| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's not helpful if every driver has to cook its own. Generalize
xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which
shouldn't have expanded to zero to begin with). Use the constants in
p2m.c and gntdev.c right away, and update field types where necessary so
they would match with the constants' types (albeit without touching
struct ioctl_gntdev_grant_ref's ref field, as that's part of the public
interface of the kernel and would require introducing a dependency on
Xen's grant_table.h public header).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
They're needed only in the not-auto-translate (i.e. PV) case; there's no
point in allocating memory that's never going to get accessed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/180d50cb-5531-8952-4bf0-d65c554638ed@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
They're only used internally, and the layering violation they contain
(x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly
advise against any (uncontrolled) use from a module. The functions also
never had users except the ones from drivers/xen/grant-table.c forever
since their introduction in 3.15.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/746a5cd6-1446-eda4-8b23-03c1cac30b8d@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
When changing the cpu affinity of an event it can happen today that
(with some unlucky timing) the same event will be handled on the old
and the new cpu at the same time.
Avoid that by adding an "event active" flag to the per-event data and
call the handler only if this flag isn't set.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Link: https://lore.kernel.org/r/20210306161833.4552-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
An event channel should be kept masked when an eoi is pending for it.
When being migrated to another cpu it might be unmasked, though.
In order to avoid this keep three different flags for each event channel
to be able to distinguish "normal" masking/unmasking from eoi related
masking/unmasking and temporary masking. The event channel should only
be able to generate an interrupt if all flags are cleared.
Cc: stable@vger.kernel.org
Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20210306161833.4552-3-jgross@suse.com
[boris -- corrected Fixed tag format]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
When creating a new event channel with 2-level events the affinity
needs to be reset initially in order to avoid using an old affinity
from earlier usage of the event channel port. So when tearing an event
channel down reset all affinity bits.
The same applies to the affinity when onlining a vcpu: all old
affinity settings for this vcpu must be reset. As percpu events get
initialized before the percpu event channel hook is called,
resetting of the affinities happens after offlining a vcpu (this is
working, as initial percpu memory is zeroed out).
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Link: https://lore.kernel.org/r/20210306161833.4552-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Commit 3194a1746e8a ("xen-netback: don't "handle" error by BUG()")
dropped respective a BUG_ON() without noticing that with this the
variable's value wouldn't be consumed anymore. With gnttab_set_map_op()
setting all status fields to a non-zero value, in case of an error no
slot should have a status of GNTST_okay (zero).
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/d933f495-619a-0086-5fb4-1ec3cf81a8fc@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In order for subsequent unmapping to not mistakenly unmap handle 0,
record a perceived always-invalid one instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://lore.kernel.org/r/82414b0f-1b63-5509-7c1d-5bcc8239a3de@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
As started by commit 05a5f51ca566 ("Documentation: Replace lkml.org
links with lore"), replace lkml.org links with lore to better use a
single source that's more likely to stay available long-term.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210210234618.2734785-1-keescook@chromium.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
For avoiding read- and write-tearing by the compiler use READ_ONCE()
and WRITE_ONCE() for accessing the ring indices in evtchn.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210219154030.10892-9-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The ring buffer for user events is local to the given kernel instance,
so smp barriers are fine for ensuring consistency.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20210219154030.10892-8-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Add syfs nodes for each xenbus device showing event statistics (number
of events and spurious events, number of associated event channels)
and for setting a spurious event threshold in case a frontend is
sending too many events without being rogue on purpose.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210219154030.10892-7-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
"Here are a few additional NFSD commits for the merge window:
Optimization:
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat"
* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Further clean up svc_tcp_sendmsg()
SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
SUNRPC: Use TCP_CORK to optimise send performance on the server
svcrdma: Hold private mutex while invoking rdma_accept()
nfsd: register pernet ops last, unregister first
|
|
Pull ceph updates from Ilya Dryomov:
"With netfs helper library and fscache rework delayed, just a few cap
handling improvements to avoid grabbing mmap_lock in some code paths
and deal with capsnaps better and a mount option cleanup"
* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
ceph: defer flushing the capsnap if the Fb is used
libceph: remove osdtimeout option entirely
libceph: deprecate [no]cephx_require_signatures options
ceph: allow queueing cap/snap handling after putting cap references
ceph: clean up inode work queueing
ceph: fix flush_snap logic after putting caps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs, udf, and quota updates from Jan Kara:
"Several udf, isofs, and quota fixes"
* tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
parser: Fix kernel-doc markups
udf: handle large user and group ID
isofs: handle large user and group ID
parser: add unsigned int parser
udf: fix silent AED tagLocation corruption
isofs: release buffer head before return
quota: Fix memory leak when handling corrupted quota file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify update from Jan Kara:
"Make inotify groups be charged against appropriate memcgs"
* tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify, memcg: account inotify instances to kmemcg
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull lazytime updates from Jan Kara:
"Cleanups of the lazytime handling in the writeback code making rules
for calling ->dirty_inode() filesystem handlers saner"
* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: simplify i_state checks in __ext4_update_other_inode_time()
gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
fs: improve comments for writeback_single_inode()
fs: drop redundant check from __writeback_single_inode()
fs: clean up __mark_inode_dirty() a bit
fs: pass only I_DIRTY_INODE flags to ->dirty_inode
fs: don't call ->dirty_inode for lazytime timestamp updates
fat: only specify I_DIRTY_TIME when needed in fat_update_time()
fs: only specify I_DIRTY_TIME when needed in generic_update_time()
fs: correctly document the inode dirty flags
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- improve file deletion performance with dirsync mount option
- fix shift-out-of-bounds in exfat_fill_super() reported by syzkaller
* tag 'exfat-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: improve performance of exfat_free_cluster when using dirsync mount option
exfat: fix shift-out-of-bounds in exfat_fill_super()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
"Two changes:
- A fix that did not make it in time for 5.11, to correct the file
size initialization of full sequential zone, from Shin'ichiro
- Add file operation tracepoints to help with debugging, from
Johannes"
* tag 'zonefs-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix file size of zones in full condition
zonefs: add tracepoints for file operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull RCU-safe common_lsm_audit() from Al Viro:
"Make common_lsm_audit() non-blocking and usable from RCU pathwalk
context.
