| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f4c50a4034e62ab75f1d5cdd191dd5f9c77fdff4 upstream.
MSG_SPLICE_PAGES can attach pages from a pipe directly to an skb. TCP
marks such skbs with SKBFL_SHARED_FRAG after skb_splice_from_iter(),
so later paths that may modify packet data can first make a private
copy. The IPv4/IPv6 datagram append paths did not set this flag when
splicing pages into UDP skbs.
That leaves an ESP-in-UDP packet made from shared pipe pages looking
like an ordinary uncloned nonlinear skb. ESP input then takes the no-COW
fast path for uncloned skbs without a frag_list and decrypts in place
over data that is not owned privately by the skb.
Mark IPv4/IPv6 datagram splice frags with SKBFL_SHARED_FRAG, matching
TCP. Also make ESP input fall back to skb_cow_data() when the flag is
present, so ESP does not decrypt externally backed frags in place.
Private nonlinear skb frags still use the existing fast path.
This intentionally does not change ESP output. In esp_output_head(),
the path that appends the ESP trailer to existing skb tailroom without
calling skb_cow_data() is not reachable for nonlinear skbs:
skb_tailroom() returns zero when skb->data_len is nonzero, while ESP
tailen is positive. Thus ESP output will either use the separate
destination-frag path or fall back to skb_cow_data().
Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible")
Fixes: 7da0dde68486 ("ip, udp: Support MSG_SPLICE_PAGES")
Fixes: 6d8192bd69bb ("ip6, udp6: Support MSG_SPLICE_PAGES")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Reported-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Tested-by: Hyunwoo Kim <imv4bel@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kuan-Ting Chen <h3xrabbit@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20260504135130.169210693@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe11e5c40817b84abaa5d83bfb6586d8412bfd07 upstream.
Reject zero shift operands for nft_bitwise left and right shift
expressions during initialization.
The carry propagation logic computes the carry from the adjacent 32-bit
word using BITS_PER_TYPE(u32) - shift. A zero shift operand turns this
into a 32-bit shift, which is undefined behaviour.
Reject zero shift operands in the control plane, alongside the existing
check for values greater than or equal to 32, so malformed rules never
reach the packet path.
Fixes: 567d746b55bc ("netfilter: bitwise: add support for shifts.")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Kai Ma <k4729.23098@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f9c52a6ba9780bd27e0bf4c044fd91c13c778b6e upstream.
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst.
Fixes: af4a2209b134 ("ipv6: sr: use dst_cache in seg6_input")
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260421094735.20997-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a5f1cd22d47f8ca4b760b6334378ae42c1bd24b upstream.
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new().
Fixes: 80bb50e2d459 ("ALSA: caiaq: take a reference on the USB device in create_card()")
Reported-by: syzbot+2afd7e71155c7e241560@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2afd7e71155c7e241560
Tested-by: syzbot+2afd7e71155c7e241560@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260426001934.70813-1-kartikey406@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 095a8b0ad3c3b5cdc3850d961adb8a8f735220bb upstream.
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Link: https://lore.kernel.org/all/bug-221376-2300@https.bugzilla.kernel.org%2F/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221376
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
Assisted-by: GitHub Copilot:Claude Sonnet 4.6 linux-kernel-oops-x86.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9e6bf146b55999a095bb14f73a843942456d1adc upstream.
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards.
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Cc: stable <stable@kernel.org>
Reported-by: Anthropic
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042133-gout-unvented-1bd9@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55b2984c96c37f909bbfe8851f13152693951382 upstream.
Fix rxrpc_input_call_event() to only unshare DATA packets and not ACK,
ABORT, etc..
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer.
Fixes: 1f2740150f90 ("rxrpc: Fix potential UAF after skb_unshare() failure")
Closes: https://sashiko.dev/#/patchset/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260423200909.3049438-2-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b32ae47a2b0a1fb4bd4942242847966d9b178222 upstream.
The previous fix to handle the error from setup_card() caused a
regression for the models that have no dedicated input device;
snd_usb_caiaq_input_init() just returns -EINVAL, and we treat it as a
fatal error although it should be ignored.
As a regression fix, change the error code to -ENODEV, and ignore this
error in the callee, to continue probing.
Fixes: 28abd224db4a ("ALSA: caiaq: Handle probe errors properly")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221423
Link: https://patch.msgid.link/20260427145642.6637-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a7b5221b5b51cc798fcfc3be00d02eade149d69 upstream.
