| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260204143851.857060534@linuxfoundation.org
Tested-by: Achill Gilgenast <achill@achill.org>=
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Brett Mastbergen <bmastbergen@ciq.com>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Tested-by: Dileep Malepu <dileep.debian@gmail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 280d654324e33f8e6e3641f76764694c7b64c5db ]
In case of subflow disconnect(), which can also happen with the first
subflow in case of errors like timeout or reset, mptcp_subflow_ctx_reset
will reset most fields from the mptcp_subflow_context structure,
including close_event_done. Then, when another subflow is closed, yet
another SUB_CLOSED event for the disconnected initial subflow is sent.
Because of the previous reset, there are no source address and
destination port.
A solution is then to also check the subflow's local id: it shouldn't be
negative anyway.
Another solution would be not to reset subflow->close_event_done at
disconnect time, but when reused. But then, probably the whole reset
could be done when being reused. Let's not change this logic, similar
to TCP with tcp_disconnect().
Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reported-by: Marco Angaroni <marco.angaroni@italtel.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/603
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-1-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a379fa1e2cae15d7422b4eead83a6366f2f445cb upstream.
SCX_KICK_WAIT is used to synchronously wait for the target CPU to complete
a reschedule and can be used to implement operations like core scheduling.
This used to be implemented by scx_next_task_picked() incrementing pnt_seq,
which was always called when a CPU picks the next task to run, allowing
SCX_KICK_WAIT to reliably wait for the target CPU to enter the scheduler and
pick the next task.
However, commit b999e365c298 ("sched_ext: Replace scx_next_task_picked()
with switch_class()") replaced scx_next_task_picked() with the
switch_class() callback, which is only called when switching between sched
classes. This broke SCX_KICK_WAIT because pnt_seq would no longer be
reliably incremented unless the previous task was SCX and the next task was
not.
This fix leverages commit 4c95380701f5 ("sched/ext: Fold balance_scx() into
pick_task_scx()") which refactored the pick path making put_prev_task_scx()
the natural place to track task switches for SCX_KICK_WAIT. The fix moves
pnt_seq increment to put_prev_task_scx() and also increments it in
pick_task_scx() to handle cases where the same task is re-selected, whether
by BPF scheduler decision or slice refill. The semantics: If the current
task on the target CPU is SCX, SCX_KICK_WAIT waits until the CPU enters the
scheduling path. This provides sufficient guarantee for use cases like core
scheduling while keeping the operation self-contained within SCX.
v2: - Also increment pnt_seq in pick_task_scx() to handle same-task
re-selection (Andrea Righi).
- Use smp_cond_load_acquire() for the busy-wait loop for better
architecture optimization (Peter Zijlstra).
Reported-by: Wen-Fang Liu <liuwenfang@honor.com>
Link: http://lkml.kernel.org/r/228ebd9e6ed3437996dffe15735a9caa@honor.com
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a9c1fbbd6dadbaa38c157a07d5d11005460b86b9 upstream.
When a sched_ext scheduler tries to kick a CPU, the CPU may be running a
higher class task. sched_ext has no control over such CPUs. A sched_ext
scheduler couldn't have expected to get access to the CPU after kicking it
anyway. Skip kicking when the target CPU is running a higher class.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 205305c028ad986d0649b8b100bab6032dcd1bb5 upstream.
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112072709.73755-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c65db809796717f0a96cf22f80405dbc1a31a4b upstream.
This reverts commit 604826acb3f53c6648a7ee99a3914ead680ab7fb.
