| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260209142304.770150175@linuxfoundation.org
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1aaedafb21f38cb872d44f7608b4828a1e14e795 upstream.
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
The former quirk entry did not acomplish this and is removed.
Fixes: b48fe9af1e60 ("ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU")
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260123221233.28273-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a0a75b40c919b9f6d3a0b6c978e6ccf344c1be5a ]
The COMMAND1 register bits [29:28] set the SPI mode, which controls
the clock idle level. When a transfer ends, tegra_spi_transfer_end()
writes def_command1_reg back to restore the default state, but this
register value currently lacks the mode bits. This results in the
clock always being configured as idle low, breaking devices that
need it high.
Fix this by storing the mode bits in def_command1_reg during setup,
to prevent this field from always being cleared.
Fixes: f333a331adfa ("spi/tegra114: add spi driver")
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260204141212.1540382-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41d9a6795b95d6ea28439ac1e9ce8c95bbca20fc ]
In tegra_slink_probe(), when platform_get_irq() fails, it directly
returns from the function with an error code, which causes a memory leak.
Replace it with a goto label to ensure proper cleanup.
Fixes: eb9913b511f1 ("spi: tegra: Fix missing IRQ check in tegra_slink_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260202-slink-v1-1-eac50433a6f9@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
tegra_qspi_non_combined_seq_xfer
[ Upstream commit 6d7723e8161f3c3f14125557e19dd080e9d882be ]
Protect the curr_xfer clearing in tegra_qspi_non_combined_seq_xfer()
with the spinlock to prevent a race with the interrupt handler that
reads this field to check if a transfer is in progress.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-5-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf4528ab28e2bf112c3a2cdef44fd13f007781cd ]
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-4-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
tegra_qspi_setup_transfer_one
[ Upstream commit f5a4d7f5e32ba163cff893493ec1cbb0fd2fb0d5 ]
When the timeout handler processes a completed transfer and signals
completion, the transfer thread can immediately set up the next transfer
and assign curr_xfer to point to it.
If a delayed ISR from the previous transfer then runs, it checks if
(!tqspi->curr_xfer) (currently without the lock also -- to be fixed
soon) to detect stale interrupts, but this check passes because
curr_xfer now points to the new transfer. The ISR then incorrectly
processes the new transfer's context.
Protect the curr_xfer assignment with the spinlock to ensure the ISR
either sees NULL (and bails out) or sees the new value only after the
assignment is complete.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-3-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ef13ba357656451d6371940d8414e3e271df97e3 ]
Move the assignment of the transfer pointer from curr_xfer inside the
spinlock critical section in both handle_cpu_based_xfer() and
handle_dma_based_xfer().
Previously, curr_xfer was read before acquiring the lock, creating a
window where the timeout path could clear curr_xfer between reading it
and using it. By moving the read inside the lock, the handlers are
guaranteed to see a consistent value that cannot be modified by the
timeout path.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-2-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aabd8ea0aa253d40cf5f20a609fc3d6f61e38299 ]
When the ISR thread wakes up late and finds that the timeout handler
has already processed the transfer (curr_xfer is NULL), return
IRQ_HANDLED instead of IRQ_NONE.
Use a similar approach to tegra_qspi_handle_timeout() by reading
QSPI_TRANS_STATUS and checking the QSPI_RDY bit to determine if the
hardware actually completed the transfer. If QSPI_RDY is set, the
interrupt was legitimate and triggered by real hardware activity.
The fact that the timeout path handled it first doesn't make it
spurious. Returning IRQ_NONE incorrectly suggests the interrupt
wasn't for this device, which can cause issues with shared interrupt
lines and interrupt accounting.
Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-1-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7db85d579a1dccb624235534508c75fbf2dfe46 ]
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f7b ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 38e818718c5e04961eea0fa8feff3f100ce40408 upstream.
From the memory-barriers.txt document regarding memory barrier ordering
guarantees:
(*) These guarantees do not apply to bitfields, because compilers often
generate code to modify these using non-atomic read-modify-write
sequences. Do not attempt to use bitfields to synchronize parallel
algorithms.
