summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-08-29cnic: Put uio init in separate function.Michael Chan1-27/+41
This will allow the 10G iSCSI code to reuse the function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29cnic: Put rx/tx ring allocation in separate function.Michael Chan1-11/+22
This will allow the 10G iSCSI code to reuse the function. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29ipv4: af_inet.c cleanupsEric Dumazet1-57/+55
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: use proc_create_data()Alexey Dobriyan1-2/+4
It looks like after rename device proc entry is unusable, because of no ->read_proc or ->proc_fops. And create_proc_entry() is deprecated. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: increase versionStephen Hemminger1-6/+10
Increase module version, and cleanup module info. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: cleanup checkpatch warningsStephen Hemminger1-139/+159
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: use common idle routineStephen Hemminger1-10/+4
Simpler to have one place that spins and accounts for delays, this will also make the last packet be detected faster for more repeatable timing. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: spin using hrtimerStephen Hemminger2-21/+30
This changes how the pktgen thread spins/waits between packets if delay is configured. It uses a high res timer to wait for time to arrive. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: convert to use ktime_tStephen Hemminger1-100/+84
The kernel ktime_t is a nice generic infrastructure for mananging high resolution times, as is done in pktgen. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: avoid calling gettimeofdayStephen Hemminger1-7/+9
If not using delay then no need to update next_tx after each packet sent. This allows pktgen to send faster especially on systems with slower clock sources. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: reorganize transmit loopStephen Hemminger1-12/+14
Handle standard (and non-standard) return values in a switch. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: use netdev_alloc_skbStephen Hemminger1-4/+6
netdev_alloc_skb is NUMA node aware. Also, don't exhaust atomic emergency pool. Don't want pktgen to cause OOM behaviour. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: cleanup clone count testStephen Hemminger1-17/+15
The if statement to test for "should a new packet be used" can be simplified. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: xmit logic reorganizationStephen Hemminger1-31/+24
Do some reorganization of transmit logic path: * move transmit queue full idle to separate routine * add a cpu_relax() * eliminate some of the uneeded goto's * if queue is still stopped, go back to main thread loop. * don't give up transmitting if quantum is exhausted (be greedy) Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: stop_device cleanupStephen Hemminger1-9/+3
All the callers were freeing skb after stopping device. Remove unneeded forward decl. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: mark read-only/mostly variablesStephen Hemminger1-5/+5
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: change inliningStephen Hemminger1-8/+7
Don't force inlining where not needed. Gcc does better job of deciding to inline local functions. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29pktgen: minor cleanupStephen Hemminger1-16/+9
A couple of minor functions can be written more compactly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29qlge: Move TX completions from workqueue to NAPI.Ron Mercer2-136/+137
TX completions were running in a workqueue queued by the ISR. This patch moves the processing of TX completions to an existing RSS NAPI context. Now each irq vector runs NAPI for one RSS ring and one or more TX completion rings. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29qlge: Allow running MSIx with fewer vectors.Ron Mercer1-47/+38
Currently we downshift to MSI/Legacy if we don't get enough vectors for cpu_count RSS rings plus cpu_count TX completion rings. This patch allows running MSIX with the vector count that the platform provides. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29qlge: Get rid of 'default' rx_ring type.Ron Mercer4-64/+28
Currently we have three types of RX rings. 1) Default ring - services rx_ring for broadcast/multicast, handles firmware events, and errors. 2) TX completion ring - handles only outbound completions. 3) RSS ring - handles only inbound completions. This patch gets rid of the default ring type and moves it's functionality into the first RSS ring. This makes better use of MSIX vectors since they are a limited resource on some platforms. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29Merge branch 'master' of ↵David S. Miller100-2659/+4299
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-08-29bonding: Have bond_check_dev_link examine netif_runningPetri Gynther1-0/+3
bonding: Have bond_check_dev_link examine netif_running Some network devices do not call netif_carrier_off when they are set administratively down. Have the bonding link check function also inspect the netif_running state. Ignore netif_running if the bond_check_dev_link function is called with "reporting" set, as in that case it's inspecting the capabilities of the non-netif_carrier device driver. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29bonding: Fix useless test: int > INT_MAXNicolas de Pesloüan1-1/+1
max_bonds is of type int and cannot be greater than INT_MAX. Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29bonding: use compare_ether_addrStephen Hemminger1-4/+2
Bonding can use compare_ether_addr() in bond_release. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-29bonding: propogate vlan_features to bonding masterJay Vosburgh1-0/+6
Propogate the vlan_features of the slave devices to the bonding master device, using the same logic as for regular features. Tested by Or Gerlitz <ogerlitz@voltaire.com>, who also removed the debug logic from the original test patch. Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28libertas: add NULL check on return value of get_zeroed_pageKiran Divekar1-0/+28
