| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit f7afda7fcd169a9168695247d07ad94cf7b9798f upstream.
The commit 6a23e7b4332c ("drm/amd: Clean up kfd node on surprise
disconnect") introduced early KFD cleanup when drm_dev_is_unplugged()
returns true. However, this causes hangs during normal module unload
(rmmod amdgpu).
The issue occurs because drm_dev_unplug() is called in amdgpu_pci_remove()
for all removal scenarios, not just surprise disconnects. This was done
intentionally in commit 39934d3ed572 ("Revert "drm/amdgpu: TA unload
messages are not actually sent to psp when amdgpu is uninstalled"") to
fix IGT PCI software unplug test failures. As a result,
drm_dev_is_unplugged() returns true even during normal module unload,
triggering the early KFD cleanup inappropriately.
The correct check should distinguish between:
- Actual surprise disconnect (eGPU unplugged): pci_dev_is_disconnected()
returns true
- Normal module unload (rmmod): pci_dev_is_disconnected() returns false
Replace drm_dev_is_unplugged() with pci_dev_is_disconnected() to ensure
the early cleanup only happens during true hardware disconnect events.
Cc: stable@vger.kernel.org
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/b0c22deb-c0fa-3343-33cf-fd9a77d7db99@absolutedigital.net/
Fixes: 6a23e7b4332c ("drm/amd: Clean up kfd node on surprise disconnect")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd815e6e3918dc75a49aaabac36e4f024d675101 upstream.
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled.
Fixes: 4e8402a3f884 ("[Bluetooth] Retrieve L2CAP features mask on connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 15145675690cab2de1056e7ed68e59cbd0452529 upstream.
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ebba09f198078b7a2565004104ef762d1148e7f0 upstream.
For Zhaoxin processors, the XSHA1 instruction requires the total memory
allocated at %rdi register must be 32 bytes, while the XSHA1 and
XSHA256 instruction doesn't perform any operation when %ecx is zero.
Due to these requirements, the current padlock-sha driver does not work
correctly with Zhaoxin processors. It cannot pass the self-tests and
therefore does not activate the driver on Zhaoxin processors. This issue
has been reported in Debian [1]. The self-tests fail with the
following messages [2]:
alg: shash: sha1-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha1 using sha1-padlock-nano failed (rc=-22)
alg: shash: sha256-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha256 using sha256-padlock-nano failed (rc=-22)
Disable the padlock-sha driver on Zhaoxin processors with the CPU family
0x07 and newer. Following the suggestion in [3], support for PHE will be
added to lib/crypto/ instead.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1113996
[2] https://linux-hardware.org/?probe=271fabb7a4&log=dmesg
[3] https://lore.kernel.org/linux-crypto/aUI4CGp6kK7mxgEr@gondor.apana.org.au/
Fixes: 63dc06cd12f9 ("crypto: padlock-sha - Use API partial block handling")
Cc: stable@vger.kernel.org
Signed-off-by: AlanSong-oc <AlanSong-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20260313080150.9393-2-AlanSong-oc@zhaoxin.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 672e5229e1ecfc2a3509b53adcb914d8b024a853 upstream.
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0d4aef630be9d5f9c1227d07669c26c4383b5ad0 upstream.
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending.
Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2c98a8fbd6aa647414c6248dacf254ebe91c79ad upstream.
The assembly flush instructions were swapped for I- and D-cache flags:
SYSCALL_DEFINE3(cacheflush, ...)
{
if (cache & DCACHE) {
"fic ...\n"
}
if (cache & ICACHE && error == 0) {
"fdc ...\n"
}
Fix it by using fdc for DCACHE, and fic for ICACHE flushing.
Reported-by: Felix Lechner <felix.lechner@lease-up.com>
Fixes: c6d96328fecd ("parisc: Add cacheflush() syscall")
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64dcbde7f8f870a4f2d9daf24ffb06f9748b5dd3 upstream.
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc).
Fixes: 84fcd9449fd7 ("bnxt_en: Manage the FW trace context memory")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/SYBPR01MB7881A253A1C9775D277F30E9AF42A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8da13e6d63c1a97f7302d342c89c4a56a55c7015 upstream.
PTP clock is registered on every opening of the interface and destroyed on
every closing. However it may be accessed via get_ts_info ethtool call
which is possible while the interface is just present in the kernel.