Apparently there is more to supporting atomic modesetting than
providing atomic_(check|commit) callbacks. Before this revert:
WARNING: [] drivers/gpu/drm/drm_plane.c:389 at .__drm_universal_plane_init+0x13c/0x794 [drm], CPU#1: modprobe/1790
BUG: Kernel NULL pointer dereference on read at 0x00000000
.drm_atomic_get_plane_state+0xd4/0x210 [drm] (unreliable)
.drm_client_modeset_commit_atomic+0xf8/0x338 [drm]
.drm_client_modeset_commit_locked+0x80/0x260 [drm]
.drm_client_modeset_commit+0x40/0x7c [drm]
.__drm_fb_helper_restore_fbdev_mode_unlocked.part.0+0xfc/0x108 [drm_kms_helper]
.drm_fb_helper_set_par+0x8c/0xb8 [drm_kms_helper]
.fbcon_init+0x31c/0x618
[...]
.__drm_fb_helper_initial_config_and_unlock+0x474/0x7f4 [drm_kms_helper]
.drm_fbdev_client_hotplug+0xb0/0x120 [drm_client_lib]
.drm_client_register+0x88/0xe4 [drm]
.drm_fbdev_client_setup+0x12c/0x19b4 [drm_client_lib]
.drm_client_setup+0x15c/0x18c [drm_client_lib]
.nouveau_drm_probe+0x19c/0x268 [nouveau]
Fixes: 604826acb3f5 ("drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)")
Reported-by: John Ogness <john.ogness@linutronix.de>
Closes: https://lore.kernel.org/lkml/87ldhf1prw.fsf@jogness.linutronix.de
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Tested-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260130113230.2311221-1-john.ogness@linutronix.de
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d70f79fef65810faf64dbae1f3a1b5623cdb2345 upstream.
glibc ≥ 2.42 (GCC 15) defaults to -std=gnu23, which promotes
-Wdiscarded-qualifiers to an error.
In C23, strstr() and strchr() return "const char *".
Change variable types to const char * where the pointers are never
modified (res, sym_sfx, next_path).
Suggested-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/20251206092825.1471385-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[ shung-hsi.yu: needed to fix kernel build failure due to libbpf since glibc
2.43+ (which adds 'const' qualifier to strstr) ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e64d1cb21a1c6ecd51bc1c94c83f6fc656f7c94d upstream.
GPIO Address Space handler gets a pointer to the in or out value.
This value is supposed to be at least 64-bit, but it's not limited
to be exactly 64-bit. When ACPI tables are being parsed, for
the bigger Connection():s ACPICA creates a Buffer instead of regular
Integer object. The Buffer exists as long as Namespace holds
the certain Connection(). Hence we can access the necessary bits
without worrying. On the other hand, the left shift, used in
the code, is limited by 31 (on 32-bit platforms) and otherwise
considered to be Undefined Behaviour. Also the code uses only
the first 64-bit word for the value, and anything bigger than 63
will be also subject to UB. Fix all this by modifying the code
to correctly set or clear the respective bit in the bitmap constructed
of 64-bit words.
Fixes: 59084c564c41 ("gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler")
Fixes: 2c4d00cb8fc5 ("gpiolib: acpi: Use BIT() macro to increase readability")
Cc: stable@vger.kernel.org
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095918.4157491-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 80f1a2c2332fee0edccd006fe87fc8a6db94bab3 upstream.
The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.
However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().
Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.
Then, this may result in dirty VCMDQ registers, which can fail the VM.
Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.
Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reported-by: Bao Nguyen <ncqb@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1defcdc4457649db236415ee618a7151e28788c upstream.
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54c6 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba205ac3d6e83f56c4f824f23f1b4522cb844ff3)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8b1ecc9377bc641533cd9e76dfa3aee3cd04a007 upstream.
On APUs such as Raven and Renoir (GC 9.1.0, 9.2.2, 9.3.0), the ih1 and
ih2 interrupt ring buffers are not initialized. This is by design, as
these secondary IH rings are only available on discrete GPUs. See
vega10_ih_sw_init() which explicitly skips ih1/ih2 initialization when
AMD_IS_APU is set.
However, amdgpu_gmc_filter_faults_remove() unconditionally uses ih1 to
get the timestamp of the last interrupt entry. When retry faults are
enabled on APUs (noretry=0), this function is called from the SVM page
fault recovery path, resulting in a NULL pointer dereference when
amdgpu_ih_decode_iv_ts_helper() attempts to access ih->ring[].
