summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-26scsi: Revert "scsi: hisi_sas: Drain bcast events in hisi_sas_rescan_topology()"Jie Zhan1-7/+0
This reverts commit 11ff0c98fca35df16c84d4eee52008faecaf10a6. Draining or flushing events in hisi_sas_rescan_topology() can hang the driver, typically with phy up or phy down events being processed, i.e. sas_porte_bytes_dmaed() or sas_phye_loss_of_signal(). Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com> Link: https://lore.kernel.org/r/20221118083714.4034612-2-zhanjie9@hisilicon.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ufs: ufs-mediatek: Modify the return valueChanWoo Lee1-1/+1
Be consistent with the rest of driver wrt. functions returning bool. 91: return !!(host->caps & UFS_MTK_CAP_BOOST_CRYPT_ENGINE); 98: return !!(host->caps & UFS_MTK_CAP_VA09_PWR_CTRL); 105: return !!(host->caps & UFS_MTK_CAP_BROKEN_VCC); Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20221118045242.2770-1-cw9316.lee@samsung.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ufs: ufs-mediatek: Remove unneeded codeChanWoo Lee1-2/+0
Remove unnecessary if/goto code. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20221118044136.921-1-cw9316.lee@samsung.com Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: device_handler: alua: Call scsi_device_put() from non-atomic contextBart Van Assche1-8/+19
Since commit f93ed747e2c7 ("scsi: core: Release SCSI devices synchronously"), scsi_device_put() might sleep. Avoid calling it from alua_rtpg_queue() with the pg_lock held. The lock only pretects h->pg, anyway. To avoid the pg being freed under us, because of a race with another thread, take a temporary reference. In alua_rtpg_queue(), verify that the pg still belongs to the sdev being passed before actually queueing the RTPG. This patch fixes the following smatch warning: drivers/scsi/device_handler/scsi_dh_alua.c:1013 alua_rtpg_queue() warn: sleeping in atomic context alua_check_vpd() <- disables preempt -> alua_rtpg_queue() -> scsi_device_put() Cc: Martin Wilck <mwilck@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Sachin Sant <sachinp@linux.ibm.com> Cc: Benjamin Block <bblock@linux.ibm.com> Suggested-by: Martin Wilck <mwilck@suse.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221117183626.2656196-3-bvanassche@acm.org Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: device_handler: alua: Revert "Move a scsi_device_put() call out of ↵Bart Van Assche1-15/+8
alua_check_vpd()" There is a bug in commit 0b25e17e9018 ("scsi: alua: Move a scsi_device_put() call out of alua_check_vpd()"): that patch may cause alua_rtpg_queue() callers to call scsi_device_put() even if that function should not be called. Revert that commit to prepare for a different solution. Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Sachin Sant <sachinp@linux.ibm.com> Cc: Benjamin Block <bblock@linux.ibm.com> Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reported-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221117183626.2656196-2-bvanassche@acm.org Tested-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: snic: Fix possible UAF in snic_tgt_create()Gaosheng Cui1-0/+3
Smatch reports a warning as follows: drivers/scsi/snic/snic_disc.c:307 snic_tgt_create() warn: '&tgt->list' not removed from list If device_add() fails in snic_tgt_create(), tgt will be freed, but tgt->list will not be removed from snic->disc.tgt_list, then list traversal may cause UAF. Remove from snic->disc.tgt_list before free(). Fixes: c8806b6c9e82 ("snic: driver for Cisco SCSI HBA") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117035100.2944812-1-cuigaosheng1@huawei.com Acked-by: Narsimhulu Musini <nmusini@cisco.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: qla2xxx: Initialize vha->unknown_atio_[list, work] for NPIV hostsGleb Chesnokov1-0/+3
Initialization of vha->unknown_atio_list and vha->unknown_atio_work only happens for base_vha in qlt_probe_one_stage1(). But there is no initialization for NPIV hosts that are created in qla24xx_vport_create(). This causes a crash when trying to access these NPIV host fields. Fix this by adding initialization to qla_vport_create(). Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev> Link: https://lore.kernel.org/r/376c89a2-a9ac-bcf9-bf0f-dfe89a02fd4b@scst.dev Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: qla2xxx: Remove duplicate of vha->iocb_work initializationGleb Chesnokov1-1/+0