BUG: KASAN: use-after-free in ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
Read of size 4 at addr ffff8880194345cc by task syz.0.6/948
CPU: 1 PID: 948 Comm: syz.0.6 Not tainted 6.1.164+ #109
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
print_address_description mm/kasan/report.c:316 [inline]
print_report+0x17f/0x496 mm/kasan/report.c:420
kasan_report+0xd9/0x180 mm/kasan/report.c:524
ptp_clock_index+0x47/0x50 drivers/ptp/ptp_clock.c:426
gem_get_ts_info+0x138/0x1e0 drivers/net/ethernet/cadence/macb_main.c:3349
macb_get_ts_info+0x68/0xb0 drivers/net/ethernet/cadence/macb_main.c:3371
__ethtool_get_ts_info+0x17c/0x260 net/ethtool/common.c:558
ethtool_get_ts_info net/ethtool/ioctl.c:2367 [inline]
__dev_ethtool net/ethtool/ioctl.c:3017 [inline]
dev_ethtool+0x2b05/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
</TASK>
Allocated by task 457:
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:699 [inline]
ptp_clock_register+0x144/0x10e0 drivers/ptp/ptp_clock.c:235
gem_ptp_init+0x46f/0x930 drivers/net/ethernet/cadence/macb_ptp.c:375
macb_open+0x901/0xd10 drivers/net/ethernet/cadence/macb_main.c:2920
__dev_open+0x2ce/0x500 net/core/dev.c:1501
__dev_change_flags+0x56a/0x740 net/core/dev.c:8651
dev_change_flags+0x92/0x170 net/core/dev.c:8722
do_setlink+0xaf8/0x3a80 net/core/rtnetlink.c:2833
__rtnl_newlink+0xbf4/0x1940 net/core/rtnetlink.c:3608
rtnl_newlink+0x63/0xa0 net/core/rtnetlink.c:3655
rtnetlink_rcv_msg+0x3c6/0xed0 net/core/rtnetlink.c:6150
netlink_rcv_skb+0x15d/0x430 net/netlink/af_netlink.c:2511
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x6d7/0xa30 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x97e/0xeb0 net/netlink/af_netlink.c:1872
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x14b/0x180 net/socket.c:730
__sys_sendto+0x320/0x3b0 net/socket.c:2152
__do_sys_sendto net/socket.c:2164 [inline]
__se_sys_sendto net/socket.c:2160 [inline]
__x64_sys_sendto+0xdc/0x1b0 net/socket.c:2160
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 938:
kasan_slab_free include/linux/kasan.h:177 [inline]
slab_free_hook mm/slub.c:1729 [inline]
slab_free_freelist_hook mm/slub.c:1755 [inline]
slab_free mm/slub.c:3687 [inline]
__kmem_cache_free+0xbc/0x320 mm/slub.c:3700
device_release+0xa0/0x240 drivers/base/core.c:2507
kobject_cleanup lib/kobject.c:681 [inline]
kobject_release lib/kobject.c:712 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1cd/0x350 lib/kobject.c:729
put_device+0x1b/0x30 drivers/base/core.c:3805
ptp_clock_unregister+0x171/0x270 drivers/ptp/ptp_clock.c:391
gem_ptp_remove+0x4e/0x1f0 drivers/net/ethernet/cadence/macb_ptp.c:404
macb_close+0x1c8/0x270 drivers/net/ethernet/cadence/macb_main.c:2966
__dev_close_many+0x1b9/0x310 net/core/dev.c:1585
__dev_close net/core/dev.c:1597 [inline]
__dev_change_flags+0x2bb/0x740 net/core/dev.c:8649
dev_change_flags+0x92/0x170 net/core/dev.c:8722
dev_ifsioc+0x151/0xe00 net/core/dev_ioctl.c:326
dev_ioctl+0x33e/0x1070 net/core/dev_ioctl.c:572
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Set the PTP clock pointer to NULL after unregistering.
Fixes: c2594d804d5c ("macb: Common code to enable ptp support for MACB/GEM")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-1-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55dc632ab2ac2889b15995a9eef56c753d48ebc7 upstream.
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --
Fixes: 43201767b44c ("NFC: nxp-nci: Convert to use GPIO descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3b8491961207ac967795c34375890407fd51a45 upstream.
