summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-08-24carl9170: improve site surveyChristian Lamparter5-15/+153
The firmware keeps track of channel usage. This data can be used by the automatic channel selection to find the *best* channel. Survey data from wlan22 frequency: 2412 MHz [in use] noise: -86 dBm channel active time: 3339608 ms channel busy time: 270982 ms channel transmit time: 121515 ms Survey data from wlan22 frequency: 2417 MHz noise: -86 dBm channel active time: 70 ms channel busy time: 2 ms channel transmit time: 1 ms Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24carl9170: import updated firmware headersChristian Lamparter2-2/+13
Import new headers from our firmware branch: git://git.kernel.org/pub/scm/linux/kernel/git/chr/carl9170fw.git Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24carl9170: fix timekeeping for HW_COUNTER firmwaresChristian Lamparter3-5/+8
AR9170_PWR_REG_PLL_ADDAC is used to set the main clock divisor which affects the AHB/CPU speed. Because this would interfere with the firmware internal timekeeping, the function has to be moved into the firmware. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24libertas: handle mesh networks in lbs_iface_active()Dan Carpenter1-2/+2
There was an extra semicolon so the if condition wasn't used. We checked "priv->dev" twice instead of "priv->mesh_dev". Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: add init tablesRafał Miłecki3-0/+451
They were taken from MMIO dump with few RegExps and vim. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: switch analogRafał Miłecki2-1/+13
Analog is switched on right after reading PHY version: read16 0xfaafc3e0 -> 0xa801 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0000 Switched off after after killing radio: >>> Switch Radio(OFF) end phy_read(0x043c) -> 0x0000 phy_write(0x043c) <- 0x0007 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0007 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: implement disabling radioRafał Miłecki2-0/+32
wl reads radio version, then disables it. That's how we found it in MMIO dump: radio_read(0x0000) -> 0x0031 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0001) -> 0x0064 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0002) -> 0x0020 <-- RADIO READ WITHOUT 0x200 SET! read32 0xfaafc120 -> 0x04000400 phy_read(0x044d) -> 0x0000 phy_write(0x044d) <- 0x0000 phy_read(0x044c) -> 0x1fff phy_write(0x044c) <- 0x1fff phy_read(0x04b7) -> 0x0000 phy_write(0x04b7) <- 0x0000 phy_read(0x04b1) -> 0x0000 phy_write(0x04b1) <- 0x0000 phy_read(0x04b0) -> 0x7dff phy_write(0x04b0) <- 0x7dff phy_read(0x04fa) -> 0x0000 phy_write(0x04fa) <- 0x0000 phy_read(0x04f9) -> 0x007f phy_write(0x04f9) <- 0x007f Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: add very basic PHY opsRafał Miłecki2-3/+53
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: fix DMA on some bugged hardwareRafał Miłecki3-36/+84
Some hardware with 64-bit DMA uses lower address word for setting routing (translation) bit. Add workaround for such boards. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ssb: fix DMA translation for some specific boardsRafał Miłecki1-3/+21
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: remove a bogus WARN_ONFelix Fietkau1-2/+2
On embedded hardware it's normal to not have a PCI device for the PCI bridge that the wifi card is attached to. pdev->bus->self will be NULL in that case. In that case, simply return without emitting an useless kernel stack trace. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Dump modal noisefloor calibration historyRajkumar Manoharan1-0/+55
Debugfs file location: <debugfs_mnt>/ieee80211/phy#/ath9k/dump_nfcal Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Fix invalid noisefloor reading due to channel updateRajkumar Manoharan1-3/+14
While switching b/w HT20/40, the current channel's nf values are updated into history buffer. Since the current channel's channel type, channel flag got updated before reading nf value from hw. This channel type mismatch is causing invalid readings when hw is on ht20 but getnf tries to read on extn chains. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Fix noisefloor history update for extn chainsRajkumar Manoharan1-2/+1
Before doing hw reset the current channel's noisefloor readings are updated into history buffer. The extension chain's readings are considered only if the current channel was configured in HT40. While moving from HT40 to HT20, the extn chain's readings are skipped though the current channel is in ht40. This patch updates extn chain reading based on channel flag. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Move ath9k_init_crypto to commonRajkumar Manoharan6-48/+30
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Remove SC_OP_ENABLE_APMRajkumar Manoharan3-9/+4
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k_hw: Remove unnecessary chainmask configurationRajkumar Manoharan3-18/+1
The chainmasks were already configured at process_ini before doing init calibration. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: qinfo never be NULL in setuptxqueueRajkumar Manoharan1-15/+2
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Remove unused argument tsf from ath9k_hw_rxprocdescRajkumar Manoharan3-4/+4
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Re-enable RXOEL interrupt after processing rx buffersRajkumar Manoharan1-0/+5
Once RXEOL was disabled, it never be enabled again. This patch re-enables rxeol at the end of rx tasklet. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k: Fix rx overrun interrupt stormRajkumar Manoharan1-5/+3
Whenever RXEOL is received, both RXORN and RXEOL got cleared to avoid rx overrun interrupt storm. This was handled only for edma chips. The same scenario was also observered with AR9280, doing frequent channel type switch b/w HT20/40 with bidi traffic that is causing failure to stop rx dma. This patch clears the RXEOL & RXORN interrupts for all chips. ath: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000062c0 ath: Could not stop RX, we could be confusing the DMA engine when we start RX up ------------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/ath9k/recv.c:532 ath_stoprecv+0x110/0x120 [ath9k]() Call Trace: [<ffffffff8104a55a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff8104a5a5>] warn_slowpath_null+0x15/0x20 [<ffffffffa0560380>] ath_stoprecv+0x110/0x120 [ath9k] [<ffffffffa055e6fa>] ath_reset+0x6a/0x200 [ath9k] Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24ath9k_hw: Fix exceed transmission burst-time of 5GHzRajkumar Manoharan2-29/+15
The WAR which adds extra delimiters when using RTS/CTS with aggregation and non-enterprise AR9003 chips. This extra padding is done after doing all the 4ms limit checks and hence the total aggregate sizes are exceeding the allowed duration. This patch limits the aggregate sizes appropriately after including these extra delimiters. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace make meshif mesh gateJavier Cardona7-1/+29
