| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260512173932.810559588@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Mark Brown <broonie@kerenl.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20260513153743.326058350@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 996454bc0da84d5a1dedb1a7861823087e01a7ae upstream.
smb_inherit_dacl() walks the parent directory DACL loaded from the
security descriptor xattr. It verifies that each ACE contains the fixed
SID header before using it, but does not verify that the variable-length
SID described by sid.num_subauth is fully contained in the ACE.
A malformed inheritable ACE can advertise more subauthorities than are
present in the ACE. compare_sids() may then read past the ACE.
smb_set_ace() also clamps the copied destination SID, but used the
unchecked source SID count to compute the inherited ACE size. That could
advance the temporary inherited ACE buffer pointer and nt_size accounting
past the allocated buffer.
Fix this by validating the parent ACE SID count and SID length before
using the SID during inheritance. Compute the inherited ACE size from the
copied SID so the size matches the bounded destination SID. Reject the
inherited DACL if size accumulation would overflow smb_acl.size or the
security descriptor allocation size.
Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Shota Zaizen <s@zaizen.me>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c21b90f77687075115d989e53a8ec5e2bb427ab1 upstream.
Make sure resources are not improperly shared in the op cache and
cause instruction corruption this way.
Signed-off-by: Prathyushi Nangia <prathyushi.nangia@amd.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4ce98bf0865c349e7026ad9c14f48da264920953 upstream
It appears that there is nothing in the wake-up path that
evaluates whether the in-kernel interrupts are pending unless
we have a vgic.
This means that the userspace irqchip support has been broken for
about four years, and nobody noticed. It was also broken before
as we wouldn't wake-up on a PMU interrupt, but hey, who cares...
It is probably time to remove the feature altogether, because it
was a terrible idea 10 years ago, and it still is.
Fixes: b57de4ffd7c6d ("KVM: arm64: Simplify kvm_cpu_has_pending_timer()")
Link: https://patch.msgid.link/20260423163607.486345-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fad217e16fded7f3c09f8637b0f6a224d58b5f2e ]
When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func()
invokes the subsystem's ext->regfunc() before attempting to install the
new probe via func_add(). If func_add() then fails (for example, when
allocate_probes() cannot allocate a new probe array under memory pressure
and returns -ENOMEM), the function returns the error without calling the
matching ext->unregfunc(), leaving the side effects of regfunc() behind
with no installed probe to justify them.
For syscall tracepoints this is particularly unpleasant: syscall_regfunc()
bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task.
After a leaked failure, the refcount is stuck at a non-zero value with no
consumer, and every task continues paying the syscall trace entry/exit
overhead until reboot. Other subsystems providing regfunc()/unregfunc()
pairs exhibit similarly scoped persistent state.
Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the
func_add() error path, gated on the same condition used there so the
unwind is symmetric with the registration.
Fixes: 8cf868affdc4 ("tracing: Have the reg function allow to fail")
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260413190601.21993-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ changed `tp->ext->unregfunc` to `tp->unregfunc` to match older struct layout ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 62e037aa8cf5a69b7ea63336705a35c897b9db2b ]
The previous implementation of __mt7925_mcu_set_clc() set the TLV length
field (.len) incorrectly during CLC command construction. The length was
initialized as sizeof(req) - 4, regardless of the actual segment length.
This could cause the WiFi firmware to misinterpret the command payload,
resulting in command execution errors.
This patch moves the TLV length assignment to after the segment is
selected, and sets .len to sizeof(req) + seg->len - 4, matching the
actual command content. This ensures the firmware receives the
correct TLV length and parses the command properly.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: stable@vger.kernel.org
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/f56ae0e705774dfa8aab3b99e5bbdc92cd93523e.1772011204.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0bb05e6adfa99a2ea1fee1125cc0953409f83ed8 ]
The CPU receives frames from the MAC through conventional DMA: the CPU
allocates buffers for the MAC, then the MAC fills them and returns
ownership to the CPU. For each hardware RX queue, the CPU and MAC
coordinate through a shared ring array of DMA descriptors: one
descriptor per DMA buffer. Each descriptor includes the buffer's
physical address and a status flag ("OWN") indicating which side owns
the buffer: OWN=0 for CPU, OWN=1 for MAC. The CPU is only allowed to set
the flag and the MAC is only allowed to clear it, and both must move
through the ring in sequence: thus the ring is used for both
"submissions" and "completions."