Commit 9b3e0f4d4147 ("scsi: qla2xxx: Move work element processing out of DPC thread") introduced the initialization of vha->iocb_work in qla2x00_create_host() function. This initialization is also called from qla2x00_probe_one() function, just after qla2x00_create_host(). Hence remove this duplicate call since it has already been called before. Signed-off-by: Gleb Chesnokov <gleb.chesnokov@scst.dev> Link: https://lore.kernel.org/r/822b3823-f344-67d6-30f1-16e31cf68eed@scst.dev Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: fcoe: Fix transport not deattached when fcoe_if_init() failsChen Zhongjin1-0/+1
fcoe_init() calls fcoe_transport_attach(&fcoe_sw_transport), but when fcoe_if_init() fails, &fcoe_sw_transport is not detached and leaves freed &fcoe_sw_transport on fcoe_transports list. This causes panic when reinserting module. BUG: unable to handle page fault for address: fffffbfff82e2213 RIP: 0010:fcoe_transport_attach+0xe1/0x230 [libfcoe] Call Trace: <TASK> do_one_initcall+0xd0/0x4e0 load_module+0x5eee/0x7210 ... Fixes: 78a582463c1e ("[SCSI] fcoe: convert fcoe.ko to become an fcoe transport provider driver") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221115092442.133088-1-chenzhongjin@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: sd: Use 16-byte SYNCHRONIZE CACHE on ZBC devicesShin'ichiro Kawasaki3-5/+15
ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE(16) for host-managed zoned block devices, but does not mandate SYNCHRONIZE CACHE(10). Call SYNCHRONIZE CACHE(16) in place of SYNCHRONIZE CACHE(10) to ensure that the command is always supported. For this purpose, add use_16_for_sync flag to struct scsi_device in same manner as use_16_for_rw flag. To be precise, ZBC does not mandate SYNCHRONIZE CACHE(16) for host-aware zoned block devices. However, modern devices should support 16-byte commands. Hence, call SYNCHRONIZE CACHE (16) on both types of ZBC devices, host-aware and host-managed. Of note is that READ(16) and WRITE(16) have same story and they are already called for both types of ZBC devices. Another note is that this patch depends on the fix commit ea045fd344cb ("ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure"). Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20221115002905.1709006-1-shinichiro.kawasaki@wdc.com Reviewed-by: Damien Le Moal <damien.lemoal@opendource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ipr: Fix WARNING in ipr_init()Shang XiaoJing1-1/+9
ipr_init() will not call unregister_reboot_notifier() when pci_register_driver() fails, which causes a WARNING. Call unregister_reboot_notifier() when pci_register_driver() fails. notifier callback ipr_halt [ipr] already registered WARNING: CPU: 3 PID: 299 at kernel/notifier.c:29 notifier_chain_register+0x16d/0x230 Modules linked in: ipr(+) xhci_pci_renesas xhci_hcd ehci_hcd usbcore led_class gpu_sched drm_buddy video wmi drm_ttm_helper ttm drm_display_helper drm_kms_helper drm drm_panel_orientation_quirks agpgart cfbft CPU: 3 PID: 299 Comm: modprobe Tainted: G W 6.1.0-rc1-00190-g39508d23b672-dirty #332 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:notifier_chain_register+0x16d/0x230 Call Trace: <TASK> __blocking_notifier_chain_register+0x73/0xb0 ipr_init+0x30/0x1000 [ipr] do_one_initcall+0xdb/0x480 do_init_module+0x1cf/0x680 load_module+0x6a50/0x70a0 __do_sys_finit_module+0x12f/0x1c0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f72919ec2bbb ("[SCSI] ipr: implement shutdown changes and remove obsolete write cache parameter") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20221113064513.14028-1-shangxiaojing@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: scsi_debug: Fix possible name leak in sdebug_add_host_helper()Yang Yingliang1-1/+4
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, it needs be freed when device_register() returns error. As comment of device_register() says, one should use put_device() to give up the reference in the error path. Fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and sdbg_host is freed in sdebug_release_adapter(). When the device release is not set, it means the device is not initialized. We can not call put_device() in this case. Use kfree() to free memory. Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221112131010.3757845-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: fcoe: Fix possible name leak when device_register() failsYang Yingliang1-9/+10
If device_register() returns an error, the name allocated by dev_set_name() needs to be freed. As the comment of device_register() says, one should use put_device() to give up the reference in the error path. Fix this by calling put_device(), then the name can be freed in kobject_cleanup(). The 'fcf' is freed in fcoe_fcf_device_release(), so the kfree() in the error path can be removed. The 'ctlr' is freed in fcoe_ctlr_device_release(), so don't use the error label, just return NULL after calling put_device(). Fixes: 9a74e884ee71 ("[SCSI] libfcoe: Add fcoe_sysfs") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221112094310.3633291-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: scsi_debug: Fix a warning in resp_report_zones()Harshit Mogalapalli1-1/+1
