| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When the device file "/dev/isst_interface" is not present, instead of
failing on access, check at the start and print a helpful warning.
Here CLX platform is an exception, which doesn't depend on the device
file. So continue for CLX platform.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Once the CPU is offline, the topology information (core-id, package-id,
die-id) is not accessible via sysfs. So when user selects a config level
more than base config 0 and offlined CPUs to match the config level,
to return to base config he has to manually online CPUs before. Without
this CPUs information mapping from Punit CPU numbering will lot work
as it needs atlest package id for each CPU.
To avoid this additional steps store the topology information in a file
, which is created on the very first run after boot. Since system boots
in base config and all CPUs are online, we can get information about
every CPU.
Once any of the APIs like get_physical_package_id(),
get_physical_core_id() or get_physical_die_id() fails to read from
sysfs, read from the stored mapping file.
This mapping file is stored in /tmp file system. so on every boot
it is recreated to make sure that any new CPUs are added to the
system before boot are taken into account.
But don't use the stored physical device id when trying to get
information for CPU to send message in for_each_online_package_in_set().
Here use the real value from syfs and in case fails try the next CPU.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
offline
Currently /sys/devices/system/cpu/cpu0/topology/thread_siblings is used to
get the max CPU count. But when CPU0 is offline, then this file will be
absent.
So add processing so that we can get count from any first CPU in the
system. which is online.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When "-o" option for force online/offline is used with command:
perf-profile set-config-level
If the config level calls for CPU 0 online/offline, then call fails
as there is special kernel setup required for CPU 0 online/offline
and the currently not setup for that.
But when call is for online CPU 0, then don't fail. Just warn that
this system is not setup for CPU 0 online/offline.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Instead of displaying 0 and 1 for enable status, display "disabled"
and "enabled" respectively.
Similarly for priority type, display "ordered or proportional" instead
of 0 and 1.
An example display:
$intel-speed-select -c 1 core-power info
Intel(R) Speed Select Technology
..
package-0
die-0
cpu-1
core-power
support-status:supported
enable-status:enabled
clos-enable-status:enabled
priority-type:proportional
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
In addition to CLOS enable status, also show the core-power feature
status. This will help why clos enable status didn't give desired
results as the core-power feature may be disabled or unsupported.
The new display looks as follows:
$intel-speed-select core-power info
Intel(R) Speed Select Technology
..
package-0
die-0
cpu-0
core-power
support-status:supported
enable-status:enabled
clos-enable-status:1
priority-type:0
In the above display "support-status" and "enable-status", shows the
status of the core-power feature and "clos-enable-status", shows the
status of the clos.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Currently "-c" is a mandatory option for "core-power info" command. Make
this optional as this is a per package/die property. When not specified,
it will print info for every package/die.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When CPU is offline, we can't get package id. So print error for this
and don't use output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Here topology_max_cpus is used for total CPU count, not the last CPU
number. So remove "-1".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Even for the products using MMIO, this message needs to be sent via
mail box. The previous fix done for this didn't properly address this.
That fix simply removed sending command via MMIO, but still didn't
trigger sending via mailbox.
Add additional condition to check for CLOS_PM_QOS_CONFIG, when MMIO
is supported on a platform.
Fixes: cd0e63706549 (tools/power/x86/intel-speed-select: Use mailbox for CLOS_PM_QOS_CONFIG)
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
range
Commit 1f27dbd8265d ("platform/x86: GPD pocket fan: Allow somewhat
lower/higher temperature limits") changed the module-param sanity check
to accept temperature limits between 20 and 90 degrees celcius.
But the error message printed when the module params are outside this
range was not updated. This commit updates the error message to match
the new min and max value for the temp-limits.
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The MMIO driver is not unregistering with the correct type with the ISST
common core during module removal. This should be unregistered with
ISST_IF_DEV_MMIO instead of ISST_IF_DEV_MBOX.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Function fan_boost_mode_store returns 0 if store is successful,
this leads to infinite loop after any write to it's sysfs entry:
# echo 0 >/sys/devices/platform/asus-nb-wmi/fan_boost_mode
This command never ends, one CPU core is at 100% utilization.
This patch fixes this by returning size of written data.
