| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260807143428.008222056@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Benjamin Boortz <bennib@mailbox.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fb0bf289f5d529336ef490c8273e88a8a8b29f69 upstream.
The commit 7aa7d4bf9d3f ("usb: typec: ucsi: Fix race condition and
ordering in port unregistration") consolidated port teardown into the
ucsi_unregister_port() helper. However, it introduced an ordering problem
in the ucsi_init() error path.
Fix this by ensuring ucsi_unregister_port() is called before we unregister
their corresponding lockdep keys.
Cc: stable@vger.kernel.org
Fixes: 7aa7d4bf9d3f ("usb: typec: ucsi: Fix race condition and ordering in port unregistration")
Reported-by: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/all/22064276-6c56-411a-9f20-6917ceeb865f@intel.com/
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260717104614.325250-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8419331e64d92a8de5fc4feef0e305f201fb8b33 ]
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360af1 ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e29520a28c27f5a2388742c957a6a87ee7a)
(cherry picked from commit 8419331e64d92a8de5fc4feef0e305f201fb8b33)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 48ab86360af117123eb1b15e38f068acf3826400 ]
[Why]
After unifying DCN interrupt sources under VUPDATE_NO_LOCK, we have two
remaining issues to clean up:
1. On DCN, flip completion is now delivered from VUPDATE_NO_LOCK
(dm_crtc_high_irq_handler) instead of GRPH_PFLIP. But VUPDATE_NO_LOCK
fires every frame, regardless of whether a flip has latched.
2. There is a window during commit where a flip is armed (pflip_status =
SUBMITTED) but not yet programmed into HW. If the VUPDATE_NO_LOCK
fires in that window, its handler would deliver a flip event to
userspace before HW has latched to it. If userspace then renders to
what it believes is now the back buffer (but HW is still latched to
it!), it will cause display corruption. This issue seemed to have
been introduced by:
commit 1159898a88db ("drm/amd/display: Handle commit plane with no FB.")
Enabling replay or psr extended the duration of this window, and
hence made corruption more likely to be observed.
[How]
* Move acrtc->event/pflip_status arming to after
update_planes_and_stream_adapter() has programmed the flip into HW.
This closes the window where pflip_status is SUBMITTED but the flip is
not yet programmed.
* Add dc_get_flip_pending_on_otg(), which reads the HUBP flip-pending
status straight from HW for the pipe(s) bound to an OTG instance. It
is keyed only by otg_inst and does not take or mutate a
dc_plane_state, so it is safe to call from the OTG interrupt handler
without racing a concurrent commit that may be modifying plane state.
* Optimistically query for flip-pending after programming, in the event
that HW latched to the new fb between programming start and arming
event. If it latched, send the vblank event immediately, rather than
wait for the next vblank IRQ.
* In the VUPDATE_NO_LOCK handler, only deliver flip completion once
dc_get_flip_pending_on_otg() reports the flip is no longer pending.
Otherwise leave the flip armed and retry on the next vupdate.
* For DCE, maintain the existing behavior of arming flips before
programming, and relying on GRPH_FLIP to fire at HW latch.
v2:
* Drop flip_programmed completion object, instead move
event/pflip_status arming after programming.
* For DCN, optimistically query for flip pending immediately after
programming, and if it latched, send event right away.
v3:
* Fix event timestamps on optimistic flip latch detection, where it's
possible for it to run *before* the vupdate IRQ updates the timestamp.
* Add more docstrings for DCN vblank handling.
* Clean up if conditions in dm_arm_vblank_event().
* Code style cleanup on braces surrounding multi-line statements.
Fixes: 9b47278cec98 ("drm/amd/display: temp w/a for dGPU to enter idle optimizations")
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/3787
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141
Assisted-by: Copilot:claude-opus-4.8
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f64a9be5653689ff43e148cd8a6483077488c8e5)
Cc: stable@vger.kernel.org # 8382cd234981: drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8505f9d6b223a26854003bfdba1a0772457886d ]
Constrained Baseline Profile (CBP) and Baseline Profile (BP) have been
treated as the same.