If copy_to_kernel_nofault() failed, no need to flush icache and just
return immediately.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a47f0754bdd01f971c9715acdbdd3a07515c8f83 upstream.
If memory access such as copy_{from, to}_kernel_nofault() failed, its
users do not know what happened, so it is very useful to print the
exception code for such cases. Furthermore, it is better to print the
caller function to know where is the entry.
Here are the low level call chains:
copy_from_kernel_nofault()
copy_from_kernel_nofault_loop()
__get_kernel_nofault()
copy_to_kernel_nofault()
copy_to_kernel_nofault_loop()
__put_kernel_nofault()
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
shared THP
commit 939080834fef3ce42fdbcfef33fd29c9ffe5bbed upstream.
Commit 60fbb14396d5 ("mm/huge_memory: adjust try_to_migrate_one() and
split_huge_pmd_locked()") return false unconditionally after
split_huge_pmd_locked(). This may fail try_to_migrate() early when
TTU_SPLIT_HUGE_PMD is specified.
The reason is the above commit adjusted try_to_migrate_one() to, when a
PMD-mapped THP entry is found, and TTU_SPLIT_HUGE_PMD is specified (for
example, via unmap_folio()), return false unconditionally. This breaks
the rmap walk and fail try_to_migrate() early, if this PMD-mapped THP is
mapped in multiple processes.
The user sensible impact of this bug could be:
* On memory pressure, shrink_folio_list() may split partially mapped
folio with split_folio_to_list(). Then free unmapped pages without IO.
If failed, it may not be reclaimed.
* On memory failure, memory_failure() would call try_to_split_thp_page()
to split folio contains the bad page. If succeed, the PG_has_hwpoisoned
bit is only set in the after-split folio contains @split_at. By doing
so, we limit bad memory. If failed to split, the whole folios is not
usable.
One way to reproduce:
Create an anonymous THP range and fork 512 children, so we have a
THP shared mapped in 513 processes. Then trigger folio split with
/sys/kernel/debug/split_huge_pages debugfs to split the THP folio to
order 0.
Without the above commit, we can successfully split to order 0. With the
above commit, the folio is still a large folio.
And currently there are two core users of TTU_SPLIT_HUGE_PMD:
* try_to_unmap_one()
* try_to_migrate_one()
try_to_unmap_one() would restart the rmap walk, so only
try_to_migrate_one() is affected.
We can't simply revert commit 60fbb14396d5 ("mm/huge_memory: adjust
try_to_migrate_one() and split_huge_pmd_locked()"), since it removed some
duplicated check covered by page_vma_mapped_walk().
This patch fixes this by restart page_vma_mapped_walk() after
split_huge_pmd_locked(). Since we cannot simply return "true" to fix the
problem, as that would affect another case:
When invoking folio_try_share_anon_rmap_pmd() from
split_huge_pmd_locked(), the latter can fail and leave a large folio
mapped through PTEs, in which case we ought to return true from
try_to_migrate_one(). This might result in unnecessary walking of the
rmap but is relatively harmless.
Link: https://lkml.kernel.org/r/20260305015006.27343-1-richard.weiyang@gmail.com
Fixes: 60fbb14396d5 ("mm/huge_memory: adjust try_to_migrate_one() and split_huge_pmd_locked()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fae654083bfa409bb2244f390232e2be47f05bfc upstream.
move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge
zero pages. For the huge zero page path, src_folio is explicitly set to
NULL, and is used as a sentinel to skip folio operations like lock and
rmap.
In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL,
pgprot) passes NULL through folio_pfn() and page_to_pfn(). With
SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD
pointing to non-existent physical memory. On other memory models it is a
NULL dereference.
Use page_folio(src_page) to obtain the valid huge zero folio from the
page, which was obtained from pmd_page() and remains valid throughout.
After commit d82d09e48219 ("mm/huge_memory: mark PMD mappings of the huge
zero folio special"), moved huge zero PMDs must remain special so
vm_normal_page_pmd() continues to treat them as special mappings.
move_pages_huge_pmd() currently reconstructs the destination PMD in the
huge zero page branch, which drops PMD state such as pmd_special() on
architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result,
vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page
and corrupt its refcount.
Instead of reconstructing the PMD from the folio, derive the destination
entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD
metadata the same way move_huge_pmd() does for moved entries by marking it
soft-dirty and clearing uffd-wp.