(*) Even in cases where bitfields are protected by locks, all fields
in a given bitfield must be protected by one lock. If two fields
in a given bitfield are protected by different locks, the compiler's
non-atomic read-modify-write sequences can cause an update to one
field to corrupt the value of an adjacent field.
btrfs_space_info has a bitfield sharing an underlying word consisting of
the fields full, chunk_alloc, and flush:
struct btrfs_space_info {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_space_info * parent; /* 8 8 */
...
int clamp; /* 172 4 */
unsigned int full:1; /* 176: 0 4 */
unsigned int chunk_alloc:1; /* 176: 1 4 */
unsigned int flush:1; /* 176: 2 4 */
...
Therefore, to be safe from parallel read-modify-writes losing a write to
one of the bitfield members protected by a lock, all writes to all the
bitfields must use the lock. They almost universally do, except for
btrfs_clear_space_info_full() which iterates over the space_infos and
writes out found->full = 0 without a lock.
Imagine that we have one thread completing a transaction in which we
finished deleting a block_group and are thus calling
btrfs_clear_space_info_full() while simultaneously the data reclaim
ticket infrastructure is running do_async_reclaim_data_space():
T1 T2
btrfs_commit_transaction
btrfs_clear_space_info_full
data_sinfo->full = 0
READ: full:0, chunk_alloc:0, flush:1
do_async_reclaim_data_space(data_sinfo)
spin_lock(&space_info->lock);
if(list_empty(tickets))
space_info->flush = 0;
READ: full: 0, chunk_alloc:0, flush:1
MOD/WRITE: full: 0, chunk_alloc:0, flush:0
spin_unlock(&space_info->lock);
return;
MOD/WRITE: full:0, chunk_alloc:0, flush:1
and now data_sinfo->flush is 1 but the reclaim worker has exited. This
breaks the invariant that flush is 0 iff there is no work queued or
running. Once this invariant is violated, future allocations that go
into __reserve_bytes() will add tickets to space_info->tickets but will
see space_info->flush is set to 1 and not queue the work. After this,
they will block forever on the resulting ticket, as it is now impossible
to kick the worker again.
I also confirmed by looking at the assembly of the affected kernel that
it is doing RMW operations. For example, to set the flush (3rd) bit to 0,
the assembly is:
andb $0xfb,0x60(%rbx)
and similarly for setting the full (1st) bit to 0:
andb $0xfe,-0x20(%rax)
So I think this is really a bug on practical systems. I have observed
a number of systems in this exact state, but am currently unable to
reproduce it.
Rather than leaving this footgun lying around for the future, take
advantage of the fact that there is room in the struct anyway, and that
it is already quite large and simply change the three bitfield members to
bools. This avoids writes to space_info->full having any effect on
writes to space_info->flush, regardless of locking.
Fixes: 957780eb2788 ("Btrfs: introduce ticketed enospc infrastructure")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ The context change is due to the commit cc0517fe779f
("btrfs: tweak extent/chunk allocation for space_info sub-space")
in v6.16 which is irrelevant to the logic of this patch. ]
Signed-off-by: Rahul Sharma <black.hawk@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7f67ba5413f98d93116a756e7f17cd2c1d6c2bd6 ]
Fixes: 4a767b1d039a8 ("ASoC: amd: add acp3x pdm driver dma ops")
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Link: https://patch.msgid.link/20260202205034.7697-1-chris.bainbridge@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbf4a17ad9ffc4e3d7ec13d73ecd59dea149ed25 ]
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: f72514b3c569 ("ipv6: clear RA flags when adding a static route")
Reported-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cb809def1baaac68ab92
Tested-by: syzbot+cb809def1baaac68ab92@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260204095837.1285552-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f41c5d151078c5348271ffaf8e7410d96f2d82f8 ]
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones.