Introduce the ability to differentiate between the two.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit af80e2bfde9312c76b60cf9274248dce0410b30d ]
Before arming a user job, xe_exec_ioctl() only added the VM's
dma-resv KERNEL slot as a dependency. That slot covers rebinds and
the kernel operations of the VM's private BOs, but not external BOs
(bo->vm == NULL), which carry their kernel operations (evictions,
moves, ...) in their own dma-resv KERNEL slot.
The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for
memory management operations that must complete before the BO or its
backing store may be used: any accessor is required to wait on the
KERNEL fences before touching the resv. By skipping the external BOs'
KERNEL slots, the exec path violated that contract and could schedule
a user job while a kernel operation on an external BO mapped by the VM
was still in flight, racing against it and potentially reading or
writing memory that was being moved.
Replace the VM-only dependency with an iteration over every object
locked by the exec, adding each object's KERNEL slot as a job
dependency. This covers the VM resv (rebinds and private BOs) as well
as every external BO, mirroring the drm_gpuvm_resv_add_fence() call
that later publishes the job fence to the same set of objects.
Long-running mode continues to skip this, as before.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Assisted-by: GitHub_Copilot:claude-opus-4.8
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260702215805.4011228-1-matthew.brost@intel.com
(cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ce44b78512e9102aea54ff6b6e521d6c8de9f31c ]
Nobody makes any use of it. Possible internal future users can
instead use the _index variable. External users shouldn't use
it since the array it's pointing into is internal drm_exec state.
v2:
- Use a unique id for the loop variable (Christian)
Assisted-by: GitHub Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-2-thomas.hellstrom@linux.intel.com
Stable-dep-of: af80e2bfde93 ("drm/xe: Wait on external BO kernel fences in exec IOCTL")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ba7fd163422877ad5a5cf31306a38c07d3932b0c ]
Set the TTM device beneficial_order to 9 (2M), which is the sweet
spot for Xe when attempting reclaim on system memory BOs, as it matches
the large GPU page size. This ensures reclaim is attempted at the most
effective order for the driver.
This fixes an issue where an order-10 (4M) allocation cannot be found
despite an abundance of memory. The 4M allocation triggers reclaim,
unnecessarily evicting the working set and hurting performance. Since
the TTM infrastructure was introduced recently, we are tagging the TTM
patch as the Fixes target, even though this resolves an Xe-side problem.
Fixes: 7e9c548d3709 ("drm/ttm: Allow drivers to specify maximum beneficial TTM pool size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260611235844.3725147-1-matthew.brost@intel.com
(cherry picked from commit 0d81db90d364cb3d733410829118759f28957c5a)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2841cea001b983db79dc1fdf160e65318dfda3cd ]
We would like to initialize more of the xe_device struct also from
the kunit code, as it should be safe to use most of the generic drm
or xe components without doing any additional tweaks. Separate early
xe initialization code to a new function, so it can be reused.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-6-michal.wajdeczko@intel.com
Stable-dep-of: ba7fd1634228 ("drm/xe: Set TTM device beneficial_order to 9 (2M)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c03d9fbe77ec5002a2345b9be464683e0b157709 ]
The xe_info_init_early() is a place where we initialize those of
the xe->info fields that do not require any additional hardware
probes. Move the initialization of the devid/revid also there, but
to avoid breaking the kunit helper, which also calls this function,
keep their initialization separate in sub-function so we can easily
stub it when running the kunit test.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-5-michal.wajdeczko@intel.com
Stable-dep-of: ba7fd1634228 ("drm/xe: Set TTM device beneficial_order to 9 (2M)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f1d581bb50ed54b71a8121d3d46fe2627fddd147 ]
The xe_info_init_early() is a place where we initialize those of
the xe->info fields that do not require any additional hardware
probes. Move the initialization of the force_execlist flag there.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-4-michal.wajdeczko@intel.com
Stable-dep-of: ba7fd1634228 ("drm/xe: Set TTM device beneficial_order to 9 (2M)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8a09097b11ca4d436691f64c3cc0958006f36e33 ]
We never used or need anything from the struct pci_device_id there.