The previous fix for handling the error from setup_card() missed that
an internal URB cdev->ep1_in_urb might have been already submitted
beforehand. In the normal case, this URB gets killed at the
disconnection, but in the error path, we didn't do it, hence there can
be a potential leak.
Fix it in the error path for setup_card(), too.
Fixes: 28abd224db4a ("ALSA: caiaq: Handle probe errors properly")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260427123819.890185-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b484311507b5d403c1f7a45f6aa3778549e268b upstream.
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2884bf72fb8f03409e423397319205de48adca16 upstream.
bond_xmit_broadcast() reuses the original skb for the last slave
(determined by bond_is_last_slave()) and clones it for others.
Concurrent slave enslave/release can mutate the slave list during
RCU-protected iteration, changing which slave is "last" mid-loop.
This causes the original skb to be double-consumed (double-freed).
Replace the racy bond_is_last_slave() check with a simple index
comparison (i + 1 == slaves_count) against the pre-snapshot slave
count taken via READ_ONCE() before the loop. This preserves the
zero-copy optimization for the last slave while making the "last"
determination stable against concurrent list mutations.
The UAF can trigger the following crash:
==================================================================
BUG: KASAN: slab-use-after-free in skb_clone
Read of size 8 at addr ffff888100ef8d40 by task exploit/147
CPU: 1 UID: 0 PID: 147 Comm: exploit Not tainted 7.0.0-rc3+ #4 PREEMPTLAZY
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:597)
skb_clone (include/linux/skbuff.h:1724 include/linux/skbuff.h:1792 include/linux/skbuff.h:3396 net/core/skbuff.c:2108)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5334)
bond_start_xmit (drivers/net/bonding/bond_main.c:5567 drivers/net/bonding/bond_main.c:5593)
dev_hard_start_xmit (include/linux/netdevice.h:5325 include/linux/netdevice.h:5334 net/core/dev.c:3871 net/core/dev.c:3887)
__dev_queue_xmit (include/linux/netdevice.h:3601 net/core/dev.c:4838)
ip6_finish_output2 (include/net/neighbour.h:540 include/net/neighbour.h:554 net/ipv6/ip6_output.c:136)
ip6_finish_output (net/ipv6/ip6_output.c:208 net/ipv6/ip6_output.c:219)
ip6_output (net/ipv6/ip6_output.c:250)
ip6_send_skb (net/ipv6/ip6_output.c:1985)
udp_v6_send_skb (net/ipv6/udp.c:1442)
udpv6_sendmsg (net/ipv6/udp.c:1733)
__sys_sendto (net/socket.c:730 net/socket.c:742 net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Allocated by task 147:
Freed by task 147:
The buggy address belongs to the object at ffff888100ef8c80
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 192 bytes inside of
freed 224-byte region [ffff888100ef8c80, ffff888100ef8d60)
Memory state around the buggy address:
ffff888100ef8c00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888100ef8c80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100ef8d00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888100ef8d80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
ffff888100ef8e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 4e5bd03ae346 ("net: bonding: fix bond_xmit_broadcast return value error bug")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260326075553.3960562-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kevin Berry <kpberry@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5db6ef9847717329f12c5ea8aba7e9f588a980c0 upstream.
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize.
Fixes: f15f05b0a5de ("crypto: ccm - switch to separate cbcmac driver")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuhang Zheng <z1652074432@gmail.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Yucheng Lu <kanolyc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d239462787b072c78eb19fc1f155c3d411256282 ]
Droppable mappings must not be lockable. There is a check for VMAs with
VM_DROPPABLE set in mlock_fixup() along with checks for other types of
unlockable VMAs which ensures this when calling mlock()/mlock2().
For mlockall(MCL_FUTURE), the check for unlockable VMAs is different. In
apply_mlockall_flags(), if the flags parameter has MCL_FUTURE set, the
current task's mm's default VMA flag field mm->def_flags has VM_LOCKED
applied to it. VM_LOCKONFAULT is also applied if MCL_ONFAULT is also set.
When these flags are set as default in this manner they are cleared in
__mmap_complete() for new mappings that do not support mlock. A check for
VM_DROPPABLE in __mmap_complete() is missing resulting in droppable
mappings created with VM_LOCKED set. To fix this and reduce that chance
of similar bugs in the future, introduce and use vma_supports_mlock().
