| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 542127f6528ca7cc3cf61e1651d6ccb58495f953 ]
The Lenovo ThinkPad X390 (ALC257 codec, subsystem ID 0x17aa2288)
does not report headset button press events. Headphone insertion is
detected (SW_HEADPHONE_INSERT), but pressing the inline microphone
button on a headset produces no input events.
Add a SND_PCI_QUIRK entry that maps this subsystem ID to
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK, which enables
headset jack button detection through alc_fixup_headset_jack()
and ThinkPad ACPI integration. This is the same fixup used by
similar ThinkPad models (P1 Gen 3, X1 Extreme Gen 3).
Signed-off-by: Uzair Mughal <contact@uzair.is-a.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260307012906.20093-1-contact@uzair.is-a.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 56fbbe096a89ff4b52af78a21a4afd9d94bdcc80 ]
The BIOS of this machine has set 0x19 to mic, which needs to be set
to headphone pin in order to work properly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220814
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Link: https://patch.msgid.link/b55f6ebe-7449-49f7-ae85-00d2ba1e7af0@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 178dd118c0f07fd63a9ed74cfbd8c31ae50e33af ]
HP Laptop 14s-dr5xxx with ALC236 codec does not handle the toggling of
the mute LED.
This patch adds a quirk entry for subsystem ID 0x8a1f using
ALC236_FIXUP_HP_MUTE_LED_COEFBIT2 fixup, enabling correct mute LED
behavior.
Signed-off-by: Liucheng Lu <luliucheng100@outlook.com>
Link: https://patch.msgid.link/PAVPR03MB9774F3FCE9CCD181C585281AE37BA@PAVPR03MB9774.eurprd03.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 875612a7745013a43c67493cb0583ee3f7476344 ]
The total number of out-of-line (OOL) stubs required for function
tracing is determined using the following command:
$(OBJDUMP) -r -j __patchable_function_entries vmlinux.o
While this works correctly with GNU objdump, llvm-objdump does not
list the expected relocation records for this section. Fix this by
using the -d option and counting R_PPC64_ADDR64 relocation entries.
This works as desired with both objdump and llvm-objdump.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127084926.34497-3-hbathini@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5131fa077f9bb386a1b901bf5b247041f0ec8f80 ]
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.count == 1
Phase 2:
Create a delayed iput for a file in the subvol but leave the subvol in
state where its dentry can be evicted (d_lockref.count == 0)
T1 (task) T2 (writeback) T3 (OE workqueue)
write() // dirty pages
btrfs_writepages()
btrfs_run_delalloc_range()
cow_file_range()
btrfs_alloc_ordered_extent()
igrab() // i_count: 1 -> 2
btrfs_unlink_inode()
btrfs_orphan_add()
close()
__fput()
dput()
finish_dput()
__dentry_kill()
dentry_unlink_inode()
iput() // 2 -> 1
--parent->d_lockref.count // 1 -> 0; evictable
finish_ordered_fn()
btrfs_finish_ordered_io()
btrfs_put_ordered_extent()
btrfs_add_delayed_iput()
Phase 3:
Once the delayed iput is pending and the subvol dentry is evictable,
the shrinker can free it, causing the next lookup to go through
btrfs_lookup() and call btrfs_orphan_cleanup() for the first time.
If the cleaner kthread processes the delayed iput concurrently, the
two race:
T1 (shrinker) T2 (cleaner kthread) T3 (lookup)
super_cache_scan()
prune_dcache_sb()
__dentry_kill()
// subvol dentry freed
btrfs_run_delayed_iputs()
iput() // i_count -> 0
evict() // sets I_FREEING
btrfs_evict_inode()
// truncation loop
btrfs_lookup()
btrfs_lookup_dentry()
btrfs_orphan_cleanup()
// first call (bit never set)
btrfs_iget()
// blocks on I_FREEING
btrfs_orphan_del()
// inode freed
// returns -ENOENT
btrfs_del_orphan_item()
// -ENOENT
// "could not do orphan cleanup -2"
d_splice_alias(NULL, dentry)
// negative dentry for valid subvol
The most straightforward fix is to ensure the invariant that a dentry
for a subvolume can exist if and only if that subvolume has
BTRFS_ROOT_ORPHAN_CLEANUP set on its root (and is known to have no
orphans or ran btrfs_orphan_cleanup()).