As 'alloc_len' is user controlled data, if user tries to allocate memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and messes up dmesg with a warning. Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. Fixes: 7db0e0c8190a ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221112070612.2121535-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: scsi_debug: Fix a warning in resp_verify()Harshit Mogalapalli1-1/+1
As 'vnum' is controlled by user, so if user tries to allocate memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it creates a stack trace and messes up dmesg with a warning. Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. Fixes: c3e2fe9222d4 ("scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221112070031.2121068-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: efct: Fix possible memleak in efct_device_init()Chen Zhongjin1-0/+1
In efct_device_init(), when efct_scsi_reg_fc_transport() fails, efct_scsi_tgt_driver_exit() is not called to release memory for efct_scsi_tgt_driver_init() and causes memleak: unreferenced object 0xffff8881020ce000 (size 2048): comm "modprobe", pid 465, jiffies 4294928222 (age 55.872s) backtrace: [<0000000021a1ef1b>] kmalloc_trace+0x27/0x110 [<000000004c3ed51c>] target_register_template+0x4fd/0x7b0 [target_core_mod] [<00000000f3393296>] efct_scsi_tgt_driver_init+0x18/0x50 [efct] [<00000000115de533>] 0xffffffffc0d90011 [<00000000d608f646>] do_one_initcall+0xd0/0x4e0 [<0000000067828cf1>] do_init_module+0x1cc/0x6a0 ... Fixes: 4df84e846624 ("scsi: elx: efct: Driver initialization routines") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Link: https://lore.kernel.org/r/20221111074046.57061-1-chenzhongjin@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ufs: core: Fix unnecessary operation for early returnChanWoo Lee1-5/+5
Setting bitmap_len is not required when returning early. Defer until it is needed. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20221111062301.7423-1-cw9316.lee@samsung.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ufs: core: Switch 'check_for_bkops' to boolChanWoo Lee1-2/+2
Only checks true and false so it can be converted to bool. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20221111062209.7365-1-cw9316.lee@samsung.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: ufs: core: Separate function name and messageChanWoo Lee2-6/+6
Separate the function name and message to make it easier to check the log. Modify messages to fit the format of others. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Link: https://lore.kernel.org/r/20221111062126.7307-1-cw9316.lee@samsung.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: hpsa: Fix possible memory leak in hpsa_add_sas_device()Yang Yingliang1-1/+3
If hpsa_sas_port_add_rphy() returns an error, the 'rphy' allocated in sas_end_device_alloc() needs to be freed. Address this by calling sas_rphy_free() in the error path. Fixes: d04e62b9d63a ("hpsa: add in sas transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221111043012.1074466-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: hpsa: Fix error handling in hpsa_add_sas_host()Yang Yingliang1-1/+2
hpsa_sas_port_add_phy() does: ... sas_phy_add() -> may return error here sas_port_add_phy() ... Whereas hpsa_free_sas_phy() does: ... sas_port_delete_phy() sas_phy_delete() ... If hpsa_sas_port_add_phy() returns an error, hpsa_free_sas_phy() can not be called to free the memory because the port and the phy have not been added yet. Replace hpsa_free_sas_phy() with sas_phy_free() and kfree() to avoid kernel crash in this case. Fixes: d04e62b9d63a ("hpsa: add in sas transport class") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221110151129.394389-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-26scsi: mpt3sas: Fix possible resource leaks in mpt3sas_transport_port_add()Yang Yingliang1-0/+2
