| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Important fixes to several tests and documentation clarification on
running mainline kselftest on stable releases. A few notable fixes:
- fix kselftest run hang due to child processes that haven't been
terminated. Fix signals all child processes
- fix false pass/fail results from vdso_test_abi, openat2, mincore
- build failures when using -j (multiple jobs) option
- exec test build failure due to incorrect build rule for a run-time
created "pipe"
- zram test fixes related to interaction with zram-generator to make
sure zram test to coordinate deleted with zram-generator
- zram test compression ratio calculation fix and skipping
max_comp_streams.
- increasing rtc test timeout
- cpufreq test to write test results to stdout which will necessary
on automated test systems"
* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: Fix vdso_test_abi return status
selftests: skip mincore.check_file_mmap when fs lacks needed support
selftests: openat2: Skip testcases that fail with EOPNOTSUPP
selftests: openat2: Add missing dependency in Makefile
selftests: openat2: Print also errno in failure messages
selftests: futex: Use variable MAKE instead of make
selftests/exec: Remove pipe from TEST_GEN_FILES
selftests/zram: Adapt the situation that /dev/zram0 is being used
selftests/zram01.sh: Fix compression ratio calculation
selftests/zram: Skip max_comp_streams interface on newer kernel
docs/kselftest: clarify running mainline tests on stables
kselftest: signal all child processes
selftests: cpufreq: Write test output to stdout as well
selftests: rtc: Increase test timeout so that all tests run
|
|
The ice driver provides QoS information to auxiliary drivers
through the exported function ice_get_qos_params. This function
doesn't currently support L3 DSCP QoS.
Add the necessary defines, structure elements and code to support
DSCP QoS through the IIDC functions.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().
This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.
Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.
Add logic to ensure the "seconds" and "nanoseconds" values are consistent.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2022-02-03
We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).
The main changes are:
1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
flag which otherwise trips over KASAN, from Hou Tao.
2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
rename, from Alexei Starovoitov.
3) Fix a possible race in inc_misses_counter() when IRQ would trigger
during counter update, from He Fengqing.
4) Fix tooling infra for cross-building with clang upon probing whether
gcc provides the standard libraries, from Jean-Philippe Brucker.
5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.
6) Drop unneeded and outdated lirc.h header copy from tooling infra as
BPF does not require it anymore, from Sean Young.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
tools: Ignore errors from `which' when searching a GCC toolchain
tools headers UAPI: remove stale lirc.h
bpf: Fix possible race in inc_misses_counter
bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================
Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There was a race condition in access to hw->aq.asq_last_status
while adding and deleting MAC/VLAN filters causing
incorrect error status to be printed as ERROR OK instead of
the correct error.
Change calls to i40e_aq_add_macvlan in i40e_aqc_add_filters
and i40e_aq_remove_macvlan in i40e_aqc_del_filters
to _v2 versions that return Admin Queue status on the stack
to avoid race conditions in access to hw->aq.asq_last_status.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ASQ send command functions are returning only i40e status codes
yet some calling functions also need Admin Queue status
that is stored in hw->aq.asq_last_status. Since hw object
is stored on a heap it introduces a possibility for
a race condition in access to hw if calling function is not
fast enough to read hw->aq.asq_last_status before next
send ASQ command is executed.
Add new _v2 version of i40e_aq_add_macvlan that is using
new _v2 versions of ASQ send command functions and returns
the Admin Queue status on the stack.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ASQ send command functions are returning only i40e status codes
yet some calling functions also need Admin Queue status
that is stored in hw->aq.asq_last_status. Since hw object
is stored on a heap it introduces a possibility for
a race condition in access to hw if calling function is not
fast enough to read hw->aq.asq_last_status before next
send ASQ command is executed.
Add new versions of send ASQ command functions that return
Admin Queue status on the stack to avoid race conditions
in access to hw->aq.asq_last_status.
Add new _v2 version of i40e_aq_remove_macvlan that is using
new _v2 versions of ASQ send command functions and returns
the Admin Queue status on the stack.