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a8464555d2e5f038758bb19e72ab4710b79e9cd ]
bpf_iter_scx_dsq_new() reads dsq->seq via READ_ONCE() without holding
any lock, making dsq->seq a lock-free concurrently accessed variable.
However, dispatch_enqueue(), the sole writer of dsq->seq, uses a plain
increment without the matching WRITE_ONCE() on the write side:
dsq->seq++;
^^^^^^^^^^^
plain write -- KCSAN data race
The KCSAN documentation requires that if one accessor uses READ_ONCE()
or WRITE_ONCE() on a variable to annotate lock-free access, all other
accesses must also use the appropriate accessor. A plain write leaves
the pair incomplete and will trigger KCSAN warnings.
Fix by using WRITE_ONCE() for the write side of the update:
WRITE_ONCE(dsq->seq, dsq->seq + 1);
This is consistent with bpf_iter_scx_dsq_new() and makes the
concurrent access annotation complete and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 239c15116d80f67d32f00acc34575f1a6b699613 ]
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbc7aef517d8765e4c425d2792409bb9bf2e1f13 ]
Same as in __reg64_deduce_bounds(), refine s32/u32 ranges
in __reg32_deduce_bounds() in the following situations:
- s32 range crosses U32_MAX/0 boundary, positive part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxx s32 range xxxxxxxxx] [xxxxxxx|
0 S32_MAX S32_MIN -1
- s32 range crosses U32_MAX/0 boundary, negative part of the s32 range
overlaps with u32 range:
0 U32_MAX
| [xxxxxxxxxxxxxx u32 range xxxxxxxxxxxxxx] |
|----------------------------|----------------------------|
|xxxxxxxxx] [xxxxxxxxxxxx s32 range |
0 S32_MAX S32_MIN -1
- No refinement if ranges overlap in two intervals.
This helps for e.g. consider the following program:
call %[bpf_get_prandom_u32];
w0 &= 0xffffffff;
if w0 < 0x3 goto 1f; // on fall-through u32 range [3..U32_MAX]
if w0 s> 0x1 goto 1f; // on fall-through s32 range [S32_MIN..1]
if w0 s< 0x0 goto 1f; // range can be narrowed to [S32_MIN..-1]
r10 = 0;
1: ...;
The reg_bounds.c selftest is updated to incorporate identical logic,
refinement based on non-overflowing range halves:
((x ∩ [0, smax]) ∩ (y ∩ [0, smax])) ∪
((x ∩ [smin,-1]) ∩ (y ∩ [smin,-1]))
Reported-by: Andrea Righi <arighi@nvidia.com>
Reported-by: Emil Tsalapatis <emil@etsalapatis.com>
Closes: https://lore.kernel.org/bpf/aakqucg4vcujVwif@gpd4/T/
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260306-bpf-32-bit-range-overflow-v3-1-f7f67e060a6b@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd13fc700e3e239826a46448bf7f01847dd26f5a ]
This adds some match entries for a few system configurations:
cs42l43 link 0 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l45 link 0 UID 0
cs35l63 link 1 UID 0
cs35l63 link 1 UID 1
cs42l45 link 0 UID 0
cs35l63 link 1 UID 1
cs35l63 link 1 UID 3
cs42l45 link 1 UID 0
cs35l63 link 0 UID 0
cs35l63 link 0 UID 1
cs42l43 link 1 UID 0
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l56 link 1 UID 0
cs35l56 link 1 UID 1
cs35l56 link 1 UID 2
cs35l56 link 1 UID 3
cs35l63 link 0 UID 0
cs35l63 link 0 UID 2
cs35l63 link 0 UID 4
cs35l63 link 0 UID 6
cs42l43 link 0 UID 1
cs42l43b link 0 UID 1
cs42l45 link 0 UID 0
cs42l45 link 1 UID 0
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20260224130307.526626-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a58d487fb1a52579d3c37544ea371da78ed70c45 ]
Fix a compile error in the kunit tests when CONFIG_PREEMPT_RT is
enabled, and the normal mutex is converted into a rtmutex.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602261547.3bM6yVAS-lkp@intel.com/
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20260304085616.1216961-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ae0d8f1abbbba6f98cac735145e1206927c67d9 ]
The driver sets spec->gen.own_eapd_ctl to take manual control of the
EAPD (External Amplifier). However, senary_init does not turn on the
EAPD, while senary_shutdown turns it off.