We don't really need to grab/drop dentry in there - rcu_read_lock() is
enough. There's a couple of followups using that to simplify the
logics in selinux, but those hadn't soaked in -next yet, so they'll
have to go in next window"
* 'work.audit' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make dump_common_audit_data() safe to be called from RCU pathwalk
new helper: d_find_alias_rcu()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull d_name whack-a-mole from Al Viro:
"A bunch of places that play with ->d_name in printks instead of using
proper formats..."
* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs_file_mmap(): use %pD
cifs_debug: use %pd instead of messing with ->d_name
erofs: use %pd instead of messing with ->d_name
cramfs: use %pD instead of messing with file_dentry()->d_name
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock update from Mike Rapoport:
"Remove return value of memblock_free_all()
memblock_free_all() returns the total count of freed pages and its
callers used this value to update totalram_pages. This update is now
anyway a part of memblock_free_all() and its callers no longer check
the return value, so make memblock_free_all() void"
* tag 'memblock-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: memblock: remove return value of memblock_free_all()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Another fairly small set of changes of changes this cycle. The most
significant functional change is a fix to better manage the flags when
allocating memory.
Additionally there is the removal of some unused code (which is
slightly more dramatic than it sounds given it means there are now no
tasklets in kgdb) together with a tidy up of the debug prints and some
spelling corrections for the documentation"
* tag 'kgdb-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: Remove kgdb_schedule_breakpoint()
kdb: Make memory allocations more robust
kdb: kdb_support: Fix debugging information problem
kernel: debug: fix typo issue
kgdb: rectify kernel-doc for kgdb_unregister_io_module()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Practical information how to implement reliable stacktraces needed by
the livepatching consistency model by Mark Rutland and Mark Brown.
- Automatically generated documentation contents by Mark Brown.
* tag 'livepatching-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
Documentation: livepatch: document reliable stacktrace
Documentation: livepatch: Convert to automatically generated contents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New "no_hash_pointers" kernel parameter causes that %p shows raw
pointer values instead of hashed ones. It is intended only for
debugging purposes. Misuse is prevented by a fat warning message that
is inspired by trace_printk().
- Prevent a possible deadlock when flushing printk_safe buffers during
panic().
- Fix performance regression caused by the lockless printk ringbuffer.
It was visible with huge log buffer and long messages.
- Documentation fix-up.
* tag 'printk-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: no_hash_pointers prints all addresses as unhashed
kselftest: add support for skipped tests
lib: use KSTM_MODULE_GLOBALS macro in kselftest drivers
printk: avoid prb_first_valid_seq() where possible
printk: fix deadlock when kernel panic
printk: rectify kernel-doc for prb_rec_init_wr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan
- support for filtering test suites using glob from Daniel Latypov.
"kunit_filter.glob" command line option is passed to the UML
kernel, which currently only supports filtering by suite name.
This support allows running different subsets of tests, e.g.
$ ./tools/testing/kunit/kunit.py build
$ ./tools/testing/kunit/kunit.py exec 'list*'
$ ./tools/testing/kunit/kunit.py exec 'kunit*'
- several fixes and cleanups also from Daniel Latypov.