And while around, add simple kernel-doc for this function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20260526195452.20545-3-michal.wajdeczko@intel.com
Stable-dep-of: ba7fd1634228 ("drm/xe: Set TTM device beneficial_order to 9 (2M)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7aa7d4bf9d3fa9a6a47b640ad103ab433b7ff261 ]
A synchronization issue exists during port unregistration where pending
partner work items can race against workqueue destruction, leading to
use-after-free conditions:
cros_ec_ucsi cros_ec_ucsi.3.auto: error -ETIMEDOUT: PPM init failed
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__queue_work+0x83/0x4a0
Call Trace:
<IRQ>
__cfi_delayed_work_timer_fn+0x10/0x10
run_timer_softirq+0x3b6/0xbd0
sched_clock_cpu+0xc/0x110
irq_exit_rcu+0x18d/0x330
fred_sysvec_apic_timer_interrupt+0x5e/0x80
Fix this by ensuring strict ordering and proper serialization during
teardown:
1. Move ucsi_unregister_partner() to the beginning of the teardown
sequence and protect it under the connector mutex lock.
2. Ensure all pending partner tasks are explicitly flushed and finished
before the workqueue is destroyed.
3. Switch from mod_delayed_work() to a cancel_delayed_work() and
queue_delayed_work() sequence. This guarantees that items currently marked
as pending won't be scheduled an additional time, preventing a double
release of resources which leads to the following crash:
Oops: general protection fault, probably for non-canonical address
0xdead000000000122: 0000 [#1] SMP NOPTI
Workqueue: cros_ec_ucsi.3.auto-con2 ucsi_poll_worker
RIP: 0010:ucsi_poll_worker+0x65/0x1e0
Call Trace:
<TASK>
process_scheduled_works+0x218/0x6d0
worker_thread+0x188/0x3f0
__cfi_worker_thread+0x10/0x10
kthread+0x226/0x2a0
To ensure these rules are applied identically across both the normal
teardown and the ucsi_init() error paths, consolidate the cleanup logic
into a new helper, ucsi_unregister_port().
Cc: stable <stable@kernel.org>
Fixes: b9aa02ca39a4 ("usb: typec: ucsi: Add polling mechanism for partner tasks like alt mode checking")
Fixes: b13abcb7ddd8 ("usb: typec: ucsi: Fix NULL pointer access")
Fixes: fac4b8633fd6 ("usb: ucsi: Ensure connector delayed work items are flushed")
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260707141736.1635698-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8c22256bbafad3dc5fdbe9f684d045b67ff06a68 ]
Lockdep detects a possible recursive locking scenario during
ucsi init:
[ 5.418616] ============================================
[ 5.418634] WARNING: possible recursive locking detected
[ 5.418706] --------------------------------------------
[ 5.418725] kworker/4:1/82 is trying to acquire lock:
[ 5.418759] ffff888119a34648 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418801]
but task is already holding lock:
[ 5.418835] ffff888119a34080 (&con->lock){+.+.}-{3:3}, at: ucsi_init_work+0x1a78/0x2eb0 [typec_ucsi]
[ 5.418884]
other info that might help us debug this:
[ 5.418904] Possible unsafe locking scenario:
[ 5.418937] CPU0
[ 5.418956] ----
[ 5.418991] lock(&con->lock);
[ 5.419013] lock(&con->lock);
[ 5.419033]
*** DEADLOCK ***
[ 5.419387] Call Trace:
[ 5.419406] <TASK>
[ 5.419425] dump_stack_lvl+0x61/0xa0
[ 5.419448] print_deadlock_bug+0x4a6/0x650
[ 5.419483] __lock_acquire+0x62b6/0x7f50
[ 5.419507] lock_acquire+0x11b/0x390
[ 5.419654] __mutex_lock+0xbc/0xcd0
[ 5.419741] ucsi_init_work+0x1a78/0x2eb0
[ 5.419785] ? worker_thread+0xf53/0x2bc0
[ 5.419819] worker_thread+0xff4/0x2bc0
[ 5.419842] kthread+0x2a7/0x330
[ 5.419863] ? __pfx_worker_thread+0x10/0x10
[ 5.419896] ? __pfx_kthread+0x10/0x10
[ 5.419916] ret_from_fork+0x38/0x70
[ 5.419936] ? __pfx_kthread+0x10/0x10
[ 5.419969] ret_from_fork_asm+0x1b/0x30
[ 5.419991] </TASK>
[ 5.420009] ---[ end trace 0000000000000000 ]---
The problem is that all connector locks belong to the same
lockdep lock class, so the following loop:
for (i = 0; i < ucsi->cap.num_connectors; i++)
ucsi_register_port(connector[i])
mutex_lock(&connector[i]->lock)
looks like a recursive acquire of the same mutex. Put each connector
lock into a dedicated lock class so that lockdep doesn't see it as a
possible recursion.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260515060042.136083-1-senozhatsky@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 7aa7d4bf9d3f ("usb: typec: ucsi: Fix race condition and ordering in port unregistration")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ef78e2a22f72c892fd6663f0760abd208d49a3e2 ]
