| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 876e78104f23ce9267822757a63562a609b126c3 ]
Because some transports don't have a dedicated type for ISO packets
(see 14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type
when in fact they are ISO packets.
In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.
Fixes: 14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c44a431d62bf4a20d7b901f98266ae3f4676d48 ]
The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.
According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command
This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."
If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.
If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.
Fixes: 9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2624b445544ffc1472ccabfb6ec867c199d4c95c ]
Reference count of acls will leak when memory allocation fails. Fix this
by adding the missing posix_acl_release().
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 342edb60dcda7a409430359b0cac2864bb9dfe44 ]
Smatch static checker warning:
fs/ksmbd/vfs.c:1040 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'length'
fs/ksmbd/vfs.c:1041 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'start'
Fix unexpected result that could caused from negative start and length.
Fixes: f44158485826 ("cifsd: add file operations")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d74ec97131b1179a373b6d521f195c84e894eb6 ]
Smatch static checker warning:
fs/ksmbd/smb2pdu.c:7759 smb2_ioctl()
warn: no lower bound on 'off'
Fix unexpected result that could caused from negative off and bfz.
Fixes: b5e5f9dfc915 ("ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6214894f49a967c749ee6c07cb00f9cede748df4 ]
The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.
Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.
Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.
Fixes: b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb765a743377d46d8da8e7f7e5128022504741b9 ]
Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.
Fix by storing the local port in u16, as is done in the rest of the
code.
Fixes: bf73904f5fba ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit aa01c67de5926fdb276793180564f172c55fb0d7 ]
The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.
Fixes: fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4107b8746d93ace135b8c4da4f19bbae81db785f ]
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.
Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6acc72a43eac78a309160d0a7512bbc59bcdd757 ]
The blamed commit changed struct ocelot_stat_layout :: "u32 offset" to
"u32 reg".
However, "u32 reg" is not quite a register address, but an enum
ocelot_reg, which in itself encodes an enum ocelot_target target in the
upper bits, and an index into the ocelot->map[target][] array in the
lower bits.
So, whereas the previous code comparison between stats_layout[i].offset
and last + 1 was correct (because those "offsets" at the time were
32-bit relative addresses), the new code, comparing layout[i].reg to
last + 4 is not correct, because the "reg" here is an enum/index, not an
actual register address.
What we want to compare are indeed register addresses, but to do that,
we need to actually go through the same motions as
__ocelot_bulk_read_ix() itself.
With this bug, all statistics counters are deemed by
ocelot_prepare_stats_regions() as constituting their own region.
(Truncated) log on VSC9959 (Felix) below (prints added by me):
Before:
region of 1 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x001]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x002]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x041]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x042]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x081]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x0ac]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x100]
region of 1 contiguous counters starting with SYS:STAT:CNT[0x101]
...
region of 1 contiguous counters starting with SYS:STAT:CNT[0x111]
After:
region of 67 contiguous counters starting with SYS:STAT:CNT[0x000]
region of 45 contiguous counters starting with SYS:STAT:CNT[0x080]
region of 18 contiguous counters starting with SYS:STAT:CNT[0x100]
Since commit d87b1c08f38a ("net: mscc: ocelot: use bulk reads for
stats") intended bulking as a performance improvement, and since now,
with trivial-sized regions, performance is even worse than without
bulking at all, this could easily qualify as a performance regression.
Fixes: d4c367650704 ("net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8e50ed774554f93d55426039b27b1e38d7fa64d8 ]
Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().
Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()
syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000
Fixes: 1baf5ebf8954 ("erspan: auto detect truncated packets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4fe3c88552a3fbe1944426a4506a18cdeb457b5a ]
There are memory leaks reported by kmemleak:
unreferenced object 0xffff888106500800 (size 128):
comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
[<000000006efb048e>] local_pci_probe+0xeb/0x1a0
...
unreferenced object 0xffff888106500b00 (size 128):
comm "modprobe", pid 1017, jiffies 4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff . =...... =.....
f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00 .#=...... =.....
backtrace:
[<00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
[<00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]
The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.
Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 032a954061afd4b7426c3eb6bfd2952ef1e9a384 ]
When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 640fcdbcf27fc62de9223f958ceb4e897a00e791 ]
The error handling dereferences "vport". There is nothing we can do if
it is an error pointer except returning the error code.
Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44d553188c38ac74b799dfdcebafef2f7bb70942 ]
When ETS configurations are queried by the user to get the mapping
assignment between packet priority and traffic class, only priorities up
to maximum TCs are queried from QTCT register in FW to retrieve their
assigned TC, leaving the rest of the priorities mapped to the default
TC #0 which might be misleading.
