summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-11-08cpufreq: OMAP: only supports OPP libraryNishanth Menon1-2/+1
OMAP2 is the only family using clk_[init|exit]_cpufreq_table, however, the cpufreq code does not currently use clk_init_cpufreq_table. As a result, it is unusuable for OMAP2 and only usable only on platforms using OPP library. Remove the unbalanced clk_exit_cpufreq_table(). Any platforms where OPPs are not availble will fail on init because a freq table will not be properly initialized. Signed-off-by: Nishanth Menon <nm@ti.com> [khilman@ti.com: changelog edits, and graceful failure mode changes] Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: dont support !freq_tableNishanth Menon1-34/+33
OMAP2+ all have frequency tables, hence the hacks we had for older silicon do not need to be carried forward. As part of this change, use cpufreq_frequency_table_target to find the best match for frequency requested. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: deny initialization if no mpudevNishanth Menon1-7/+8
if we do not have mpu_dev we normally fail in cpu_init. It is better to fail driver registration if the devices are not available. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: move clk name decision to initNishanth Menon1-7/+13
Clk name does'nt need to dynamically detected during clk init. move them off to driver initialization, if we dont have a clk name, there is no point in registering the driver anyways. The actual clk get and put is left at cpu_init and exit functions. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: notify even with bad boot frequencyColin Cross1-1/+1
Sometimes, bootloaders starts up with a frequency which is not in the OPP table. At cpu_init, policy->cur contains the frequency we pick at boot. It is possible that system might have fixed it's boot frequency later on as part of power initialization. After this condition, the first call to omap_target results in the following: omap_getspeed(actual device frequency) != policy->cur(frequency that cpufreq thinks that the system is at), and it is possible that freqs.old == freqs.new (because the governor requested a scale down). We exit without triggering the notifiers in the current code, which does'nt let code which depends on cpufreq_notify_transition to have accurate information as to what the system frequency is. Instead, we do a normal transition if policy->cur is wrong, then, freqs.old will be the actual cpu frequency, freqs.new will be the actual new cpu frequency and all required notifiers have the accurate information. Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Colin Cross <ccross@google.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: Enable all CPUs in shared policy maskTodd Poynor1-3/+1
Enable all CPUs in the shared policy in the CPU init callback. Otherwise, the governor CPUFREQ_GOV_START event is invoked with a policy that only includes the first CPU, leaving other CPUs uninitialized by the governor. Signed-off-by: Todd Poynor <toddpoynor@google.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: Add SMP support for OMAP4+Russell King1-10/+71
On OMAP SMP configuartion, both processors share the voltage and clock. So both CPUs needs to be scaled together and hence needs software co-ordination. Also, update lpj with reference value to avoid progressive error. Adjust _both_ the per-cpu loops_per_jiffy and global lpj. Calibrate them with with reference to the initial values to avoid a progressively bigger and bigger error in the value over time. While at this, re-use the notifiers for UP/SMP since on UP machine or UP_ON_SMP policy->cpus mask would contain only the boot CPU. Based on initial SMP support by Santosh Shilimkar. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [khilman@ti.com: due to overlap/rework, combined original Santosh patch and Russell's rework] Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08cpufreq: OMAP: cleanup for multi-SoC support, move into drivers/cpufreqSantosh Shilimkar3-27/+44
Move OMAP cpufreq driver from arch/arm/mach-omap2 into drivers/cpufreq, along with a few cleanups: - generalize support for better handling of different SoCs in the OMAP - use OPP layer instead of OMAP clock internals for frequency table init Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [khilman@ti.com: move to drivers] Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-11-08Linux 3.2-rc1v3.2-rc1Linus Torvalds1-3/+3
.. with new name. Because nothing says "really solid kernel release" like naming it after an extinct animal that just happened to be in the news lately.