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change functions:
- i40e_aq_add_macvlan
- i40e_aq_remove_macvlan
- i40e_aq_delete_element
- i40e_aq_add_vsi
- i40e_aq_update_vsi_params
to explicitly use i40e_asq_send_command_atomic(..., true)
instead of i40e_asq_send_command, as they use mutexes and do some
work in an atomic context.
Without this change setting vlan via netdev will fail with
call trace cased by bug "BUG: scheduling while atomic".
Signed-off-by: Witold Fijalkowski <witoldx.fijalkowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It's not used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After commit 1a557afc4dd5 ("i40e: Refactor receive routine"),
rx_stats.realloc_count is no longer being incremented, so remove it.
The debugfs string was left, but hardcoded to 0. This is intended to
prevent breaking any existing code / scripts that are parsing debugfs
for i40e.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
After loading driver hw-tc-offload is enabled by default.
Change the behaviour of driver to disable hw-tc-offload by default as
this is the expected state. Additionally since this impacts ntuple
feature state change the way of checking NETIF_F_HW_TC flag.
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to
kernel/printk/sysctl.c introduced an incorrect __user attribute to the
buffer argument. I spotted this change in [1] as well as the kernel
test robot. Revert this change to please sparse:
kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces)
kernel/printk/sysctl.c:20:51: expected void *
kernel/printk/sysctl.c:20:51: got void [noderef] __user *buffer
Fixes: faaa357a55e0 ("printk: move printk sysctl to printk/sysctl.c")
Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net [1]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
used"
This reverts commit 774a1221e862b343388347bac9b318767336b20b.
We need to finish all async code before the module init sequence is
done. In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule(). Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked. This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().
For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:
if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);
We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread. As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.
The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)
modprobe pm80xx worker
...
do_init_module()
...
pci_call_probe()
work_on_cpu(local_pci_probe)
local_pci_probe()
pm8001_pci_probe()
scsi_scan_host()
async_schedule()
worker->flags |= PF_USED_ASYNC;
...
< return from worker >
...
if (current->flags & PF_USED_ASYNC) <--- false
async_synchronize_full();
Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.
Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.
Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Eric's fix for a long standing cgroup1 permission issue where it only
checks for uid 0 instead of CAP which inadvertently allows
unprivileged userns roots to modify release_agent userhelper
- Fixes for the fallout from Waiman's recent cpuset work
* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
cgroup-v1: Require capabilities to set release_agent
cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
|
|
Alex Elder says:
====================
net: ipa: enable register retention
With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse. This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================
Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse. This is done by
issuing a QMP request to the AOSS microcontroller. A similar
request ondoes that request.
We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that. But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.
Fixes: 1aac309d3207 ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks(). It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.
Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.
Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
|
|
This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a
That commit did a refactoring that effectively combined fast and slow
gup paths (again). And that was again incorrect, for two reasons:
a) Fast gup and slow gup get reference counts on pages in different
ways and with different goals: see Linus' writeup in commit
cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call
try_get_compound_head() directly""), and
b) try_grab_compound_head() also has a specific check for
"FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
can fall back to slow gup. This resulted in new failures, as
recently report by Will McVicker [1].
But (a) has problems too, even though they may not have been reported
yet. So just revert this.
Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1]
Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix missed change for PTR->PTR_WD conversion
- kernel-doc fixes
* tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: KVM: fix vz.c kernel-doc notation
MIPS: octeon: Fix missed PTR->PTR_WD conversion
|
|
Russell King says:
====================
net: dsa: mv88e6xxx: convert to phylink_generic_validate()
The overall objective of this series is to convert the mv88e6xxx DSA
driver to use phylink_generic_validate().
Patch 1 adds a new helper mv88e6352_g2_scratch_port_has_serdes() which
indicates whether an 88e6352 port has a serdes associated with it. This
is necessary as ports 4 and 5 will normally be in automedia mode, where
the CMODE field in the port status register will change e.g. between 15
(internal PHY) and 9 (1000base-X) depending on whether the serdes has
link.