In the stmmac driver, stmmac_rx() bookmarks its position in the ring
with the `cur_rx` index. The main receive loop in that function checks
for rx_descs[cur_rx].own=0, gives the corresponding buffer to the
network stack (NULLing the pointer), and increments `cur_rx` modulo the
ring size. After the loop exits, stmmac_rx_refill(), which bookmarks its
position with `dirty_rx`, allocates fresh buffers and rearms the
descriptors (setting OWN=1). If it fails any allocation, it simply stops
early (leaving OWN=0) and will retry where it left off when next called.
This means descriptors have a three-stage lifecycle (terms my own):
- `empty` (OWN=1, buffer valid)
- `full` (OWN=0, buffer valid and populated)
- `dirty` (OWN=0, buffer NULL)
But because stmmac_rx() only checks OWN, it confuses `full`/`dirty`. In
the past (see 'Fixes:'), there was a bug where the loop could cycle
`cur_rx` all the way back to the first descriptor it dirtied, resulting
in a NULL dereference when mistaken for `full`. The aforementioned
commit resolved that *specific* failure by capping the loop's iteration
limit at `dma_rx_size - 1`, but this is only a partial fix: if the
previous stmmac_rx_refill() didn't complete, then there are leftover
`dirty` descriptors that the loop might encounter without needing to
cycle fully around. The current code therefore panics (see 'Closes:')
when stmmac_rx_refill() is memory-starved long enough for `cur_rx` to
catch up to `dirty_rx`.
Fix this by explicitly checking, before advancing `cur_rx`, if the next
entry is dirty; exit the loop if so. This prevents processing of the
final, used descriptor until stmmac_rx_refill() succeeds, but
fully prevents the `cur_rx == dirty_rx` ambiguity as the previous bugfix
intended: so remove the clamp as well. Since stmmac_rx_zc() is a
copy-paste-and-tweak of stmmac_rx() and the code structure is identical,
any fix to stmmac_rx() will also need a corresponding fix for
stmmac_rx_zc(). Therefore, apply the same check there.
In stmmac_rx() (not stmmac_rx_zc()), a related bug remains: after the
MAC sets OWN=0 on the final descriptor, it will be unable to send any
further DMA-complete IRQs until it's given more `empty` descriptors.
Currently, the driver simply *hopes* that the next stmmac_rx_refill()
succeeds, risking an indefinite stall of the receive process if not. But
this is not a regression, so it can be addressed in a future change.
Fixes: b6cb4541853c7 ("net: stmmac: avoid rx queue overrun")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221010
Cc: stable@vger.kernel.org
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://patch.msgid.link/20260422044503.5349-1-CFSworks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6b4286e0550814cdc4b897f881ec1fa8b0313227 ]
STMMAC_GET_ENTRY() doesn't describe what this macro is doing - it is
incrementing the provided index for the circular array of descriptors.
Replace "GET" with "NEXT" as this better describes the action here.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2vba-0000000DbWo-1oL5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0bb05e6adfa9 ("net: stmmac: Prevent NULL deref when RX memory exhausted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 876cfb20e8892143c0c967b3657074f9131f9b5f ]
stmmac_rx() declares a local variable named "buf_sz" but there is also
a global variable for a module parameter which is called the same. To
avoid confusion, rename the local variable.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/E1tpswi-005U6C-Py@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0bb05e6adfa9 ("net: stmmac: Prevent NULL deref when RX memory exhausted")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e5c33cdc6f402eab8abd36ecf436b22c9d3a8aff ]
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62e3 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit.
Reported-by: syzbot+8fa95c41eafbc9d2ff6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8fa95c41eafbc9d2ff6f
Fixes: 597603d615d2 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Cc: stable@vger.kernel.org
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260424-alsa-aloop-peer-stop-uaf-v2-1-94e68101db8a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ used scoped_guard(spinlock_irq) instead of guard(spinlock_irq) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 177730a273b18e195263ed953853273e901b5064 ]
Use print_hex_dump_devel() for dumping sensitive HMAC key bytes in
hash_digest_key() to avoid leaking secrets at runtime when
CONFIG_DYNAMIC_DEBUG is enabled.