Fix by querying the TC mapping of all priorities on each ETS query,
regardless of the maximum number of TCs configured in FW.
Fixes: 820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7e3fce82d945cf6e7f99034b113ff2d250d7524d ]
First ASO WQE poll causes a cache miss in hardware hence the resut is
delayed. It causes to the situation where such WQE is polled earlier
than it is needed.
Add logic to retry ASO CQ polling operation.
Fixes: 739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 922f56e9a795d6f3dd72d3428ebdd7ee040fa855 ]
vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.
Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.
Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84
Fixes: a35f71f27a61 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 662404b24a4c4d839839ed25e3097571f5938b9b ]
Upon entering switchdev mode, VF/SF representors are spawned in the
devlink instance's net namespace, whereas the PF net device transforms
into the uplink representor, remaining in the net namespace the PF net
device was in. Therefore, if a PF net device's namespace is different from
its parent devlink net namespace, entering switchdev mode can create an
illegal situation where all representors sharing the same core device
are NOT in the same net namespace.
To avoid this issue, block entering switchdev mode for devices whose child
netdev net namespace has diverged from the parent devlink's.
Fixes: 7768d1971de6 ("net/mlx5: E-Switch, Add control for encapsulation")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c83172b0639c8a005c0dd3b36252dc22ddd9f19c ]
Previously, NETNS_LOCAL was not set for uplink representors, inconsistent
with VF representors, and allowed the uplink representor to be moved
between net namespaces and separated from the VF representors it shares
the core device with. Such usage would break the isolation model of
namespaces, as devices in different namespaces would have access to
shared memory.
To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is
in switchdev mode.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 10ec8ca8ec1a2f04c4ed90897225231c58c124a7 ]
We've seen recent AWS EKS (Kubernetes) user reports like the following:
After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
clusters after a few days a number of the nodes have containers stuck
in ContainerCreating state or liveness/readiness probes reporting the
following error:
Readiness probe errored: rpc error: code = Unknown desc = failed to
exec in container: failed to start exec "4a11039f730203ffc003b7[...]":
OCI runtime exec failed: exec failed: unable to start container process:
unable to init seccomp: error loading seccomp filter into kernel:
error loading seccomp filter: errno 524: unknown
However, we had not been seeing this issue on previous AMIs and it only
started to occur on v20230217 (following the upgrade from kernel 5.4 to
5.10) with no other changes to the underlying cluster or workloads.
We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=452534528)
which helped to immediately allow containers to be created and probes to
execute but after approximately a day the issue returned and the value
returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
was steadily increasing.
I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.
The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.
Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.
Fixes: fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c672297bbc0e86dbf88396b8053e2fbb173f16ff ]
Initialize to zero structures to build a valid
Tx Packet used for the filter programming.
Fixes: a9219b332f52 ("i40e: VLAN field for flow director")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e264be98b88a6d6f476c11087fe865696e8bef5 ]
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.
Pid 1 is hung in iavf_remove(), part of a network driver:
PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow"
#0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb
#1 [ffffaad04005fae8] schedule at ffffffff8b323e2d
#2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc
#3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930
#4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf]
#5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513
#6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa
#7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc
#8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e
#9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429
#10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4
#11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice]
#12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice]
#13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice]
#14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1
#15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386
#16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870
#17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6
#18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159
#19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc
#20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d
#21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169
#22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b
RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7
RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead
RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90
R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005
R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000
ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b
During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.
Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().
Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Fixes: a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <mcornea@redhat.com>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 83b49e7f63da88a1544cba2b2e40bfabb24bd203 ]
Setting trust on VF should return EINVAL when there is no VF. Move
checking for switchdev mode after checking if VF exists.
Fixes: c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 47f9e4c924025c5be87959d3335e66fcbb7f6b5c ]
The key which gets cached in task structure from a kernel thread does not
get invalidated even after expiry. Due to which, a new key request from
kernel thread will be served with the cached key if it's present in task
struct irrespective of the key validity. The change is to not cache key in
task_struct when key requested from kernel thread so that kernel thread
gets a valid key on every key request.
The problem has been seen with the cifs module doing DNS lookups from a
kernel thread and the results getting pinned by being attached to that
kernel thread's cache - and thus not something that can be easily got rid
of. The cache would ordinarily be cleared by notify-resume, but kernel
threads don't do that.
This isn't seen with AFS because AFS is doing request_key() within the
kernel half of a user thread - which will do notify-resume.
Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: keyrings@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAGypqWw951d=zYRbdgNR4snUDvJhWL=q3=WOyh7HhSJupjz2vA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b69245126a48e50882021180fa5d264dc7149ccc ]
Since commit 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes: 6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f038f3917baf04835ba2b7bcf2a04ac93fbf8a9c ]
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.
Fixes: 5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bebe933d35a63d4f042fbf4dce4f22e689ba0fcd ]
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7f247f5a2c18b3f21206cdd51193df4f38e1b9f5 ]
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b6bc5b8bd2d4ca9e1efa9ae0f98a0b0687ace75 ]
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev
Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a8eff03545d4cef12ae66a1905627c1818a0f81a ]
We collect the software statistics counters for RX bytes (reported to
/proc/net/dev and to ethtool -S $dev | grep 'rx_bytes: ") at a time when
skb->len has already been adjusted by the eth_type_trans() ->
skb_pull_inline(skb, ETH_HLEN) call to exclude the L2 header.
This means that when connecting 2 DSA interfaces back to back and
sending 1 packet with length 100, the sending interface will report
tx_bytes as incrementing by 100, and the receiving interface will report
rx_bytes as incrementing by 86.
Since accounting for that in scripts is quirky and is something that
would be DSA-specific behavior (requiring users to know that they are
running on a DSA interface in the first place), the proposal is that we
treat it as a bug and fix it.
This design bug has always existed in DSA, according to my analysis:
commit 91da11f870f0 ("net: Distributed Switch Architecture protocol
support") also updates skb->dev->stats.rx_bytes += skb->len after the
eth_type_trans() call. Technically, prior to Florian's commit
a86d8becc3f0 ("net: dsa: Factor bottom tag receive functions"), each and
every vendor-specific tagging protocol driver open-coded the same bug,
until the buggy code was consolidated into something resembling what can
be seen now. So each and every driver should have its own Fixes: tag,
because of their different histories until the convergence point.
I'm not going to do that, for the sake of simplicity, but just blame the
oldest appearance of buggy code.
There are 2 ways to fix the problem. One is the obvious way, and the
other is how I ended up doing it. Obvious would have been to move
dev_sw_netstats_rx_add() one line above eth_type_trans(), and below
skb_push(skb, ETH_HLEN). But DSA processing is not as simple as that.
We count the bytes after removing everything DSA-related from the
packet, to emulate what the packet's length was, on the wire, when the
user port received it.
When eth_type_trans() executes, dsa_untag_bridge_pvid() has not run yet,
so in case the switch driver requests this behavior - commit
412a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") has the
details - the obvious variant of the fix wouldn't have worked, because
the positioning there would have also counted the not-yet-stripped VLAN
header length, something which is absent from the packet as seen on the
wire (there it may be untagged, whereas software will see it as
PVID-tagged).
Fixes: f613ed665bb3 ("net: dsa: Add support for 64-bit statistics")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 59ad01c786a4c94afacc7feb0ab97bf8d6672a46 ]
When we change the M/N values seamlessly during a fastset we should
also update the vblank timestamping stuff to make sure the vblank
timestamp corrections/guesstimations come out exact.
Note that only crtc_clock and framedur_ns can actually end up
changing here during fastsets. Everything else we touch can
only change during full modesets.
Technically we should try to do this exactly at the start of
vblank, but that would require some kind of double buffering
scheme. Let's skip that for now and just update things right
after the commit has been submitted to the hardware. This
means the information will be properly up to date when the
vblank irq handler goes to work. Only if someone ends up
querying some vblanky stuff in between the commit and start
of vblank may we see a slight discrepancy.
Also this same problem really exists for the DRRS downclocking
stuff. But as that is supposed to be more or less transparent
to the user, and it only drops to low gear after a long delay
(1 sec currently) we probably don't have to worry about it.
Any time something is actively submitting updates DRRS will
remain in high gear and so the timestamping constants will
match the hardware state.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310235828.17439-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8cb1f95cca68421b08333175719fdd3615372ca8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8d62aa8d24d9883df738e450bfe6be396e11979 ]
Use hex format so that it is easier to decode.
Fixes: fe5979665f64 ("drm/i915/debugfs: Add perf_limit_reasons in debugfs")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230315022906.2467408-1-vinay.belgaumkar@intel.com
(cherry picked from commit 5e008ba67cb80084e99b40ccd46f9029ae421632)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 150784f9285e656373cf3953ef4a7663f1e1a0f2 ]
Probe pseudo errors should be injected only in places where real errors
can be encountered, otherwise unwinding code can be broken.
