| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
V4L2 async sub-device matching originally used the device nodes only.
Endpoint nodes were taken into use instead as using the device nodes was
problematic for it was in some cases ambiguous which link might have been
in question.
There is however no need to use endpoint nodes on both sides, as the async
sub-device's fwnode can always be trivially obtained using
fwnode_graph_get_remote_endpoint() when needed while what counts is
whether or not the link is between two device nodes, i.e. the device nodes
match.
This will briefly break the adv748x driver but it will be fixed later in
the set, by patch "media: adv748x: Return to endpoint matching".
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The naming of list heads and list entries is confusing as they're named
similarly. Use _list for list head and _entry for list entries.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Pass only information required for sub-device matching to functions
checking whether the async sub-device already exists. Do the same for
debug message printing. This makes further changes to other aspects of
async sub-devices easier.
Accordingly, also perform further renames:
asd_equal as v4l2_async_match_equal,
v4l2_async_nf_has_async_subdev as v4l2_async_nf_has_async_match,
__v4l2_async_nf_has_async_subdev as
v4l2_async_nf_has_async_subdev_entry and
v4l2_async_nf_asd_valid as v4l2_async_nf_match_valid.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The async match type is a struct field now, rename V4L2_ASYNC_MATCH_*
macros as V4L2_ASYNC_MATCH_TYPE_* instead.
This patch has been produced by:
git grep -l V4L2_ASYNC_MATCH_ -- drivers/media/ drivers/staging/media/ \
include/ Documentation/|xargs perl -i -pe \
's/V4L2_ASYNC_MATCH_\K/TYPE_/g'
so it must be correct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Make V4L2 async match information a struct, making it easier to use it
elsewhere outside the scope of struct v4l2_async_subdev.
Also remove an obsolete comment --- none of these fields are supposed to
be touched by drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The callers do pass a non-NULL asd to v4l2_async_nf_asd_valid() already.
There's no need for the NULL check here.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There's a need to verify that a single async sub-device isn't being added
multiple times, this would be an error. This takes place at the time of
adding the async sub-device to the notifier's list as well as when the
notifier is added to the global notifier's list.
Use the pointer to the sub-device for testing this instead of an index to
an array that is long gone. (There was an array of async sub-devices in
the notifier before it was converted to a linked list by commit
66beb323e4a0 ("media: v4l2: async: Remove notifier subdevs array").)
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Just add some debug prints for V4L2 async sub-device matching process.
These might come useful in figuring out why things don't work as expected.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document v4l2_async_nf_cleanup() which must be called before releasing an
unregistered notifier's memory. Also remove the sentence regarding
v4l2_async_nf_init() arguments --- those are documented in kerneldoc which
is referred here.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Also v4l2_async_nf_add_fwnode() may be used to add an async sub-device
descriptor to a notifier. Document this. Also remove a redundant sentence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document that the notifier of an async sub-device is, besider
unregistered, also cleaned up using v4l2_async_unregister_subdev().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add section titles for async documentation. While the documentation is
mostly fine as-is, it has grown from its original state but remains
without internal structure. Add it now.
Also remove an extra newline.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
An example adding an async sub-device to a V4L2 async notifier. The name
of the variable in error handling was wrong (asd vs. my_asd).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Move the creation of the links between external sub-devices and ISP
sub-devices to the bound callback. This way we can also remove the need to
access the sub-device's notifier field that will soon be removed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The async notifier bound callback does a lot of checks that have probably
been always unnecessary. Remove the lookup of the async subev that we
already have, as well as the debug print that is already printed by the
framework.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove an unneeded forward declaration for struct v4l2_async_subdev.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Remove an unneeded declaration for struct fwnode_handle.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The v4l2_async_nf_parse_fwnode_endpoints() function, part of
v4l2-fwnode.c, was a helper meant to register one async sub-dev for each
fwnode endpoint of a device.
The function is marked as deprecated in the documentation and is actually
not used anywhere anymore. Drop it and remove the helper function
v4l2_async_nf_fwnode_parse_endpoint() from v4l2-fwnode.c.
This change allows to make the helper function
__v4l2_async_nf_add_connection() visibility private to v4l2-async.c so
that there is no risk drivers can mistakenly use it.
[Sakari Ailus: Small fixups on top.]
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit fe8a33978383 ("media: mediatek: vcodec: Read HW active status
from syscon") allowed the driver to read the VDEC_SYS io space from a
syscon instead of from the reg property when reg-names are supplied.
