summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-25ASoC: Intel: Skylake: Reset pipeline before its deletionAmadeusz Sławiński1-7/+16
Before actual deletion, pipeline should enter RESET state. Currently, pipe skips this checkpoint and goes straight to the finish line. This is not the expected path by the FW, so correct it. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Common: Fix NULL dereference in tx_wait_doneCezary Rojewski1-1/+1
rx_data and rx_bytes present for tx_wait_done are optional parameters. If not provided, function should not attempt to copy received data. This change fixes memcpy NULL pointer dereference issue occurring when optional rx_data is NULL while received message size is non-zero. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Fix race condition in IPC rx listGustaw Lewandowski1-1/+1
Since there are multiple IPCs being sent in a short span of time, there is a possibility of more than one message being on the Rx list after receiving response from firmware. In such cases, when the first notification of interrupt from firmware is received, driver retrieves the message from the Rx list but does not delete it from the list till the next lock. In the meantime, when another interrupt is received from the firmware, driver is reading the previous message again since the previous message has not been removed from the list. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Read HIPCT extension before clearing DONE bitCezary Rojewski2-2/+2
Host clears DONE bit to signal IPC target it has completed the operation. Once this is done, IPC target i.e. DSP may proceed with the next reply, filling registers with new portion of data. Because of this, host should always read all registers prior to clearing DONE and BUSY bits to ensure no desynchronization happens the time in between clearing bits and reading message data (here, extension). Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flowAmadeusz Sławiński1-42/+35
There are a few soc_tplg_dapm_widget_*_create functions with similar content, but slightly different flow, unify their flow and make sure that we go to error handler and free memory in case of failure. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: topology: Consolidate how dtexts and dvalues are freedAmadeusz Sławiński1-17/+24
Provide helper functions and use them to free dtexts and dvalues in topology. This is followup cleanup after related changes in this area as suggested in: https://mailman.alsa-project.org/pipermail/alsa-devel/2019-January/144761.html Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: hdac_hdmi: Set ops to NULL on removeAmadeusz Sławiński1-0/+6
When we unload Skylake driver we may end up calling hdac_component_master_unbind(), it uses acomp->audio_ops, which we set in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(), otherwise we will dereference no longer existing pointer. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk devAmadeusz Sławiński1-9/+7
When driver is probed, we iterate over NHLT and check if clk entries are present. For each such entry we call register_skl_clk and keep the result in data->clk[]. Currently data->clk is sparsely indexed using NHLT table iterator, while when freeing we use number of registered entries. Let's just use data->avail_clk_cnt as index, so it can be reset back in unregister_src_clk. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Properly cleanup on component removalAmadeusz Sławiński4-4/+23
When we remove component we need to reverse things which were done on init, this consists of topology cleanup, lists cleanup and releasing firmware. Currently cleanup handlers are put in wrong places or otherwise missing. So add proper component cleanup function and perform cleanups in it. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Add function to cleanup debugfs interfaceAmadeusz Sławiński2-0/+14
Currently debugfs has no cleanup function. Add skl_debufs_exit function so we can clean after ourselves properly. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Don't return failure on machine driver reloadAmadeusz Sławiński1-5/+0
When we unload and reload machine driver, we shouldn't return that we failed to initialize. This allows to reload machine driver, without having to unload whole stack. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: compress: Fix memory leak from snd_soc_new_compressAmadeusz Sławiński1-11/+6
Change kzalloc to devm_kzalloc, so compr gets automatically freed when it's no longer needed. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ALSA: hdac: Fix codec name after machine driver is unloaded and reloadedAmadeusz Sławiński1-2/+6
Currently on each driver reload internal counter is being increased. It causes failure to enumerate driver devices, as they have hardcoded: .codec_name = "ehdaudio0D2", As there is currently no devices with multiple hda codecs and there is currently no established way to reliably differentiate, between them, always assign bus->idx = 0; This fixes a problem when we unload and reload machine driver idx gets incremented, so .codec_name would've needed to be set to "ehdaudio1D2" after first reload and so on. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Initialize lists before access so they are safe to useAmadeusz Sławiński2-4/+4