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000004
RIP: 0010:amdgpu_ih_decode_iv_ts_helper+0x22/0x40 [amdgpu]
Call Trace:
amdgpu_gmc_filter_faults_remove+0x60/0x130 [amdgpu]
svm_range_restore_pages+0xae5/0x11c0 [amdgpu]
amdgpu_vm_handle_fault+0xc8/0x340 [amdgpu]
gmc_v9_0_process_interrupt+0x191/0x220 [amdgpu]
amdgpu_irq_dispatch+0xed/0x2c0 [amdgpu]
amdgpu_ih_process+0x84/0x100 [amdgpu]
This issue was exposed by commit 1446226d32a4 ("drm/amdgpu: Remove GC HW
IP 9.3.0 from noretry=1") which changed the default for Renoir APU from
noretry=1 to noretry=0, enabling retry fault handling and thus
exercising the buggy code path.
Fix this by adding a check for ih1.ring_size before attempting to use
it. Also restore the soft_ih support from commit dd299441654f ("drm/amdgpu:
Rework retry fault removal"). This is needed if the hardware doesn't
support secondary HW IH rings.
v2: additional updates (Alex)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3814
Fixes: dd299441654f ("drm/amdgpu: Rework retry fault removal")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Jon Doron <jond@wiz.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ce8d536c80aa1f059e82184f0d1994436b1d526)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dfd64f6e8cd7b59238cdaf8af7a55711f13a89db upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0a6d6ed694d72b66b0ed7a483d5effa01acd3951)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9077d32a4b570fa20500aa26e149981c366c965d upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a2918f958d3f677ea93c0ac257cb6ba69b7abb7c)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3eb46fbb601f9a0b4df8eba79252a0a85e983044 upstream.
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd86658 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b340ff216fdabfe71ba0cdd47e9835a141d08e10)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1f810471c6a6bd349f7f9f2f2fed96082056d46 upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1f16866bdb1daed7a80ca79ae2837a9832a74fbc)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc4f433b14e05eaa4a98fd677b836e9229422387 upstream.
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e80b1d1aa1073230b6c25a1a72e88f37e425ccda)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e7fbff9e7622a00c2b53cb14df481916f0019742 upstream.
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 637fee3954d4bd509ea9d95ad1780fc174489860)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 239d0ccf567c3b09aed58eb88cd3376af37aaf14 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 53868dd8774344051999c880115740da92f97feb)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c764b7af15289051718b4859a67f9a3bc69d3fb2 upstream.
v1:
resolve the issue where some freq frequencies cannot be set correctly
due to insufficient floating-point precision.
v2:
patch this convert on 'max' value only.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6194f60c707e3878e120adeb36997075664d8429)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e535c23513c63f02f67e3e09e0787907029efeaf upstream.
Make sure to drop the reference taken to the DDC device during probe on
probe failure (e.g. probe deferral) and on driver unbind.
Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)")
Cc: stable@vger.kernel.org # 3.10
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dedb897f11c5d7e32c0e0a0eff7cec23a8047167 upstream.
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe66
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb245b ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e484 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe66 ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280eea2c965453ed8c3c69d6f121e950b)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0581f6ab952ffd135ca4402d2ee3da641538d6b upstream.
Tyr needs `CONFIG_COMMON_CLK` to build:
error[E0432]: unresolved import `kernel::clk::Clk`
--> drivers/gpu/drm/tyr/driver.rs:3:5
|
3 | use kernel::clk::Clk;
| ^^^^^^^^^^^^^^^^ no `Clk` in `clk`
error[E0432]: unresolved import `kernel::clk::OptionalClk`
--> drivers/gpu/drm/tyr/driver.rs:4:5
|
4 | use kernel::clk::OptionalClk;
| ^^^^^^^^^^^^^^^^^^^^^^^^ no `OptionalClk` in `clk`
Thus add the dependency to fix it.