Since the generic driver skips EAPD handling when own_eapd_ctl is set,
the EAPD remains off after initialization (e.g., after resume), leaving
the codec in a non-functional state.
Explicitly call senary_auto_turn_eapd in senary_init to ensure the EAPD
is enabled and the codec is functional.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260303081516.583438-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 539d1b47e935e8384977dd7e5cec370c08b7a644 ]
While nr_hw_update allocates tagset tags it acquires ->pcpu_alloc_mutex
after ->freeze_lock is acquired or queue is frozen. This potentially
creates a circular dependency involving ->fs_reclaim if reclaim is
triggered simultaneously in a code path which first acquires ->pcpu_
alloc_mutex. As the queue is already frozen while nr_hw_queue update
allocates tagsets, the reclaim can't forward progress and thus it could
cause a potential deadlock as reported in lockdep splat[1].
Fix this by pre-allocating tagset tags before we freeze queue during
nr_hw_queue update. Later the allocated tagset tags could be safely
installed and used after queue is frozen.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs8F=OV9s3La2kEQ34YndgfZP-B5PHS4Z8_b9euKG6J4mw@mail.gmail.com/ [1]
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
[axboe: fix brace style issue]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a116bac87118903925108e57781bbfc7a7eea27b ]
include/uapi/linux/dma-buf.h uses several macros from ioctl.h to define
its ioctl commands. However, it does not include ioctl.h itself. So,
if userspace source code tries to include the dma-buf.h file without
including ioctl.h, it can result in build failures.
Therefore, include ioctl.h in the dma-buf UAPI header.
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260303002309.1401849-1-isaacmanjarres@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9351cf3fd92dc1349bb75f2f7f7324607dcf596f ]
Move the ASP register patches to a separate struct and apply this from the
ASP DAI probe() function so that the registers are only patched if the DAI
is part of a DAI link.
Some systems use the ASP as a special-purpose interconnect and on these
systems the ASP registers are configured by a third party (the firmware,
the BIOS, or another device using the amp's secondary host control
interface).
If the machine driver does not hook up the ASP DAI then the ASP registers
must be omitted from the patch to prevent overwriting the third party
configuration.
If the machine driver includes the ASP DAI in a DAI link, this implies that
the machine driver and higher components (such as alsa-ucm) are taking
ownership of the ASP. In this case the ASP registers are patched to known
defaults and the machine driver should configure the ASP.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226110137.1664562-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 54a86cf48eaa6d1ab5130d756b718775e81e1748 ]
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_iec958_put_bits() unconditionally returns
0, causing ALSA to not generate any change events. This is detected by
mixer-test with large numbers of messages in the form:
No event generated for Context 3 IEC958 CS5
Context 3 IEC958 CS5.0 orig 5224 read 5225, is_volatile 0
Add a suitable check.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-1-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f4338e5633dc034a81000b2516a78cfb51c601d ]
Add Tegra238 HDA codec device in hda_device_id list.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260302084217.3135982-1-sheetal@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 70eddf6a0a3fc6d3ab6f77251676da97cc7f12ae ]
This adds the necessary quirk for the Alienware 18 Area 51 (2025).
Complements commit 1b03391d073d ("ASoC: Intel: sof_sdw: Add quirk
for Alienware Area 51 (2025) 0CCC SKU").
Signed-off-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com>
Link: https://patch.msgid.link/20260224190224.30630-1-o.freyermuth@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80bf3b28d32b431f84f244a8469488eb6d96afbb ]
The Iomega ZIP 100 (Z100P2) can't process IO Advice Hints Grouping mode
page query. It immediately switches to the status phase 0xb8 after
receiving the subpage code 0x05 of MODE_SENSE_10 command, which fails
imm_out() and turns into DID_ERROR of this command, which leads to unusable
device. This was tested with an Iomega ZIP 100 (Z100P2) connected with a
StarTech PEX1P2 AX99100 PCIe parallel port card.
