|
|
Since the function tpdm_has_dsb_dataset will be called by TPDA
driver in subsequent patches, it is moved to the header file.
And move this judgement form the function __tpdm_{enable/disable}
to the beginning of the function tpdm_{enable/disable}_dsb.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-3-git-send-email-quic_taozha@quicinc.com
|
|
Replace spin lock/unlock to avoid forgetting to unlock when the
function exits. And refine methods for handling various conditions.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-2-git-send-email-quic_taozha@quicinc.com
|
|
Now that mode is in struct coresight_device, sets can be wrapped. This
also allows us to add a sanity check that there have been no concurrent
modifications of mode. Currently all usages of local_set() were inside
the device's spin locks so this new warning shouldn't be triggered.
coresight_take_mode() could maybe have been used in place of adding
the warning, but there may be use cases which set the mode to the same
mode which are valid but would fail in coresight_take_mode() because
it requires the device to only be in the disabled state.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-13-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device accesses can be wrapped.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-12-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that mode is in struct coresight_device, this pattern can be wrapped
in a helper.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-11-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
These could potentially become wrong silently if the enum is changed,
so explicitly initialize them.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-10-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
These are a bit annoying to keep up to date when the function signatures
change. But if CONFIG_CORESIGHT isn't enabled, then they're not used
anyway so just delete them.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-9-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Refcnt is only ever accessed from either inside the coresight_mutex, or
the device's spinlock, making the atomic type and atomic_dec_return()
calls confusing and unnecessary. The only point of synchronisation
outside of these two types of locks is already done with a compare and
swap on 'mode', which a comment has been added for.
There was one instance of refcnt being used outside of a lock in TPIU,
but that can easily be fixed by making it the same as all the other
devices and adding a spinlock. Potentially in the future all the
refcounting and locking can be moved up into the core code, and all the
mostly duplicate code from the individual devices can be removed.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-8-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
At the moment the core file contains both sysfs functionality and
core functionality, while the Perf mode is in a separate file in
coresight-etm-perf.c
Many of the functions have ambiguous names like
coresight_enable_source() which actually only work in relation to the
sysfs mode. To avoid further confusion, move everything that isn't core
functionality into the sysfs file and append _sysfs to the ambiguous
functions.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-7-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
'enable', which probably should have been 'enabled', is only ever read
in the core code in relation to controlling sources, and specifically
only sources in sysfs mode. Confusingly it's not labelled as such and
relying on it can be a source of bugs like the one fixed by
commit 078dbba3f0c9 ("coresight: Fix crash when Perf and sysfs modes are
used concurrently").
Most importantly, it can only be used when the coresight_mutex is held
which is only done when enabling and disabling paths in sysfs mode, and
not Perf mode. So to prevent its usage spreading and leaking out to
other devices, remove it.
It's use is equivalent to checking if the mode is currently sysfs, as
due to the coresight_mutex lock, mode == CS_MODE_SYSFS can only become
true or untrue when that lock is held, and when mode == CS_MODE_SYSFS
the device is both enabled and in sysfs mode.
The one place it was used outside of the core code is in TPDA, but that
pattern is more appropriately represented using refcounts inside the
device's own spinlock.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-6-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Most devices use mode, so move the mode definition out of the individual
devices and up to the Coresight device. This will allow the core code to
also know the mode which will be useful in a later commit.
This also fixes the inconsistency of the documentation of the mode field
on the individual device types. For example ETB10 had "this ETB is being
used".
Two devices didn't require an atomic mode type, so these usages have
been converted to atomic_get() and atomic_set() only to make it compile,
but the documentation of the field in struct coresight_device explains
this type of usage.
In the future, manipulation of the mode could be completely moved out of
the individual devices and into the core code because it's almost all
duplicate code, and this change is a step towards that.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-5-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
The check for the existence of callbacks before using them implies that
this happens and is supported. There are no devices without
enable/disable callbacks, and it wouldn't be possible to add a new
working device without adding them either, so just remove them.
