summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-06mwifiex: save driver information to file when firmware dumpXinming Hu5-1/+133
This patch adds support to dump driver information to a file when firmware dump happens. This information can be used to root casue FW crash. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move debug_data dump function to common utililty fileXinming Hu3-180/+198
mwifiex_debug_info also need be save to file when firmware dump happens. Move its dump implementation function to commmon utilility file, thus it can be reused in firmware dump function. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: move pm_wakeup_card_complete definition to usb.cXinming Hu2-7/+7
Move mwifiex_pm_wakeup_card_complete handler to source file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add rx histogram statistics supportXinming Hu10-0/+219
This patch add a new debugfs item histogram used for reporting rx data packet statitics(rx rate, snr, noise floor, signal strenth) to userspace. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: add bcn_rcv_cnt and bcn_miss_cnt in getlog debugfsXinming Hu4-2/+14
This patch add receive beacon count and miss beacon count statistics in debugfs getlog item. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: report tdls peers in debugfsXinming Hu6-1/+52
This patch add provision to show TDLS peer table in debugfs file. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06ath5k: drop owner assignment from platform_driversWolfram Sang1-1/+0
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: enable 802.11d support in firmwareArend van Spriel3-0/+29
When the driver gets beacon info containing a country IE from user-space upon .start_ap() callback, it will enable regulatory 802.11d support. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: signal completion of 802.1x.Hante Meuleman5-4/+57
Use cfg80211 change_station to signal the completion of 802.1x to firmware. This allows FW to take appropriate actions. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: follow user-space regulatory domain selectionArend van Spriel2-1/+38
When user-space uses a valid ISO-3166-1 country code for its regulatory domain selection, the driver will try to configure the firmware to use the same. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Change error log in standard log for rxbufpost.Hante Meuleman1-1/+1
When there is no room in the ring for rxbufpost an error is logged, however this happens quite frequently and can be considered normal and is certainly recoverable. This patch changes the erorr into a normal msgbuf log. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Fix WEP configuration for AP mode.Hante Meuleman4-30/+76
When a device is configured for AP mode and it is configured for WEP then the keys are plumbed first, followed by AP configuration. During configuration a down command is given to the firmware which will clear the configured keys. This patch reprograms the WEP keys after AP has been brought up. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: remove unused/duplicate defines in chip.cArend van Spriel1-14/+0
The source file chip.c contained some duplicate defines and some unused ones. Removing them. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06brcmfmac: Fix incorrect casting of 64 bit physical address.Hante Meuleman2-16/+16
The physical addresses being used by pcie and msgbuf were using a cast to long, which incorrectly caused it to limit the address to 32bit. Now explicit u64 is used where needed. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06Merge tag 'iwlwifi-next-for-kalle-2014-12-30' of ↵Kalle Valo38-317/+649
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * more work on d0i3 power state * enhancements to the firmware debugging infrastructure * support for 2 concurrent channel contexts * fixes / cleanups in the rate control * general cleanups
2015-01-03Merge branch 'timecounter-next'David S. Miller7-8/+11
Richard Cochran says: ==================== Fixing the "Time Counter fixes and improvements" For this series I had only tested the build with ARCH=x86 and arm, but others like sparc64, microblaze, powerpc, and s390 will fail because they somehow don't indirectly include clocksource.h for the drivers in question. This series fixes the build issues reported by: kbuild test robot <fengguang.wu@intel.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03microblaze: include the new timecounter header.Richard Cochran1-0/+1
The timecounter/cyclecounter code has moved, so users need the new include. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03mlx4: include clocksource.h againRichard Cochran1-0/+1
This driver uses the function, clocksource_khz2mult, and so it really must include clocksource.h. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03ixgbe: convert to CYCLECOUNTER_MASK macro.Richard Cochran1-1/+1
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03igb: convert to CYCLECOUNTER_MASK macro.Richard Cochran1-3/+2
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03e1000e: convert to CYCLECOUNTER_MASK macro.Richard Cochran1-2/+1
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03bnx2x: convert to CYCLECOUNTER_MASK macro.Richard Cochran1-1/+1
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03timecounter: provide a macro to initialize the cyclecounter mask field.Richard Cochran1-1/+4
There is no need for users of the timecounter/cyclecounter code to include clocksource.h just for a single macro. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03MAINTAINERS: Update Open vSwitch entry.Pravin B Shelar1-1/+2
OVS development is moved to netdev mailing list. Update tree and list in MAINTAINERS file. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03Merge tag 'wireless-drivers-next-for-davem-2015-01-02' of ↵David S. Miller36-1337/+510