The existing code caches the cmode field, and depending whether the
serdes has link at probe time, determines whether we allow things such
as the serdes statistics to be accessed. This means if the link isn't
up at probe time, the serdes is essentially unavailable.
Patch 1 addresses this by reading the pin configuration to find out
whether the serdes is attached to port 4 or port 5.
Patch 2 is a joint effort between myself and Marek Behún, adding the
supported interfaces and MAC capabilities to all mv88e6xxx supported
switch devices. This is slightly more restrictive than the original
code as we didn't used to care too much about the interface mode, but
with this we do - which is why we must know if there's a serdes
associated now.
Patch 3 switches mv88e6xxx to use the generic validation by removing
the initialisation of the phylink_validate pointer in the dsa_ops
struct.
Patch 4 updates the statistics code to use the new helper in patch 1,
so the serdes statistics are available even if the link was down at
driver probe time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The decision whether to report serdes statistics currently depends on
the cached C_Mode value for the port, read at probe time or updated by
configuration. However, port 4 can be in "automedia" mode when it is
used as a serdes port, meaning it switches between the internal PHY and
the serdes, changing the read-only C_Mode value depending on which
first gains link. Consequently, the C_Mode value read at probe does not
accurately reflect whether the port has the serdes associated with it.
In "net: dsa: mv88e6xxx: add mv88e6352_g2_scratch_port_has_serdes()",
we added a way to read the hardware configuration to determine which
port has the serdes associated with it. Use this to determine which
port reports the serdes statistics.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the mv88e6xxx chip drivers are supplying the supported
interfaces and MAC capabilities, switch the driver to use the generic
phylink validation implementation by removing our own validation
implementations. This causes DSA to call phylink_generic_validate()
on our behalf.
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the
Marvell MV88E6xxx DSA switches in preparation to using these for the
validation functionality.
Patch co-authored by Marek.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org> [ fixed 6341 and 6393x ]
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Read the hardware configuration to determine which port is attached
to the serdes.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tobias Waldekranz says:
====================
net: dsa: mv88e6xxx: Improve standalone port isolation
The ideal isolation between standalone ports satisfies two properties:
1. Packets from one standalone port must not be forwarded to any other
port.
2. Packets from a standalone port must be sent to the CPU port.
mv88e6xxx solves (1) by isolating standalone ports using the PVT. Up
to this point though, (2) has not guaranteed; as the ATU is still
consulted, there is a chance that incoming packets never reach the CPU
if its DA has previously been used as the SA of an earlier packet (see
1/5 for more details). This is typically not a problem, except for one
very useful setup in which switch ports are looped in order to run the
bridge kselftests in tools/testing/selftests/net/forwarding. This
series attempts to solve (2).
Ideally, we could simply use the "ForceMap" bit of more modern chips
(Agate and newer) to classify all incoming packets as MGMT. This is
not available on older silicon that is still widely used (Opal Plus
chips like the 6097 for example).
Instead, this series takes a two pronged approach:
1/5: Always clear MapDA on standalone ports to make sure that no ATU
entry can lead packets astray. This solves (2) for single-chip
systems.
2/5: Trivial prep work for 4/5.
3/5: Trivial prep work for 4/5.
4/5: On multi-chip systems though, this is not enough. On the incoming
chip, the packet will be forced out towards the CPU thanks to
1/5, but on any intermediate chips the ATU is still consulted. We
override this behavior by marking the reserved standalone VID (0)
as a policy VID, the DSA ports' VID policy is set to TRAP. This
will cause the packet to be reclassified as MGMT on the first
intermediate chip, after which it's a straight shot towards the
CPU.
Finally, we allow more tests to be run on mv88e6xxx:
5/5: The bridge_vlan{,un}aware suites sets an ageing_time of 10s on
the bridge it creates, but mv88e6xxx has a minimum supported time
of 15s. Allow this time to be overridden in forwarding.config.