Furthermore, there are more callbacks than just enable and disable that
are already used unguarded in other places.
The comment about new session compatibility doesn't seem to match up to
the line of code that it's on so remove it. I think it's alluding to the
fact that sinks will check if they were already enabled via sysfs or
Perf and fail the enable. But there are more detailed comments at those
places, and this one isn't very useful.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-4-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Activated has the specific meaning of a sink that's selected for use by
the user via sysfs. But comments in some code that's shared by Perf use
the same word, so in those cases change them to just say "selected"
instead. With selected implying either via Perf or "activated" via
sysfs.
coresight_get_enabled_sink() doesn't actually get an enabled sink, it
only gets an activated one, so change that too.
And change the activated variable name to include "sysfs" so it can't
be confused as a general status.
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-3-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
The linked commit reverts the change that accidentally used some sysfs
enable/disable functions from Perf which broke the refcounting, but it
also removes the fact that the sysfs disable function disabled the
helpers.
Add a new wrapper function that does both which is used by both Perf and
sysfs, and label the sysfs disable function appropriately. The naming of
all of the functions will be tidied up later to avoid this happening
again.
Fixes: 287e82cf69aa ("coresight: Fix crash when Perf and sysfs modes are used concurrently")
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240129154050.569566-2-james.clark@arm.com
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the coresight_bustype variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/2024010531-tinfoil-avert-4a57@gregkh
|
|
Similarly to drivers/gpu/drm/amd/amdgpu/Makefile and
fs/btrfs/Makefile, copy the current set of W=1 warnings from
Makefile.extrawarn to the coresight makefile to make them default.
Unfortunately there is no easy way to do this without copying.
In addition to the default set of warnings, add -Wno-sign-compare to
disable that warning. That's because Makefile.extrawarn does some extra
steps to disable some -Wextra warnings unless W=2 or W=3 are used.
That's the only one that's needed for Coresight, so disable it.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-5-james.clark@arm.com
|
|
Including the header with the declarations fixes the following warning
with a C=1 build:
coresight-cfg-afdo.c:102:27: warning: symbol 'strobe_etm4x' was not declared. Should it be static?
coresight-cfg-afdo.c:141:26: warning: symbol 'afdo_etm4x' was not declared. Should it be static?
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-4-james.clark@arm.com
|
|
The missing * in the comment block causes the following warning, so fix
it:
hwtracing/coresight/coresight-etm3x-core.c:118: warning: bad line:
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-3-james.clark@arm.com
|
|
These warnings would be hit with the following W=1 build change so
initialize all structs properly.
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231123120459.287578-2-james.clark@arm.com
|
|
Matthieu Baerts says:
====================
mptcp: locking cleanup & misc. fixes
Patches 1-4 are fixes for issues found by Paolo while working on adding
TCP_NOTSENT_LOWAT support. The latter will need to track more states
under the msk data lock. Since the locking msk locking schema is already
quite complex, do a long awaited clean-up step by moving several
confusing lockless initialization under the relevant locks. Note that it
is unlikely a real race could happen even prior to such patches as the
MPTCP-level state machine implicitly ensures proper serialization of the
write accesses, even lacking explicit lock. But still, simplification is
welcome and this will help for the maintenance. This can be backported
up to v5.6.
Patch 5 is a fix for the userspace PM, not to add new local address
entries if the address is already in the list. This behaviour can be
seen since v5.19.
Patch 6 fixes an issue when Fastopen is used. The issue can happen since
v6.2. A previous fix has already been applied, but not taking care of
all cases according to syzbot.
Patch 7 updates Geliang's email address in the MAINTAINERS file.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update my email-address in MAINTAINERS and .mailmap entries to my
kernel.org account.
Suggested-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fastopen and PM-trigger subflow shutdown can race, as reported by
syzkaller.
In my first attempt to close such race, I missed the fact that
the subflow status can change again before the subflow_state_change
callback is invoked.