In mpt3sas_transport_port_add(), if sas_rphy_add() returns error, sas_rphy_free() needs be called to free the resource allocated in sas_end_device_alloc(). Otherwise a kernel crash will happen: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 45 PID: 37020 Comm: bash Kdump: loaded Tainted: G W 6.1.0-rc1+ #189 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_rphy_remove+0x50/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_rphy_remove+0x38/0x78 [scsi_transport_sas] sas_port_delete+0x30/0x148 [scsi_transport_sas] do_sas_phy_delete+0x78/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x30/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] scsih_remove+0xd8/0x420 [mpt3sas] Because transport_add_device() is not called when sas_rphy_add() fails, the device is not added. When sas_rphy_remove() is subsequently called to remove the device in the remove() path, a NULL pointer dereference happens. Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109032403.1636422-1-yangyingliang@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: hpsa: Fix possible memory leak in hpsa_init_one()Yuan Can1-1/+1
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to clean1 directly, which frees h and leaks the h->reply_map. Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead free h directly. Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failedWenchao Hao1-2/+1
If scsi_dispatch_cmd() failed, the SCSI command was not sent to the target. scsi_queue_rq() would return BLK_STS_RESOURCE if scsi_dispatch_cmd() failed, and the related request would be requeued. The timeout of this request would not fire, so noone would increase iodone_cnt. Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Link: https://lore.kernel.org/r/20221123122137.150776-3-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: core: Increase scsi_device's iodone_cnt in scsi_timeout()Wenchao Hao1-0/+1
If a SCSI command times out and is going to be aborted, we should increase the iodone_cnt of the related scsi_device. Otherwise the iodone_cnt would be smaller than iorequest_cnt. Increasing iodone_cnt in scsi_timeout() would not cause a double accounting issue. Brief analysis follows: - We add the iodone_cnt when BLK_EH_DONE is returned in scsi_timeout(). The related command's timeout event would not happen. - If the abort succeeds and the command is not retried, the command would be completed with scsi_finish_command() which would not increase iodone_cnt. - If the abort succeeds and the command is retried, it would be requeue. A scsi_dispatch_cmd() would be called and iorequest_cnt would be increased again. - If the abort fails, the error handler successfully recovers the device, and the command is not retried, the command would be completed with scsi_finish_command() which would not increase iodone_cnt. - If the abort fails, the error handler successfully recovers the device, and the command is retried, the iorequest_cnt would be increased again. Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Link: https://lore.kernel.org/r/20221123122137.150776-2-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: iscsi: Rename iscsi_set_param() to iscsi_if_set_param()Wenchao Hao1-2/+2
There are two iscsi_set_param() functions defined in libiscsi.c and scsi_transport_iscsi.c respectively which is confusing. Rename the one in scsi_transport_iscsi.c to iscsi_if_set_param(). Signed-off-by: Wenchao Hao <haowenchao@huawei.com> Link: https://lore.kernel.org/r/20221122181105.4123935-1-haowenchao@huawei.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Fix hard lockup when executing a compare-and-write commandMaurizio Lombardi1-6/+16
While handling an I/O completion for the compare portion of a COMPARE_AND_WRITE command, it may happen that the compare_and_write_callback function submits new bio structs while still in softirq context. Low level drivers like md raid5 do not expect their make_request call to be used in softirq context, they call into schedule() and create a deadlocked system. __schedule at ffffffff873a0807 schedule at ffffffff873a0cc5 raid5_get_active_stripe at ffffffffc0875744 [raid456] raid5_make_request at ffffffffc0875a50 [raid456] md_handle_request at ffffffff8713b9f9 md_make_request at ffffffff8713bacb generic_make_request at ffffffff86e6f14b submit_bio at ffffffff86e6f27c iblock_submit_bios at ffffffffc0b4e4dc [target_core_iblock] iblock_execute_rw at ffffffffc0b4f3ce [target_core_iblock] __target_execute_cmd at ffffffffc1090079 [target_core_mod] compare_and_write_callback at ffffffffc1093602 [target_core_mod] target_cmd_interrupted at ffffffffc108d1ec [target_core_mod] target_complete_cmd_with_sense at ffffffffc108d27c [target_core_mod] iblock_complete_cmd at ffffffffc0b4e23a [target_core_iblock] dm_io_dec_pending at ffffffffc00db29e [dm_mod] clone_endio at ffffffffc00dbf07 [dm_mod] raid5_align_endio at ffffffffc086d6c2 [raid456] blk_update_request at ffffffff86e6d950 scsi_end_request at ffffffff87063d48 scsi_io_completion at ffffffff87063ee8 blk_complete_reqs at ffffffff86e77b05 __softirqentry_text_start