Fixes: cf4fd52e3236 ("rust: drm: Introduce the Tyr driver for Arm Mali GPUs")
Cc: stable@vger.kernel.org
Acked-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260124160948.67508-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 051be49133971076717846e2a04c746ab3476282 upstream.
It looks I mistyped CS_DEBUG_MODE2 as CS_DEBUG_MODE1 when adding the
workaround. Fix it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: ca33cd271ef9 ("drm/xe/xelp: Add Wa_18022495364")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260116095040.49335-1-tvrtko.ursulin@igalia.com
(cherry picked from commit 7fe6cae2f7fad2b5166b0fc096618629f9e2ebcb)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_gem_change_handle_ioctl()
commit 12f15d52d38ac53f7c70ea3d4b3d76afed04e064 upstream.
Since GEM bo handles are u32 in the uapi and the internal implementation
uses idr_alloc() which uses int ranges, passing a new handle larger than
INT_MAX trivially triggers a kernel warning:
idr_alloc():
...
if (WARN_ON_ONCE(start < 0))
return -EINVAL;
...
Fix it by rejecting new handles above INT_MAX and at the same time make
the end limit calculation more obvious by moving into int domain.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: Zhi Wang <wangzhi@stu.xidian.edu.cn>
Fixes: 53096728b891 ("drm: Add DRM prime interface to reassign GEM handle")
Cc: David Francis <David.Francis@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v6.18+
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260123141540.76540-1-tvrtko.ursulin@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5157c328edb35bac05ce77da473c3209d20e0bbb upstream.
Add a dependency edge from `compiler_builtins` to `core` to
`scripts/generate_rust_analyzer.py` to match `rust/Makefile`. This has
been incorrect since commit 8c4555ccc55c ("scripts: add
`generate_rust_analyzer.py`")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: 8c4555ccc55c ("scripts: add `generate_rust_analyzer.py`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-1-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e440bc5c190cd0e5f148b2892aeb1f4bbbf54507 upstream.
Currently, rust-analyzer fails to properly resolve structs annotated with
`#[pin_data]`. This prevents IDE features like "Go to Definition" from
working correctly for those structs.
Add the missing configuration to `generate_rust_analyzer.py` to ensure
the `pin-init` crate macros are handled correctly.
Signed-off-by: SeungJong Ha <engineer.jjhama@gmail.com>
Fixes: d7659acca7a3 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Tested-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Link: https://patch.msgid.link/20260123-fix-pin-init-crate-dependecies-v2-1-bb1c2500e54c@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ac3c50b9a24e9ebeb585679078d6c47922034bb6 upstream.
Use `core_edition` for all sysroot crates rather than just core as all
were updated to edition 2024 in Rust 1.87.
Fixes: f4daa80d6be7 ("rust: compile libcore with edition 2024 for 1.87+")
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-rust-analyzer-sysroot-v2-1-094aedc33208@kernel.org
[ Added `>`s to make the quote a single block. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b83ef9f7ad4635c913b80ef5e718f95f48e85af upstream.
With nixpkgs's rustc, rust-src component is not bundled
with the compiler by default and is instead provided from
a separate store path, so this assumption does not hold.
The assertion assumes these paths are in the same location
which causes `make LLVM=1 rust-analyzer` to fail on NixOS.
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/x/topic/x/near/565284250
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Fixes: fe992163575b ("rust: Support latest version of `rust-analyzer`")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251224135343.32476-1-work@onurozkan.dev
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74e15ac34b098934895fd27655d098971d2b43d9 upstream.
Commit d7659acca7a3 ("rust: add pin-init crate build infrastructure")
did not add dependencies to `pin_init_internal`, resulting in broken
navigation. Thus add them now.
[ Tamir elaborates:
"before this series, go-to-symbol from pin_init_internal to e.g.
proc_macro::TokenStream doesn't work."