2011-11-08Merge branch 'fixes' of ↵Linus Torvalds42-402/+345
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits) ARM: OMAP: Fix export.h or module.h includes ARM: OMAP: omap_device: Include linux/export.h ARM: OMAP2: Fix H4 matrix keyboard warning ARM: OMAP1: Remove unused omap-alsa.h ARM: OMAP1: Fix warnings about enabling 32 KiHz timer ARM: OMAP2+: timer: Remove omap_device_pm_latency ARM: OMAP2+: clock data: Remove redundant timer clkdev ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio ARM: OMAP: usb: musb: OMAP: Delete unused function MAINTAINERS: Update linux-omap git repository ARM: OMAP: change get_context_loss_count ret value to int ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success ARM: OMAP: dmtimer: Include linux/module.h ARM: OMAP2+: l3-noc: Include linux/module.h ARM: OMAP2+: devices: Fixes for McPDM ARM: OMAP: Fix errors and warnings when building for one board ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only ...
2011-11-08VFS: we need to set LOOKUP_JUMPED on mountpoint crossingAl Viro1-1/+15
Mountpoint crossing is similar to following procfs symlinks - we do not get ->d_revalidate() called for dentry we have arrived at, with unpleasant consequences for NFS4. Simple way to reproduce the problem in mainline: cat >/tmp/a.c <<'EOF' #include <unistd.h> #include <fcntl.h> #include <stdio.h> main() { struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1}; if (fcntl(0, F_SETLK, &fl)) perror("setlk"); } EOF cc /tmp/a.c -o /tmp/test then on nfs4: mount --bind file1 file2 /tmp/test < file1 # ok /tmp/test < file2 # spews "setlk: No locks available"... What happens is the missing call of ->d_revalidate() after mountpoint crossing and that's where NFS4 would issue OPEN request to server. The fix is simple - treat mountpoint crossing the same way we deal with following procfs-style symlinks. I.e. set LOOKUP_JUMPED... Cc: stable@kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-08Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds31-288/+624
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Fix live annotation in the --stdio interface perf top tui: Don't recalc column widths considering just the first page perf report: Add progress bar when processing time ordered events perf hists browser: Warn about lost events perf tools: Fix a typo of command name as trace-cmd perf hists: Fix recalculation of total_period when sorting entries perf header: Fix build on old systems perf ui browser: Handle K_RESIZE in dialog windows perf ui browser: No need to switch char sets that often perf hists browser: Use K_TIMER perf ui: Rename ui__warning_paranoid to ui__error_paranoid perf ui: Reimplement the popup windows using libslang perf ui: Reimplement ui__popup_menu using ui__browser perf ui: Reimplement ui_helpline using libslang perf ui: Improve handling sigwinch a bit perf ui progress: Reimplement using slang perf evlist: Fix grouping of multiple events
2011-11-08Merge branch 'fixes-modulesplit' into fixesTony Lindgren3863-39041/+82624
2011-11-08ARM: OMAP: Fix export.h or module.h includesTony Lindgren4-0/+4
Commit 32aaeffbd4a7457bf2f7448b33b5946ff2a960eb (Merge branch 'modsplit-Oct31_2011'...) caused some build errors. Fix these and make sure we always have export.h or module.h included for MODULE_ and EXPORT_SYMBOL users: $ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \ grep -L linux/module.h arch/arm/mach-omap2/dsp.c arch/arm/mach-omap2/mailbox.c arch/arm/mach-omap2/omap-iommu.c arch/arm/mach-omap2/smartreflex.c Also check we either have export.h or module.h included for the files exporting symbols: $ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \ grep -L linux/export.h | xargs grep -L linux/module.h Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-08ARM: OMAP: omap_device: Include linux/export.hAxel Lin1-0/+1
Include linux/export.h to fix below build warning: CC arch/arm/plat-omap/omap_device.o arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds43-267/+325
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07vfs: d_invalidate() should leave mountpoints aloneAl Viro1-2/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07forcedeth: fix a few sparse warnings (variable shadowing)david decotigny1-17/+17
This fixes the following sparse warnings: drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Improve stats countersMandeep Baines1-0/+4