* tag 'linux-kselftest-kunit-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix unintentional statefulness in run_kernel()
kunit: tool: add support for filtering suites by glob
kunit: add kunit.filter_glob cmdline option to filter suites
kunit: don't show `1 == 1` in failed assertion messages
kunit: make kunit_tool accept optional path to .kunitconfig fragment
Documentation: kunit: add tips.rst for small examples
KUnit: Docs: make start.rst example Kconfig follow style.rst
kunit: tool: simplify kconfig is_subset_of() logic
minor: kunit: tool: fix unit test so it can run from non-root dir
kunit: tool: use `with open()` in unit test
kunit: tool: stop using bare asserts in unit test
kunit: tool: fix unit test cleanup handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- dmabuf-heaps test fixes and cleanups from John Stultz
- seccomp test fix to accept any valid fd in user_notification_addfd
- Minor fixes to breakpoints and vDSO tests
- Minor code cleanups to ipc and x86 tests
* tag 'linux-kselftest-next-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/seccomp: Accept any valid fd in user_notification_addfd
selftests/timens: add futex binary to .gitignore
selftests: breakpoints: Use correct error messages in breakpoint_test_arm64.c
selftests/vDSO: fix ABI selftest on riscv
selftests/x86/ldt_gdt: remove unneeded semicolon
selftests/ipc: remove unneeded semicolon
kselftests: dmabuf-heaps: Add extra checking that allocated buffers are zeroed
kselftests: dmabuf-heaps: Cleanup test output
kselftests: dmabuf-heaps: Softly fail if don't find a vgem device
kselftests: dmabuf-heaps: Add clearer checks on DMABUF_BEGIN/END_SYNC
kselftests: dmabuf-heaps: Fix Makefile's inclusion of the kernel's usr/include dir
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
|
|
Pull block IPI updates from Jens Axboe:
"Avoid IRQ locking for the block IPI handling (Sebastian Andrzej
Siewior)"
* tag 'for-5.12/block-ipi-2021-02-21' of git://git.kernel.dk/linux-block:
blk-mq: Use llist_head for blk_cpu_done
blk-mq: Always complete remote completions requests in softirq
smp: Process pending softirqs in flush_smp_call_function_from_idle()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM SMMU and Mediatek updates from Will Deacon:
- Support for MT8192 IOMMU from Mediatek
- Arm v7s io-pgtable extensions for MT8192
- Removal of TLBI_ON_MAP quirk
- New Qualcomm compatible strings
- Allow SVA without hardware broadcast TLB maintenance on SMMUv3
- Virtualization Host Extension support for SMMUv3 (SVA)
- Allow SMMUv3 PMU perf driver to be built independently from IOMMU
- Some tidy-up in IOVA and core code
- Conversion of the AMD IOMMU code to use the generic IO-page-table
framework
- Intel VT-d updates from Lu Baolu:
- Audit capability consistency among different IOMMUs
- Add SATC reporting structure support
- Add iotlb_sync_map callback support
- SDHI support for Renesas IOMMU driver
- Misc cleanups and other small improvments
* tag 'iommu-updates-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (94 commits)
iommu/amd: Fix performance counter initialization
MAINTAINERS: repair file pattern in MEDIATEK IOMMU DRIVER
iommu/mediatek: Fix error code in probe()
iommu/mediatek: Fix unsigned domid comparison with less than zero
iommu/vt-d: Parse SATC reporting structure
iommu/vt-d: Add new enum value and structure for SATC
iommu/vt-d: Add iotlb_sync_map callback
iommu/vt-d: Move capability check code to cap_audit files
iommu/vt-d: Audit IOMMU Capabilities and add helper functions
iommu/vt-d: Fix 'physical' typos
iommu: Properly pass gfp_t in _iommu_map() to avoid atomic sleeping
iommu/vt-d: Fix compile error [-Werror=implicit-function-declaration]
driver/perf: Remove ARM_SMMU_V3_PMU dependency on ARM_SMMU_V3
MAINTAINERS: Add entry for MediaTek IOMMU
iommu/mediatek: Add mt8192 support
iommu/mediatek: Remove unnecessary check in attach_device
iommu/mediatek: Support master use iova over 32bit
iommu/mediatek: Add iova reserved function
iommu/mediatek: Support for multi domains
iommu/mediatek: Add get_domain_id from dev->dma_range_map
...
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, if not for Lee's 70 patches cleaning the
kdocs it would be well below typical for patch count.
Most of the interesting work here was in the HNS and rxe drivers which
got fairly major internal changes.