Fixes: b096f626a682 ("platform/x86: asus-wmi: Switch fan boost mode")
Signed-off-by: Leonid Maksymchuk <leonmaxx@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The WMI method to set the charge threshold does not provide a
way to specific a battery, so we assume it is the first/primary
battery (by checking if the name is BAT0).
On some newer ASUS laptops (Zenbook UM431DA) though, the
primary/first battery isn't named BAT0 but BATT, so we need
to support that case.
Fixes: 7973353e92ee ("platform/x86: asus-wmi: Refactor charge threshold to use the battery hooking API")
Cc: stable@vger.kernel.org
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
'paramaters' should be 'parameters'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
flexible-array member
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
On module unload wait for relese callback for each packag_die entry
and then free the memory. This is done by waiting on a completion
object, till release() callback.
While here, also change to kobject_init_and_add() to
kobject_create_and_add() to simplify.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
condition
There is a possible race condition when:
All CPUs in a package is offlined and just before the last CPU offline,
user tries to read sysfs entry and read happens while offline callback
is about to delete the sysfs entry.
Although not reproduced but this is possible scenerio and can be
reproduced by adding a msleep() in the show_min_max_freq_khz() before
mutex_lock() and read min_freq attribute from user space. Before
msleep() finishes, force every CPUs in a package offline.
This will cause deadlock, with offline and sysfs read/write operation
because of mutex_lock. The uncore_remove_die_entry() will not release
mutex till read/write callback returns because of kobject_put() and
read/write callback waiting on mutex.
We don't have to remove the sysfs folder when the package is offline.
While there is no CPU present, we can fail the read/write calls by
returning ENXIO error. So remove the kobject_put() call in offline path.
This also address the warning from static checker, as there is no
access to "data" variable after kobject_put:
"The patch 49a474c7ba51: "platform/x86: Add support for Uncore
frequency control" from Jan 13, 2020, leads to the following static
checker warning:
drivers/platform/x86/intel-uncore-frequency.c:285 uncore_remove_die_entry()
error: dereferencing freed memory 'data'
"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If platforms such as Tiger Lake has sub-states of S0ix, then attributes
such as slps0_dbg_offset become invalid. But slp_s0_offset is still
valid as it is used to get the pmcdev_base_addr.
Hence, add back slp_s0_offset and remove slps0_dbg_offset attributes.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
A debugfs entry for substate_live_status_registers is created only if
the platform has sub-states, which requires the same condition to create
substate_status_registers debugfs entry. Hence remove the redundant
condition and re-use the existing one.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
CONFIG_DEBUG_FS
Since pmc_core_slps0_display() and pmc_core_lpm_display() is responsible for
dumping as well as displaying debug registers, there is no need for these
two functions to be defined under CONFIG_DEBUG_FS.
Hence, relocate these functions from under CONFIG_DEBUG_FS to above the block.
Cc: Chen Zhou <chenzhou10@huawei.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
registers
Just like status registers, Tiger Lake has another set of 6 registers
that help with status of the low power mode requirements. They are
latched on every PC10 entry/exit and S0ix.y entry/exit as well.
Though status and live status registers show the status of same list
of requirements, live status registers show the status of the low power
mode requirements at the time of reading.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
failure
Platforms prior to Tiger Lake has no sub-states of S0ix and accessing
device PM states that are latched whenever there is a PC10 entry is
possible with the help of slp_s0_debug_status and slp_s0_dbg_latch
debugfs entries.
If a platform has sub-states of S0ix, no such entries are created.
Hence, dump low power status registers on resume When any attempt to
enter any low power state was unsuccessful.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
pmc_core_lpm_display()
Add a device pointer of type struct device as an additional parameter to
pmc_core_lpm_display(), so that the driver can re-use it to dump the
debug registers in resume for an S0ix failure.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
If platforms such as Tiger Lake has sub-states of S0ix, then both
slp_s0_debug_status and slp_s0_dbg_latch entries become invalid. Thus,
remove slp_s0_offset and slp_s0_dbg_maps attributes from tgl_reg_map, so
that both the entries are not created.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
pmc_core_slps0_dbg_show() is responsible for displaying debug registers
through slp_s0_debug_status entry. The driver uses the same but
redundant code to dump these debug registers for an S0ix failure.