Fixes: 628bd3e49cba ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Andrew Fasano <andrew.fasano@nist.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 831a2b27914cc880130ffe8fb8d1e65a5324d07f ]
This is a printf-style function, which gcc -Werror=suggest-attribute=format
correctly points out:
drivers/hwmon/occ/common.c: In function 'occ_init_attribute':
drivers/hwmon/occ/common.c:761:9: error: function 'occ_init_attribute' might be a candidate for 'gnu_printf' format attribute [-Werror=suggest-attribute=format]
Add the attribute to avoid this warning and ensure any incorrect
format strings are detected here.
Fixes: 744c2fe950e9 ("hwmon: (occ) Rework attribute registration for stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20260203163440.2674340-1-arnd@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e0c8f4d16de92520623aa1ea485cadbf64e6929 ]
The mgag200_bmc_stop_scanout() function is called by the .atomic_disable()
handler for the MGA G200 VGA BMC encoder. This function performs a few
register writes to inform the BMC of an upcoming mode change, and then
polls to wait until the BMC actually stops.
The polling is implemented using a busy loop with udelay() and an iteration
timeout of 300, resulting in the function blocking for 300 milliseconds.
The function gets called ultimately by the output_poll_execute work thread
for the DRM output change polling thread of the mgag200 driver:
kworker/0:0-mm_ 3528 [000] 4555.315364:
ffffffffaa0e25b3 delay_halt.part.0+0x33
ffffffffc03f6188 mgag200_bmc_stop_scanout+0x178
ffffffffc087ae7a disable_outputs+0x12a
ffffffffc087c12a drm_atomic_helper_commit_tail+0x1a
ffffffffc03fa7b6 mgag200_mode_config_helper_atomic_commit_tail+0x26
ffffffffc087c9c1 commit_tail+0x91
ffffffffc087d51b drm_atomic_helper_commit+0x11b
ffffffffc0509694 drm_atomic_commit+0xa4
ffffffffc05105e8 drm_client_modeset_commit_atomic+0x1e8
ffffffffc0510ce6 drm_client_modeset_commit_locked+0x56
ffffffffc0510e24 drm_client_modeset_commit+0x24
ffffffffc088a743 __drm_fb_helper_restore_fbdev_mode_unlocked+0x93
ffffffffc088a683 drm_fb_helper_hotplug_event+0xe3
ffffffffc050f8aa drm_client_dev_hotplug+0x9a
ffffffffc088555a output_poll_execute+0x29a
ffffffffa9b35924 process_one_work+0x194
ffffffffa9b364ee worker_thread+0x2fe
ffffffffa9b3ecad kthread+0xdd
ffffffffa9a08549 ret_from_fork+0x29
On a server running ptp4l with the mgag200 driver loaded, we found that
ptp4l would sometimes get blocked from execution because of this busy
waiting loop.
Every so often, approximately once every 20 minutes -- though with large
variance -- the output_poll_execute() thread would detect some sort of
change that required performing a hotplug event which results in attempting
to stop the BMC scanout, resulting in a 300msec delay on one CPU.
On this system, ptp4l was pinned to a single CPU. When the
output_poll_execute() thread ran on that CPU, it blocked ptp4l from
executing for its 300 millisecond duration.
This resulted in PTP service disruptions such as failure to send a SYNC
message on time, failure to handle ANNOUNCE messages on time, and clock
check warnings from the application. All of this despite the application
being configured with FIFO_RT and a higher priority than the background
workqueue tasks. (However, note that the kernel did not use
CONFIG_PREEMPT...)
It is unclear if the event is due to a faulty VGA connection, another bug,
or actual events causing a change in the connection. At least on the system
under test it is not a one-time event and consistently causes disruption to
the time sensitive applications.
The function has some helpful comments explaining what steps it is
attempting to take. In particular, step 3a and 3b are explained as such:
3a - The third step is to verify if there is an active scan. We are
waiting on a 0 on remhsyncsts (<XSPAREREG<0>.