Link: https://lkml.kernel.org/r/a1e787dd-b911-474d-8570-f37685357d86@lucifer.local
Fixes: e3981db444a0 ("mm: add folio_mk_pmd()")
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 29f40594a28114b9a9bc87f6cf7bbee9609628f2 upstream.
We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the
batch has a mix of writable and non-writable bits, we may end up setting
the entire batch writable. Fix this by respecting writable bit during
batching.
Although on a successful unmap of a lazyfree folio, the soft-dirty bit is
lost, preserve it on pte restoration by respecting the bit during
batching, to make the fix consistent w.r.t both writable bit and
soft-dirty bit.
I was able to write the below reproducer and crash the kernel.
Explanation of reproducer (set 64K mTHP to always):
Fault in a 64K large folio. Split the VMA at mid-point with
MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes
and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that
folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do
MADV_FREE on the range to mark the folio as lazyfree. Write to the memory
to dirty the pte, eventually rmap will dirty the folio. Then trigger
reclaim, we will hit the pte restoration path, and the kernel will crash
with the trace given below.
The BUG happens at:
BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw);
The code path is asking for anonymous page to be mapped writable into the
pagetable. The BUG_ON() firing implies that such a writable page has been
mapped into the pagetables of more than one process, which breaks
anonymous memory/CoW semantics.
[ 21.134473] kernel BUG at mm/page_table_check.c:118!
[ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 21.135917] Modules linked in:
[ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT
[ 21.136858] Hardware name: linux,dummy-virt (DT)
[ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 21.137308] pc : page_table_check_set+0x28c/0x2a8
[ 21.137607] lr : page_table_check_set+0x134/0x2a8
[ 21.137885] sp : ffff80008a3b3340
[ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000
[ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001
[ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30
[ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000
[ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff
[ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020
[ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0
[ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff
[ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002
[ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0
[ 21.141991] Call trace:
[ 21.142093] page_table_check_set+0x28c/0x2a8 (P)
[ 21.142265] __page_table_check_ptes_set+0x144/0x1e8
[ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8
[ 21.142766] contpte_set_ptes+0xe8/0x140
[ 21.142907] try_to_unmap_one+0x10c4/0x10d0
[ 21.143177] rmap_walk_anon+0x100/0x250
[ 21.143315] try_to_unmap+0xa0/0xc8
[ 21.143441] shrink_folio_list+0x59c/0x18a8
[ 21.143759] shrink_lruvec+0x664/0xbf0
[ 21.144043] shrink_node+0x218/0x878
[ 21.144285] __node_reclaim.constprop.0+0x98/0x338
[ 21.144763] user_proactive_reclaim+0x2a4/0x340
[ 21.145056] reclaim_store+0x3c/0x60
[ 21.145216] dev_attr_store+0x20/0x40
[ 21.145585] sysfs_kf_write+0x84/0xa8
[ 21.145835] kernfs_fop_write_iter+0x130/0x1c8
[ 21.145994] vfs_write+0x2b8/0x368
[ 21.146119] ksys_write+0x70/0x110
[ 21.146240] __arm64_sys_write+0x24/0x38
[ 21.146380] invoke_syscall+0x50/0x120
[ 21.146513] el0_svc_common.constprop.0+0x48/0xf8
[ 21.146679] do_el0_svc+0x28/0x40
[ 21.146798] el0_svc+0x34/0x110
[ 21.146926] el0t_64_sync_handler+0xa0/0xe8
[ 21.147074] el0t_64_sync+0x198/0x1a0
[ 21.147225] Code: f9400441 b4fff241 17ffff94 d4210000 (d4210000)
[ 21.147440] ---[ end trace 0000000000000000 ]---
#define _GNU_SOURCE
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <string.h>
#include <sys/wait.h>
#include <sched.h>
#include <fcntl.h>
void write_to_reclaim() {
const char *path = "/sys/devices/system/node/node0/reclaim";
const char *value = "409600000000";
int fd = open(path, O_WRONLY);
if (fd == -1) {
perror("open");
exit(EXIT_FAILURE);
}
if (write(fd, value, sizeof("409600000000") - 1) == -1) {
perror("write");
close(fd);
exit(EXIT_FAILURE);
}
printf("Successfully wrote %s to %s\n", value, path);
close(fd);
}
int main()
{
char *ptr = mmap((void *)(1UL << 30), 1UL << 16, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if ((unsigned long)ptr != (1UL << 30)) {
perror("mmap");
return 1;
}
/* a 64K folio gets faulted in */
memset(ptr, 0, 1UL << 16);
/* 32K half will not be shared into child */
if (madvise(ptr, 1UL << 15, MADV_DONTFORK)) {
perror("madvise madv dontfork");
return 1;
}
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
} else if (pid == 0) {
sleep(15);
} else {
/* merge VMAs. now first half of the 16 ptes are writable, the other half not. */
if (madvise(ptr, 1UL << 15, MADV_DOFORK)) {
perror("madvise madv fork");
return 1;
}
if (madvise(ptr, (1UL << 16), MADV_FREE)) {
perror("madvise madv free");
return 1;
}
/* dirty the large folio */
(*ptr) += 10;
write_to_reclaim();
// sleep(10);
waitpid(pid, NULL, 0);
}
}
Link: https://lkml.kernel.org/r/20260303061528.2429162-1-dev.jain@arm.com
Fixes: 354dffd29575 ("mm: support batched unmap for lazyfree large folios during reclamation")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 36f46b0e36892eba08978eef7502ff3c94ddba77 upstream.