- Miguel ]
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: d7659acca7a3 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-3-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 98dcca855343512a99432224447f07c5988753ad upstream.
Add a dependency edge from `pin_init` to `compiler_builtins` to
`scripts/generate_rust_analyzer.py` to match `rust/Makefile`. This has
been incorrect since commit d7659acca7a3 ("rust: add pin-init crate
build infrastructure").
Signed-off-by: Tamir Duberstein <tamird@kernel.org>
Reviewed-by: Jesung Yang <y.j3ms.n@gmail.com>
Acked-by: Benno Lossin <lossin@kernel.org>
Fixes: d7659acca7a3 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250723-rust-analyzer-pin-init-v1-2-3c6956173c78@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d6ff6e870077ae0f01a6f860ca1e4a5a825dc032 upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: bb38f35b35f9 ("rust: implement `kernel::sync::Refcount`")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-5-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd36f6e2abf7f85644f7ea8deb1de4040b03bbc1 upstream.
For arm32, on a x86_64 builder, running the `rusttest` target yields:
error[E0080]: evaluation of constant value failed
--> rust/kernel/static_assert.rs:37:23
|
37 | const _: () = ::core::assert!($condition $(,$arg)?);
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ the evaluated program panicked at 'assertion failed: size_of::<isize>() == size_of::<isize_atomic_repr>()', rust/kernel/sync/atomic/predefine.rs:68:1
|
::: rust/kernel/sync/atomic/predefine.rs:68:1
|
68 | static_assert!(size_of::<isize>() == size_of::<isize_atomic_repr>());
| -------------------------------------------------------------------- in this macro invocation
|
= note: this error originates in the macro `::core::assert` which comes from the expansion of the macro `static_assert` (in Nightly builds, run with -Z macro-backtrace for more info)
The reason is that `rusttest` runs on the host, so for e.g. a x86_64
builder `isize` is 64 bits but it is not a `CONFIG_64BIT` build.
Fix it by providing a stub for `rusttest` as usual.
Fixes: 84c6d36bcaf9 ("rust: sync: atomic: Add Atomic<{usize,isize}>")
Cc: stable@vger.kernel.org
Reviewed-by: Onur Özkan <work@onurozkan.dev>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260123233432.22703-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 09c3c9112d71c44146419c87c55c710e68335741 upstream.
`build_assert` relies on the compiler to optimize out its error path.
Functions using it with its arguments must thus always be inlined,
otherwise the error path of `build_assert` might not be optimized out,
triggering a build error.
Cc: stable@vger.kernel.org
Fixes: cc84ef3b88f4 ("rust: bits: add support for bits/genmask macros")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20251208-io-build-assert-v3-4-98aded02c1ea@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 426ca15c7f6cb6562a081341ca88893a50c59fa2 upstream.
This patch enhances GSO segment handling by properly checking
the SKB_GSO_DODGY flag for frag_list GSO packets, addressing
low throughput issues observed when a station accesses IPv4
servers via hotspots with an IPv6-only upstream interface.
Specifically, it fixes a bug in GSO segmentation when forwarding
GRO packets containing a frag_list. The function skb_segment_list
cannot correctly process GRO skbs that have been converted by XLAT,
since XLAT only translates the header of the head skb. Consequently,
skbs in the frag_list may remain untranslated, resulting in protocol
inconsistencies and reduced throughput.
To address this, the patch explicitly sets the SKB_GSO_DODGY flag
for GSO packets in XLAT's IPv4/IPv6 protocol translation helpers
(bpf_skb_proto_4_to_6 and bpf_skb_proto_6_to_4). This marks GSO
packets as potentially modified after protocol translation. As a
result, GSO segmentation will avoid using skb_segment_list and
instead falls back to skb_segment for packets with the SKB_GSO_DODGY
flag. This ensures that only safe and fully translated frag_list
packets are processed by skb_segment_list, resolving protocol
inconsistencies and improving throughput when forwarding GRO packets
converted by XLAT.