With this series in place, mv88e6xxx passes the following kselftest
suites:
- bridge_port_isolation.sh
- bridge_sticky_fdb.sh
- bridge_vlan_aware.sh
- bridge_vlan_unaware.sh
v1 -> v2:
- Wording/spelling (Vladimir)
- Use standard iterator in dsa_switch_upstream_port (Vladimir)
- Limit enabling of VTU port policy to downstream DSA ports (Vladimir)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Allow the ageing timeout that is set on bridges to be customized from
forwarding.config. This allows the tests to be run on hardware which
does not support a 10s timeout (e.g. mv88e6xxx).
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Given that standalone ports are now configured to bypass the ATU and
forward all frames towards the upstream port, extend the ATU bypass to
multichip systems.
Load VID 0 (standalone) into the VTU with the policy bit set. Since
VID 4095 (bridged) is already loaded, we now know that all VIDs in use
are always available in all VTUs. Therefore, we can safely enable
802.1Q on DSA ports.
Setting the DSA ports' VTU policy to TRAP means that all incoming
frames on VID 0 will be classified as MGMT - as a result, the ATU is
bypassed on all subsequent switches.
With this isolation in place, we are able to support configurations
that are simultaneously very quirky and very useful. Quirky because it
involves looping cables between local switchports like in this
example:
CPU
| .------.
.---0---. | .----0----.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-3-4-'
$ @ '---' $ @ % %
We have three physically looped pairs ($, @, and %).
This is very useful because it allows us to run the kernel's
kselftests for the bridge on mv88e6xxx hardware.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This chip has support for the same per-port policy actions found in
later versions of LinkStreet devices.
Fixes: f3a2cd326e44 ("net: dsa: mv88e6xxx: introduce .port_set_policy")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A VTU entry with policy enabled is used in combination with a port's
VTU policy setting to override normal switching behavior for frames
assigned to the entry's VID.
A typical example is to Treat all frames in a particular VLAN as
control traffic, and trap them to the CPU. In which case the relevant
user port's VTU policy would be set to TRAP.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear MapDA on standalone ports to bypass any ATU lookup that might
point the packet in the wrong direction. This means that all packets
are flooded using the PVT config. So make sure that standalone ports
are only allowed to communicate with the local upstream port.
Here is a scenario in which this is needed:
CPU
| .----.
.---0---. | .--0--.
| sw0 | | | sw1 |
'-1-2-3-' | '-1-2-'
'---'
- sw0p1 and sw1p1 are bridged
- sw0p2 and sw1p2 are in standalone mode
- Learning must be enabled on sw0p3 in order for hardware forwarding
to work properly between bridged ports
1. A packet with SA :aa comes in on sw1p2
1a. Egresses sw1p0
1b. Ingresses sw0p3, ATU adds an entry for :aa towards port 3
1c. Egresses sw0p0
2. A packet with DA :aa comes in on sw0p2
2a. If an ATU lookup is done at this point, the packet will be
incorrectly forwarded towards sw0p3. With this change in place,
the ATU is bypassed and the packet is forwarded in accordance
with the PVT, which only contains the CPU port.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miroslav Lichvar says:
====================
Virtual PTP clock improvements and fix
v2:
- dropped patch changing initial time of virtual clocks
The first patch fixes an oops when unloading a driver with PTP clock and
enabled virtual clocks.
The other patches add missing features to make synchronization with
virtual clocks work as well as with the physical clock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the physical clock supports cross timestamping (it has the
getcrosststamp() function), provide a wrapper in the virtual clock to
enable cross timestamping.
This adds support for the PTP_SYS_OFFSET_PRECISE ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the physical clock has the gettimex64() function, provide a
gettimex64() wrapper in the virtual clock to enable more accurate
and stable synchronization.
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Increase the maximum frequency offset of virtual clocks to 50% to enable
faster slewing corrections.