Link: https://lkml.kernel.org/r/20260310155821.17869-1-anthony.yznaga@oracle.com
Fixes: 9651fcedf7b9 ("mm: add MAP_DROPPABLE for designating always lazily freeable mappings")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Suggested-by: David Hildenbrand <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Tested-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ adapted change to `mm/mmap.c::__mmap_region()` instead of `mm/vma.c::__mmap_complete()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit db357034f7e0cf23f233f414a8508312dfe8fbbe ]
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup().
Fixes: c7299fea6769 ("spi: Fix spi device unregister flow")
Cc: stable@vger.kernel.org # 5.13
Cc: Saravana Kannan <saravanak@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260410154907.129248-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 27d5e84e810b0849d08b9aec68e48570461ce313 ]
Currently, the nameserver doesn't limit the number of nodes it handles.
This can be an attack vector if a malicious client starts registering
random nodes, leading to memory exhaustion.
Hence, limit the maximum number of nodes to 64. Note that, limit of 64 is
chosen based on the current platform requirements. If requirement changes
in the future, this limit can be increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-4-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ dropped comment/define changes for missing QRTR_NS_MAX_SERVERS/LOOKUPS prereqs and kept plain kzalloc instead of kzalloc_obj ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a663bac71a2f0b3ac6c373168ca57b2a6e6381aa ]
>From the MCTP Base specification (DSP0236 v1.2.1), the first byte of
the MCTP header contains a 4 bit reserved field, and 4 bit version.
On our current receive path, we require those 4 reserved bits to be
zero, but the 9500-8i card is non-conformant, and may set these
reserved bits.
DSP0236 states that the reserved bits must be written as zero, and
ignored when read. While the device might not conform to the former,
we should accept these message to conform to the latter.
Relax our check on the MCTP version byte to allow non-zero bits in the
reserved field.
Fixes: 889b7da23abf ("mctp: Add initial routing framework")
Signed-off-by: Yuan Zhaoming <yuanzm2@lenovo.com>
Cc: stable@vger.kernel.org
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260417141340.5306-1-yuanzhaoming901030@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit df4601653201de21b487c3e7fffd464790cab808 ]
Local FDB entries can be rewritten in place by `fdb_delete_local()`, which
updates `f->dst` to another port or to `NULL` while keeping the entry
alive. Several bridge RCU readers inspect `f->dst`, including
`br_fdb_fillbuf()` through the `brforward_read()` sysfs path.
These readers currently load `f->dst` multiple times and can therefore
observe inconsistent values across the check and later dereference.
In `br_fdb_fillbuf()`, this means a concurrent local-FDB update can change
`f->dst` after the NULL check and before the `port_no` dereference,
leading to a NULL-ptr-deref.
Fix this by taking a single `READ_ONCE()` snapshot of `f->dst` in each
affected RCU reader and using that snapshot for the rest of the access
sequence. Also publish the in-place `f->dst` updates in `fdb_delete_local()`
with `WRITE_ONCE()` so the readers and writer use matching access patterns.
Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address")
Cc: stable@kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[ kept `*idx < cb->args[2]` instead of `*idx < ctx->fdb_idx` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5640227d9a21c6a8be249a10677b832e7f40dc55 ]
Current code does no bound checking on the number of lookups a client can
perform. Though the code restricts the lookups to local clients, there is
still a possibility of a malicious local client sending a flood of
NEW_LOOKUP messages over the same socket.
Fix this issue by limiting the maximum number of lookups to 64 globally.
Since the nameserver allows only atmost one local observer, this global
lookup count will ensure that the lookups stay within the limit.
Note that, limit of 64 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-2-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adapted comment block to only mention QRTR_NS_MAX_LOOKUPS and kept kzalloc() instead of kzalloc_obj() due to missing prerequisite commits ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d5ee2ff98322337951c56398e79d51815acbf955 ]
Current code does no bound checking on the number of servers added per
node. A malicious client can flood NEW_SERVER messages and exhaust memory.
Fix this issue by limiting the maximum number of server registrations to
256 per node. If the NEW_SERVER message is received for an old port, then
don't restrict it as it will get replaced. While at it, also rate limit
the error messages in the failure path of qrtr_ns_worker().
Note that the limit of 256 is chosen based on the current platform
requirements. If requirement changes in the future, this limit can be
increased.