Signed-off-by: Jibin Zhang <jibin.zhang@mediatek.com>
Fixes: 9fd1ff5d2ac7 ("udp: Support UDP fraglist GRO/GSO.")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260126152114.1211-1-jibin.zhang@mediatek.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a1968bd997f45a9b11aefeabdd1232e1b6c7184 upstream.
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com
Fixes: 809bc86517cc ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 057a6f2632c956483e2b2628477f0fcd1cd8a844 upstream.
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
[1] https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
[2] https://lkml.kernel.org/r/20250224211445.2663312-1-jane.chu@oracle.com
[3] https://lore.kernel.org/lkml/20251116013223.1557158-1-jiaqiyan@google.com/
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0f3c0845a4ff68d403c568266d17e9cc553e561 upstream.
commit 8b47299a411a ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com
Fixes: 8b47299a411a ("mm, swap: mark swap address space ro and add context debug check")
Signed-off-by: robin.kuo <robin.kuo@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: andrew.yang <andrew.yang@mediatek.com>
Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Mathias Brugger <matthias.bgg@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a148a2040191b12b45b82cb29c281cb3036baf90 upstream.
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com
Fixes: 18f41fa616ee ("mm: memory-failure: bump memory failure stats to pglist_data")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 870ff19251bf3910dda7a7245da826924045fedd upstream.
Randomize the KFENCE freelist during pool initialization to make
allocation patterns less predictable. This is achieved by shuffling the
order in which metadata objects are added to the freelist using
get_random_u32_below().
Additionally, ensure the error path correctly calculates the address range
to be reset if initialization fails, as the address increment logic has
been moved to a separate loop.
Link: https://lkml.kernel.org/r/20260120161510.3289089-1-pimyn@google.com
Fixes: 0ce20dd84089 ("mm: add Kernel Electric-Fence infrastructure")
Signed-off-by: Pimyn Girgis <pimyn@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ernesto Martnez Garca <ernesto.martinezgarcia@tugraz.at>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Kees Cook <kees@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4e159150a9a56d66d247f4b5510bed46fe58aa1c upstream.
[BUG]
There is an internal report that over 1000 processes are
waiting at the io_schedule_timeout() of balance_dirty_pages(), causing
a system hang and trigger a kernel coredump.
The kernel is v6.4 kernel based, but the root problem still applies to
any upstream kernel before v6.18.
[CAUSE]
From Jan Kara for his wisdom on the dirty page balance behavior first.
This cgroup dirty limit was what was actually playing the role here
because the cgroup had only a small amount of memory and so the dirty
limit for it was something like 16MB.
Dirty throttling is responsible for enforcing that nobody can dirty
(significantly) more dirty memory than there's dirty limit. Thus when
a task is dirtying pages it periodically enters into balance_dirty_pages()
and we let it sleep there to slow down the dirtying.
When the system is over dirty limit already (either globally or within
a cgroup of the running task), we will not let the task exit from
balance_dirty_pages() until the number of dirty pages drops below the
limit.
So in this particular case, as I already mentioned, there was a cgroup
with relatively small amount of memory and as a result with dirty limit
set at 16MB. A task from that cgroup has dirtied about 28MB worth of
pages in btrfs btree inode and these were practically the only dirty
pages in that cgroup.
So that means the only way to reduce the dirty pages of that cgroup is
to writeback the dirty pages of btrfs btree inode, and only after that
those processes can exit balance_dirty_pages().
Now back to the btrfs part, btree_writepages() is responsible for
writing back dirty btree inode pages.
The problem here is, there is a btrfs internal threshold that if the
btree inode's dirty bytes are below the 32M threshold, it will not
do any writeback.
This behavior is to batch as much metadata as possible so we won't write
back those tree blocks and then later re-COW them again for another
modification.