Address the issue additionally copying with all the states directly
reachable from TCP_FIN_WAIT1.
Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support")
Fixes: 4fd19a307016 ("mptcp: fix inconsistent state on fastopen race")
Cc: stable@vger.kernel.org
Reported-by: syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before adding a new entry in mptcp_userspace_pm_get_local_id(), it's
better to check whether this address is already in userspace pm local
address list. If it's in the list, no need to add a new entry, just
return it's address ID and use this address.
Fixes: 8b20137012d9 ("mptcp: read attributes of addr entries managed by userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most MPTCP-level related fields are under the mptcp data lock
protection, but are written one-off without such lock at MPC
complete time, both for the client and the server
Leverage the mptcp_propagate_state() infrastructure to move such
initialization under the proper lock client-wise.
The server side critical init steps are done by
mptcp_subflow_fully_established(): ensure the caller properly held the
relevant lock, and avoid acquiring the same lock in the nested scopes.
There are no real potential races, as write access to such fields
is implicitly serialized by the MPTCP state machine; the primary
goal is consistency.
Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'msk->write_seq' and 'msk->snd_nxt' are always updated under
the msk socket lock, except at MPC handshake completiont time.
Builds-up on the previous commit to move such init under the relevant
lock.
There are no known problems caused by the potential race, the
primary goal is consistency.
Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mptcp_rcv_space_init() is supposed to happen under the msk socket
lock, but active msk socket does that without such protection.
Leverage the existing mptcp_propagate_state() helper to that extent.
We need to ensure mptcp_rcv_space_init will happen before
mptcp_rcv_space_adjust(), and the release_cb does not assure that:
explicitly check for such condition.
While at it, move the wnd_end initialization out of mptcp_rcv_space_init(),
it never belonged there.
Note that the race does not produce ill effect in practice, but
change allows cleaning-up and defying better the locking model.
Fixes: a6b118febbab ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Such field is there to avoid acquiring the data lock in a few spots,
but it adds complexity to the already non trivial locking schema.
All the relevant call sites (mptcp-level re-injection, set socket
options), are slow-path, drop such field in favor of 'cb_flags', adding
the relevant locking.
This patch could be seen as an improvement, instead of a fix. But it
simplifies the next patch. The 'Fixes' tag has been added to help having
this series backported to stable.
Fixes: e9d09baca676 ("mptcp: avoid atomic bit manipulation when possible")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix rtla so that the following commands exit with 0 when help is invoked
rtla osnoise top -h
rtla osnoise hist -h
rtla timerlat top -h
rtla timerlat hist -h
Link: https://lore.kernel.org/linux-trace-devel/20240203001607.69703-1-jkacur@redhat.com
Cc: stable@vger.kernel.org
Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode")
Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Since the sched_priority for SCHED_OTHER is always 0, it makes no
sence to set it.
Setting nice for SCHED_OTHER seems more meaningful.
Link: https://lkml.kernel.org/r/20240207065142.1753909-1-limingming3@lixiang.com
Cc: stable@vger.kernel.org
Fixes: b1696371d865 ("rtla: Helper functions for rtla")
Signed-off-by: limingming3 <limingming3@lixiang.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
|
|
Eric Dumazet says:
====================
net: more three misplaced fields
We recently reorganized some structures for better data locality
in networking fast paths.
This series moves three fields that were not correctly classified.
There probably more to come.
Reference : https://lwn.net/Articles/951321/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->lstats is notably used from loopback ndo_start_xmit()
and other virtual drivers.
Per cpu stats updates are dirtying per-cpu data,
but the pointer itself is read-only.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths.
Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths.
Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Limit the link rate to HBR3 or below (<=8.1Gbps) in SST mode.
UHBR (10Gbps+) link rates require 128b/132b channel encoding
which we have not yet hooked up into the SST/no-sideband codepaths.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208154552.14545-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 6061811d72e14f41f71b6a025510920b187bfcca)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