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Changes: * ath9k: enable Transmit Power Control (TPC) for ar9003 chips * rtlwifi: cleanup and updates from the vendor driver * rsi: fix memory leak related to firmware image * ath: parameter fix for FCC DFS pattern Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03net: ethernet: cisco: enic: enic_dev: Remove some unused functionsRickard Strandqvist2-61/+0
Removes some functions that are not used anywhere: enic_dev_enable2_done() enic_dev_enable2() enic_dev_deinit_done() enic_dev_init_prov2() enic_vnic_dev_deinit() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03isdn: hisax: hfc4s8s_l1: Remove some unused functionsRickard Strandqvist1-21/+0
Removes some functions that are not used anywhere: Read_hfc32() Write_hfc32() Write_hfc16() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03net: fddi: skfp: smt.c: Remove unused functionRickard Strandqvist1-12/+0
Remove the function smt_ifconfig() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03net: ethernet: chelsio: cxgb3: mc5.c: Remove some unused functionsRickard Strandqvist1-16/+0
Removes some functions that are not used anywhere: dbgi_rd_rsp3() dbgi_wr_addr3() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-03net: skbuff: don't zero tc members when freeing skbFlorian Westphal1-7/+0
Not needed, only four cases: - kfree_skb (or one of its aliases). Don't need to zero, memory will be freed. - kfree_skb_partial and head was stolen: memory will be freed. - skb_morph: The skb header fields (including tc ones) will be copied over from the 'to-be-morphed' skb right after skb_release_head_state returns. - skb_segment: Same as before, all the skb header fields are copied over from the original skb right away. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02Merge branch 'for-upstream' of ↵David S. Miller37-1778/+3082
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg say: ==================== pull request: bluetooth-next 2014-12-31 Here's the first batch of bluetooth patches for 3.20. - Cleanups & fixes to ieee802154 drivers - Fix synchronization of mgmt commands with respective HCI commands - Add self-tests for LE pairing crypto functionality - Remove 'BlueFritz!' specific handling from core using a new quirk flag - Public address configuration support for ath3012 - Refactor debugfs support into a dedicated file - Initial support for LE Data Length Extension feature from Bluetooth 4.2 Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02geneve: Add Geneve GRO supportJoe Stringer1-2/+95
This results in an approximately 30% increase in throughput when handling encapsulated bulk traffic. Signed-off-by: Joe Stringer <joestringer@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net: Add Transparent Ethernet Bridging GRO support.Jesse Gross3-47/+102
Currently the only tunnel protocol that supports GRO with encapsulated Ethernet is VXLAN. This pulls out the Ethernet code into a proper layer so that it can be used by other tunnel protocols such as GRE and Geneve. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove hardcoded clock setting from xgmac_mdioShaohui Xie1-14/+0
There is no need to set the clock speed in read/write which will be performed unnecessarily for each mdio access. Init it during probe is enough. Also, the hardcoded clock value is not a proper way for all SoCs. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove irq assignment from xgmac_mdioShaohui Xie1-2/+1
Which is wrong and not used, so no extra space needed by mdiobus_alloc_size(), use mdiobus_alloc() instead. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net/fsl: remove reset from xgmac_mdioShaohui Xie1-19/+0
Since the reset is just clock setting, individual mdio reset is not available. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01Merge branch 'gmac-next'David S. Miller10-8/+633
Roger Chen says: ==================== support GMAC driver for RK3288 Roger Chen (6): patch1: add driver for Rockchip RK3288 SoCs integrated GMAC patch2: define clock ID used for GMAC patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC patch4: dts: rockchip: add gmac info for rk3288 patch5: dts: rockchip: enable gmac on RK3288 evb board patch6: add document for Rockchip RK3288 GMAC Tested on rk3288 evb board: Execute the following command to enable ethernet, set local IP and ping a remote host. busybox ifconfig eth0 up busybox ifconfig eth0 192.168.1.111 ping 192.168.1.1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01GMAC: add document for Rockchip RK3288 GMACRoger Chen1-0/+67
The document descripts how to add properties for GMAC in device tree. change since v2: 1. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting 2. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us" Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01ARM: dts: rockchip: enable gmac on RK3288 evb boardRoger Chen2-0/+40
enable gmac in rk3288-evb-rk808.dts changes since v2: 1. add fixed regulator for PHY 2. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting 3. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us" Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01ARM: dts: rockchip: add gmac info for rk3288Roger Chen1-0/+54
add gmac info in rk3288.dtsi for GMAC driver changes since v2: 1. add drive-strength in the pinctrl settings Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01GMAC: modify CRU config for Rockchip RK3288 SoCs integrated GMACRoger Chen1-7/+7
modify CRU config for GMAC driver changes since v2: 1. remove SCLK_MAC_PLL Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01GMAC: define clock ID used for GMACRoger Chen1-0/+3
changes since v2: 1. remove SCLK_MAC_PLL Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01GMAC: add driver for Rockchip RK3288 SoCs integrated GMACRoger Chen4-1/+462