However as part of that change, a smatch warning was introduced:
drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_drv.c:142 mtk_vcodec_get_reg_bases() error: buffer overflow 'mtk_dec_reg_names' 11 <= 11
With a correct Devicetree, that is, one that follows the dt-binding, it
wouldn't be possible to trigger such a buffer overflow. Even so, update
the range validation of the reg property, so that the smatch warning is
fixed and if an incorrect Devicetree is ever supplied the code errors
out instead of causing memory corruption.
Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Closes: https://lore.kernel.org/all/b5fd2dff-14a5-3ad8-9698-d1a50f4516fa@xs4all.nl
Fixes: fe8a33978383 ("media: mediatek: vcodec: Read HW active status from syscon")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document missing fields. This resolves two warnings:
drivers/media/platform/qcom/venus/core.h:226: warning: Function parameter or member 'venus_ver' not described in 'venus_core'
drivers/media/platform/qcom/venus/core.h:501: warning: Function parameter or member 'enc_state' not described in 'venus_inst'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
|
|
If we encounter any error in the vdec_msg_queue_init() then we need
to set "msg_queue->wdma_addr.size = 0;". Normally, this is done
inside the vdec_msg_queue_deinit() function. However, if the
first call to allocate &msg_queue->wdma_addr fails, then the
vdec_msg_queue_deinit() function is a no-op. For that situation, just
set the size to zero explicitly and return.
There were two other error paths which did not clean up before returning.
Change those error paths to goto mem_alloc_err.
Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The "lat_buf->private_data" needs to be set to NULL to prevent a
double free. How this would happen is if vdec_msg_queue_init() failed
twice in a row and on the second time it failed earlier than on the
first time.
The vdec_msg_queue_init() function has a loop which does:
for (i = 0; i < NUM_BUFFER_COUNT; i++) {
Each iteration initializes one element in the msg_queue->lat_buf[] array
and then the clean up function vdec_msg_queue_deinit() frees each
element of the msg_queue->lat_buf[] array. This clean up code relies
on the assumption that every element is either initialized or zeroed.
Leaving a freed pointer which is non-zero breaks the assumption.
Fixes: b199fe46f35c ("media: mtk-vcodec: Add msg queue feature for lat and core architecture")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
"fb_use_list" is used to store used or referenced frame buffers for
vp9 stateful decoder. "NULL" should be returned when getting target
frame buffer failed from "fb_use_list", not a random unexpected one.
Fixes: f77e89854b3e ("[media] vcodec: mediatek: Add Mediatek VP9 Video Decoder Driver")
Signed-off-by: Irui Wang <irui.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix av1 decode fail when iova is 36bit.
Decoder hardware will access incorrect iova address when tile buffer is
36bit, it will lead to iommu fault when hardware access dram data.
Fixes: 2f5d0aef37c6 ("media: mediatek: vcodec: support stateless AV1 decoder")
Signed-off-by: Xiaoyong Lu<xiaoyong.lu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Remove the requirement of a VDEC_SYS reg iospace for both MT8173 and
MT8183. To achieve that, rely on a vdecsys syscon to be passed through
the DT, and use it to directly read the VDEC_HW_ACTIVE bit during IRQ
handling to check whether the HW is active. Also update the VP8 stateful
decoder to use the syscon, if present, for writes to VDEC_SYS.
The old behavior is still present when reg-names aren't supplied, as
to keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added vdecsys_regmap kerneldoc line provided by Nicolas]
|
|
The VDEC_HW_ACTIVE bit is located at offset 0, bit 4 of the VDECSYS
iospace. Only the mask was previously defined, with the address being
implicit. Explicitly define the address, and append a '_MASK' suffix to
the mask, to make accesses to this bit clearer.
This commit brings no functional change.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The binding expects the first register space to be VDEC_SYS. However
this register space is already assigned to a different node on both
MT8173 and MT8183: a clock-controller node called 'vdecsys' which is
also a syscon.
In order to resolve the overlapping address ranges, remove the VDEC_SYS
register space from the video decoder, and add a new property to hold
the phandle to the syscon, so that iospace can still be handled.
Also add reg-names to be able to tell that this new register schema is
used, so the driver can keep backward compatibility.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
On MT8183 it's not necessary to configure the parent for the clocks.
Remove the assigned-clocks and assigned-clock-parents from the required
list.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
MT8173 and MT8183 have different clocks, and consequently clock-names.
Relax the number of clocks and set clock-names based on compatible.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This is intended to print the error code but there is a typo so it
prints IS_ERR() instead of PTR_ERR().
Fixes: 77f3b023f452 ("media: mediatek: vcodec: Add debugfs interface to get debug information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The list iterator "dbgfs_inst" is always non-NULL. This means that the
test for NULL inside the loop is unnecessary and it also means that the
test for NULL outside the loop will not work. If we do not find the item
on the list with the correct the ctx_id then it will free invalid memory
leading to a crash.