Most of the places in debugfs.c are missing a NULL check on the return value of get_zeroed_page API call. Added required NULL check at appropriate places. Signed-off-by: Kiran Divekar <kirandivekar@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: use cfg80211_wext_handlerJussi Kivilinna1-421/+0
Now that cfg80211 functions are added and wext converted to use wext-compat functions, remove wext structures and disabled code. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: disable IWEVPMKIDCAND wireless eventJussi Kivilinna1-2/+5
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: convert mic failure wireless event to cfg80211Jussi Kivilinna1-15/+17
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: remove unneeded SIOCSIWCOMMITJussi Kivilinna1-8/+0
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: rename wireless stats worker to device pollerJussi Kivilinna1-17/+19
Stats worker no longer poll stats from device anymore. It's still needed to poll device control channel for connect/disconnect events, so rename stats worker as device poller. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 dump_stationJussi Kivilinna1-0/+20
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 get_stationJussi Kivilinna1-61/+57
Add cfg80211 get_station and convert SIOCGIWRATE and get_wireless_stats to cfg80211. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 key handlingJussi Kivilinna1-30/+103
Add cfg80211 add_key/del_key/set_default_key and convert wext to use theim. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 set_channelJussi Kivilinna1-90/+15
Add cfg80211 set_channel and convert wext to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: add cfg80211 connect, disconnect, join_ibss and leave_ibssJussi Kivilinna1-209/+460
Add cfg80211 connect functions for station and ad-hoc modes and convert wext to use theim. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: enable infrastructure before setting random essidJussi Kivilinna1-0/+6
Random essid must be set to turn on radio when not connected. If device is in ad-hoc mode, this results 'media connect' indications with the random essid which should be ignored. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: set ieee80211_ptr->iftype in rndis_change_virtual_intfJussi Kivilinna1-1/+4
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: use is_zero_ether_addr() and is_broadcast_ether_addr()Jussi Kivilinna1-11/+6
Use is_zero_ether_addr() and is_broadcast_ether_addr() instead of memcmp against ffff_bssid/zero_bssid. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: move link up/down work to separate functionsJussi Kivilinna1-46/+55
Move link up/down work to separate functions and use local array for allocating memory for info structure instead of kzmalloc. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: increase scan timer delayJussi Kivilinna1-1/+1
Increase scan delay from 1 sec to 6 sec. Spec says that scan by OID_802_11_BSSID_LIST_SCAN completes in 6 seconds. Before rfkill patch too short delay was not problem as device was always active (radio on) and performing background scanning. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: resize bssid list if too smallJussi Kivilinna1-2/+15
Buffer used for bssid list might be too small. Change rndis_query_oid() to return required buffer length to caller and make rndis_check_bssid_list() resize buffer when needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: get bssid scan list before new scanJussi Kivilinna1-0/+6
OID_802_11_BSSID_LIST_SCAN clears device's bssid list, so retrieve current bssid list from device before issuing new scan. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28rndis_wlan: ignore OID_802_11_ADD_KEY triggered media connect indicationsJussi Kivilinna1-0/+17
Setting WPA keys with OID_802_11_ADD_KEY sometimes trigger instant media connect indication. These indications are extranous and should be ignored, as otherwise driver would send reassociation event to userspace which in this case is not needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: Implement antenna diversity support for LP-PHYGábor Stefanik5-9/+17
The A/G-PHY changes are fallout fixes from the enum change, which in turn allows the LP-PHY code to be much simpler. The antenna_to_phyctl change is a fix for a potential existing bug that this patch may otherwise trigger. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: Enable LP-PHY support by default and remove Kconfig warningGábor Stefanik1-3/+1
The most common LP-PHY device, BCM4312, is now fully functional. So, no need to say "probably won't work for you" anymore. It's also not "for debuggers and developers only", as it is perfectly usable for end-users now (at least for BCM4312). Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath5k: don't use PCI ID to find the chip revisionPavel Roskin3-25/+29
AR5K_SREV is available even if the chip has been put to sleep. Relying on the chip register allows binding non-standard PCI IDs by echo VENDOR_ID PRODUCT_ID >/sys/bus/pci/drivers/ath5k/new_id without having to specify the driver data as well. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath5k: fix uninitialized value use in ath5k_eeprom_read_turbo_modes()Pavel Roskin1-24/+5
The `val' variable in ath5k_eeprom_read_turbo_modes() is used uninitialized. gcc 4.4.1 with -fno-inline-functions-called-once reports it: eeprom.c: In function 'ath5k_eeprom_read_turbo_modes': eeprom.c:441: warning: 'val' may be used uninitialized in this function Comparing the code to the Atheros HAL, it's clear that the split between ath5k_eeprom_read_modes() and ath5k_eeprom_read_turbo_modes() was incorrect. The Atheros HAL reads both turbo and non-turbo data from EEPROM in one function. Some turbo mode parameters are derived from the same EEPROM values as non-turbo parameters, just from different bits. Merge ath5k_eeprom_read_turbo_modes() into ath5k_eeprom_read_modes() to fix the warning. The actual values and offsets have been cross-checked against Atheros HAL. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ath5k: clarify srev comparison for CCMP checkBob Copeland2-5/+3
As Pavel Roskin noted, the check for mac version as copied from legacy_hal made no sense. This replaces it with the equivalent and makes up a suitable #define for the mac version legacy_hal checked. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-15 23:03:57 +0300