Fixes: 045e36780f11 ("crypto: caam - ahash hmac support")
Fixes: 3f16f6c9d632 ("crypto: caam/qi2 - add support for ahash algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d134feeb5df33fbf77f482f52a366a44642dba09 ]
Add print_hex_dump_devel() as the hex dump equivalent of pr_devel(),
which emits output only when DEBUG is enabled, but keeps call sites
compiled otherwise.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 177730a273b1 ("crypto: caam - guard HMAC key hex dumps in hash_digest_key")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5638504a2aa9e1b9d72af9060df1a160cce2d379 ]
gtp_genl_send_echo_req() runs as a generic netlink doit handler in
process context with BH not disabled. It calls udp_tunnel_xmit_skb(),
which eventually invokes iptunnel_xmit() — that uses __this_cpu_inc/dec
on softnet_data.xmit.recursion to track the tunnel xmit recursion level.
Without local_bh_disable(), the task may migrate between
dev_xmit_recursion_inc() and dev_xmit_recursion_dec(), breaking the
per-CPU counter pairing. The result is stale or negative recursion
levels that can later produce false-positive
SKB_DROP_REASON_RECURSION_LIMIT drops on either CPU.
The other udp_tunnel_xmit_skb() call sites in gtp.c are unaffected:
the data path runs under ndo_start_xmit and the echo response handlers
run from the UDP encap rx softirq, both with BH already disabled.
Fix it by disabling BH around the udp_tunnel_xmit_skb() call, mirroring
commit 2cd7e6971fc2 ("sctp: disable BH before calling
udp_tunnel_xmit_skb()").
Fixes: 6f1a9140ecda ("net: add xmit recursion limit to tunnel xmit functions")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260417055408.4667-1-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 21e161de2dc660b1bb70ef5b156ab8e6e1cca3ab ]
Some crafted images can have illegal (!partial_decoding &&
m_llen < m_plen) extents, and the LZ4 inplace decompression path
can be wrongly hit, but it cannot handle (outpages < inpages)
properly: "outpages - inpages" wraps to a large value and
the subsequent rq->out[] access reads past the decompressed_pages
array.
However, such crafted cases can correctly result in a corruption
report in the normal LZ4 non-inplace path.
Let's add an additional check to fix this for backporting.
Reproducible image (base64-encoded gzipped blob):
H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g
dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i
PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz
2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w
ywAAAAAAAADwu14ATsEYtgBQAAA=
$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt
$ dd if=/mnt/data of=/dev/null bs=4096 count=1
Fixes: 598162d05080 ("erofs: support decompress big pcluster for lz4 backend")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9ae77198d4815c63fc8ebacc659c71d150d1e51b ]
- Add some useful comments to explain inplace I/Os and decompression;
- Rearrange the code to get rid of one unnecessary goto.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Stable-dep-of: 21e161de2dc6 ("erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0243cc257ffa6d8cb210a3070b687fb510f113c7 ]
It seems that all compressors need those two values, so just move
them into the common structure.
`struct z_erofs_lz4_decompress_ctx` can be dropped too.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250305124007.1810731-1-hsiangkao@linux.alibaba.com
Stable-dep-of: 21e161de2dc6 ("erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit adb3faf2db1a66d0f015b44ac909a32dfc7f2f9c ]
The bounce buffers are allocated with __get_free_pages() using
BOUNCE_BUFFER_ORDER (order 2 = 4 pages), but both the allocation error
path and nx842_crypto_free_ctx() release the buffers with free_page().
Use free_pages() with the matching order instead.
Fixes: ed70b479c2c0 ("crypto: nx - add hardware 842 crypto comp alg")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 90c500e4fd83fa33c09bc7ee23b6d9cc487ac733 ]
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b:00007fff1ab55718 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffacad55eae
RDX: 000055740c64e5b0 RSI: 000055740c64e630 RDI: 000055740c651ab0
RBP: 000055740c64e380 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000055740c64e5b0 R14: 000055740c651ab0 R15: 000055740c64e380
</TASK>
After applying this patch, the warning no longer appears.
Fixes: 89ac9b4d3d1a ("hfsplus: fix longname handling")
CC: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b6b592275aeff184aa82fcf6abccd833fb71b393 ]
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed.
Reported-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d80abb5b890d39261e72
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: syzbot+d80abb5b890d39261e72@syzkaller.appspotmail.com
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/all/20260120051114.1281285-1-kartikey406@gmail.com/ [v1]
Link: https://lore.kernel.org/all/20260121063109.1830263-1-kartikey406@gmail.com/ [v2]
Link: https://lore.kernel.org/all/20260212014233.2422046-1-kartikey406@gmail.com/ [v3]
Link: https://lore.kernel.org/all/20260214002100.436125-1-kartikey406@gmail.com/T/ [v4]
Link: https://lore.kernel.org/all/20260221061626.15853-1-kartikey406@gmail.com/T/ [v5]
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260307010302.41547-1-kartikey406@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Stable-dep-of: 90c500e4fd83 ("hfsplus: fix held lock freed on hfsplus_fill_super()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7866ce992cf0d3c3b50fe8bf4acb1dbb173a2304 ]
Factory default for this bit is "set" (at least on the chips I have),
but we must make sure it is actually set by Linux explicitly, as the
bit is writable by an earlier stage.
Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
[ adapted chip name W25N02JW to W25N02JWZEIF and applied flag change via read_cache_variants context instead of read_cache_dual_quad_dtr_variants ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 08841b06fa64d8edbd1a21ca6e613420c90cc4b8 ]
Mounting a crafted UDF image with repeated partition descriptors can
trigger a heap out-of-bounds write in part_descs_loc[].
handle_partition_descriptor() deduplicates entries by partition number,
but appended slots never record partnum. As a result duplicate
Partition Descriptors are appended repeatedly and num_part_descs keeps
growing.
Once the table is full, the growth path still sizes the allocation from
partnum even though inserts are indexed by num_part_descs. If partnum is
already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep
the old capacity and the next append writes past the end of the table.
Store partnum in the appended slot and size growth from the next append
count so deduplication and capacity tracking follow the same model.
Fixes: ee4af50ca94f ("udf: Fix mounting of Win7 created UDF filesystems")
Cc: stable@vger.kernel.org
Signed-off-by: Seohyeon Maeng <bioloidgp@gmail.com>
Link: https://patch.msgid.link/20260310081652.21220-1-bioloidgp@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
[ replaced kzalloc_objs() helper with equivalent kcalloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d6bf2e64dec87322f2b11565ddb59c0e967f96e3 ]
Kingston eMMC IY2964 and IB2932 takes a fixed ~2 seconds for each secure
erase/trim operation regardless of size - that is, a single secure
erase/trim operation of 1MB takes the same time as 1GB. With default
calculated 3.5MB max discard size, secure erase 1GB requires ~300 separate
operations taking ~10 minutes total.
Add a card quirk, MMC_QUIRK_FIXED_SECURE_ERASE_TRIM_TIME, to set maximum
secure erase size for those devices. This allows 1GB secure erase to
complete in a single operation, reducing time from 10 minutes to just 2
seconds.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[ adapted to use mmc_can_secure_erase_trim()/mmc_can_trim() and placed helper after mmc_card_no_uhs_ddr50_tuning() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dd66b42854705e4e4ee7f14d260f86c578bed3e3 ]
napi_build_skb() can return NULL on allocation failure. In
__octep_vf_oq_process_rx(), the result is used directly without a NULL
check in both the single-buffer and multi-fragment paths, leading to a
NULL pointer dereference.
Add NULL checks after both napi_build_skb() calls, properly advancing
descriptors and consuming remaining fragments on failure.
Fixes: 1cd3b407977c ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Link: https://patch.msgid.link/20260409184009.930359-3-devnexen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ inlined missing octep_vf_oq_next_idx() helper as read_idx++ with wraparound ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3023c050af3600bf451153335dea5e073c9a3088 ]
Depending on the architecture the transfer buffer may share a cacheline
with the following mutex. As the buffer may be used for DMA, that is
problematic.
Use the high-level DMA helpers to make sure that cacheline sharing can
not happen.
Also drop the comment, as the helpers are documentation enough.
https://sashiko.dev/#/message/20260408175814.934BFC19421%40smtp.kernel.org
Fixes: 4381a36abdf1c ("hwmon: add POWER-Z driver")
Cc: stable@vger.kernel.org # ca085faabb42: dma-mapping: add __dma_from_device_group_begin()/end()
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260408-powerz-cacheline-alias-v1-1-1254891be0dd@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ca085faabb42c31ee204235facc5a430cb9e78a9 ]
When a structure contains a buffer that DMA writes to alongside fields
that the CPU writes to, cache line sharing between the DMA buffer and
CPU-written fields can cause data corruption on non-cache-coherent
platforms.