Since multiple OA streams might be open in parallel on a gt, ensure that
proper locking is in place. Also ensure that OA registers are whitelisted
when the first OA stream is open and de-whitelisted after the last OA
stream is closed.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-10-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63ddb3ad08ff4e89c108499dfec5e9be5ddc25c9 ]
Whitelist OA registers on stream open and de-whitelist on stream
close/release. Whitelisting is only done when 'stream->sample' is
true. 'stream->sample' is only true when (a) xe_observation_paranoid is set
to false by system admin, or (b) the process is perfmon_capable(). This
therefore enforces the OA register whitelisting security requirements.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-9-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ebba7ce65252a4ab0e3794ff14854df2afca5c08 ]
Whitelist or de-whitelist OA registers for all hwe's on the gt on which the
OA stream is opened. This simplifies the case where an oa unit has 0
attached hwe's (but which monitors OA events on the associated GT).
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-8-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b422babd77fac2c96b92db484050e460899bddaf ]
Whitelist or de-whitelist OA registers by setting or resetting the 'deny'
bit in OA nonpriv registers and writing new register values to HW.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-7-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a19a83721a28ccaddace846da70da5c53d7dd052 ]
Now we can save OA whitelisting nonpriv registers to register save/restore
lists. OA nonpriv registers are saved to both hwe->oa_sr as well as
hwe->reg_sr.
During probe, resume and gt-reset flows KMD will apply hwe->reg_sr,
ensuring OA registers are de-whitelisted after these events. For
engine-reset, hwe->reg_sr is registered with GuC and GuC will apply these
registers, ensuring OA registers are de-whitelisted after engine resets.
hwe->oa_sr is used for whitelisting or de-whitelisting OA registers during
OA operation, by toggling the 'deny' bit on oa stream open/close.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-6-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4fe2844b0f0c7cdc45ca4c4c62ca56b7f26c514c ]
Generalize whitelist_apply_to_hwe to construct both non-OA and OA
whitelist nonpriv registers.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-5-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 60d49ea28bb190a640bd8dc3f4c946e0811a948c ]
In order to dynamically whitelist/dewhitelist OA registers on OA stream
open/close, we need to keep track of nonpriv slots occupied by non-OA
register whitelists.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-4-ashutosh.dixit@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31e2437561621b4867c08efc890bf629d017df03 ]
OA registers are dynamically whitelisted (and again dewhitelisted) on OA
stream open/close. Maintaining OA whitelists separately from non-OA
register whitlists simplifies this management of OA register
whitelisting/dewhitelisting.
(cherry picked from commit c478244a9e2d14b3f1f92e8bd293919e554622a5)
[ adapted RTP table from struct wrapper macro `XE_RTP_TABLE_SR()` back to plain `struct xe_rtp_entry_sr[]` array and restored the 5-arg `xe_rtp_process_to_sr()` call with `ARRAY_SIZE()` ]
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-3-ashutosh.dixit@intel.com
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 706c93c5813caabbb0d0a576c017d15aeec2c113 upstream.
vmw_external_bo_copy() trusts caller-supplied offsets, strides, and
heights and operates on imported dma-buf vmaps:
- The equal-stride memcpy() bound was clamped after subtracting the
offsets from dst_size and src_size; an offset larger than the BO
size wraps the unsigned subtraction to a huge value and the
resulting memcpy() runs off the end of the vmap. dst_stride *
height is also a u32 multiplication that can overflow.
- The non-equal-stride row-by-row path had no bound at all. The
loop touches bytes through offset + (height - 1) * stride +
width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes),
and could likewise step past the end of either mapping.
The offsets and strides are derived from STDU/SOU plane state, so a
configured CRTC submitting a crafted atomic commit on an imported
framebuffer can reach this path.