Prior to this fix, Test Unit Ready fails and the drive can't be used:
IMM: returned SCSI status b8
sd 7:0:6:0: [sdh] Test Unit Ready failed: Result: hostbyte=0x01 driverbyte=DRIVER_OK
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260227181823.892932-1-fuchsfl@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 986841dcad257615a6e3f89231bb38e1f3506b77 ]
This patch fixed the DMIC ch2/3 mask missing problem.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20260225091210.3648905-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbd53975ed4132d161b6a97ebe785a262380182d ]
The driver retains reset history even after the IOC has successfully
reached the READY state. That leaves stale reset information active during
normal operation and can mislead recovery and diagnostics. In addition, if
the IOC becomes READY just as the ready timeout loop exits, the driver
still follows the failure path and may retry or report failure incorrectly.
Clear reset history once READY is confirmed so driver state matches actual
IOC status. After the timeout loop, recheck the IOC state and treat READY
as success instead of failing.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260225082622.82588-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31ddc62c1cd92e51b9db61d7954b85ae2ec224da ]
ALSA controls should return 1 if the value in the control changed but the
control put operation fsl_easrc_set_reg() only returns 0 or a negative
error code, causing ALSA to not generate any change events. Add a suitable
check by using regmap_update_bits_check() with the underlying regmap, this
is more clearly and simply correct than trying to verify that one of the
generic ops is exactly equivalent to this one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260205-asoc-fsl-easrc-fix-events-v1-2-39d4c766918b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f9d69d5e7bde2295eb7488a56f094ac8f5383b92 ]
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 377f8e788945d45b012ed9cfc35ca56c02e86cd8 ]
XG mobile stations have the 0x5a endpoint and has to be initialized:
add them to hid-asus.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e31b556c0ba21f20c298aa61181b96541140b7b9 ]
When an I2C SMBus read operation fails, the MCP2221 internal state machine
may not reset correctly, causing subsequent transactions to fail.
By adding a short delay and explicitly cancelling the last command,
we ensure the device is ready for the next operation.
Fix an issue where i2cdetect was not able to detect all devices correctly
on the bus.
Signed-off-by: Romain Sioen <romain.sioen@microchip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2a3b4a8c10a64a62c4243007139d253dc1324dfd ]
X1 Air is an X1 variant with a newer Intel chipset. It uses the same
registers as the X1. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd0883055b04586770dab43c64159348bf480a3e ]
Aokzoe A2 Pro is an older device that the oxpec driver is missing the
quirk for. It has the same behavior as the AOKZOE A1 devices. Add a
quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 459cb3c054c2352bb321648744b620259a716b60 ]
When CONFIG_DEBUG_INFO_BTF_MODULES is enabled and vmlinux is available,
Makefile.modfinal and gen-btf.sh will try to use resolve_btfids on the
module .ko. install-extmod-build currently does not package
resolve_btfids, so that step fails.
Package resolve_btfids if it may be used.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260226-kbuild-resolve_btfids-v1-1-2bf38b93dfe7@linutronix.de
[nathan: Small commit message tweaks]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15fba71533bcdfaa8eeba69a5a5a2927afdf664a ]
The TRENDnet TUC-ET2G is a RTL8156 based usb ethernet adapter. Add its
vendor and product IDs.
Signed-off-by: Valentin Spreckels <valentin@spreckels.dev>
Link: https://patch.msgid.link/20260226195409.7891-2-valentin@spreckels.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4049c46edb5d44c0de045f6f504371705dd603dd ]
X1z is a variant of OneXPlayer X1 A with 8840U. It seems that only one
user has this one. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7c698de0dc5daa1e1a5fd1f0c6aa1b6bb2f5d867 ]
EPOMAKER TH87 has the very same ID as Apple Aluminum keyboard
(05ac:024f) although it doesn't work as expected in compatible way.
Put three entries to the non-apple keyboards list to exclude this
device: one for BT ("TH87"), one for USB ("HFD Epomaker TH87") and one
for dongle ("2.4G Wireless Receiver").
Link: https://bugzilla.suse.com/show_bug.cgi?id=1258455
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3385ea97c14d271dcb0c6e6fcf16972f819eecd8 ]
OneXPlayer Apex is a new Strix Halo handheld. It uses the same registers
as the OneXPlayer Fly devices. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22f8bcec5aeb05104b3eaa950cb5a345e95f0aa8 ]
Add device IDs of Nova Lake-H and Nova Lake-S into ishtp support list.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91e8c6e601bdc1ccdf886479b6513c01c7e51c2c ]
The magicmouse_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f3518d77419255f8b12bb23c8ec22acbeb6bc5b ]
Battery reporting does not work for the Apple Magic Trackpad 2 if it is
connected via USB. The current hid descriptor fixup code checks for a
hid descriptor length of exactly 83 bytes. If the hid descriptor is
larger, which is the case for newer apple mice, the fixup is not
applied.