When debug logging is enabled, read_key_from_user_keying() logs the first
8 bytes of the key payload and partially exposes the dm-crypt key. Stop
logging any key bytes.
Link: https://lkml.kernel.org/r/20260227230008.858641-2-thorsten.blum@linux.dev
Fixes: 479e58549b0f ("crash_dump: store dm crypt keys in kdump reserved memory")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8aec14230322ed8f1e8042b6d656c1631d41163 upstream.
Dingisoul with KASAN reports a use after free if device_add() fails in
nd_async_device_register().
Commit b6eae0f61db2 ("libnvdimm: Hold reference on parent while
scheduling async init") correctly added a reference on the parent device
to be held until asynchronous initialization was complete. However, if
device_add() results in an allocation failure the ref count of the
device drops to 0 prior to the parent pointer being accessed. Thus
resulting in use after free.
The bug bot AI correctly identified the fix. Save a reference to the
parent pointer to be used to drop the parent reference regardless of the
outcome of device_add().
Reported-by: Dingisoul <dingiso.kernel@gmail.com>
Closes: http://lore.kernel.org/8855544b-be9e-4153-aa55-0bc328b13733@gmail.com
Fixes: b6eae0f61db2 ("libnvdimm: Hold reference on parent while scheduling async init")
Cc: stable@vger.kernel.org
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306-fix-uaf-async-init-v1-1-a28fd7526723@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17ad31b3a43b72aec3a3d83605891e1397d0d065 upstream.
When a reader's file descriptor is closed while in the middle of reading
a cache_request (rp->offset != 0), cache_release() decrements the
request's readers count but never checks whether it should free the
request.
In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the
cache_request is removed from the queue and freed along with its buffer
and cache_head reference. cache_release() lacks this cleanup.
The only other path that frees requests with readers == 0 is
cache_dequeue(), but it runs only when CACHE_PENDING transitions from
set to clear. If that transition already happened while readers was
still non-zero, cache_dequeue() will have skipped the request, and no
subsequent call will clean it up.
Add the same cleanup logic from cache_read() to cache_release(): after
decrementing readers, check if it reached 0 with CACHE_PENDING clear,
and if so, dequeue and free the cache_request.
Reported-by: NeilBrown <neilb@ownmail.net>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2b658c1c442ec1cd9eec5ead98d68662c40fe645 upstream.
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense.
Fixes: 8bd0488b5ea5 ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5d4c6c132ea9a967d48890dd03e6a786c060e968 upstream.
This can happen in situations when CONFIG_HID_SUPPORT is set to no, or
some complex situations where struct bpf_wq is not exported.
So do the usual dance of hiding them before including vmlinux.h, and
then redefining them and make use of CO-RE to have the correct offsets.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603111558.KLCIxsZB-lkp@intel.com/
Fixes: fe8d561db3e8 ("selftests/hid: add wq test for hid_bpf_input_report()")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5133b61aaf437e5f25b1b396b14242a6bb0508e2 upstream.
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Nicholas Carlini <npc@anthropic.com>
Tested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7fcf179b82d3a3730fd8615da01b087cc654d0b upstream.