If skl_probe_work() was not run driver ends up dereferencing NULL pointer when operating on lists in skl_platform_unregister(). To fix this initialize lists in skl_create(). Also run cancel_work_sync() before all cleanup functions, so we don't end up unnecessarily running probe work. Easily reproducible with: while true; do modprobe snd_soc_skl; rmmod snd_soc_skl; done (with the assumption that relevant drivers are added to blacklist on system boot) Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: Intel: Skylake: Use recommended SDxFMT programming sequencePaweł Harłoziński3-4/+16
For BXT platforms, the recommended sequence to program the SDxFMT is to first couple the stream, write the format and decouple again. For all other platforms said sequence remains unchanged. To prevent code duplication, IS_BXT (and consequently IS_CFL) macro is relocated to hda_codec.h file so it can be accessed by SKL driver. Signed-off-by: Paweł Harłoziński <pawel.harlozinski@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25ASoC: rt5677: depop stereo dacCurtis Malainey1-1/+2
Upon enabling the ASRC DAC we need a delay to avoid popping the speakers. Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Cc: Ross Zwisler <zwisler@chromium.org> Tested-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: rk3399_gru_sound: Support 32, 44.1 and 88.2 kHz sample ratesEnric Balletbo i Serra1-13/+1
According to the datasheet the max98357a also supports 32, 44.1 and 88.2 kHz sample rate. This support was also introduced recently by commit fdf34366d324 ("ASoC: max98357a: add missing supported rates"). Actually the machine driver validates the supported sample rates but this is not really needed because the component driver can all apply whatever constraints are needed and do their own validation. So, remove the checks from the machine driver as are not needed at all. This way, we also support 32, 44.1 and 88.2 kHz sample rates and we get rid of the errors like the below. rk3399-gru-sound sound: rockchip_sound_max98357a_hw_params() doesn't support this sample rate: 44100 rk3399-gru-sound sound: ASoC: machine hw_params failed: -22 Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: soc-core: use soc_find_component() at snd_soc_find_dai()Kuninori Morimoto1-3/+2
snd_soc_find_dai() finds component first via specified snd_soc_dai_link_component, and find DAI from it. We already have soc_find_component() to find component, but soc_find_dai() has original implementation to find component. We shouldn't have duplicate implementation to do same things. This patch uses soc_find_component() at soc_find_dai() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: soc-core: soc_find_component() uses snd_soc_dai_link_componentKuninori Morimoto1-25/+20
soc_find_component() is using "of_node" and "name" to finding component, but we should use snd_soc_dai_link_component now, because it is created to such purpose. This patch uses snd_soc_dai_link_component for soc_find_component(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: soc-core: soc_find_component() uses snd_soc_is_matching_component()Kuninori Morimoto1-9/+5
ALSA SoC already has snd_soc_is_matching_component() to confirming matching component, but, soc_find_component() has original implementation to confirm component. We shouldn't have duplicate implementation to do same things. This patch uses snd_soc_is_matching_component() at soc_find_component() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: soc-core: move soc_find_component()Kuninori Morimoto1-19/+19
move soc_find_component() next to snd_soc_is_matching_component(). This is prepare for soc_find_component() cleanup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24ASoC: SOF: Intel: hda: remove duplicated include from hda.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: rt5514-spi: don't use snd_soc_lookup_component()Kuninori Morimoto1-3/+1
rt5514-spi can use dev_get_drvdata() to get its component because it is using snd_soc_component_set_drvdata(); static int rt5514_spi_pcm_probe(...) { ... => snd_soc_component_set_drvdata(component, ...); ... } We don't need to use snd_soc_lookup_component() for it. This patch uses dev_get_drvdata() instead of snd_soc_lookup_component(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: pcm3168a: Add support for multi DIN/DOUT with TDM slots parameterPeter Ujfalusi1-7/+24
The driver was wired to be only usable in DIN1/DOUT1 mode, switching between TDM and non TDM modes based on the number of channels. While keeping this functionality for compatibility add support for using all DIN1/2/3/4 and DOUT1/2/3 if it is needed by setting the TDM slots to 2. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: pcm3168a: Rename min_frame_size to slot_widthPeter Ujfalusi1-5/+5
It represents slot size and not frame. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: ti: davinci-mcasp: Fix slot mask settings when using multiple AXRsPeter Ujfalusi1-7/+6