Summary:
- Driver updates and bug fixes: siw, hns, bnxt_re, mlx5, efa
- Significant rework in rxe to get it ready to have XRC support added
- Several rts bug fixes
- Big series to get to 'make W=1' cleanness, primarily updating kdocs
- Support for creating a RDMA MR from a DMABUF fd to allow PCI peer
to peer transfers to GPU VRAM
- Device disassociation now works properly with umad
- Work to support more than 255 ports on a RDMA device
- Further support for the new HNS HIP09 hardware
- Coding style cleanups: comma to semicolon, unneded semicolon/blank
lines, remove 'h' printk format, don't check for NULL before kfree,
use true/false for bool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (205 commits)
RDMA/rtrs-srv: Do not pass a valid pointer to PTR_ERR()
RDMA/srp: Fix support for unpopulated and unbalanced NUMA nodes
RDMA/mlx5: Fail QP creation if the device can not support the CQE TS
RDMA/mlx5: Allow CQ creation without attached EQs
RDMA/rtrs-srv-sysfs: fix missing put_device
RDMA/rtrs-srv: fix memory leak by missing kobject free
RDMA/rtrs: Only allow addition of path to an already established session
RDMA/rtrs-srv: Fix stack-out-of-bounds
RDMA/rxe: Remove unused pkt->offset
RDMA/ucma: Fix use-after-free bug in ucma_create_uevent
RDMA/core: Fix kernel doc warnings for ib_port_immutable_read()
RDMA/qedr: Use true and false for bool variable
RDMA/hns: Adjust definition of FRMR fields
RDMA/hns: Refactor process of posting CMDQ
RDMA/hns: Adjust fields and variables about CMDQ tail/head
RDMA/hns: Remove redundant operations on CMDQ
RDMA/hns: Fixes missing error code of CMDQ
RDMA/hns: Remove unused member and variable of CMDQ
RDMA/ipoib: Remove racy Subnet Manager sendonly join checks
RDMA/mlx5: Support 400Gbps IB rate in mlx5 driver
...
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, ibmvfc,
qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
is bound to cause conflicts with a trivial change somewhere).
The only big major rework of note is the one from Hannes trying to
clean up our result handling code in the drivers to make it
consistent"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
scsi: ufs: Give clk scaling min gear a value
scsi: lpfc: Fix 'physical' typos
scsi: megaraid_mbox: Fix spelling of 'allocated'
scsi: qla2xxx: Simplify the calculation of variables
scsi: message: fusion: Fix 'physical' typos
scsi: target: core: Change ASCQ for residual write
scsi: target: core: Signal WRITE residuals
scsi: target: core: Set residuals for 4Kn devices
scsi: hisi_sas: Add trace FIFO debugfs support
scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
scsi: hisi_sas: Enable debugfs support by default
scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
scsi: lpfc: Add auto select on IRQ_POLL
scsi: ncr53c8xx: Fix typos
scsi: lpfc: Fix ancient double free
scsi: qla2xxx: Fix some memory corruption
scsi: qla2xxx: Remove redundant NULL check
scsi: megaraid: Fix ifnullfree.cocci warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Fix DM integrity's HMAC support to provide enhanced security of
internal_hash and journal_mac capabilities.
- Various DM writecache fixes to address performance, fix table output
to match what was provided at table creation, fix writing beyond end
of device when shrinking underlying data device, and a couple other
small cleanups.
- Add DM crypt support for using trusted keys.
- Fix deadlock when swapping to DM crypt device by throttling number of
in-flight REQ_SWAP bios. Implemented in DM core so that other
bio-based targets can opt-in by setting ti->limit_swap_bios.
- Fix various inverted logic bugs in the .iterate_devices callout
functions that are used to assess if specific feature or capability
is supported across all devices being combined/stacked by DM.
- Fix DM era target bugs that exposed users to lost writes or memory
leaks.
- Add DM core support for passing through inline crypto support of
underlying devices. Includes block/keyslot-manager changes that
enable extending this support to DM.
- Various small fixes and cleanups (spelling fixes, front padding
calculation cleanup, cleanup conditional zoned support in targets,
etc).
* tag 'for-5.12/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (31 commits)
dm: fix deadlock when swapping to encrypted device
dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED
dm: set DM_TARGET_PASSES_CRYPTO feature for some targets
dm: support key eviction from keyslot managers of underlying devices
dm: add support for passing through inline crypto support
block/keyslot-manager: Introduce functions for device mapper support
block/keyslot-manager: Introduce passthrough keyslot manager
dm era: only resize metadata in preresume
dm era: Use correct value size in equality function of writeset tree
dm era: Fix bitset memory leaks
dm era: Verify the data block size hasn't changed
dm era: Reinitialize bitset cache before digesting a new writeset
dm era: Update in-core bitset after committing the metadata
dm era: Recover committed writeset after crash
dm writecache: use bdev_nr_sectors() instead of open-coded equivalent
dm writecache: fix writing beyond end of underlying device when shrinking
dm table: remove needless request_queue NULL pointer checks
dm table: fix zoned iterate_devices based device capability checks
dm table: fix DAX iterate_devices based device capability checks
dm table: fix iterate_devices based device capability checks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host
fdtoverlay
- Add kbuild support to build DT overlays (%.dtbo)
- Drop NULLifying match table in of_match_device().
In preparation for this, there are several driver cleanups to use
(of_)?device_get_match_data().