The /proc/fs/nfs/exports proc entry is created at module init
and persists for the module's lifetime. exports_proc_open()
captures the caller's current network namespace and stores
its svc_export_cache in seq->private, but takes no reference
on the namespace. If the namespace is subsequently torn down
(e.g. container destruction after the opener does setns() to a
different namespace), nfsd_net_exit() calls nfsd_export_shutdown()
which frees the cache. Subsequent reads on the still-open fd
dereference the freed cache_detail, walking a freed hash table.
Hold a reference on the struct net for the lifetime of the open
file descriptor. This prevents nfsd_net_exit() from running --
and thus prevents nfsd_export_shutdown() from freeing the cache
-- while any exports fd is open. cache_detail already stores
its net pointer (cd->net, set by cache_create_net()), so
exports_release() can retrieve it without additional per-file
storage.
Reported-by: Misbah Anjum N <misanjum@linux.ibm.com>
Closes: https://lore.kernel.org/linux-nfs/dcd371d3a95815a84ba7de52cef447b8@linux.ibm.com/
Fixes: 96d851c4d28d ("nfsd: use proper net while reading "exports" file")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 48db892356d6cb80f6942885545de4a6dd8d2a29 upstream.
svc_export_put() calls path_put() and auth_domain_put() immediately
when the last reference drops, before the RCU grace period. RCU
readers in e_show() and c_show() access both ex_path (via
seq_path/d_path) and ex_client->name (via seq_escape) without
holding a reference. If cache_clean removes the entry and drops the
last reference concurrently, the sub-objects are freed while still
in use, producing a NULL pointer dereference in d_path.
Commit 2530766492ec ("nfsd: fix UAF when access ex_uuid or
ex_stats") moved kfree of ex_uuid and ex_stats into the
call_rcu callback, but left path_put() and auth_domain_put() running
before the grace period because both may sleep and call_rcu
callbacks execute in softirq context.
Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the
callback until after the RCU grace period and executes it in process
context where sleeping is permitted. This allows path_put() and
auth_domain_put() to be moved into the deferred callback alongside
the other resource releases. Apply the same fix to expkey_put(),
which has the identical pattern with ek_path and ek_client.
A dedicated workqueue scopes the shutdown drain to only NFSD
export release work items; flushing the shared
system_unbound_wq would stall on unrelated work from other
subsystems. nfsd_export_shutdown() uses rcu_barrier() followed
by flush_workqueue() to ensure all deferred release callbacks
complete before the export caches are destroyed.
Reported-by: Misbah Anjum N <misanjum@linux.ibm.com>
Closes: https://lore.kernel.org/linux-nfs/dcd371d3a95815a84ba7de52cef447b8@linux.ibm.com/
Fixes: c224edca7af0 ("nfsd: no need get cache ref when protected by rcu")
Fixes: 1b10f0b603c0 ("SUNRPC: no need get cache ref when protected by rcu")
Cc: stable@vger.kernel.org
Reviwed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20260317163006.959177102@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Link: https://lore.kernel.org/r/20260318122547.233850204@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2fcfe5951eb2e8440fc5e1dd6ea977336ff83a1d upstream.
scx_enable() uses double-checked locking to lazily initialize a static
kthread_worker pointer. The fast path reads helper locklessly:
if (!READ_ONCE(helper)) { // lockless read -- no helper_mutex
The write side initializes helper under helper_mutex, but previously
used a plain assignment:
helper = kthread_run_worker(0, "scx_enable_helper");
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
plain write -- KCSAN data race with READ_ONCE() above
Since READ_ONCE() on the fast path and the plain write on the
initialization path access the same variable without a common lock,
they constitute a data race. KCSAN requires that all sides of a
lock-free access use READ_ONCE()/WRITE_ONCE() consistently.
Use a temporary variable to stage the result of kthread_run_worker(),
and only WRITE_ONCE() into helper after confirming the pointer is
valid. This avoids a window where a concurrent caller on the fast path
could observe an ERR pointer via READ_ONCE(helper) before the error
check completes.
Fixes: b06ccbabe250 ("sched_ext: Fix starvation of scx_enable() under fair-class saturation")
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fe44c4388146bdbb3c5932d81a26d9fa0fd3ec9 upstream.
kthread_exit became a macro to do_exit in commit 28aaa9c39945
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93d0fcdddc9e7be9d4f42acbe57bc90dbb0fe75d upstream.