This value cannot be represented as scaled ppm when long has 32 bits,
but that is already the case for other drivers, even those that provide
the adjfine() function, i.e. 32-bit applications are expected to check
for the limit.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change is meant to permit a driver to perform "fragmenting" of the
page from within the driver instead of the current model which requires
pre-partitioning the page. The main motivation behind this is to support
use cases where the page will be split up by the driver after DMA instead
of before.
With this change it becomes possible to start using page pool to replace
some of the existing use cases where multiple references were being used
for a single page, but the number needed was unknown as the size could be
dynamic.
For example, with this code it would be possible to do something like
the following to handle allocation:
page = page_pool_alloc_pages();
if (!page)
return NULL;
page_pool_fragment_page(page, DRIVER_PAGECNT_BIAS_MAX);
rx_buf->page = page;
rx_buf->pagecnt_bias = DRIVER_PAGECNT_BIAS_MAX;
Then we would process a received buffer by handling it with:
rx_buf->pagecnt_bias--;
Once the page has been fully consumed we could then flush the remaining
instances with:
if (page_pool_defrag_page(page, rx_buf->pagecnt_bias))
continue;
page_pool_put_defragged_page(pool, page -1, !!budget);
The general idea is that we want to have the ability to allocate a page
with excess fragment count and then trim off the unneeded fragments.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
Trivial DSA conversions to phylink_generic_validate()
This series converts five DSA drivers to use phylink_generic_validate().
No feedback or testing reports were received from the CFT posting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the xrs700x
family of DSA switches and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.
According to commit ee00b24f32eb ("net: dsa: add Arrow SpeedChips
XRS700x driver") the switch supports one RMII port and up to three
RGMII ports. This commit assumes that port 0 is the RMII port and the
remainder are RGMII.
This commit also results in the Autoneg bit being set in the ethtool
link modes, which wasn't in the original; if this switch supports
RGMII to a 10/100/1G PHY, then surely we want to allow Autoneg on the
PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the QCA8K
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
In making this change, we bring consistency to the ethtool linkmodes
that phylink's validate step produces, thereby following the expected
behaviour as the phylink documentation has explained. Specifically, the
ethtool 1000baseX_Full capability is now permitted for all interface
modes, as it is a property of the PHY driver whether 1000baseX fiber
connections can be supported.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the
Microchip KSZ8795 DSA switch and remove the old validate implementation
to allow DSA to use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the bcm_sf2
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
The exclusion of Gigabit linkmodes for MII and Reverse MII links is
handled within phylink_generic_validate() in phylink, so there is no
need to make them conditional on the interface mode in the driver.
Thanks to Florian Fainelli for suggesting how to populate the supported
interfaces.
Link: https://lore.kernel.org/r/3b3fed98-0c82-99e9-dc72-09fe01c2bcf3@gmail.com
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Populate the supported interfaces and MAC capabilities for the AR9331
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mat Martineau says:
====================
mptcp: Miscellaneous changes for 5.18
Patch 1 has some minor cleanup in mptcp_write_options().
Patch 2 moves a rarely-needed branch to optimize mptcp_write_options().
Patch 3 adds a comment explaining which combinations of MPTCP option
headers are expected.
Patch 4 adds a pr_debug() for the MPTCP_RST option.
Patches 5-7 allow setting MPTCP_PM_ADDR_FLAG_FULLMESH with the "set
flags" netlink command. This allows changing the behavior of existing
path manager endpoints. The flag was previously only set at endpoint
creation time. Associated selftests also updated.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh setting and clearing selftests in
mptcp_join.sh.
Now we can set both backup and fullmesh flags, so avoid using the
words 'backup' and 'bkup'.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh flag setting and clearing support in
pm_nl_ctl:
# pm_nl_ctl set ip flags fullmesh
# pm_nl_ctl set ip flags nofullmesh
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added the fullmesh flag setting support in pm_netlink.
If the fullmesh flag of the address is changed, remove all the related
subflows, update the fullmesh flag and create subflows again.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch printed out the reset infos, reset_transient and reset_reason,
of MP_RST in mptcp_parse_option() to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