Add __dma_from_device_group_begin()/end() annotations to ensure proper
alignment to prevent this:
struct my_device {
spinlock_t lock1;
__dma_from_device_group_begin();
char dma_buffer1[16];
char dma_buffer2[16];
__dma_from_device_group_end();
spinlock_t lock2;
};
Message-ID: <19163086d5e4704c316f18f6da06bc1c72968904.1767601130.git.mst@redhat.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 3023c050af36 ("hwmon: (powerz) Avoid cacheline sharing for DMA buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be164349e173a8e71cd76f17c7ed720813b8d69b ]
Back in the day a lot of logic was implemented inline in dma-mapping.h and
needed various includes. Move of this has long been moved out of line,
so we can drop various includes to improve kernel rebuild times.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Stable-dep-of: 3023c050af36 ("hwmon: (powerz) Avoid cacheline sharing for DMA buffer")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 880bd496ec72a6dcb00cb70c430ef752ba242ae7 ]
In preparation to adding LSM blob to backing_file struct, factor out
helpers init_backing_file() and backing_file_free().
Cc: stable@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org
Cc: linux-erofs@lists.ozlabs.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
[PM: use the term "LSM blob", fix comment style to match file]
Signed-off-by: Paul Moore <paul@paul-moore.com>
[ Used kfree() instead of kmem_cache_free(bfilp_cachep, ff) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9ded47ad003f09a94b6a710b5c47f4aa5ceb7429 ]
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support")
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Helge Deller <deller@gmx.de>
[ replaced `kzalloc_obj()` with `kzalloc(sizeof(*fbdefio_state), GFP_KERNEL)` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4fddde2a732de60bb97e3307d4eb69ac5f1d2b74 upstream.
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA.
Reported-by: Weiming Shi <bestswngs@gmail.com>
Reported-by: Xiang Mei <xmei5@asu.edu>
Fixes: 317460317a02 ("bpf: Introduce bpf_arena.")
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260413194245.21449-1-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 49f33840dcc907d21313d369e34872880846b61c upstream.
When firmware enables 64-bit PCI host bridge support, some root bridges
already provide valid 64-bit mem resource windows through ACPI.
In this case, the LoongArch-specific mem resource high-bits fixup in
acpi_prepare_root_resources() should not be applied unconditionally.
Otherwise, the kernel may override the native resource layout derived
from firmware, and later BAR assignment can fail to place device BARs
into the intended 64-bit address space correctly.
Add a per-root-bridge ACPI flag, PCIH, and evaluate it from the current
root bridge device scope. When PCIH is set, skip the mem resource high-
bits fixup path and let the kernel use the firmware-provided resource
description directly. When PCIH is absent or cleared, keep the existing
behavior and continue filling the high address bits from the host bridge
address.
This makes the behavior per-root-bridge configurable and avoids breaking
valid 64-bit BAR space allocation on bridges whose 64-bit windows have
already been fully described by firmware.
Cc: stable@vger.kernel.org
Suggested-by: Chao Li <lichao@loongson.cn>
Tested-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Dongyan Qian <qiandongyan@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81e18777d61440511451866c7c80b34a8bdd6b33 upstream.
kvm_flush_pte() is the only caller that directly assigns *pte instead
of using the kvm_set_pte() wrapper. Use the wrapper for consistency with
the rest of the file.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5a873d77ba792410a796595a917be6a440f9b7d2 upstream.
When timer interrupt arrives in guest kernel, guest kernel clears the
timer interrupt and program timer with the next incoming event.
During this stage, timer tick is -1 and timer interrupt status is
disabled in ESTAT register. KVM hypervisor need write zero with timer
tick register and wait timer interrupt injection from HW side, and
then clear timer interrupt.
So there is 2 cycle delay in KVM hypervisor to emulate such scenery,
and the delay is unnecessary if there is no need to clear the timer
interrupt.
Here move 2 cycle delay into timer clear scenery and add timer ESTAT
checking after delay, and set max timer expire value if timer interrupt
does not arrive still.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2433f3f5724b3af569d9fb411ba728629524738b upstream.
With passthrough HW timer, timer interrupt is injected by HW. When
inject emulated CPU interrupt by software such SIP0/SIP1/IPI, HW timer
interrupt may be lost.
Here check whether there is timer tick value inversion before and after
injecting emulated CPU interrupt by software, timer enabling by reading
timer cfg register is skipped. If the timer tick value is detected with
changing, then timer should be enabled. And inject a timer interrupt by
software if there is.
Cc: <stable@vger.kernel.org>
Fixes: f45ad5b8aa93 ("LoongArch: KVM: Implement vcpu interrupt operations").
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b323a441da602dfdfc24f30d3190cac786ffebf2 upstream.