Hence, refactor the driver by removing redundant code and reuse the
same function that both dumps registers through slp_s0_debug_status
entry and in resume for an S0ix failure.
The changes in this patch are preparatory, so platforms that support low
power sub-states can dump the debug registers when the attempt to enter
low power states are unsuccessful.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
registers
Tiger Lake has 6 status registers that are memory mapped. These
registers show the status of the low power mode requirements. The
registers are latched on every C10 entry or exit and on every s0ix.y
entry/exit. Accessing these registers is useful for debugging any low
power related activities.
Thus, add debugfs entry to access low power mode status registers.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Prior to Tiger Lake, the platforms that support pmc_core have no
sub-states of S0ix. Tiger Lake has 8 sub-states/low power modes of S0ix
ranging from S0i2.0-S0i2.2 and S0i3.0-S0i3.4, simply represented as
S0ix.y.
Create a debugfs entry to access residency of each sub-state.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The Lex 2I385SW board has two Intel I211 ethernet controllers. Without
this patch, only the first port is usable. The second port fails to
start with the following message:
igb: probe of 0000:02:00.0 failed with error -2
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Georg Müller <georgmueller@gmx.net>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For the command
"intel-speed-select perf-profile info":
There are two instances of “speed-select-turbo-freq” underneath
“perf-profile-level-0” for each package. When we load the output into
python with json.load(), the second instance overwrites the first.
Result is that we can only access:
"speed-select-turbo-freq": {
"bucket-0": {
"high-priority-cores-count": "2",
"high-priority-max-frequency(MHz)": "3000",
"high-priority-max-avx2-frequency(MHz)": "2800",
"high-priority-max-avx512-frequency(MHz)": "2600"
},
Because it is a duplicate of "speed-select-turbo-freq": "disabled"
Same is true for "speed-select-base-freq".
To avoid this add "-properties" suffix for the second instance to
differentiate.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
When mailbox command for the turbo-freq enable fails, then don't display
result for auto-mode. When turbo-freq enable fails, there is no point
to set CPU priorities.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Here we do:
- unify all message to have module name prefix via pr_fmt()
- replace printk(LEVEL ... ) with pr_level(...)
- drop __func__ from messages
- join string literals to be on one line
- drop trailing periods and spaces
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
There is no need to cast both values in max_t() macro, so, use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The code looks more nicer if we use:
while (idx--)
instead:
for (;idx>0;idx--)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The loop declaration in packet_read_list() and packet_empty_list()
can be simplified by reusing the common list_for_each_entry*()
helper macros.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Use sysfs_create_group() API instead of open coded variant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For better maintenance group modules by companies and functions.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
For better maintenance group modules by companies and functions.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Move MODULE_DEVICE_TABLE() closer to the table for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Move MODULE_DEVICE_TABLE() closer to the table for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Add Jasper Lake to the list of the platforms that intel_pmc_core
driver supports for pmc_core device.
Just like Ice Lake, Tiger Lake and Elkhart Lake, Jasper Lake can also
reuse all the Cannon Lake PCH IPs. Also, it uses the same PCH IPs of
Tiger Lake, no additional effort is needed to enable but to simply reuse
them.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Run parse-maintainers.pl and choose PDx86 records. Fix them accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix randconfig to generate a sane .config
- rename hostprogs-y / always to hostprogs / always-y, which are more
natual syntax.
- optimize scripts/kallsyms
- fix yes2modconfig and mod2yesconfig
- make multiple directory targets ('make foo/ bar/') work
* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: make multiple directory targets work
kconfig: Invalidate all symbols after changing to y or m.
kallsyms: fix type of kallsyms_token_table[]
scripts/kallsyms: change table to store (strcut sym_entry *)
scripts/kallsyms: rename local variables in read_symbol()
kbuild: rename hostprogs-y/always to hostprogs/always-y
kbuild: fix the document to use extra-y for vmlinux.lds
kconfig: fix broken dependency in randconfig-generated .config
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull new zonefs file system from Damien Le Moal:
"Zonefs is a very simple file system exposing each zone of a zoned
block device as a file.