Validate the exact row-copy endpoint against each BO's size up front
using check_mul_overflow() and check_add_overflow(). Use the bulk
memcpy() path only when width_in_bytes covers the whole stride;
otherwise copy one row at a time so partial-row updates near the bottom
of a framebuffer remain valid. Also reject zero strides and stride <
width_in_bytes, both of which the row-by-row path cannot represent
safely.
Fixes: 50f119925091 ("drm/vmwgfx: Fix prime with external buffers")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-13-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 54d56d5b42d2e4c72ba6e365e9774da90698aa22 upstream.
vmw_shader_define() validates the user-supplied shader window against
its backing buffer with
(u64)buffer->tbo.base.size < (u64)size + (u64)offset
drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is
near U64_MAX the unsigned addition wraps and the resulting tiny value
passes the check. The unbounded offset is then stored in
res->guest_memory_offset and forwarded to host SVGA shader-create
commands.
Use check_add_overflow() to detect the wrap and compare the resulting
endpoint against the buffer size.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-12-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5ed8749168ad13c0dbaa8300f68d854b6076966 upstream.
vmw_cursor_plane_atomic_check() bounds cursor width and height only
on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the
default on modern hosts -- accepts any size. When the requested size
exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE,
vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL.
Its return value is then discarded in vmw_cursor_plane_prepare_fb(),
so the subsequent vmw_cursor_update_mob() calls
vmw_bo_map_and_cache(NULL) and oopses inside
vmw_bo_map_and_cache_size() on the tbo.base.size load.
Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a
sufficiently large width or height (e.g. cursor_max_dim + 1).
Reject oversized cursors in atomic_check for both MOB-backed cursor
update types. The MOB byte-size limit only applies to the
SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for
GB_ONLY); compute the required MOB size in 64-bit to avoid overflow
when very large dimensions are requested.
In prepare_fb only call vmw_cursor_mob_get()/_map() for
VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual
directly and would otherwise be silently downgraded to NONE on hosts
without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always
returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get()
or vmw_cursor_mob_map() fails so the update path does not run with a
NULL backing MOB.
Fixes: 965544150d1c ("drm/vmwgfx: Refactor cursor handling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-10-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 05eaa887e7b4f40fba425f8a1d7a5a8a043092a6 upstream.
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory.
Fixes: 7b0062036c3b ("drm/vmwgfx: Implement virtual crc generation")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-9-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4f1db96bfd68b81053693ba53405b6f510ac16c upstream.
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit.
Fixes: 4e4ddd477743 ("drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-8-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85891d174707d8bddcec7a888fb4e1d17def34f3 upstream.
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front.
Fixes: 7a73ba7469cb ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-7-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f739416dc555fa205a785e5135d73fa39b26f35d upstream.
ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's
dma_buf->ops do not match the ttm_object_device's ops, but does so
without releasing the reference acquired by dma_buf_get(). Any
unprivileged renderD client passing a non-vmwgfx prime fd through the
DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per
call and indefinitely pins the foreign exporter's GEM resources.
Funnel the error path through the existing dma_buf_put() so the
reference is always dropped.
Fixes: 65981f7681ab ("drm/ttm: Add a minimal prime implementation for ttm base objects")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-6-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 250af2e8c3e90dc978e062a936b633870a22e660 upstream.
vmw_fence_fifo_down() drops fman->lock to wait on a fence and, on
timeout, mutates fman->fence_list via list_del_init() and signals
the fence without re-acquiring the lock. __vmw_fences_update() walks
and removes entries from the same list under fman->lock from any
other waiter, the fence-IRQ thread, or vmw_fences_update(), so the
unlocked list_del_init() can corrupt the list head.
Re-take fman->lock before manipulating fence->head and use
dma_fence_signal_locked(). Wrap the locked signalling in
dma_fence_begin_signalling() / dma_fence_end_signalling() so the
lockdep annotation that dma_fence_signal() previously provided is
preserved (the same pattern as __vmw_fences_update()).
dma_fence_put() is moved outside the lock to avoid a recursive
acquire from vmw_fence_obj_destroy(), which also takes fman->lock.