- Drop pointless wrappers from DT struct device API
- Convert USB binding schemas to use graph schema and remove old plain
text graph binding doc
- Convert spi-nor and v3d GPU bindings to DT schema
- Tree wide schema fixes for if/then schemas, array size constraints,
and undocumented compatible strings in examples
- Handle 'no-map' correctly for already reserved memblock regions
* tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
driver core: platform: Drop of_device_node_put() wrapper
of: Remove of_dev_{get,put}()
dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
dt-bindings: can: rcar_canfd: Group tuples in pin control properties
dt-bindings: power: renesas,apmu: Group tuples in cpus properties
dt-bindings: mtd: spi-nor: Convert to DT schema format
dt-bindings: Use portable sort for version cmp
dt-bindings: ethernet-controller: fix fixed-link specification
dt-bindings: irqchip: Add node name to PRUSS INTC
dt-bindings: interconnect: Fix the expected number of cells
dt-bindings: Fix errors in 'if' schemas
dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required
dt-bindings: Fix undocumented compatible strings in examples
kbuild: Add support to build overlays (%.dtbo)
scripts: dtc: Remove the unused fdtdump.c file
scripts: dtc: Build fdtoverlay tool
scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9
scripts: dtc: Fetch fdtoverlay.c from external DTC project
dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings
dt-bindings: iio: dac: Fix AD5686 references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"It's been a relatively calm release cycle and we're actually removing
more code than we're adding.
Summary:
- new driver for the Toshiba Visconti platform
- rework of interrupt handling in gpio-tegra
- updates for GPIO selftests: we're now using the character device to
perform the subsystem checks
- support for a new rcar variant + some code refactoring
- refactoring of gpio-ep93xx
- SPDX License identifier has been updated in the uapi header so that
userspace programs bundling it can become fully REUSE-compliant
- improvements to pwm handling in gpio-mvebu
- support for interrupt handling and power management for gpio-xilinx
as well as some code refactoring
- support for a new chip variant in gpio-pca953x
- removal of drivers: zte xs & intel-mid and removal of leftovers
from intel-msic
- impovements to intel drivers pulled from Andy Shevchenko
- improvements to the gpio-aggregator virtual GPIO driver
- and several minor tweaks and fixes to code and documentation all
over the place"
* tag 'gpio-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (71 commits)
gpio: pcf857x: Fix missing first interrupt
gpio: ep93xx: refactor base IRQ number
gpio: ep93xx: refactor ep93xx_gpio_add_bank
gpio: ep93xx: Fix typo s/hierarchial/hierarchical
gpio: ep93xx: drop to_irq binding
gpio: ep93xx: Fix wrong irq numbers in port F
gpio: uapi: use the preferred SPDX license identifier
gpio: gpio-xilinx: Add check if width exceeds 32
gpio: gpio-xilinx: Add support for suspend and resume
gpio: gpio-xilinx: Add interrupt support
gpio: gpio-xilinx: Reduce spinlock array to array
gpio: gpio-xilinx: Simplify with dev_err_probe()
gpio: msic: Drop driver from Makefile
gpio: wcove: Split out to_ireg() helper and deduplicate the code
gpio: wcove: Switch to use regmap_set_bits(), regmap_clear_bits()
gpio: wcove: Get rid of error prone casting in IRQ handler
gpio: intel-mid: Remove driver for deprecated platform
gpio: msic: Remove driver for deprecated platform
gpio: aggregator: Remove trailing comma in terminator entries
gpio: aggregator: Use compound literal from the header
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Many cleanups and a few drivers removal this cycle.
Subsystem:
- Introduce features bitfield and the first feature: RTC_FEATURE_ALARM
Removed drivers:
- ab3100
- coh901331
- tx4939
- sirfsoc
Drivers:
- use rtc_lock and rtc_unlock instead of opencoding
- constify all struct rtc_class_ops
- quiet maybe-unused variable warning
- replace spin_lock_irqsave with spin_lock in hard IRQ
- pcf2127: disable Power-On Reset Override and run OTP refresh"
* tag 'rtc-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (81 commits)
rtc: abx80x: Add utility function for writing configuration key
rtc: pcf2127: properly set flag WD_CD for rtc chips(pcf2129, pca2129)
rtc: pcf8563: Add NXP PCA8565 compatible
rtc: s3c: quiet maybe-unused variable warning
rtc: s3c: stop setting bogus time
rtc: sd3078: quiet maybe-unused variable warning
rtc: s35390a: quiet maybe-unused variable warning
rtc: rx8581: quiet maybe-unused variable warning
rtc: rx8010: quiet maybe-unused variable warning
rtc: rv8803: quiet maybe-unused variable warning
rtc: rv3032: quiet maybe-unused variable warning
rtc: rv3029: quiet maybe-unused variable warning
rtc: rv3028: quiet maybe-unused variable warning
rtc: rs5c372: quiet maybe-unused variable warning
rtc: pcf85363: quiet maybe-unused variable warning
rtc: pcf85063: quiet maybe-unused variable warnings
rtc: meson: quiet maybe-unused variable warning
rtc: m41t80: quiet maybe-unused variable warning
rtc: isl1208: quiet maybe-unused variable warning
rtc: ds3232: quiet maybe-unused variable warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c update from Alexandre Belloni:
"Subsystem:
- Handle drivers without probe or remove callback
- Remove callback now returns void
- DT documentation is now in yaml
New driver:
- Silvaco I3C master"
* tag 'i3c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw: Drop redundant disec call
MAINTAINERS: Add Silvaco I3C master
i3c: master: svc: Add Silvaco I3C master driver
dt-bindings: i3c: Describe Silvaco master binding