Commit e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to
cxl_pmem.ko") moves devm_cxl_add_nvdimm_bridge() into the cxl_pmem file,
which has independent config compile options for built-in or module. The
call from cxl_acpi_probe() is guarded by IS_ENABLED(CONFIG_CXL_PMEM),
which evaluates to true for both =y and =m.
When CONFIG_CXL_PMEM=m, a built-in cxl_acpi attempts to reference a
symbol exported by a module, which fails to link. CXL_PMEM cannot simply
be promoted to =y in this configuration because it depends on LIBNVDIMM,
which may itself be =m.
Add a Kconfig dependency to prevent CXL_ACPI from being built-in when
CXL_PMEM is a module. This contrains CXL_ACPI to =m when CXL_PMEM=m,
while still allowing CXL_ACPI to be freely configured when CXL_PMEM is
either built-in or disabled.
[ dj: Fix up commit reference formatting. ]
Fixes: e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260305204057.1516948-1-kbusch@meta.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 177c69432161f6e4bab07ccacf8a1748a6898a6b upstream.
Similarly to what commit e78f7b70e837 did for local task work additions,
use ->rings_rcu under RCU rather than dereference ->rings directly. See
that commit for more details.
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 96189080265e6bb5dde3a4afbaf947af493e3f82 upstream.
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper.
Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ac6769c8f948dff33265c50e524aebf9aa6f1be0 ]
If vgic_allocate_private_irqs_locked() fails for any odd reason,
we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised.
kvm_vgic_dist_destroy() then comes along and walks into the weeds
trying to free the RDs. Got to love this stuff.
Solve it by moving all the static initialisation early, and make
sure that if we fail halfway, we're in a reasonable shape to
perform the rest of the teardown. While at it, reset the vgic model
on failure, just in case...
Reported-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com
Tested-by: syzbot+f6a46b038fc243ac0175@syzkaller.appspotmail.com
Fixes: b3aa9283c0c50 ("KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()")
Link: https://lore.kernel.org/r/69a2d58c.050a0220.3a55be.003b.GAE@google.com
Link: https://patch.msgid.link/20260228164559.936268-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9435c1e1431003e23aa34ef8e46c30d09c3dbcb5 ]
Different GIC types require the private IRQs to be initialised
differently. GICv5 is the culprit as it supports both a different
number of private IRQs, and all of these are PPIs (there are no
SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to
encode the type, the intid also needs to computed differently.
Up until now, the GIC model has been set after initialising the
private IRQs for a VCPU. Move this earlier to ensure that the GIC
model is available when configuring the private IRQs. While we're at
it, also move the setting of the in_kernel flag and implementation
revision to keep them grouped together as before.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Stable-dep-of: ac6769c8f948 ("KVM: arm64: Eagerly init vgic dist/redist on vgic creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c80f46ac228b48403866d65391ad09bdf0e8562a ]
DAMON core uses min_region_sz parameter value as the DAMON region
alignment. The alignment is made using ALIGN() and ALIGN_DOWN(), which
support only the power of two alignments. But DAMON core API callers can
set min_region_sz to an arbitrary number. Users can also set it
indirectly, using addr_unit.
When the alignment is not properly set, DAMON behavior becomes difficult
to expect and understand, makes it effectively broken. It doesn't cause a
kernel crash-like significant issue, though.
Fix the issue by disallowing min_region_sz input that is not a power of
two. Add the check to damon_commit_ctx(), as all DAMON API callers who
set min_region_sz uses the function.
This can be a sort of behavioral change, but it does not break users, for
the following reasons. As the symptom is making DAMON effectively broken,
it is not reasonable to believe there are real use cases of non-power of
two min_region_sz. There is no known use case or issue reports from the
setup, either.
In future, if we find real use cases of non-power of two alignments and we
can support it with low enough overhead, we can consider moving the
restriction. But, for now, simply disallowing the corner case should be
good enough as a hot fix.
Link: https://lkml.kernel.org/r/20260214214124.87689-1-sj@kernel.org
Fixes: d8f867fa0825 ("mm/damon: add damon_ctx->min_sz_region")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Quanmin Yan <yanquanmin1@huawei.com>
Cc: <stable@vger.kernel.org> [6.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc1db8dff8e751ec3ab352483de366b7f23aefe2 ]
'min_sz_region' field of 'struct damon_ctx' represents the minimum size of
each DAMON region for the context. 'struct damos_access_pattern' has a
field of the same name. It confuses readers and makes 'grep' less optimal
for them. Rename it to 'min_region_sz'.