Fixes: ae2a104058e2 ("vmwgfx: Implement fence objects")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-5-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f47d542d5912f236273399d7139b522f6950e2e4 upstream.
vmw_bo_dirty_transfer_to_res() and vmw_bo_dirty_clear() compute the
intersection of a resource's page range with the BO's tracked dirty
range, but clamp res_end against dirty->end with max() instead of
min(). When dirty->end exceeds the resource end, the loop walks past
the resource's pages, calls vmw_resource_dirty_update() for ranges
owned by other resources sharing the same backing MOB and clears
their pending dirty bits via bitmap_clear(). The result is silent
loss of writeback for unrelated resources whenever two resources
share a MOB.
Use min() in both functions so the loop is bounded to the
intersection of the resource and dirty ranges.
Fixes: b7468b15d271 ("drm/vmwgfx: Implement an infrastructure for write-coherent resources")
Fixes: 965544150d1c ("drm/vmwgfx: Refactor cursor handling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-4-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55ec09c9ce10b1272802c7ab6c1be2ea0dbc68db upstream.
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published.
Fixes: 9c079b8ce8bf ("drm/vmwgfx: Adapt execbuf to the new validation api")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-3-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83195b778f2d109a3a4f3ffaba4dce7e4cdb58aa upstream.
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty.
Fixes: 668b206601c5 ("drm/vmwgfx: Stop using raw ttm_buffer_object's")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-2-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff8bc5a68a9a70bdc38d61a72c7a49c56063f9d2 upstream.
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9cdc85839e4fe2c760aa4ca6cc341c31ad1918a upstream.
In kfd_criu_restore_event, there was no handling for
the event priv data having an invalid event type. The priv
data here is untrusted and can be invalid.
In that case, fail with EINVAL.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2e8e9963cd5c41aa14fd5316bf9ec92e7a0e3097)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83463a96ea3c7d8ae636a4d6a0ba63c9ce410724 upstream.
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
Fixes: 42ea9cf2f16b ("drm/amdkfd: Relax size checking during queue buffer get")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 38b73293f38658a4685ffcea666462024f858ad9 upstream.
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
Reported-by: Deucher, Alexander <alexander.deucher@amd.com>
Signed-off-by: Vladimir Marioukhine <Vladimir.Marioukhine@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99b2fe4f19e3be0a8d0a0b5ea98d855970889653 upstream.
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 114b42507b6a23d9d24e24e4ef165233332c64d4 upstream.
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf23c ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ccb87b1c9be594fc2c36b0a4006a66f08dee1c8 upstream.
Commit a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
had also changed the "Set retimer failed" messages from DC_LOG_DEBUG()
to DC_LOG_ERROR(). This unfortunately can create log spam.
Change those back to DC_LOG_DEBUG() only.
Fixes: a4f01bf729b2 ("drm/amd/display: Refactor and fix link_dpms I2C")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5520
Signed-off-by: Alan Swanson <reiver@improbability.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit da8609eef18b0a3490d0e1fa9440659fadc8194d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c216b39fbbc4b007fd6984cffd85039d49a55154 upstream.
Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c0d5174b09640d8b560764aa5a177630e076e93)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f327e389c07cfc3a2f6ff54f6214e1a52d457edc upstream.
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 000acb4ce7fb9feba3072ce468ad681f6585cd5d upstream.
Verify that the phantom plane was allocated to avoid a later
segfault.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4970
Fixes: 70839da63605 ("drm/amd/display: Add new DCN401 sources")
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1849a64165ccc23d3e5fc22b8be19227c21c1871 upstream.
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f3c ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121fb6 ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790bafec47a507e9662bf380f2e027d420)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a65f5179d3f0c93da31b450aeb416eaa22f1912b upstream.
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03fe5 ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db69777cd2f059d50fe34e365ddd5add)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bb493058c35c8676e48269ab6732688ea733d23c upstream.
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba4885 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd30099ef7baeb6ba45bb59daad80631)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 048f4541b71fb19645fb79d6e62e6e4da23a4035 upstream.
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4fc ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48693ecafcae25af0c9d9ec31015ac77)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e70f6804b4d6256058c360b10e044ee04ea4a4e upstream.
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd649280c7dc6c22c8f877da3f54fcc441e1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f931c54b241ce2f36bfc34955aec43a188276b8d upstream.
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c8850cc247aa12b104bb29ea387bcdcbb1)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d8726ef11512754a68c0ab53c57634a569b8feff upstream.
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c6d ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9daa295462df24982ce6878db997a380a)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