Fixes: cd403a6a0419 ("media: mediatek: vcodec: Add a debugfs file to get different useful information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
the supported_instance_count determine the instance index range,
it shouldn't exceed the bits number of instance_mask,
otherwise the bitops of instance_mask may cross boundaries
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
assign value '-EINVAL' to ret, but the stored value is overwritten
before it can be used
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
using uninitialized value may introduce risk
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
null-checking of a pointor is suggested before dereferencing it
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
calling "vpu_cmd_send/vpu_get_buffer_state/vpu_session_alloc_fs"
without checking return value
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
After testing it is possible for the hardware to decode H264
bistream with a height up to 2560.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: cd33c830448ba ("media: rkvdec: Add the rkvdec driver")
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
the firmware only support low latency mode for h264,
but firmware will notify an event to driver
when one frame is decoded,
if V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY_ENABLE is enabled,
and V4L2_CID_MPEG_VIDEO_DEC_DISPLAY_DELAY is set to 0,
driver can display the decoded frame immediately.
Fixes: ffa331d9bf94 ("media: amphion: decoder implement display delay enable")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
In mtk_jpeg_probe, &jpeg->job_timeout_work is bound with
mtk_jpeg_job_timeout_work. Then mtk_jpeg_dec_device_run
and mtk_jpeg_enc_device_run may be called to start the
work.
If we remove the module which will call mtk_jpeg_remove
to make cleanup, there may be a unfinished work. The
possible sequence is as follows, which will cause a
typical UAF bug.
Fix it by canceling the work before cleanup in the mtk_jpeg_remove
CPU0 CPU1
|mtk_jpeg_job_timeout_work
mtk_jpeg_remove |
v4l2_m2m_release |
kfree(m2m_dev); |
|
| v4l2_m2m_get_curr_priv
| m2m_dev->curr_ctx //use
Fixes: b2f0d2724ba4 ("[media] vcodec: mediatek: Add Mediatek JPEG Decoder Driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Commit f100ce3bbd6a ("media: verisilicon: Fix crash when probing
encoder") removed vpu_fmt from hantro_try_fmt(), since it was
initialized from vpu_dst_fmt, which may not be initialized, when TRY_FMT
is called. It was replaced by fmt, which is found using the pixelformat.
For the encoder, this changed the fmt to contain the raw format instead
of the coded format. The format constraints as of fmt->frmsize are only
valid for the coded format and are 0 for the raw formats. Therefore, the
size of a encoder OUTPUT device is constrained to 0 and the
v4l2-compliance tests for G_FMT, TRY_FMT, and SET_FMT fail.
Bring back vpu_fmt to use the coded format on an encoder OUTPUT device,
but initialize it using the currently set pixelformat on dst_fmt, which
is the coded format on an encoder.
Fixes: f100ce3bbd6a ("media: verisilicon: Fix crash when probing encoder")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Adhere to Linux kernel coding style. Removed redundant blank line.
Issue found by checkpatch.
Signed-off-by: Emma Christy <emma.t.christy@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The meson-vdec module loads firmware so add MODULE_FIRMWARE macros to
provide that information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
convert numbers into meaningful names,
then it can improve the log readability
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
according to v4l2 stateful decoder document 4.5.1.3. State Machine,
the state should change from seek to initialization
if call VIDIOC_REQBUFS(OUTPUT, 0).
so reinit the vpu decoder if reqbufs output 0
Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It was completely unnecessary to use BUG in saa7164_s_frequency,
just return an error instead. This also solves a smatch error:
drivers/media/pci/saa7164/saa7164-encoder.c:388 saa7164_s_frequency() error: potentially dereferencing uninitialized 'tsport'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This tells sparse that tegra_vip_driver is actually used,
and so avoids this warning:
drivers/staging/media/tegra-video/vip.c:280:31: warning: 'tegra_vip_driver' defined but not used [-Wunused-variable]
280 | static struct platform_driver tegra_vip_driver = {
| ^~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not make any sense.
This also fixes this !CONFIG_OF error:
drivers/staging/media/sunxi/sun6i-isp/sun6i_isp.c:529:34: warning: 'sun6i_isp_of_match' defined but not used [-Wunused-const-variable=]
529 | static const struct of_device_id sun6i_isp_of_match[] = {
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
|
|
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Shijie has not been actively working on the driver,
his e-mail address is bouncing for quite awhile now.
remove him from the maintainer list here.
I do want to thank him for his work on the driver.
Signed-off-by: Zhou Peng <eagle.zhou@nxp.com>
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