3b - This step occurs only if the remove is actually scanning. We are
waiting for the end of the frame which is a 1 on remvsyncsts
(<XSPAREREG<1>).
The actual steps 3a and 3b are implemented as while loops with a
non-sleeping udelay(). The first step iterates while the tmp value at
position 0 is *not* set. That is, it keeps iterating as long as the bit is
zero. If the bit is already 0 (because there is no active scan), it will
iterate the entire 300 attempts which wastes 300 milliseconds in total.
This is opposite of what the description claims.
The step 3b logic only executes if we do not iterate over the entire 300
attempts in the first loop. If it does trigger, it is trying to check and
wait for a 1 on the remvsyncsts. However, again the condition is actually
inverted and it will loop as long as the bit is 1, stopping once it hits
zero (rather than the explained attempt to wait until we see a 1).
Worse, both loops are implemented using non-sleeping waits which spin
instead of allowing the scheduler to run other processes. If the kernel is
not configured to allow arbitrary preemption, it will waste valuable CPU
time doing nothing.
There does not appear to be any documentation for the BMC register
interface, beyond what is in the comments here. It seems more probable that
the comment here is correct and the implementation accidentally got
inverted from the intended logic.
Reading through other DRM driver implementations, it does not appear that
the .atomic_enable or .atomic_disable handlers need to delay instead of
sleep. For example, the ast_astdp_encoder_helper_atomic_disable() function
calls ast_dp_set_phy_sleep() which uses msleep(). The "atomic" in the name
is referring to the atomic modesetting support, which is the support to
enable atomic configuration from userspace, and not to the "atomic context"
of the kernel. There is no reason to use udelay() here if a sleep would be
sufficient.
Replace the while loops with a read_poll_timeout() based implementation
that will sleep between iterations, and which stops polling once the
condition is met (instead of looping as long as the condition is met). This
aligns with the commented behavior and avoids blocking on the CPU while
doing nothing.
Note the RREG_DAC is implemented using a statement expression to allow
working properly with the read_poll_timeout family of functions. The other
RREG_<TYPE> macros ought to be cleaned up to have better semantics, and
several places in the mgag200 driver could make use of RREG_DAC or similar
RREG_* macros should likely be cleaned up for better semantics as well, but
that task has been left as a future cleanup for a non-bugfix.
Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260202-jk-mgag200-fix-bad-udelay-v2-1-ce1e9665987d@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5c2c3c38be396257a6a2e55bd601a12bb9781507 ]
The udp GRO complete stage assumes that all the packets inserted the RX
have the `encapsulation` flag zeroed. Such assumption is not true, as a
few H/W NICs can set such flag when H/W offloading the checksum for
an UDP encapsulated traffic, the tun driver can inject GSO packets with
UDP encapsulation and the problematic layout can also be created via
a veth based setup.
Due to the above, in the problematic scenarios, udp4_gro_complete() uses
the wrong network offset (inner instead of outer) to compute the outer
UDP header pseudo checksum, leading to csum validation errors later on
in packet processing.
Address the issue always clearing the encapsulation flag at GRO completion
time. Such flag will be set again as needed for encapsulated packets by
udp_gro_complete().
Fixes: 5ef31ea5d053 ("net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/562638dbebb3b15424220e26a180274b387e2a88.1770032084.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
devm_gpiod_get_optional() in adin1110_check_spi()
[ Upstream commit 78211543d2e44f84093049b4ef5f5bfa535f4645 ]
The devm_gpiod_get_optional() function may return an ERR_PTR in case of
genuine GPIO acquisition errors, not just NULL which indicates the
legitimate absence of an optional GPIO.
Add an IS_ERR() check after the call in adin1110_check_spi(). On error,
return the error code to ensure proper failure handling rather than
proceeding with invalid pointers.
Fixes: 36934cac7aaf ("net: ethernet: adi: adin1110: add reset GPIO")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260202040228.4129097-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 74d9391e8849e70ded5309222d09b0ed0edbd039 ]
The rx->skey field contains a struct tipc_aead_key with GCM-AES
encryption keys used for TIPC cluster communication. Using plain
kfree() leaves this sensitive key material in freed memory pages
where it could potentially be recovered.