Link: https://lkml.kernel.org/r/20260117175256.82826-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: c80f46ac228b ("mm/damon/core: disallow non-power of two min_region_sz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dfb1b0c9dc0d61e422905640e1e7334b3cf6f384 ]
The macro is for the default minimum size of each DAMON region. There was
a case that a reader was confused if it is the minimum number of total
DAMON regions, which is set on damon_attrs->min_nr_regions. Make the name
more explicit.
Link: https://lkml.kernel.org/r/20260117175256.82826-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: c80f46ac228b ("mm/damon/core: disallow non-power of two min_region_sz")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b795e68bf3073d67bebbb5a44d93f49efc5b8cc7 upstream.
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1dca8aee80eea76d2aae21265de5dd64f6ba0f09 upstream.
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec3cfd835f7c4bbd23bc9ad909d2fdc772a578bb upstream.
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b6d586431ae20d5157ee468d0ef62ad26798ef13 upstream.
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fa12bb903bc3ed1826e355d267fe134bde95e23c upstream.
The MIPI I3C HCI driver currently uses separate spinlocks for different
contexts (PIO vs. DMA rings). This split is unnecessary and complicates
upcoming fixes. The driver does not support concurrent PIO and DMA
operation, and it only supports a single DMA ring, so a single lock is
sufficient for all paths.
Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA
code to use it, and remove the per-context locks.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3bcbfe1b8b0b836b772927f75f8cb6e759eb00a upstream.
Prepare for fixing a race in the DMA ring enqueue path when handling
parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer()
and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage
around the enqueue operation without performing DMA mapping under the
spinlock.
No functional change is intended in this patch.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4167b8914463132654e01e16259847d097f8a7f7 upstream.
The MIPI I3C HCI driver currently returns -ETIME for various timeout
conditions, while other I3C master drivers consistently use -ETIMEDOUT
for the same class of errors. Align the HCI driver with the rest of the
subsystem by replacing all uses of -ETIME with -ETIMEDOUT.
Fixes: 9ad9a52cce282 ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a318cfc0853706f1d6ce682dba660bc455d674ef upstream.
Avoid division by zero when sampling frequency is unspecified.
Fixes: 60df548277b7 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 585b90c0161ab77416fe3acdbdc55b978e33e16c upstream.
Initialize fw_size before copying firmware data into the flexible
array member to match the __counted_by() annotation. This fixes the
incorrect assignment order that triggers runtime safety checks.
Fixes: e9ed97be4fcc ("iio: proximity: hx9023s: Added firmware file parsing functionality")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ffd32db8263d2d785a2c419486a450dc80693235 upstream.
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9f3a593137d862d424130343e77d4b5260a4f5a upstream.
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd37c ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ef74d961d1ad6ec72b50887ca119d7f98f07717 upstream.
Drive bit must be set for open-drain mode and be cleared for push-pull
mode.
Referring to datasheet DS-000576_ICM-45605.pdf section 17.23
INT1_CONFIG2.
Fixes: 06674a72cf7a ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd72e6c3cdea05cad24e99710939086f7a113fb5 upstream.
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f18306 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2617595538be8a2f270ad13fccb9f56007b292d7 upstream.
When the driver probe fails we encounter a regulator put warning
because vddio regulator is not stopped before release. The issue
comes from pm_runtime not already setup when core probe fails and
the vddio regulator disable callback is called.
Fix the issue by setting pm_runtime active early before vddio
regulator resource cleanup. This requires to cut pm_runtime
set_active and enable in 2 function calls.
Fixes: 7ff021a3faca ("iio: imu: inv_icm45600: add new inv_icm45600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 91f950b4cbb1aa9ea4eb3999f1463e8044b717fb upstream.
The return value of pm_runtime_get_sync() is not checked, and the
function always returns success. This allows I2C mux operations to
proceed even when the device fails to resume.
Use pm_runtime_resume_and_get() and propagate its return value to
properly handle resume failures.
Fixes: 3904b28efb2c ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9990cd4f8827bd1ae3fb6eb7407630d8d463c430 upstream.
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case.
Fixes: 3b29bcee8f6f ("iio: imu: adis: Add custom ops struct")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