Unlike a regular file system with native zoned block device support
(e.g. f2fs or the on-going btrfs effort), zonefs does not hide the
sequential write constraint of zoned block devices to the user. As a
result, zonefs is not a POSIX compliant file system. Its goal is to
simplify the implementation of zoned block devices support in
applications by replacing raw block device file accesses with a richer
file based API, avoiding relying on direct block device file ioctls
which may be more obscure to developers.
One example of this approach is the implementation of LSM
(log-structured merge) tree structures (such as used in RocksDB and
LevelDB) on zoned block devices by allowing SSTables to be stored in a
zone file similarly to a regular file system rather than as a range of
sectors of a zoned device. The introduction of the higher level
construct "one file is one zone" can help reducing the amount of
changes needed in the application while at the same time allowing the
use of zoned block devices with various programming languages other
than C.
Zonefs IO management implementation uses the new iomap generic code.
Zonefs has been successfully tested using a functional test suite
(available with zonefs userland format tool on github) and a prototype
implementation of LevelDB on top of zonefs"
* tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Add documentation
fs: New zonefs file system
|
|
In order to allow the GICv4 code to link properly on 32bit ARM,
make sure we don't use 64bit divisions when it isn't strictly
necessary.
Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull cifs fixes from Steve French:
"13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week:
- Important fix for multichannel and for modefromsid mounts.
- Two reconnect fixes
- Addition of SMB3 change notify support
- Backup tools fix
- A few additional minor debug improvements (tracepoints and
additional logging found useful during testing this week)"
* tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add defines for new information level, FileIdInformation
smb3: print warning once if posix context returned on open
smb3: add one more dynamic tracepoint missing from strict fsync path
cifs: fix mode bits from dir listing when mounted with modefromsid
cifs: fix channel signing
cifs: add SMB3 change notification support
cifs: make multichannel warning more visible
cifs: fix soft mounts hanging in the reconnect code
cifs: Add tracepoints for errors on flush or fsync
cifs: log warning message (once) if out of disk space
cifs: fail i/o on soft mounts if sessionsetup errors out
smb3: fix problem with null cifs super block with previous patch
SMB3: Backup intent flag missing from some more ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vboxfs from Al Viro:
"This is the VirtualBox guest shared folder support by Hans de Goede,
with fixups for fs_parse folded in to avoid bisection hazards from
those API changes..."
* 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Add VirtualBox guest shared folder (vboxsf) support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for X86:
- Ensure that the PIT is set up when the local APIC is disable or
configured in legacy mode. This is caused by an ordering issue
introduced in the recent changes which skip PIT initialization when
the TSC and APIC frequencies are already known.
- Handle malformed SRAT tables during early ACPI parsing which caused
an infinite loop anda boot hang.
- Fix a long standing race in the affinity setting code which affects
PCI devices with non-maskable MSI interrupts. The problem is caused
by the non-atomic writes of the MSI address (destination APIC id)
and data (vector) fields which the device uses to construct the MSI
message. The non-atomic writes are mandated by PCI.
If both fields change and the device raises an interrupt after
writing address and before writing data, then the MSI block
constructs a inconsistent message which causes interrupts to be
lost and subsequent malfunction of the device.
The fix is to redirect the interrupt to the new vector on the
current CPU first and then switch it over to the new target CPU.
This allows to observe an eventually raised interrupt in the
transitional stage (old CPU, new vector) to be observed in the APIC
IRR and retriggered on the new target CPU and the new vector.
The potential spurious interrupts caused by this are harmless and
can in the worst case expose a buggy driver (all handlers have to
be able to deal with spurious interrupts as they can and do happen
for various reasons).
- Add the missing suspend/resume mechanism for the HYPERV hypercall
page which prevents resume hibernation on HYPERV guests. This
change got lost before the merge window.
- Mask the IOAPIC before disabling the local APIC to prevent
potentially stale IOAPIC remote IRR bits which cause stale
interrupt lines after resume"
* tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Mask IOAPIC entries when disabling the local APIC
x86/hyperv: Suspend/resume the hypercall page for hibernation
x86/apic/msi: Plug non-maskable MSI affinity race
x86/boot: Handle malformed SRAT tables during early ACPI parsing
x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode
|