dt-bindings: Add vendor prefix for Silvaco
dt-bindings: i3c: mipi-hci: Include the bus binding
dt-bindings: i3c: Convert the bus description to yaml
i3c: Make remove callback return void
i3c: Handle drivers without probe or remove callback
i3c/master/mipi-i3c-hci: Specify HAS_IOMEM dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI update from Sebastian Reichel:
- runtime PM usage counter fix
* tag 'hsi-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: Fix PM usage counter unbalance in ssi_hw_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Battery/charger driver changes:
- acer_a500: new fuel gauge driver for Acer Iconia Tab A500
- bq256xx: new charger driver
- bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
- bq27xxx: Fix inverted CURRENT_NOW sign
- cpcap: rework fuel gauge and charger drivers
- ltc4162l: new charger driver
- max8997-charger: add extcon based current limit configuration
- max8903, wm97xx, z2: convert to GPIO descriptors (incl. ARM board files)
- misc cleanup and fixes
Reset drivers:
- new poweroff driver for ATC260x
- at91-sama5d2_shdwc: add support for sama7g5
- drop zte zx driver (SoC support is removed from kernel)"
* tag 'for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (55 commits)
power-supply: use kobj_to_dev()
power: supply: charger-manager: fix typo
power/reset: remove zte zx driver
power: supply: bq25980: Fix repetive bq25975 with bq25960
power: supply: smb347-charger: Fix interrupt usage if interrupt is unavailable
power: supply: axp20x_usb_power: Init work before enabling IRQs
power: supply: fix sbs-charger build, needs REGMAP_I2C
power: supply: bq27xxx: fix polarity of current_now
power: supply: charger-manager: fix incorrect health status
power: reset: at91-sama5d2_shdwc: add support for sama7g5
dt-bindings: atmel-sysreg: add microchip,sama7g5-shdwc
power: reset: at91-sama5d2_shdwc: fix wkupdbc mask
dt-bindings: power/supply: Add ltc4162-l-charger
power: supply: bq24190_charger: convert comma to semicolon
power: supply: ab8500_fg: convert comma to semicolon
power: supply: ds2780: Switch to using the new API kobj_to_dev()
power: supply: bq27xxx: Support CHARGE_NOW for bq27z561/bq28z610/bq34z100
power: supply: cpcap-charger: Fix power_supply_put on null battery pointer
power: supply: cpcap-battery: constify psy_desc
power: supply: cpcap-battery: Fix typo
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is all driver updates, the majority of which is a bunch of new
Qualcomm clk drivers that dominate the diffstat because we add support
for six SoCs from that particular vendor.
The other big change is the removal of various clk drivers that are no
longer used now that the kernel is dropping support for those SoCs.
Beyond that there's the usual non-critical fixes for existing drivers
and a good number of patches from Lee Jones that cleanup a bunch of
W=1 enabled builds.
Removed Drivers:
- Remove efm32 clk driver
- Remove tango4 clk driver
- Remove zte zx clk driver
- Remove sirf prima2/atlast clk drivers
- Remove u300 clk driver
New Drivers:
- PLL support on MStar/SigmaStar ARMv7 SoCs
- CPU clks for Qualcomm SDX55
- GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs
- GCC clks for Qualcomm SM8350
- GPU clks for Qualcomm SDM660/SDM630
Updates:
- Video clk fixups on Qualcomm SM8250
- Improvements for multimedia clks on Qualcomm MSM8998
- Fix many warnings with W=1 enabled builds under drivers/clk/
- Support crystal load capacitance for Versaclock VC5
- Add a "skip recall" DT binding for Silicon Labs' si570 to avoid
glitches at boot
- Convert Xilinx VCU clk driver to a proper clk provider driver
- Expose Xilinx ZynqMP clk driver to more platforms
- Amlogic pll driver fixup
- Amlogic meson8b clock controller dt support clean up
- Remove mipi clk from the Amlogic axg clock controller
- New Rockchip rk3368 clock ids related to camera input
- Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk
reparenting
- A series from Liu Ying that adds some SCU clocks support for
i.MX8qxp DC0/MIPI-LVDS subsystems
- A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ,
and clkout1/2 support for i.MX8MM/MN
- Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U
- Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs
- Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial
(HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA
(SYS-DMAC) clocks on Renesas R-Car V3U
- Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs
- Allwinner H616 SoC clk support"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits)
clk: mstar: msc313-mpll: Fix format specifier
clk: mstar: Allow MStar clk drivers to be compile tested
clk: qoriq: use macros to generate pll_mask
clk: qcom: Add Global Clock controller (GCC) driver for SC7280
dt-bindings: clock: Add SC7280 GCC clock binding
clk: qcom: rpmh: Add support for RPMH clocks on SC7280
dt-bindings: clock: Add RPMHCC bindings for SC7280
clk: qcom: gcc-sm8350: add gdsc
dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings
clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver
clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d
clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers
dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc
clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver
clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical
clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical
clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting
clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc
clk: qcom: gdsc: Implement NO_RET_PERIPH flag
clk: mstar: MStar/SigmaStar MPLL driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"Lots of changes to the cros_ec_typec driver for 5.12.