This internal 32MiB is higher than the existing dirty page size (28MiB),
meaning no writeback will happen, causing a deadlock between btrfs and
cgroup:
- Btrfs doesn't want to write back btree inode until more dirty pages
- Cgroup/MM doesn't want more dirty pages for btrfs btree inode
Thus any process touching that btree inode is put into sleep until
the number of dirty pages is reduced.
Thanks Jan Kara a lot for the analysis of the root cause.
[ENHANCEMENT]
Since kernel commit b55102826d7d ("btrfs: set AS_KERNEL_FILE on the
btree_inode"), btrfs btree inode pages will only be charged to the root
cgroup which should have a much larger limit than btrfs' 32MiB
threshold.
So it should not affect newer kernels.
But for all current LTS kernels, they are all affected by this problem,
and backporting the whole AS_KERNEL_FILE may not be a good idea.
Even for newer kernels I still think it's a good idea to get
rid of the internal threshold at btree_writepages(), since for most cases
cgroup/MM has a better view of full system memory usage than btrfs' fixed
threshold.
For internal callers using btrfs_btree_balance_dirty() since that
function is already doing internal threshold check, we don't need to
bother them.
But for external callers of btree_writepages(), just respect their
requests and write back whatever they want, ignoring the internal
btrfs threshold to avoid such deadlock on btree inode dirty page
balancing.
CC: stable@vger.kernel.org
CC: Jan Kara <jack@suse.cz>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd9e2f5b38f1fdd49b1ab6d3a85f81c14369eacc upstream.
Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz
Fixes: a91befde3503 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Bernd Schubert <bernd@bsbernd.com>
Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c5d5ecf21fdd9ce91e6116feb3aa83cee73352cc upstream.
When running this mptcp_join.sh selftest on older kernel versions not
supporting local endpoints tracking, this test fails because 3 MP_JOIN
ACKs have been received, while only 2 were expected.
It is not clear why only 2 MP_JOIN ACKs were expected on old kernel
versions, while 3 MP_JOIN SYN and SYN+ACK were expected. When testing on
the v5.15.197 kernel, 3 MP_JOIN ACKs are seen, which is also what is
expected in the selftests included in this kernel version, see commit
f4480eaad489 ("selftests: mptcp: add missing join check").
Switch the expected MP_JOIN ACKs to 3. While at it, move this
chk_join_nr helper out of the special condition for older kernel
versions as it is now the same as with more recent ones. Also, invert
the condition to be more logical: what's expected on newer kernel
versions having such helper first.
Fixes: d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-5-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ef9e3a3845d0a20b62b01f5b731debd0364688d upstream.
This validates the previous commit: subflow closed events should contain
an error field when a subflow got closed with an error, e.g. reset or
timeout.
For this test, the chk_evt_nr helper has been extended to check
attributes in the matched events.
In this test, the 2 subflow closed events should have an error.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-4-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8467458dfa61b37e259e3485a5d3e415d08193c1 upstream.
This validates the previous commit: subflow closed events are re-sent
with less info when the initial subflow is disconnected after an error
and each time a subflow is closed after that.
In this new test, the userspace PM is involved because that's how it was
discovered, but it is not specific to it. The initial subflow is
terminated with a RESET, and that will cause the subflow disconnect.
Then, a new subflow is initiated, but also got rejected, which cause a
second subflow closed event, but not a third one.
While at it, in case of failure to get the expected amount of events,
the events are printed.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d82809b6c5f2 ("mptcp: avoid duplicated SUB_CLOSED events")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-2-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dccf46179ddd6c04c14be8ed584dc54665f53f0e upstream.
Some subflow socket errors need to be reported to the MPTCP socket: the
initial subflow connect (MP_CAPABLE), and the ones from the fallback
sockets. The others are not propagated.
The issue is that sock_error() was used to retrieve the error, which was
also resetting the sk_err field. Because of that, when notifying the
userspace about subflow close events later on from the MPTCP worker, the
ssk->sk_err field was always 0.
Now, the error (sk_err) is only reset when propagating it to the msk.