Rx byte count was off; instead use the hardware's count. Tx packet count was counting pre-TSO packets; instead count on-the-wire packets. Report hardware dropped frame count as rx_fifo_errors. - The count of transmitted packets reported by the forcedeth driver reports pre-TSO (TCP Segmentation Offload) packet counts and not the count of the number of packets sent on the wire. This change fixes the forcedeth driver to report the correct count. Fixed the code by copying the count stored in the NIC H/W to the value reported by the driver. - Count rx_drop_frame errors as rx_fifo_errors: We see a lot of rx_drop_frame errors if we disable the rx bottom-halves for too long. Normally, rx_fifo_errors would be counted in this case. The rx_drop_frame error count is private to forcedeth and is not reported by ifconfig or sysfs. The rx_fifo_errors count is currently unused in the forcedeth driver. It is reported by ifconfig as overruns. This change reports rx_drop_frame errors as rx_fifo_errors. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: remove unneeded stats updatesdavid decotigny1-34/+1
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: Acknowledge only interrupts that are being processedMike Ditto1-5/+8
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07forcedeth: fix race when unloading moduledavid decotigny1-1/+1
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by: David Decotigny <david.decotigny@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07device-mapper: using EXPORT_SYBOL in dm-space-map-checker.c needs export.hStephen Rothwell1-0/+1
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07device-mapper: dm-bufio.c needs to include module.hStephen Rothwell1-0/+1
since it uses the module facilities. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07drivers/md: change module.h -> export.h in persistent-data/dm-*Paul Gortmaker4-4/+4
For the files which are not themselves modular, we can change them to include only the smaller export.h since all they are doing is looking for EXPORT_SYMBOL. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07arm: Add export.h to recently added files for EXPORT_SYMBOLPaul Gortmaker2-0/+2
These files didn't exist at the time of the module.h split, and so were not fixed by the commits on that baseline. Since they use the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the new export.h file included that provides them. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07MAINTAINERS/rds: update maintainer Or Gerlitz1-1/+1
update for the actual maintainer Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07wanrouter: Remove kernel_lock annotationsRichard Weinberger1-2/+0
The BKL is gone, these annotations are useless. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07usbnet: fix oops in usbnet_start_xmitKonstantin Khlebnikov1-1/+2
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07ixgbe: Fix compile for kernel without CONFIG_PCI_IOV definedRose, Gregory V2-2/+4
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07Merge branch 'release' of ↵Linus Torvalds28-412/+729
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: cpuidle: Single/Global registration of idle states cpuidle: Split cpuidle_state structure and move per-cpu statistics fields cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare() cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning ACPI: Export FADT pm_profile integer value to userspace thermal: Prevent polling from happening during system suspend ACPI: Drop ACPI_NO_HARDWARE_INIT ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast() PNPACPI: Simplify disabled resource registration ACPI: Fix possible recursive locking in hwregs.c ACPI: use kstrdup() mrst pmu: update comment tools/power turbostat: less verbose debugging
2011-11-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds33-2657/+2948
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits) vmwgfx: Snoop DMA transfers with non-covering sizes vmwgfx: Move the prefered mode first in the list vmwgfx: Unreference surface on cursor error path vmwgfx: Free prefered mode on error path vmwgfx: Use pointer return error codes vmwgfx: Fix hw cursor position vmwgfx: Infrastructure for explicit placement vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh vmwgfx: Remove screen object active list vmwgfx: Screen object cleanups drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2 drm/radeon/kms: don't poll forever if MC GDDR link training fails drm/radeon/kms: fix DP setup on TRAVIS bridges drm/radeon/kms: set HPD polarity in hpd_init() drm/radeon/kms: add MSI module parameter drm/radeon/kms: Add MSI quirk for Dell RS690 drm/radeon/kms: Add MSI quirk for HP RS690 drm/radeon/kms: split MSI check into a separate function vmwgfx: Reinstate the update_layout ioctl drm/radeon/kms: always do extended edid probe ...