Switch to kfree_sensitive() to ensure the key material is zeroed
before the memory is freed.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260131180114.2121438-1-hodgesd@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fdf3f6800be36377e045e2448087f12132b88d2f ]
Gal reports that BPF redirect increments dev->stats.tx_errors
on failure. This is not correct, most modern drivers completely
ignore dev->stats so these drops will be invisible to the user.
Core code should use the dedicated core stats which are folded
into device stats in dev_get_stats().
Note that we're switching from tx_errors to tx_dropped.
Core only has tx_dropped, hence presumably users already expect
that counter to increment for "stack" Tx issues.
Reported-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/c5df3b60-246a-4030-9c9a-0a35cd1ca924@nvidia.com
Fixes: b4ab31414970 ("bpf: Add redirect_neigh helper as redirect drop-in")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130033827.698841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8db6475a83649689c087a8f52486fcc53e627e9 ]
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue.
Fixes: aa5fd0fb7748 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Cc: Boudewijn van der Heide <boudewijn@delta-utec.com>
Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31a7a0bbeb006bac2d9c81a2874825025214b6d8 ]
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a46 ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6cbba46934aefdfb5d171e0a95aec06c24f7ca30 ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873eeb ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8558aef4e8a1a83049ab906d21d391093cfa7e7f ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 926ede0c85e1e57c97d64d9612455267d597bb2c ]
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346c3 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed48a84a72fefb20a82dd90a7caa7807e90c6f66 ]
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b71370458 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cabd1a976375780dabab888784e356f574bbaed8 ]
skb_header_pointer() does not fully validate negative @offset values.
Use skb_header_pointer_careful() instead.
GangMin Kim provided a report and a repro fooling u32_classify():
BUG: KASAN: slab-out-of-bounds in u32_classify+0x1180/0x11b0
net/sched/cls_u32.c:221
Fixes: fbc2e7d9cf49 ("cls_u32: use skb_header_pointer() to dereference data safely")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Closes: https://lore.kernel.org/netdev/CANn89iJkyUZ=mAzLzC4GdcAgLuPnUoivdLaOs6B9rq5_erj76w@mail.gmail.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13e00fdc9236bd4d0bff4109d2983171fbcb74c4 ]
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cabd1a976375 ("net/sched: cls_u32: use skb_header_pointer_careful()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3a43633023e3cacaca60d4b8972d084a2b06236 ]
Reproducer:
1. server: directories are exported read-only
2. client: mount -t cifs //${server_ip}/export /mnt
3. client: dd if=/dev/zero of=/mnt/file bs=512 count=1000 oflag=direct
4. client: umount /mnt
5. client: sleep 1
6. client: modprobe -r cifs
The error message is as follows:
=============================================================================
BUG cifs_small_rq (Not tainted): Objects remaining on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Object 0x00000000d47521be @offset=14336
...
WARNING: mm/slub.c:1251 at __kmem_cache_shutdown+0x34e/0x440, CPU#0: modprobe/1577
...
Call Trace:
<TASK>
kmem_cache_destroy+0x94/0x190
cifs_destroy_request_bufs+0x3e/0x50 [cifs]
cleanup_module+0x4e/0x540 [cifs]
__se_sys_delete_module+0x278/0x400
__x64_sys_delete_module+0x5f/0x70
x64_sys_call+0x2299/0x2ff0
do_syscall_64+0x89/0x350
entry_SYSCALL_64_after_hwframe+0x76/0x7e
...
kmem_cache_destroy cifs_small_rq: Slab cache still has objects when called from cifs_destroy_request_bufs+0x3e/0x50 [cifs]
WARNING: mm/slab_common.c:532 at kmem_cache_destroy+0x16b/0x190, CPU#0: modprobe/1577
Link: https://lore.kernel.org/linux-cifs/9751f02d-d1df-4265-a7d6-b19761b21834@linux.dev/T/#mf14808c144448b715f711ce5f0477a071f08eaf6
Fixes: e255612b5ed9 ("cifs: Add fallback for SMB2 CREATE without FILE_READ_ATTRIBUTES")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6222883af286e2feb3c9ff2bf9fd8fdf4220c55a ]
Avoid registering kobjects with empty names when a BIOS attribute
name decodes to an empty string.