Placing intel_uc_init_late before i915_inject_probe_error violated
this rule, resulting in following bug:
__intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt))
Fixes: 481d458caede ("drm/i915/guc: Add golden context to GuC ADS")
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com
(cherry picked from commit c4252a11131c7f27a158294241466e2a4e7ff94e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8df23e4c4f72f4e201c28e6fb0a67e2dbf30628a ]
Error captures are tagged with an 'ecode'. This is a pseduo-unique magic
number that is meant to distinguish similar seeming bugs with
different underlying signatures. It is a combination of two ring state
registers. Unfortunately, the register state being used is only valid
in execlist mode. In GuC mode, the register state exists in a separate
list of arbitrary register address/value pairs rather than the named
entry structure. So, search through that list to find the two exciting
registers and copy them over to the structure's named members.
v2: if else if instead of if if (Alan)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes: a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com
(cherry picked from commit 9724ecdbb9ddd6da3260e4a442574b90fc75188a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 583ebae783b8241a30581c084ad6226051b594c5 ]
The GuC specific register state entry in the error capture object was
just called 'capture'. Although the companion 'node' entry was called
'guc_capture_node'. Rename the base entry to be 'guc_capture' instead
so that it is a) more consistent and b) more obvious what it is.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-9-John.C.Harrison@Intel.com
Stable-dep-of: 8df23e4c4f72 ("drm/i915/guc: Fix missing ecodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 088a422c3fa3ee9268d400078626b0c202cfe9dd ]
The Wa_14017073508 require to send Media Busy/Idle mailbox while
accessing Media tile. As of now it is getting handled while __gt_unpark,
__gt_park. But there are various corner cases where forcewakes are taken
without __gt_unpark i.e. without sending Busy Mailbox especially during
register reads. Forcewakes are taken without busy mailbox leads to
GPU HANG. So bringing mailbox calls under forcewake calls are no feasible
option as forcewake calls are atomic and mailbox calls are blocking.
The issue already fixed in B step so disabling MC6 on A step and
reverting previous commit which handles Wa_14017073508
Fixes: 8f70f1ec587d ("drm/i915/mtl: Add Wa_14017073508 for SAMedia")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310061339.2495416-2-badal.nilawar@intel.com
(cherry picked from commit 038a24835ab68f341eaa7a0e3bcc6ce0f9b22e17)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed00eba03474adbf525ff03d69705d8c78b76456 ]
lock the fbdev obj before calling into
i915_vma_pin_iomap(). This helps to solve below :
<7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[ 93.581844] ------------[ cut here ]------------
<4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915]
Fixes: f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.")
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
(cherry picked from commit 561b31acfd65502a2cda2067513240fc57ccdbdc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d206b1ea9f48433a96edec7028586db1d947911 ]
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit 332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
Before:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
0
After:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
255
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
[1] https://lore.kernel.org/netdev/ZA3CFNhU4AbtsP4G@shredder/
Fixes: a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44a29a4dab73411671e0b84817a5f07e291b1501 ]
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20221014073253.3719911-2-daniel.lezcano@linaro.org
Stable-dep-of: 6d206b1ea9f4 ("mlxsw: core_thermal: Fix fan speed in maximum cooling state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 070246e4674b125860d311c18ce2623e73e2bd51 ]
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes: 7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30b605b8501e321f79e19c3238aa6ca31da6087c ]
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr>
Fixes: 803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99669259f3361d759219811e670b7e0742668556 ]
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4203d84032e28f893594a453bd8bc9c3b15c7334 ]
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes: 5c5f626bcace ("net: phy: improve handling link_change_notify callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8d20c3ded59a092532513c9bd030d1ea66f5f44 ]
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
CPU0 CPU1
|xirc2ps_tx_timeout_task
xirc2ps_detach |
free_netdev |
kfree(dev); |
|
| do_reset
| //use dev
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25143b6a01d0cc5319edd3de22ffa2578b045550 ]
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Fixes: 733def6a04bf ("qed*: IOV link control")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb684408f3ea4856639675d6465f0024e498e4b1 ]
Instead of using the SMBIOS type 1 record 'family' field, which is often
modified by OEMs, use the type 4 'processor ID' and 'processor version'
fields, which are set to a small set of probe-able values on all known
Ampere EFI systems in the field.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Tested-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34343eb06afc04af9178a9883d9354dc12beede0 ]
The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.
Fixes: 550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ff821092cf02a70c2bccd2d19269f01e29aa52cf ]
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30796d0dcb6e41c6558a07950f2ce60c209da867 ]
CPU port should also be enabled in order to get a working switch.
Fixes: a5538a777b73 ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