Insert the appropriate UNWIND hint into the kvm_exc_entry assembly
function to guide the generation of correct ORC table entries, thereby
solving the timeout problem ("unreliable stack") while loading the
livepatch-sample module on a physical machine running virtual machines
with multiple vcpus.
Cc: stable@vger.kernel.org
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3e31a6650d4cab63f0814c37c0b360372c6ee9e upstream.
It doesn't make sense to return the recommended maximum number of vCPUs
which exceeds the maximum possible number of vCPUs.
Other architectures have already done this, such as commit 57a2e13ebdda
("KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS")
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Qiang Ma <maqianga@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8dfa2f8780e486d05b9a0ffce70b8f5fbd62053e upstream.
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4
Cc: stable@vger.kernel.org
Fixes: 95db0c9f526d ("LoongArch: Workaround LS2K/LS7A GPU DMA hang bug")
Link: https://gist.github.com/opsiff/ebf2dac51b4013d22462f2124c55f807
Link: https://gist.github.com/opsiff/a62f2a73db0492b3c49bf223a339b133
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5bb0aed57ba944f8c201e4e82ec066e0187e0f85 upstream.
fix_host_ownership() walks the hypervisor's stage-1 page-table to
adjust the host's stage-2 accordingly. Any such adjustment that
requires cache maintenance operations depends on the per-CPU hyp
fixmap being present. However, fix_host_ownership() is currently
called before fix_hyp_pgtable_refcnt() and hyp_create_fixmap(), so
the fixmap does not yet exist when it runs.
This is benign today because the host stage-2 starts empty and no
CMOs are needed, but it becomes a latent crash as soon as
fix_host_ownership() is extended to operate on a non-empty
page-table.
Reorder the calls so that fix_hyp_pgtable_refcnt() and
hyp_create_fixmap() complete before fix_host_ownership() is invoked.
Fixes: 0d16d12eb26e ("KVM: arm64: Fix-up hyp stage-1 refcounts for all pages mapped at EL2")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260424084908.370776-7-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0e6ae45af17e8b27958830595799c702ffbab8d upstream.
The uaccess write handlers for GICD_IIDR in both GICv2 and GICv3
extract the revision field from 'reg' (the current IIDR value read back
from the emulated distributor) instead of 'val' (the value userspace is
trying to write). This means userspace can never actually change the
implementation revision — the extracted value is always the current one.
Fix the FIELD_GET to use 'val' so that userspace can select a different
revision for migration compatibility.
Fixes: 49a1a2c70a7f ("KVM: arm64: vgic-v3: Advertise GICR_CTLR.{IR, CES} as a new GICD_IIDR revision")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://patch.msgid.link/20260407210949.2076251-2-dwmw2@infradead.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b635f2ecdb5ad34f9c967cabb704d6bed9382fd0 upstream.
In f2fs_init_sysfs(), all failure paths after kset_register() jump to
put_kobject, which unconditionally releases both f2fs_tune and
f2fs_feat.
If kobject_init_and_add(&f2fs_feat, ...) fails, f2fs_tune has not been
initialized yet, so calling kobject_put(&f2fs_tune) is invalid.
Fix this by splitting the unwind path so each error path only releases
objects that were successfully initialized.
Fixes: a907f3a68ee26ba4 ("f2fs: add a sysfs entry to reclaim POSIX_FADV_NOREUSE pages")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ed78aeebef05212ef7dca93bd931e4eff67c113f upstream.
f2fs_destroy_extent_node() does not set FI_NO_EXTENT before clearing
extent nodes. When called from f2fs_drop_inode() with I_SYNC set,
concurrent kworker writeback can insert new extent nodes into the same
extent tree, racing with the destroy and triggering f2fs_bug_on() in
__destroy_extent_node(). The scenario is as follows:
drop inode writeback
- iput
- f2fs_drop_inode // I_SYNC set
- f2fs_destroy_extent_node
- __destroy_extent_node
- while (node_cnt) {
write_lock(&et->lock)
__free_extent_tree
write_unlock(&et->lock)
- __writeback_single_inode
- f2fs_outplace_write_data
- f2fs_update_read_extent_cache
- __update_extent_tree_range
// FI_NO_EXTENT not set,
// insert new extent node
} // node_cnt == 0, exit while
- f2fs_bug_on(node_cnt) // node_cnt > 0
Additionally, __update_extent_tree_range() only checks FI_NO_EXTENT for
EX_READ type, leaving EX_BLOCK_AGE updates completely unprotected.