at ffffffff876000d7 This problem appears to be an issue between target_cmd_interrupted() and compare_and_write_callback(). target_cmd_interrupted() calls the se_cmd's transport_complete_callback function pointer if the se_cmd is being stopped or aborted, and CMD_T_ABORTED was set on the se_cmd. When calling compare_and_write_callback(), the success parameter was set to false. target_cmd_interrupted() seems to expect this means the callback will do cleanup that does not require a process context. But compare_and_write_callback() ignores the parameter if there was I/O done for the compare part of COMPARE_AND_WRITE. Since there was data, the function continued on, passed the compare, and issued a write while ignoring the value of the success parameter. The submit of a bio for the write portion of the COMPARE_AND_WRITE then causes schedule to be unsafely called from the softirq context. Fix the bug in compare_and_write_callback by jumping to the out label if success == "false", after checking if we have been called by transport_generic_request_failure(); The command is being aborted or stopped so there is no need to submit the write bio for the write part of the COMPARE_AND_WRITE command. Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20221121092703.316489-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: iscsi: Fix a race condition between login_work and the login ↵Maurizio Lombardi1-2/+10
thread In case a malicious initiator sends some random data immediately after a login PDU; the iscsi_target_sk_data_ready() callback will schedule the login_work and, at the same time, the negotiation may end without clearing the LOGIN_FLAGS_INITIAL_PDU flag (because no additional PDU exchanges are required to complete the login). The login has been completed but the login_work function will find the LOGIN_FLAGS_INITIAL_PDU flag set and will never stop from rescheduling itself; at this point, if the initiator drops the connection, the iscsit_conn structure will be freed, login_work will dereference a released socket structure and the kernel crashes. BUG: kernel NULL pointer dereference, address: 0000000000000230 PF: supervisor write access in kernel mode PF: error_code(0x0002) - not-present page Workqueue: events iscsi_target_do_login_rx [iscsi_target_mod] RIP: 0010:_raw_read_lock_bh+0x15/0x30 Call trace: iscsi_target_do_login_rx+0x75/0x3f0 [iscsi_target_mod] process_one_work+0x1e8/0x3c0 Fix this bug by forcing login_work to stop after the login has been completed and the socket callbacks have been restored. Add a comment to clearify the return values of iscsi_target_do_login() Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20221115125638.102517-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Change the way target_xcopy_do_work() sets restiction on ↵Anastasia Kovaleva2-45/+54
max I/O To determine how many blocks sends in one command, the minimum value is selected from the hw_max_sectors of both devices. In target_xcopy_do_work, hw_max_sectors are used as blocks, not sectors; it also ignores the fact that sectors can be of different sizes, for example 512 and 4096 bytes. Because of this, a number of blocks can be transmitted that the device will not be able to accept. Change the selection of max transmission size into bytes. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-4-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Make hw_max_sectors store the sectors amount in blocksAnastasia Kovaleva1-1/+3
By default, hw_max_sectors stores its value in 512 blocks in iblock, despite the fact that the block size can be 4096 bytes. Change hw_max_sectors to store the number of sectors in hw_block_size blocks. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-3-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: target: core: Send max transfer length in blocksAnastasia Kovaleva4-5/+5
A MAXIMUM TRANSFER LENGTH value indicates the maximum transfer length in logical blocks that the device server accepts for a single command. Fix function sending the length in sectors instead of blocks. This patch also removes the special casing for fileio in block_size_store since this logic in now unified in spc_emulate_evpd_b0() for all backends. Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com> Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Anastasia Kovaleva <a.kovaleva@yadro.com> Link: https://lore.kernel.org/r/20221114102500.88892-2-a.kovaleva@yadro.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: lpfc: Remove linux/msi.h includeThomas Gleixner1-1/+0