Allow userspace to set NL80211_MESHCONF_GATE_ANNOUNCEMENTS attribute, which will advertise this mesh node as being a mesh gate. NL80211_HWMP_ROOTMODE must be set or this will do nothing. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,cfg,mac}80211: let userspace set RANN intervalJavier Cardona9-6/+27
Allow userspace to set Root Announcement Interval for our mesh interface. Also, RANN interval is now in proper units of TUs. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24{nl,mac}80211: add missing root mode meshconf entriesJavier Cardona2-1/+2
This fix allows userspace to mark a meshif as a root node. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: mesh gate implementationJavier Cardona6-9/+335
In this implementation, a mesh gate is a root node with a certain bit set in its RANN flags. The mpath to this root node is marked as a path to a gate, and added to our list of known gates for this if_mesh. Once a path discovery process fails, we forward the unresolved frames to a known gate. Thanks to Luis Rodriguez for refactoring and bug fix help. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: fix mesh path flushingJavier Cardona1-2/+1
Previously, mpaths were never flushed since the mpath is not active once we call this function. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: mesh locking fixesJavier Cardona1-2/+2
mesh_queue_preq is invoked invoked from both user (work queue) and softirq (timer) context, so the _bh version of spinlock needs to be used. Also, the mpath->state_lock should be softirq safe as well. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: fix mpath timer NULL functionJavier Cardona1-2/+4
If we have an mpath whose timer has not been initialized, don't try to delete it. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24mac80211: improve mpath debuggingJavier Cardona3-11/+31
make hwmp_dbg print the relevant sdata->name by default and improve formatting. Also add mpath_dbg macro for debugging of mesh path operations. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: HT-PHY: allow writing longer tables with a single callRafał Miłecki2-0/+46
Sometimes we need to write table which is 2-10 elements long. It's easier to create such a function instead of defining array every time. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add missing small-tables writesRafał Miłecki1-3/+30
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22rtlwifi: add module parameter to set global debug levelStefan Assmann1-1/+5
No need to recompile the module anymore to set the debug level. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add some AFE (Analog Frontend) operationRafał Miłecki1-0/+26
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: add missing PHY mask/set opsRafał Miłecki1-5/+41
MMIO hacks were used to trick ndis&wl. For example following: phy_read(0x0280) -> 0xffff phy_write(0x0280) <- 0xff3e *** phy_read(0x0280) -> 0x0000 phy_write(0x0280) <- 0x003e was translated to mask 0xff00 and set 0x3e. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: init BPHY and upload 0x1a tableRafał Miłecki3-0/+68
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: copy tables and reset CCARafał Miłecki2-0/+25
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: implement few simple PHY writesRafał Miłecki1-0/+22
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: HT-PHY: init: zero EXTG registersRafał Miłecki1-0/+22
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mwl8k: Traffic to clients gets affected when one client leaves a cyrpto bssNishant Sarmukadam1-3/+0
When a client disassociates from a crypto enabled bss, data traffic to other clients connected to the bss is stalled. This was due to a boolean variable used to keep track if HW crypto is enabled i.e. if set key has been called to add a key. This flag was being reset every time delete key was called e.g when a station leaves the bss. Once the flag is reset, rx status flags were not being set for connected clients which disrupts traffic to these clients. Fix this issue by not resetting the flag since we do not need to reset this flag during the life time of the bss. Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh path selection frame formatThomas Pedersen6-48/+62
Make mesh path selection frames Mesh Action category, remove outdated Mesh Path Selection category and defines, use updated reason codes, add mesh_action_is_path_sel for readability, and update/correct path selection IEs. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ieee80211: add mesh action codesThomas Pedersen1-0/+15
Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh peering frame formatThomas Pedersen6-66/+79
This patch updates the mesh peering frames to the format specified in the recently ratified 802.11s standard. Several changes took place to make this happen: - Change RX path to handle new self-protected frames - Add new Peering management IE - Remove old Peer Link IE - Remove old plink_action field in ieee80211_mgmt header These changes by themselves would either break peering, or work by coincidence, so squash them all into this patch. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: update mesh peering frame codesThomas Pedersen1-81/+76
Have the mesh peering frames use the self-protected action and reason codes specified in 802.11s and defined in ieee80211.h. Remove the local enums. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22ieee80211: introduce Self Protected Action codesThomas Pedersen1-0/+14
802.11s introduces a new action frame category, add action codes as well as an entry in ieee80211_mgmt. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22mac80211: fix mesh beacon formatThomas Pedersen4-62/+196
Correct ordering of IEs in the mesh beacon while removing unneeded IEs from mesh peering frames. Set privacy bit in capability info if security is enabled. Add utility functions to aid in construction of IEs and reduce code duplication. Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: make forcing clock common (HT-PHY also uses that)Rafał Miłecki3-36/+38
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: include HT-PHY in some common codeRafał Miłecki2-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22bcma: implement BCM4331 workaround for external PA linesRafał Miłecki3-1/+43
We need to disable ext. PA lines for reading SPROM. It's disabled by default, but this patch allows using bcma after loading wl, which leaves workaround enabled. Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-22b43: support new RX header, noticed to be used in 598.314+ fwRafał Miłecki5-13/+58
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-06 14:35:19 +0300