This driver is based on stmmac driver. changes since v2: - use tab instead of space for macros - use HIWORD_UPDATE macro for GMAC_CLK_RX_DL_CFG and GMAC_CLK_TX_DL_CFG - remove drive-strength setting in the driver and set it in the pinctrl settings - use dev_err instead of pr_err - remove clock names's macros, just use the real name of the clock - use devm_clk_get() instead of clk_get() - remove clk_set_parent(bsp_priv->clk_mac, bsp_priv->clk_mac_pll) - remove gpio setting for LDO, just use regulator API - remove phy reset using gpio in the glue layer, it has been handled in the stmmac driver - remove handling phy interrupt (mii interrupt) changes since v1: - use BIT() to set register - combine two remap_write() operations into one for the same register - use macros for register value setting - remove grf fail check in rk_gmac_setup() and save all the check in set_rgmii_speed() - remove .tx_coe=1 in rk_gmac_data Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01igb_ptp: Include clocksource.h to get CLOCKSOURCE_MASK.David S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01e1000e: Include clocksource.h to get CLOCKSOURCE_MASK.David S. Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01Merge branch 'fib_trie-next'David S. Miller4-1071/+946
Alexander Duyck says: ==================== fib_trie: Reduce time spent in fib_table_lookup by 35 to 75% These patches are meant to address several performance issues I have seen in the fib_trie implementation, and fib_table_lookup specifically. With these changes in place I have seen a reduction of up to 35 to 75% for the total time spent in fib_table_lookup depending on the type of search being performed. On a VM running in my Corei7-4930K system with a trie of maximum depth of 7 this resulted in a reduction of over 370ns per packet in the total time to process packets received from an ixgbe interface and route them to a dummy interface. This represents a failed lookup in the local trie followed by a successful search in the main trie. Baseline Refactor ixgbe->dummy routing 1.20Mpps 2.21Mpps ------------------------------------------------------------ processing time per packet 835ns 453ns fib_table_lookup 50.1% 418ns 25.0% 113ns check_leaf.isra.9 7.9% 66ns -- -- ixgbe_clean_rx_irq 5.3% 44ns 9.8% 44ns ip_route_input_noref 2.9% 25ns 4.6% 21ns pvclock_clocksource_read 2.6% 21ns 4.6% 21ns ip_rcv 2.6% 22ns 4.0% 18ns In the simple case of receiving a frame and dropping it before it can reach the socket layer I saw a reduction of 40ns per packet. This represents a trip through the local trie with the correct leaf found with no need for any backtracing. Baseline Refactor ixgbe->local receive 2.65Mpps 2.96Mpps ------------------------------------------------------------ processing time per packet 377ns 337ns fib_table_lookup 25.1% 95ns 25.8% 87ns ixgbe_clean_rx_irq 8.7% 33ns 9.0% 30ns check_leaf.isra.9 7.2% 27ns -- -- ip_rcv 5.7% 21ns 6.5% 22ns These changes have resulted in several functions being inlined such as check_leaf and fib_find_node, but due to the code simplification the overall size of the code has been reduced. text data bss dec hex filename 16932 376 16 17324 43ac net/ipv4/fib_trie.o - before 15259 376 8 15643 3d1b net/ipv4/fib_trie.o - after Changes since RFC: Replaced this_cpu_ptr with correct call to this_cpu_inc in patch 1 Changed test for leaf_info mismatch to (key ^ n->key) & li->mask_plen in patch 10 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01fib_trie: Add tracking value for suffix lengthAlexander Duyck1-6/+116
This change adds a tracking value for the maximum suffix length of all prefixes stored in any given tnode. With this value we can determine if we need to backtrace or not based on if the suffix is greater than the pos value. By doing this we can reduce the CPU overhead for lookups in the local table as many of the prefixes there are 32b long and have a suffix length of 0 meaning we can immediately backtrace to the root node without needing to test any of the nodes between it and where we ended up. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01fib_trie: Remove checks for index >= tnode_child_length from tnode_get_childAlexander Duyck1-9/+5
For some reason the compiler doesn't seem to understand that when we are in a loop that runs from tnode_child_length - 1 to 0 we don't expect the value of tn->bits to change. As such every call to tnode_get_child was rerunning tnode_chile_length which ended up consuming quite a bit of space in the resultant assembly code. I have gone though and verified that in all cases where tnode_get_child is used we are either winding though a fixed loop from tnode_child_length - 1 to 0, or are in a fastpath case where we are verifying the value by either checking for any remaining bits after shifting index by bits and testing for leaf, or by using tnode_child_length. size net/ipv4/fib_trie.o Before: text data bss dec hex filename 15506 376 8 15890 3e12 net/ipv4/fib_trie.o After: text data bss dec hex filename 14827 376 8 15211 3b6b net/ipv4/fib_trie.o Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01fib_trie: inflate/halve nodes in a more RCU friendly wayAlexander Duyck1-121/+115
This change pulls the node_set_parent functionality out of put_child_reorg and instead leaves that to the function to take care of as well. By doing this we can fully construct the new cluster of tnodes and all of the pointers out of it before we start routing pointers into it. I am suspecting this will likely fix some concurency issues though I don't have a good test to show as such. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-01fib_trie: Push tnode flushing down to inflate/halveAlexander Duyck1-53/+50
This change pushes the tnode freeing down into the inflate and halve functions. It makes more sense here as we have a better grasp of what is going on and when a given cluster of nodes is ready to be freed. I believe this may address a bug in the freeing logic as well. For some reason if the freelist got to a certain size we would call synchronize_rcu(). I'm assuming that what they meant to do is call synchronize_rcu() after they had handed off that much memory via call_rcu(). As such that is what I have updated the behavior to be. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>