Nothing in this file needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20221113202428.436270297@linutronix.de Cc: James Smart <james.smart@broadcom.com> Cc: Dick Kennedy <dick.kennedy@broadcom.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-24scsi: lpfc: Update lpfc version to 14.2.0.9Justin Tee1-1/+1
Update lpfc version to 14.2.0.9. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Fix crash involving race between FLOGI timeout and devloss handlerJustin Tee2-15/+57
When a FLOGI completes with a sequence timeout error, a freed kref ptr dereference crash can occur due to a timing race involving ndlp referencing in lpfc_dev_loss_tmo_callbk. Fix by ensuring the driver accounts for an outstanding FLOGI when dev_loss is active. Also, don't remove the HBA_FLOGI_OUTSTANDING flag when the FLOGI is retried to allow the driver to handle the reference counts correctly in lpfc_dev_loss_tmo_handler. Reported-by: Dietmar Hahn <dietmar.hahn@fujitsu.com> Tested-by: Dietmar Hahn <dietmar.hahn@fujitsu.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Fix MI capability display in cmf_info sysfs attributeJustin Tee3-1/+5
The dynamic mi_ver value holds the currently configured MI setting. mi_ver was being displayed as part of the cmf_info sysfs attribute, when the output string meant to display MI capabilities instead. Add a mi_cap member in the lpfc_pc_sli4_params structure that will store MI capabilities during initialization so that cmf_info prints out capabilities instead of current configuration. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Correct bandwidth logging during receipt of congestion sync WCQEJustin Tee1-0/+6
The lpfc_cmf_timer adjusts phba->cmf_link_byte_count periodically and can artifically inflate bandwidth percent. During bandwidth calculation, correct for this by setting a cap of logging a maximum of 100%. Bandwidth calculation is only used for display under LOG_CGN_MGMT so there is no expectation of impacts on performance. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Fix WQ|CQ|EQ resource checkJustin Tee1-7/+5
Adapter configurations with limited EQ resources may fail to initialize. Firmware resources are queried in lpfc_sli4_read_config(). The driver parameters cfg_irq_chann and cfg_hdw_queue are adjusted from defaults if constrained by firmware resources. The minimum resource check includes a special allocation for queues such as ELS, MBOX, NVME LS. However the additional reservation was also incorrectly applied to EQ resources. Reordered WQ|CQ|EQ resource checks to apply the special allocation adjustment to WQ and CQ resources only. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20221116011921.105995-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: bfa: Replace one-element array with flexible-array memberGustavo A. R. Silva1-1/+1
One-element arrays are deprecated, and we are replacing them with flexible array members instead. So, replace one-element array with flexible-array member in struct fdmi_attr_s. Important to mention is that doing a build before/after this patch results in no binary output differences. This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/209 Link: https://github.com/KSPP/linux/issues/79 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/Y3P1rEEBq7HzJygq@work Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: libfc: Remove redundant variable ev_qualColin Ian King1-3/+0
Variable ev_qual is being assigned and modified but the end result is never used. The variable is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221111170824.558250-1-colin.i.king@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Use memset_startat() helperXiu Jianfeng1-4/+2
Use memset_startat() helper to simplify the code, no functional changes in this patch. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20221111074310.132125-1-xiujianfeng@huawei.com Reviewed-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: scsi_debug: Fix a warning in resp_write_scat()Harshit Mogalapalli1-1/+1
As 'lbdof_blen' is coming from user, if the size in kzalloc() is >= MAX_ORDER then we hit a warning. Call trace: sg_ioctl sg_ioctl_common scsi_ioctl sg_scsi_ioctl blk_execute_rq blk_mq_sched_insert_request blk_mq_run_hw_queue __blk_mq_delay_run_hw_queue __blk_mq_run_hw_queue blk_mq_sched_dispatch_requests __blk_mq_sched_dispatch_requests blk_mq_dispatch_rq_list scsi_queue_rq scsi_dispatch_cmd scsi_debug_queuecommand schedule_resp resp_write_scat If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc() will definitely fail. It creates a stack trace and messes up dmesg. The user controls the size here so if they specify a too large size it will fail. Add __GFP_NOWARN in order to avoid too large allocation warning. This is detected by static analysis using smatch. Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Change version to 2.1.20-035Don Brace1-3/+3
Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Gerry Morong <gerry.morong@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793533417.322537.3074216622272955440.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Initialize feature section infoDon Brace1-1/+1
Initialize features to 0 before processing. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793532902.322537.2436075977808555348.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Add controller cache flush during rmmodGilbert Wu1-0/+8
Add in a call to flush the controller cache during driver removal. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793532388.322537.878022136408270892.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Correct device removal for multi-actuator devicesKumar Meiyappan2-10/+25
Correct device count for multi-actuator drives which can cause kernel panics. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike Mcgowan <mike.mcgowan@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Kumar Meiyappan <Kumar.Meiyappan@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793531872.322537.9003385780343419275.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Change sysfs raid_level attribute to N/A for controllersKevin Barnett1-1/+1
Change the sysfs raid_level attribute from "RAID-0" to N/A. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mike McGowan <mike.mcgowan@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793531357.322537.8639138137605612362.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Correct max LUN numberKevin Barnett1-1/+0
Correct maximum LUN number for multi-actuator devices. When multi-actuator support was added to smartpqi, the maximum number of LUNs supported for multi-actuator devices was supposed to be changed from unlimited to 256, but the setting was inadvertently left at unlimited. Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793530842.322537.816949081443241857.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Add new controller PCI IDsMike McGowen1-0/+44
All PCI ID entries in Hex. Add PCI IDs for ByteDance controllers: VID / DID / SVID / SDID ---- ---- ---- ---- ByteHBA JGH43024-8 9005 / 028f / 1e93 / 1000 ByteHBA JGH43034-8 9005 / 028f / 1e93 / 1001 ByteHBA JGH44014-8 9005 / 028f / 1e93 / 1002 Add PCI IDs for new Inspur controllers: VID / DID / SVID / SDID ---- ---- ---- ---- INSPUR RT0800M7E 9005 / 028f / 1bd4 / 0086 INSPUR RT0800M7H 9005 / 028f / 1bd4 / 0087 INSPUR RT0804M7R 9005 / 028f / 1bd4 / 0088 INSPUR RT0808M7R 9005 / 028f / 1bd4 / 0089 Add PCI IDs for new FAB A controllers: VID / DID / SVID / SDID ---- ---- ---- ---- Adaptec SmartRAID 3254-16e /e 9005 / 028f / 9005 / 1475 Adaptec HBA 1200-16e 9005 / 028f / 9005 / 14c3 Adaptec HBA 1200-8e 9005 / 028f / 9005 / 14c4 Add H3C controller PCI IDs: VID / DID / SVID / SDID ---- ---- ---- ---- H3C H4508-Mf-8i 9005 / 028f / 193d / 110b Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Signed-off-by: Mike McGowen <mike.mcgowen@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793530327.322537.6056884426657539311.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: smartpqi: Convert to host_tagsetDon Brace2-28/+43
Add support for host_tagset. Also move the reserved command slots to the end of the pool to eliminate an addition operation for every SCSI request. This patch was originally authored by Hannes Reinecke here: Link: https://lore.kernel.org/linux-block/20191126131009.71726-8-hare@suse.de/ But we NAKed this patch because we wanted to fully test multipath failover operations. Suggested-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Scott Benesh <scott.benesh@microchip.com> Reviewed-by: Scott Teel <scott.teel@microchip.com> Reviewed-by: Mahesh Rajashekhara <Mahesh.Rajashekhara@microchip.com> Reviewed-by: Mike McGowen <Mike.McGowen@microchip.com> Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com> Signed-off-by: Don Brace <don.brace@microchip.com> Link: https://lore.kernel.org/r/166793529811.322537.3294617845448383948.stgit@brunhilda Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-17scsi: lpfc: Remove redundant pointer 'lp'Colin Ian King1-5/+0
Pointer lp is being initialized and incremented but the result is never read. The pointer is redundant and can be removed. Once lp is removed, pcmd is not longer used. So remove pcmd as well Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Link: https://lore.kernel.org/r/20221108183620.93978-1-jsmart2021@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-06 19:08:11 +0300