A portion of this this set of cros_ec_typec driver's changes was
merged through GregKH's USB tree in order to satisfy cros_ec_typec
driver and typec connector class subsystem dependencies of subsequent
changes.
Summary:
cros_ec_typec:
- Registration of cable plug information
- Support for SOP' plug registration and altmodes
- Support for reporting number of altmodes supported by partners and
plugs
- Send mux configuration ack to EC via a new host command
- Support mux control with no port partner present
- Decouple cable removal from partner removal
cros_ec misc:
- Fix some event masking in cros_ec_proto.
- Gwendal reworked cros_ec's top and bottom half for consistency in
ishtp and rpmsg
- Constify static attribute_group structs"
* tag 'tag-chrome-platform-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Flush pending work
platform/chrome: cros_ec_types: Support disconnect events without partners
platform/chrome: cros_ec_typec: Skip port partner check in configure_mux()
platform/chrome: cros_ec_typec: Decouple partner removal
platform/chrome: cros_ec: Call interrupt bottom half at probe time
platform/chrome: cros_ec: Call interrupt bottom half in ISH or RPMSG mode
platform/chrome: cros_ec_sysfs: Add cold-ap-off to sysfs reboot.
platform/chrome: cros_ec_commands: Add host command to keep AP off after EC reset.
platform/chrome: Constify static attribute_group structs
platform/chrome: cros_ec_proto: Add LID and BATTERY to default mask
platform/chrome: cros_ec_proto: Use EC_HOST_EVENT_MASK not BIT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Standardise MFD_CELL_* helpers
New Drivers:
- Add support for Acer Iconia Tab A500 Embedded Controller
New Device Support:
- Add support for ROHM BD9574MWF to BD9571MWV
- Add support for Intel Alder Lake PCH-P PCI to LPSS
- Add support for Intel Alder Lake PCH-S PCI to LPSS
New Functionality:
- Support ACPI enumeration; arizona
Fix-ups:
- Managed resources; bd9571mwv
- DT additions/fix-ups; bd9571mwv, iqs62x, max8997, gateworks-gsc, ene-kb930
- Convert to SPDX; bd9571mw
- Fix return values/error handling; sunxi
- Provide SOFTDEP; arizona
- Make use of DIV_ROUND_UP; mcp-sa11x0
- Use generic APIs; arizona
- Add MAC address sysfs entries; intel-m10-bmc
- Trivial: Coding-style fix-ups; iqs62x
- Trivial: Remove superflouous code; iqs62x
- Clear-up naming conventions; iqs62x
Bug Fixes:
- Fix 'pointer from integer' error; altera-sysmgr
- Convert SGI_MFD_IOC3 from tristate to bool; Kconfig
- Fix interrupt handling; gateworks-gsc
- Extend required delay; iqs62x
- Do not use I2C polling during calibration; iqs62x
- Do no adjust clock frequency during calibration; iqs62x
- Fix use-after-free; wm831x-auxad"
* tag 'mfd-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: wm831x-auxadc: Prevent use after free in wm831x_auxadc_read_irq()
mfd: iqs62x: Do not change clock frequency during ATI
mfd: iqs62x: Do not poll during ATI
mfd: iqs62x: Increase interrupt handler return delay
mfd: iqs62x: Rename regmap_config struct
mfd: iqs62x: Remove unused bit mask
mfd: iqs62x: Remove superfluous whitespace above fallthroughs
mfd: intel-lpss: Add Intel Alder Lake PCH-S PCI IDs
mfd: intel-m10-bmc: Expose MAC address and count
mfd: Add driver for Embedded Controller found on Acer Iconia Tab A500
dt-bindings: mfd: Add ENE KB930 Embedded Controller binding
dt-bindings: mfd: gateworks-gsc: Add fan-tach mode
mfd: intel-lpss: Add Intel Alder Lake PCH-P PCI IDs
mfd: gateworks-gsc: Fix interrupt type
mfd: Standardise MFD_CELL_* helper names
mfd: mcp-sa11x0: Use DIV_ROUND_UP to calculate rw_timeout
mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell
dt-bindings: mfd: Correct the node name of the panel LED
mfd: sgi-ioc3: Turn Kconfig option into a bool
mfd: altera-sysmgr: Fix physical address storing more
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Convert to GPIO descriptors
Fix-ups:
- Trivial: fix coding style in sky81452-backlight
- Ensure backlight state is known on bring-up in ktd253
- Use common platform API in qcom-wled and fbdev"
* tag 'backlight-next-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight/video: Use Platform getter/setter functions
backlight: ktd253: Bring up in a known state
backlight: sky81452-backlight: Convert comma to semicolon