If multiple serializers are connected in the system and the number of channels will need to use more than one serializer the mask to enable the serializers were left to 0 if tdm_mask is provided Fixes: dd55ff8346a97 ("ASoC: davinci-mcasp: Add set_tdm_slots() support") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: ti: davinci-mcasp: Set unused serializers as INACTIVEPeter Ujfalusi1-6/+8
Unused serializers needs to be configured as INACTIVE, otherwise they will underflow/overflow when multiple serializers are connected, but some are not needed for the given stream. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: Intel: Skylake: Switch to modern UUID APIAndy Shevchenko6-43/+32
Switch the driver to use modern UUID API, i.e. guid_t type and accompanying functions, such as guid_equal(). Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90Richard Fitzgerald3-0/+2665
Adds the codec driver for the CS47L90 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform. Signed-off-by: Nikesh Oswal <nikesh@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85Richard Fitzgerald3-0/+2742
Adds the codec driver for the CS47L85 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform. Signed-off-by: Nariman Poushin <npoushin@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35Richard Fitzgerald3-0/+1790
Adds the codec driver for the CS47L35 SmartCodec. This is a multi-functional codec based on the Cirrus Logic Madera platform. Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: madera: Add common support for Cirrus Logic Madera codecsRichard Fitzgerald7-0/+4705
The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs. This patch adds common support code shared by all Madera codecs. This patch also adds the pdata to the parent mfd pdata struct. Since there is a circular build dependency it's convenient to patch them both atomically. Signed-off-by: Nariman Poushin <nariman@opensource.cirrus.com> Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com> Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com> Signed-off-by: Ajit Pandey <ajit.pandey@incubesol.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: madera: Add DT bindings for Cirrus Logic Madera codecsRichard Fitzgerald3-0/+97
The Cirrus Logic Madera codecs are a family of related codecs with extensive digital and analogue I/O, digital mixing and routing, signal processing and programmable DSPs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-20ASoC: stm32: dfsdm: add 16 bits audio record supportOlivier Moysan1-10/+39
Add support of audio 16 bits format record to STM32 DFSDM driver. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: soc-utils: remove dummy PlatformKuninori Morimoto1-25/+0
ALSA SoC used 2 type of Platform if sound card doesn't need Platform. 1) use Dummy Platform as Platform component 2) use CPU component as Platform component Now, ALSA SoC allows "no Platform" settings, and it will behave same as 2) case selection. And, all sound card which doesn't need specific Platform are now not selecting Platform any more. This means, no sound card is using dummy Platform on ALSA SoC any more. This patch removes unused dummy Platform. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: rockchip: rk3399_gru_sound: don't select unnecessary PlatformKuninori Morimoto1-13/+6
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: qcom: don't select unnecessary PlatformKuninori Morimoto1-1/+3
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: simple-card-utils: don't select unnecessary PlatformKuninori Morimoto1-3/+12
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ux500: mop500: don't select unnecessary PlatformKuninori Morimoto1-6/+2
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ti: rx51: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ti: omap-twl4030: don't select unnecessary PlatformKuninori Morimoto1-10/+2
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ti: omap-hdmi: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ti: omap-abe-twl6040: don't select unnecessary PlatformKuninori Morimoto1-14/+8
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: ti: davinci-evm: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: trimslice: don't select unnecessary PlatformKuninori Morimoto1-5/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: tegra_wm9712: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: tegra_wm8903: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: tegra_wm8753: don't select unnecessary PlatformKuninori Morimoto1-4/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: tegra_sgtl5000: don't select unnecessary PlatformKuninori Morimoto1-6/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-19ASoC: tegra: tegra_rt5677: don't select unnecessary PlatformKuninori Morimoto1-5/+1
ALSA SoC is now supporting "no Platform". Sound card doesn't need to select "CPU component" as "Platform" anymore if it doesn't need special Platform. This patch removes such settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 09:29:45 +0300