This patch set FI_NO_EXTENT under et->lock in __destroy_extent_node(),
consistent with other callers (__update_extent_tree_range and
__drop_extent_tree) and check FI_NO_EXTENT for both EX_READ and
EX_BLOCK_AGE tree.
Fixes: 3fc5d5a182f6 ("f2fs: fix to shrink read extent node in batches")
Cc: stable@vger.kernel.org
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb2ca3ca983551a80e16a4a25df5a4ce59df8484 upstream.
When f2fs_map_blocks()->f2fs_map_blocks_cached() hits the read extent
cache, map->m_multidev_dio is not updated, which leads to incorrect
multidevice information being reported by trace_f2fs_map_blocks().
This patch updates map->m_multidev_dio in f2fs_map_blocks_cached() when
the read extent cache is hit.
Cc: stable@kernel.org
Fixes: 0094e98bd147 ("f2fs: factor a f2fs_map_blocks_cached helper")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 95e159ad3e52f7478cfd22e44ec37c9f334f8993 upstream.
f2fs_fiemap() calls f2fs_map_blocks() to obtain the block mapping a
file, and then merges contiguous mappings into extents. If the mapping
is found in the read extent cache, node blocks do not need to be read.
However, in the following scenario, a contiguous extent can be split
into two extents:
$ dd if=/dev/zero of=data.128M bs=1M count=128
$ losetup -f data.128M
$ mkfs.f2fs /dev/loop0 -f
$ mount -o mode=lfs /dev/loop0 /mnt/f2fs/
$ cd /mnt/f2fs/
$ dd if=/dev/zero of=data.72M bs=1M count=72 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=4 && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=2 conv=notrunc && sync
$ echo 3 > /proc/sys/vm/drop_caches
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ dd if=/dev/zero of=data.4M bs=1M count=2 seek=0 conv=notrunc && sync
$ f2fs_io fiemap 0 1024 data.4M
Fiemap: offset = 0 len = 1024
logical addr. physical addr. length flags
0 0000000000000000 0000000006400000 0000000000200000 00001000
1 0000000000200000 0000000006600000 0000000000200000 00001001
Although the physical addresses of the ranges 0～2MB and 2M～4MB are
contiguous, the mapping for the 2M～4MB range is not present in memory.
When the physical addresses for the 0～2MB range are updated, no merge
happens because the adjacent mapping is missing from the in-memory
cache. As a result, fiemap reports two separate extents instead of a
single contiguous one.
The root cause is that the read extent cache does not guarantee that all
blocks of an extent are present in memory. Therefore, when the extent
length returned by f2fs_map_blocks_cached() is smaller than maxblocks,
the remaining mappings are retrieved via f2fs_get_dnode_of_data() to
ensure correct fiemap extent boundary handling.
Cc: stable@kernel.org
Fixes: cd8fc5226bef ("f2fs: remove the create argument to f2fs_map_blocks")
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5471834a96fb697874be2ca0b052e74bcf3c23d1 upstream.
f2fs_update_inode() reads inode->i_blocks without holding i_lock to
serialize it to the on-disk inode, while concurrent truncate or
allocation paths may modify i_blocks under i_lock. Since blkcnt_t is
u64, this risks torn reads on 32-bit architectures.
Following the approach in ext4_inode_blocks_set(), add READ_ONCE() to prevent
potential compiler-induced tearing.
Fixes: 19f99cee206c ("f2fs: add core inode operations")
Cc: stable@vger.kernel.org
Signed-off-by: Cen Zhang <zzzccc427@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5c52908d52c6c8eb8933264aa6087a0600fd892 upstream.
Using lock_sock_fast() (atomic context) around sock_set_timestamp()
and sock_set_timestamping() is unsafe, as both helpers can sleep.
Replace lock_sock_fast() with sleepable lock_sock()/release_sock()
to avoid scheduling while atomic panic.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260420093343.16443-1-gang.yan@linux.dev
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-2-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5f95c21fc23a7ef22b4d27d1ed9bb55557ffb926 upstream.
Both mptcp_setsockopt_sol_socket_tstamp() and
mptcp_setsockopt_sol_socket_timestamping() iterate over subflows,
acquire the subflow socket lock, but then erroneously pass the MPTCP
msk socket to sock_set_timestamp() / sock_set_timestamping() instead
of the subflow ssk. As a result, the timestamp flags are set on the
wrong socket and have no effect on the actual subflows.
Pass ssk instead of sk to both helpers.