backlight: lms283gf05: Convert to GPIO descriptors
|
|
Pull auxdisplay updates from Miguel Ojeda:
"A set of auxdisplay fixes and improvements from Geert Uytterhoeven,
and one from Robin van der Gracht that got lost a long time ago"
* tag 'auxdisplay-for-linus-v5.12' of git://github.com/ojeda/linux:
auxdisplay: Fix duplicate CHARLCD config symbol
auxdisplay: ht16k33: Fix refresh rate handling
dt-bindings: auxdisplay: ht16k33: Convert to json-schema
dt-bindings: auxdisplay: ht16k33: Fix default-brightness-level range
dt-bindings: auxdisplay: ht16k33: Keyscan function should be optional
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The main focus of this release from a framework point of view has been
spi-mem where we've acquired support for a few new hardware features
which enable better performance on suitable hardware.
Otherwise mostly thanks to Arnd's cleanup efforts on old platforms
we've removed several obsolete drivers which just about balance out
the newer drivers we've added this cycle.
Summary:
- Allow drivers to flag if they are unidirectional.
- Support for DTR mode and hardware acceleration of dummy cycles in
spi-mem.
- Support for Allwinder H616, Intel Lightning Mountain, nVidia Tegra
QuadSPI, Realtek RTL838x and RTL839x.
- Removal of obsolete EFM32, Txx9 and SIRF Prima and Atlas drivers"
* tag 'spi-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (76 commits)
spi: Skip zero-length transfers in spi_transfer_one_message()
spi: dw: Avoid stack content exposure
spi: cadence-quadspi: Use spi_mem_dtr_supports_op()
spi: spi-mem: add spi_mem_dtr_supports_op()
spi: atmel-quadspi: Disable the QSPI IP at suspend()
spi: pxa2xx: Add IDs for the controllers found on Intel Lynxpoint
spi: pxa2xx: Fix the controller numbering for Wildcat Point
spi: Change provied to provided in the file spi.h
spi: mediatek: add set_cs_timing support
spi: support CS timing for HW & SW mode
spi: add power control when set_cs_timing
spi: stm32: make spurious and overrun interrupts visible
spi: stm32h7: replace private SPI_1HZ_NS with NSEC_PER_SEC
spi: stm32: defer probe for reset
spi: stm32: driver uses reset controller only at init
spi: stm32h7: ensure message are smaller than max size
spi: stm32: use bitfield macros
spi: stm32: do not mandate cs_gpio
spi: stm32: properly handle 0 byte transfer
spi: clps711xx: remove redundant white-space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite an active release for driver specific updates but very little
going on at the subsystem level this time for the regulator API.
Summary:
- Overhaul of the Qualcomm LABIBB driver.
- Allow use of regulator_sync_voltage() on coupled regulators.
- Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm
PCM8180/c and PM8009-1 and Richtek RT4831
- Removal of the AB3100 driver"
* tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
regulator: bd718x7, bd71828, Fix dvs voltage levels
regulator: pca9450: Add sd-vsel GPIO
regulator: pca9450: Enable system reset on WDOG_B assertion
regulator: pca9450: Add SD_VSEL GPIO for LDO5
regulator: qcom-rpmh: fix pm8009 ldo7
regulator: mt6315: Add support for MT6315 regulator
regulator: document binding for MT6315 regulator
regulator: dt-bindings: Document charger-supply for max8997
regulator: qcom-labibb: Use disable_irq_nosync from isr
regulator: pf8x00: Fix typo for PF8200 chip name
regulator: pf8x00: set ramp_delay for bucks
regulator: core: Avoid debugfs: Directory ... already present! error
regulator: pf8x00: Add suspend support
regulator: Make regulator_sync_voltage() usable by coupled regulators
regulator: s5m8767: Drop regulators OF node reference
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: qcom-rpmh: Add pmc8180 and pmc8180c
regulator: s5m8767: Fix reference count leak
regulator: remove ab3100 driver
regulator: axp20x: Fix reference cout leak
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap update from Mark Brown:
"Just one simple code style improvement this time, no features.
There is an addition to add a new SoundWire regmap type but that
should be coming via the SoundWire tree as the support for the
underlying bus features was only added this cycle"
* tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Assign boolean values to a bool variable
|