2011-11-07Merge branch 'urgent-for-linus' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux * 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: fix uninitialized task_ratelimit
2011-11-07Merge git://git.samba.org/sfrench/cifs-2.6Linus Torvalds1-55/+50
* git://git.samba.org/sfrench/cifs-2.6: CIFS: Cleanup byte-range locking code style CIFS: Simplify setlk error handling for mandatory locking
2011-11-07Merge git://git.infradead.org/mtd-2.6Linus Torvalds190-4046/+7583
* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.
2011-11-07Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6Linus Torvalds4-2/+23
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix the dark space calculation UBIFS: introduce a helper to dump scanning info
2011-11-07vmwgfx: Snoop DMA transfers with non-covering sizesJakob Bornecrantz1-9/+21
Enough to get cursors working under Wayland. Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Move the prefered mode first in the listJakob Bornecrantz1-0/+4
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Unreference surface on cursor error pathJakob Bornecrantz1-0/+1
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Free prefered mode on error pathJakob Bornecrantz1-6/+11
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Use pointer return error codesJakob Bornecrantz1-1/+1
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Fix hw cursor positionThomas Hellstrom1-2/+5
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Infrastructure for explicit placementThomas Hellstrom3-24/+30
Make it possible to use explicit placement (although not hooked up with a user-space interface yet) and relax the single framebuffer limit to only apply to implicit placement. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Make the preferred autofit mode have a 60Hz vrefreshThomas Hellstrom1-1/+23
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Remove screen object active listThomas Hellstrom1-37/+15
It isn't used for anything. Replace with an active bool. Also make a couple of functions return void instead of int since their return value wasn't checked anyway. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakbo Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07vmwgfx: Screen object cleanupsThomas Hellstrom1-14/+2
Remove unused member. No need to pin / unpin fb. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-07writeback: fix uninitialized task_ratelimitWu Fengguang1-4/+4
In balance_dirty_pages() task_ratelimit may be not initialized (initialization skiped by goto pause), and then used when calling tracing hook. Fix it by moving the task_ratelimit assignment before goto pause. Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
2011-11-07Revert "hvc_console: display printk messages on console."Linus Torvalds1-6/+1
This reverts commit 361162459f62dc0826b82c9690a741a940f457f0. It causes an infinite loop when booting Linux under Xen, as so: [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled [ 2.382984] console [hvc0] enabled ... as reported by Konrad Rzeszutek Wilk. And Rusty reports the same for lguest. He goes on to say: "This is not a concurrency problem: the issue seems to be that calling register_console() twice on the same struct console is a bad idea." and Greg says he'll fix it up properly at some point later. Revert for now. Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: Rusty Russell <rusty@ozlabs.org> Requested-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Miche Baker-Harvey <miche@google.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07powerpc: fix building hvc_opal.cMichael Neuling1-0/+1
Fix building following build error: drivers/tty/hvc/hvc_opal.c:244:12: error: 'THIS_MODULE' undeclared here (not in a function) Signed-off-by: Michael Neuling <mikey@neuling.org> [ New file from powerpc tree not following the new rules from the module.h split, both of which were merged today. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-07Merge branch 'upstream/jump-label-noearly' of ↵Linus Torvalds6-59/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/jump-label-noearly' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: jump-label: initialize jump-label subsystem much earlier x86/jump_label: add arch_jump_label_transform_static() s390/jump-label: add arch_jump_label_transform_static() jump_label: add arch_jump_label_transform_static() to optimise non-live code updates sparc/jump_label: drop arch_jump_label_text_poke_early() x86/jump_label: drop arch_jump_label_text_poke_early() jump_label: if a key has already been initialized, don't nop it out stop_machine: make stop_machine safe and efficient to call early jump_label: use proper atomic_t initializer Conflicts: - arch/x86/kernel/jump_label.c Added __init_or_module to arch_jump_label_text_poke_early vs removal of that function entirely - kernel/stop_machine.c same patch ("stop_machine: make stop_machine safe and efficient to call early") merged twice, with whitespace fix in one version
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 19:40:25 +0300