This fix checks for hid descriptor sizes greater/equal 83 bytes which
applies the fixup for newer devices as well.
Signed-off-by: Julius Lehmann <lehmanju@devpi.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 166e31d7dbf6aa44829b98aa446bda5c9580f12a ]
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
on SUPI S10
[ Upstream commit 7d87ed70fc95482c12edf9493c249b6413be485e ]
The touchscreen on the SUPI S10 tablet reports inverted Y coordinates,
causing touch input to be mirrored vertically relative to the display.
Add a quirk to set the "touchscreen-inverted-y" boolean device-property
on the touchscreen device, so that the goodix_ts driver will fixup
the coordinates.
Reported-by: Yajat Kumar <yajatapps3@gmail.com>
Closes: https://lore.kernel.org/linux-input/20251230221639.582406-1-yajatapps3@gmail.com/
Tested-by: Yajat Kumar <yajatapps3@gmail.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260217132346.34535-1-johannes.goede@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b38d478dad79e61e8a65931021bdfd7a71741212 ]
The Lenovo ThinkPad X1 Fold 16 Gen 1 has physical volume up/down
buttons that are handled through the intel-hid 5-button array
interface. The firmware does not advertise 5-button array support via
HEBC, so the driver relies on a DMI allowlist to enable it.
Add the ThinkPad X1 Fold 16 Gen 1 to the button_array_table so the
volume buttons work out of the box.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210085625.34380-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c99a545b372c77b5d39715968a141f523eccbf2 ]
The HP Omen 16-xd0xxx (board ID: 8BCD) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-xd0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Tested-by: Varad Amol Pisale <varadpisale.work@gmail.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260218050235.94687-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0a1fc2f301529ac75aec0ce80d5ab9d9e4dc4b16 ]
The DHCHAP secrets (dhchap_secret and dhchap_ctrl_secret) contain
authentication key material for NVMe-oF. Use kfree_sensitive() instead
of kfree() in nvmf_free_options() to ensure secrets are zeroed before
the memory is freed, preventing recovery from freed pages.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4735b510a00fb2d4ac9e8d21a8c9552cb281f585 ]
If the user reduces the special queue count at runtime and resets the
controller, we need to reduce the number of queues and interrupts
requested accordingly rather than start with the pre-allocated queue
count.
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b3fa0615cd8432148581de62a52f83847af3d70 ]
The Dell 14 Plus 2-in-1 (model DB04250) requires the VGBS allow list
entry to correctly enable the tablet mode switch. Without this, the
chassis state is not reported, and the hinge rotation only emits
unknown scancodes.
Verified on Dell 14 Plus 2-in-1 DB04250.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221090
Signed-off-by: Peter Metz <peter.metz@unarin.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213044627.203638-1-peter.metz@unarin.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2bad24c17742fc88973d6aea526ce1353f5334a3 ]
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Günther Noack <gnoack@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13fa3aaf02edaad9b41fc61d7f6326d2b6a4bf80 ]
The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-wf0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Suggested-by: Noah Provenzano <noahpro@gmail.com>
Tested-by: Juan Martin Morales <juanm4morales@gmail.com>
Reported-by: Juan Martin Morales <juanm4morales@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220639
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260216072003.90151-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a6f22e50c7d51aa225c392c62c33f0fae11f734d ]
This reverts commit e3f6a42272e028c46695acc83fc7d7c42f2750ad.
The commit says that the tracepoint only deals with the current task,
however the following case is not current task:
comm_write() {
p = get_proc_task(inode);
if (!p)
return -ESRCH;
if (same_thread_group(current, p))
set_task_comm(p, buffer);
}
where set_task_comm() calls __set_task_comm() which records
the update of p and not current.
So revert the patch to show pid.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <elver@google.com>
Cc: <kees@kernel.org>
Link: https://patch.msgid.link/20260306075954.4533-1-xuewen.yan@unisoc.com
Fixes: e3f6a42272e0 ("tracing: Remove pid in task_rename tracing output")
Reported-by: Guohua Yan <guohua.yan@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c845894ebd6fb43226b3118d6b017942550910c5 ]
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode.