Fixes: a34fc329b1895 ("platform/x86: hp-bioscfg: bioscfg")
Reported-by: Alain Cousinie <alain.cousinie@laposte.net>
Closes: https://lore.kernel.org/platform-driver-x86/22ed5f78-c8bf-4ab4-8c38-420cc0201e7e@laposte.net/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260128190501.2170068-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39e9c376ac42705af4ed4ae39eec028e8bced9b4 ]
The PSS telemetry info parsing incorrectly applies
TELEM_INFO_SRAMEVTS_MASK when extracting event register
count from firmware response. This reads bits 15-8 instead
of the correct bits 7-0, causing misdetection of hardware
capabilities.
The IOSS path correctly uses TELEM_INFO_NENABLES_MASK for
register count. Apply the same mask to PSS parsing for
consistency.
Fixes: 9d16b482b059 ("platform:x86: Add Intel telemetry platform driver")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20251224061144.3925519-1-kaushlendra.kumar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 128497456756e1b952bd5a912cd073836465109d ]
toshiba_haps_add() leaks the haps object allocated by it if it returns
an error after allocating that object successfully.
toshiba_haps_remove() does not free the object pointed to by
toshiba_haps before clearing that pointer, so it becomes unreachable
allocated memory.
Address these memory leaks by using devm_kzalloc() for allocating
the memory in question.
Fixes: 23d0ba0c908a ("platform/x86: Toshiba HDD Active Protection Sensor")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f3d8ff31496874a69b131866f62474eb24ed20a ]
In reconfig, in case the driver asks to disconnect during the reconfig,
all the keys of the interface are marked as tainted.
Then ieee80211_reenable_keys will loop over all the interface keys, and
for each one it will
a) increment crypto_tx_tailroom_needed_cnt
b) call ieee80211_key_enable_hw_accel, which in turn will detect that
this key is tainted, so it will mark it as "not in hardware", which is
paired with crypto_tx_tailroom_needed_cnt incrementation, so we get two
incrementations for each tainted key.
Then we get a warning in ieee80211_free_keys.
To fix it, don't increment the count in ieee80211_reenable_keys for
tainted keys
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260118092821.4ca111fddcda.Id6e554f4b1c83760aa02d5a9e4e3080edb197aa2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db1d0b6ab11f612ea8a327663a578c8946efeee9 ]
We are not adding an interface if an existing one is doing CSA.
But the check won't work for MLO station interfaces, since for those,
vif->bss_conf is zeroed out.
Fix this by checking if any link of the vif has an active CSA.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260111191912.7ceff62fc561.Ia38d27f42684d1cfd82d930d232bd5dea6ab9282@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9411a89e9e7135cc459178fa77a3f1d6191ae903 ]
In iscsit_dec_conn_usage_count(), the function calls complete() while
holding the conn->conn_usage_lock. As soon as complete() is invoked, the
waiter (such as iscsit_close_connection()) may wake up and proceed to free
the iscsit_conn structure.
If the waiter frees the memory before the current thread reaches
spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function
attempts to release a lock within the already-freed connection structure.
Fix this by releasing the spinlock before calling complete().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b48fe9af1e60360baf09ca6b7a3cd6541f16e611 ]
Add a PCI quirk to enable microphone detection on the headphone jack of
TongFang X6AR55xU devices.
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260119151626.35481-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84dc6037390b8607c5551047d3970336cb51ba9a ]
In iscsit_dec_session_usage_count(), the function calls complete() while
holding the sess->session_usage_lock. Similar to the connection usage count
logic, the waiter signaled by complete() (e.g., in the session release
path) may wake up and free the iscsit_session structure immediately.