Fixes: 9061f24bf82e ("mptcp: sockopt: propagate timestamp request to subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-1-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6da02d4c00fdda2417e42ad2b762a9209e6cc49 upstream.
When HMAC validation fails on a received ACK + MP_JOIN in
subflow_syn_recv_sock(), the subflow is reset with reason
MPTCP_RST_EPROHIBIT ("Administratively prohibited"). This is
incorrect: HMAC validation failure is an MPTCP protocol-level
error, not an administrative policy denial.
The mirror site on the client, in subflow_finish_connect(), already
uses MPTCP_RST_EMPTCP ("MPTCP-specific error") for the same kind of
HMAC failure on the SYN/ACK + MP_JOIN. Use the same reason on the
server side for symmetry and accuracy.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Fixes: 443041deb5ef ("mptcp: fix NULL pointer in can_accept_new_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-2-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c4a99a921949cddc590b22bb14eeb23dffcc3ba6 upstream.
In subflow_finish_connect(), HMAC validation of the server's HMAC
in SYN/ACK + MP_JOIN increments MPTCP_MIB_JOINACKMAC ("HMAC was
wrong on ACK + MP_JOIN") on failure. The function processes the
SYN/ACK, not the ACK; the matching MPTCP_MIB_JOINSYNACKMAC counter
("HMAC was wrong on SYN/ACK + MP_JOIN") exists but is not
incremented anywhere in the tree.
The mirror site on the server, subflow_syn_recv_sock(), already
uses JOINACKMAC correctly for ACK HMAC failure. Use JOINSYNACKMAC
at the SYN/ACK validation site so each counter reflects the packet
whose HMAC actually failed.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Fixes: fc518953bc9c ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260501-net-mptcp-misc-fixes-7-1-rc3-v1-1-b70118df778e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f14d6e9c3678a067f304abba561e0c5446c7e845 upstream.
The SO_LINGER socket option has been supported for a while with MPTCP
sockets [1], but it didn't cause the equivalent of a TCP reset as
expected when enabled and its time was set to 0. This was causing some
behavioural differences with TCP where some connections were not
promptly stopped as expected.
To fix that, an extra condition is checked at close() time before
sending an MP_FASTCLOSE, the MPTCP equivalent of a TCP reset.
Note that backporting up to [1] will be difficult as more changes are
needed to be able to send MP_FASTCLOSE. It seems better to stop at [2],
which was supposed to already imitate TCP.
Validated with MPTCP packetdrill tests [3].
Fixes: 268b12387460 ("mptcp: setsockopt: support SO_LINGER") [1]
Fixes: d21f83485518 ("mptcp: use fastclose on more edge scenarios") [2]
Cc: stable@vger.kernel.org
Reported-by: Lance Tuller <lance@lance0.com>
Closes: https://github.com/lance0/xfr/pull/67
Link: https://github.com/multipath-tcp/packetdrill/pull/196 [3]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260427-net-mptcp-misc-fixes-7-1-rc2-v1-3-7432b7f279fa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 53705ddfa18408f8e1f064331b6387509fa19f7f upstream.
When pm_netlink.sh is executed with '-i', 'ip mptcp' is used instead of
'pm_nl_ctl'. IPRoute2 doesn't support the 'unknown' flag, which has only
been added to 'pm_nl_ctl' for this specific check: to ensure that the
kernel ignores such unsupported flag.
No reason to add this flag to 'ip mptcp'. Then, this check should be
skipped when 'ip mptcp' is used.
Fixes: 0cef6fcac24d ("selftests: mptcp: ip_mptcp option for more scripts")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-11-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65db7b27b90e2ea8d4966935aa9a50b6a60c31ac upstream.
Using '${?}' inside the if-statement to check the returned value from
the command that was evaluated as part of the if-statement is not
correct: here, '${?}' will be linked to the previous instruction, not
the one that is expected here (${cmd}).
Instead, simply mark the error, except if an error is expected. If
that's the case, 1 can be passed as the 4th argument of this helper.
Three checks from pm_netlink.sh expect an error.
While at it, improve the error message when the command unexpectedly
fails or succeeds.
Note that we could expect a specific returned value, but the checks
currently expecting an error can be used with 'ip mptcp' or 'pm_nl_ctl',
and these two tools don't return the same error code.
Fixes: 2d0c1d27ea4e ("selftests: mptcp: add mptcp_lib_check_output helper")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260505-net-mptcp-pm-fixes-7-1-rc3-v1-10-fca8091060a4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