Fixes: bffacdb80b93 ("bpf: Recognize special arithmetic shift in the verifier")
Signed-off-by: Daniel Wade <danjwade95@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260314021521.128361-2-danjwade95@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c77b30bd1dcb61f66c640ff7d2757816210c7cb0 ]
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs().
Fixes: ec0e2da95f72 ("bpf: Support new signed div/mod instructions.")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Jenny Guanni Qu <qguanni@gmail.com>
Link: https://lore.kernel.org/r/20260311011116.2108005-2-qguanni@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c2128505f61b504c79a20b89596feba61388112 ]
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098
Assisted-by: Claude:claude-opus-4-6
Fixes: f18b03fabaa9 ("bpf: Implement BPF exceptions")
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260320000809.643798-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be5c5280cf2b20e363dc8e2a424dd200a29b1c77 ]
During the cxl_acpi probe process, it checks whether the cxl_nvb device
and driver have been attached. Currently, the startup priority of the
cxl_pmem driver is lower than that of the cxl_acpi driver. At this point,
the cxl_nvb driver has not yet been registered on the cxl_bus, causing
the attachment check to fail. This results in a failure to add the root
nvdimm bridge, leading to a cxl_acpi probe failure and ultimately
affecting the subsequent loading of cxl drivers. As a consequence, only
one mem device object exists on the cxl_bus, while the cxl_port device
objects and decoder device objects are missing.
The solution is to raise the startup priority of cxl_pmem to be higher
than that of cxl_acpi, ensuring that the cxl_pmem driver is registered
before the aforementioned attachment check occurs.
Co-developed-by: Wang Yinfeng <wangyinfeng@phytium.com.cn>
Signed-off-by: Wang Yinfeng <wangyinfeng@phytium.com.cn>
Signed-off-by: Cui Chao <cuichao1753@phytium.com.cn>
Fixes: e7e222ad73d9 ("cxl: Move devm_cxl_add_nvdimm_bridge() to cxl_pmem.ko")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260319074535.1709250-1-cuichao1753@phytium.com.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 146bd2a87a65aa407bb17fac70d8d583d19aba06 ]
Gregory reported in [0] that the global_map_resize test when run in
repeatedly ends up failing during program load. This stems from the fact
that BTF reference has not dropped to zero after the previous run's
module is unloaded, and the older module's BTF is still discoverable and
visible. Later, in libbpf, load_module_btfs() will find the ID for this
stale BTF, open its fd, and then it will be used during program load
where later steps taking module reference using btf_try_get_module()
fail since the underlying module for the BTF is gone.
Logically, once a module is unloaded, it's associated BTF artifacts
should become hidden. The BTF object inside the kernel may still remain
alive as long its reference counts are alive, but it should no longer be
discoverable.
To fix this, let us call btf_free_id() from the MODULE_STATE_GOING case
for the module unload to free the BTF associated IDR entry, and disable
its discovery once module unload returns to user space. If a race
happens during unload, the outcome is non-deterministic anyway. However,
user space should be able to rely on the guarantee that once it has
synchronously established a successful module unload, no more stale
artifacts associated with this module can be obtained subsequently.
Note that we must be careful to not invoke btf_free_id() in btf_put()
when btf_is_module() is true now. There could be a window where the
module unload drops a non-terminal reference, frees the IDR, but the
same ID gets reused and the second unconditional btf_free_id() ends up
releasing an unrelated entry.
To avoid a special case for btf_is_module() case, set btf->id to zero to
make btf_free_id() idempotent, such that we can unconditionally invoke it
from btf_put(), and also from the MODULE_STATE_GOING case. Since zero is
an invalid IDR, the idr_remove() should be a noop.
Note that we can be sure that by the time we reach final btf_put() for
btf_is_module() case, the btf_free_id() is already done, since the
module itself holds the BTF reference, and it will call this function
for the BTF before dropping its own reference.
[0]: https://lore.kernel.org/bpf/cover.1773170190.git.grbell@redhat.com
Fixes: 36e68442d1af ("bpf: Load and verify kernel module BTFs")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Reported-by: Gregory Bell <grbell@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260312205307.1346991-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b38efc05bf7a8568ec74bfffea0f5cfa62bc01d ]
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