Fixes: 15cc10453398 ("mptcp: deliver ssk errors to msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260127-net-mptcp-dup-nl-events-v1-3-7f71e1bc4feb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9b47d4eea3f7c1f620e95bda1d6221660bde7d7b upstream.
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
[ryabinin.a.a@gmail.com: move kasan_enabled() check, fix build]
Link: https://lkml.kernel.org/r/20260119144509.32767-1-ryabinin.a.a@gmail.com
Link: https://lkml.kernel.org/r/20260113191516.31015-1-ryabinin.a.a@gmail.com
Fixes: d699440f58ce ("mm: fix vrealloc()'s KASAN poisoning logic")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: <joonki.min@samsung-slsi.corp-partner.google.com>
Closes: https://lkml.kernel.org/r/CANP3RGeuRW53vukDy7WDO3FiVgu34-xVJYkfpm08oLO3odYFrA@mail.gmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ca497be00163610afb663867db24ac408752f13 upstream.
Marking the whole controller as sleeping due to the pinctrl calls in the
.direction_{input,output} callbacks has the unfortunate side effect that
legitimate invocations of .get and .set, which cannot themselves sleep,
in atomic context now spew WARN()s from gpiolib.
However, as Heiko points out, the driver doing this is a bit silly to
begin with, as the pinctrl .gpio_set_direction hook doesn't even care
about the direction, the hook is only used to claim the mux. And sure
enough, the .gpio_request_enable hook exists to serve this very purpose,
so switch to that and remove the problematic business entirely.
Cc: stable@vger.kernel.org
Fixes: 20cf2aed89ac ("gpio: rockchip: mark the GPIO controller as sleeping")
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/bddc0469f25843ca5ae0cf578ab3671435ae98a7.1769429546.git.robin.murphy@arm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 891b77d459d0ce993c68365d899134bc9fd47ac0 upstream.
The HP EliteBook 630 G11 (103c:8c8f) is using ALC236 codec which used 0x02
to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk
to make it works.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220828
Cc: <stable@vger.kernel.org>
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/20260126073508.3897461-1-zhangheng@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fcee2cfc4b2e16e62ff8e0cc2cd8dd24efad65e upstream.
There is a race condition in nvmet_bio_done() that can cause a NULL
pointer dereference in blk_cgroup_bio_start():
1. nvmet_bio_done() is called when a bio completes
2. nvmet_req_complete() is called, which invokes req->ops->queue_response(req)
3. The queue_response callback can re-queue and re-submit the same request
4. The re-submission reuses the same inline_bio from nvmet_req
5. Meanwhile, nvmet_req_bio_put() (called after nvmet_req_complete)
invokes bio_uninit() for inline_bio, which sets bio->bi_blkg to NULL
6. The re-submitted bio enters submit_bio_noacct_nocheck()
7. blk_cgroup_bio_start() dereferences bio->bi_blkg, causing a crash:
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
RIP: 0010:blk_cgroup_bio_start+0x10/0xd0
Call Trace:
submit_bio_noacct_nocheck+0x44/0x250
nvmet_bdev_execute_rw+0x254/0x370 [nvmet]
process_one_work+0x193/0x3c0
worker_thread+0x281/0x3a0
Fix this by reordering nvmet_bio_done() to call nvmet_req_bio_put()
BEFORE nvmet_req_complete(). This ensures the bio is cleaned up before
the request can be re-submitted, preventing the race condition.
Fixes: 190f4c2c863a ("nvmet: fix memory leak of bio integrity")
Cc: Dmitry Bogdanov <d.bogdanov@yadro.com>
Cc: stable@vger.kernel.org
Cc: Guangwu Zhang <guazhang@redhat.com>
Link: http://www.mail-archive.com/debian-kernel@lists.debian.org/msg146238.html
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b22ec1685ce1fc0d862dcda3225d852fb107995 upstream.
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get().
Fixes: 2d82e6227ea1 ("efi: vars: Move efivar caching layer into efivarfs")
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