This creates a race condition where the current thread may attempt to
execute spin_unlock_bh() on a session structure that has already been
deallocated, resulting in a KASAN slab-use-after-free.
To resolve this, release the session_usage_lock before calling complete()
to ensure all dereferences of the sess pointer are finished before the
waiter is allowed to proceed with deallocation.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reported-by: Zhaojuan Guo <zguo@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3034bf0746d88a00cceda9541534a5721445a24 ]
An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f3f380ce6b3d5c9805c7e0b3d5bc28d9ec41e2e8 ]
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper').
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20260105031820.260119-1-kaushlendra.kumar@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
initialization
[ Upstream commit b062a899c997df7b9ce29c62164888baa7a85833 ]
In hisi_spi_debugfs_init, spi controller pointer is calculated
by container_of macro, and the member is hs->dev. But the host
cannot be calculated offset directly by this. (hs->dev) points
to (pdev->dev), and it is the (host->dev.parent) rather than
(host->dev) points to the (pdev->dev), which is set in
__spi_alloc_controller.
In this patch, this issues is fixed by getting the spi_controller
data from pdev->dev by dev_get_drvdata() directly. (dev->driver_data)
points to the spi controller data in the probe stage.
Signed-off-by: Devyn Liu <liudingyuan@h-partners.com>
Reviewed-by: Yang Shen <shenyang39@huawei.com>
Link: https://patch.msgid.link/20260108075323.3831574-1-liudingyuan@h-partners.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d89aad92cfd15edbd704746f44c98fe687f9366f ]
When scanning for the reset pin, we could get an -EPROBE_DEFER.
The driver would assume that no reset pin had been defined,
which would mean that the chip would never be powered.
Now we both respect any error we get from devm_gpiod_get_optional.
We also now properly report the missing GPIO definition when
'gpio_reset' is NULL.
Signed-off-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-3-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e29db1b08808f709231e6fd4c79dcdee5b17a17 ]
Add DMI match for ASUSTeK COMPUTER INC. M6500RE to enable the
internal microphone.
Signed-off-by: Radhi Bajahaw <bajahawradhi@gmail.com>
Link: https://patch.msgid.link/20260112203814.155-1-bajahawradhi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2fa8961d3a6a1c2395d8d560ffed2c782681bade ]
When the socket is closed while in TCP_LISTEN a callback is run to
flush all outstanding packets, which in turns calls
nvmet_tcp_listen_data_ready() with the sk_callback_lock held.
So we need to check if we are in TCP_LISTEN before attempting
to get the sk_callback_lock() to avoid a deadlock.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs-zu7eVB78yUpFjVe2UqMWFkLk8p+DaS3qj+uiGCXBAoA@mail.gmail.com/
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1877cc7270302081a315a81a0ee8331f19f95c8 ]
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5b577d214fcc109707bcb77b4ae72a31cfd86798 ]
The davinci_evm_probe() function calls of_parse_phandle() to acquire
device nodes for "ti,audio-codec" and "ti,mcasp-controller". These
functions return device nodes with incremented reference counts.
However, in several error paths (e.g., when the second of_parse_phandle(),
snd_soc_of_parse_card_name(), or devm_snd_soc_register_card() fails),
the function returns directly without releasing the acquired nodes,
leading to reference leaks.
This patch adds an error handling path 'err_put' to properly release
the device nodes using of_node_put() and clean up the pointers when
an error occurs.
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260107154836.1521-2-qikeyu2017@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a203dbeeca15a9b924f0d51f510921f4bae96801 ]
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6435ffd6c7fcba330dfa91c58dc30aed2df3d0bf ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c92488c ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85a866809333cd2bf8ddac93d9a3e3ba8e4f807d ]
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2497ff38c530b1af0df5130ca9f5ab22c5e92f29 ]
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c06bc3557542307b9658fbd43cc946a14250347b ]
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