Cc: stable@vger.kernel.org
Fixes: 0c2204a4ad71 ("net: qrtr: Migrate nameservice to kernel from userspace")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-qrtr-fix-v3-1-00a8a5ff2b51@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1f2740150f904bfa60e4bad74d65add3ccb5e7f8 ]
If skb_unshare() fails to unshare a packet due to allocation failure in
rxrpc_input_packet(), the skb pointer in the parent (rxrpc_io_thread())
will be NULL'd out. This will likely cause the call to
trace_rxrpc_rx_done() to oops.
Fix this by moving the unsharing down to where rxrpc_input_call_event()
calls rxrpc_input_call_packet(). There are a number of places prior to
that where we ignore DATA packets for a variety of reasons (such as the
call already being complete) for which an unshare is then avoided.
And with that, rxrpc_input_packet() doesn't need to take a pointer to the
pointer to the packet, so change that to just a pointer.
Fixes: 2d1faf7a0ca3 ("rxrpc: Simplify skbuff accounting in receive path")
Closes: https://sashiko.dev/#/patchset/20260408121252.2249051-1-dhowells%40redhat.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jeffrey Altman <jaltman@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/20260422161438.2593376-4-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ adapted to per-skb rxrpc_input_call_event() signature ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit aac0a51b16700b403a55b67ba495de021db78763 ]
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport.
Fixes: da35a7b526d9 ("iio: frequency: admv1013: add support for ADMV1013")
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e61b5bb0e91390adee41eaddc0a1a7d55d5652b2 ]
Introduce a local struct device pointer in functions that reference
&spi->dev for device-managed resource calls and device property reads,
improving code readability.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: aac0a51b1670 ("iio: frequency: admv1013: fix NULL pointer dereference on str")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 41c665aae2b5dbecddddcc8ace344caf630cc7a4 ]
bio_add_page() and bio_integrity_add_page() reject pages from different
dev_pagemaps entirely, returning 0 even when those pages have compatible
DMA mapping requirements. This forces callers to start a new bio when
buffers span pgmap boundaries, even though the pages could safely coexist
as separate bvec entries.
This matters for guests where memory is registered through
devm_memremap_pages() with MEMORY_DEVICE_GENERIC in multiple calls,
creating separate dev_pagemaps for each chunk. When a direct I/O buffer
spans two such chunks, bio_add_page() rejects the second page, forcing an
unnecessary bio split or I/O failure.
Introduce zone_device_pages_compatible() in blk.h to check whether two
pages can coexist in the same bio as separate bvec entries. The block DMA
iterator (blk_dma_map_iter_start) caches the P2PDMA mapping state from the
first segment and applies it to all others, so P2PDMA pages from different
pgmaps must not be mixed, and neither must P2PDMA and non-P2PDMA pages.
All other combinations (MEMORY_DEVICE_GENERIC pages from different pgmaps,
or MEMORY_DEVICE_GENERIC with normal RAM) use the same dma_map_phys path
and are safe.
Replace the blanket zone_device_pages_have_same_pgmap() rejection with
zone_device_pages_compatible(), while keeping
zone_device_pages_have_same_pgmap() as a merge guard.
Pages from different pgmaps can be added as separate bvec entries but
must not be coalesced into the same segment, as that would make
it impossible to recover the correct pgmap via page_pgmap().
Fixes: 49580e690755 ("block: add check when merging zone device pages")
Cc: stable@vger.kernel.org
Signed-off-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260410153414.4159050-3-namjain@linux.microsoft.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[ restructured combined `if` into explicit `bv` block ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dbeb256e8dd87233d891b170c0b32a6466467036 ]
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function.
Fixes: 0266a177631d ("RDMA/mana_ib: Add a driver for Microsoft Azure Network Adapter")
Cc: stable@vger.kernel.org
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://patch.msgid.link/20260325194100.1929056-1-longli@microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
[ kept early-return error handling and used unquoted NET_MANA namespace in EXPORT_SYMBOL_NS ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit eac69475b01fe1e861dfe3960b57fa95671c132e ]
In a control request, the USB request structure
can be subject to DMA on some HCs. Hence it must obey
the rules for DMA coherency. Allocate it separately.
Fixes: b1c97193c6437 ("[media] rc: port IgorPlug-USB to rc-core")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ replaced kzalloc_obj(*ir->request, GFP_KERNEL) with kzalloc(sizeof(*ir->request), GFP_KERNEL) ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fd7df93013c5118812e63a52635dc6c3a805a1de ]
In i2sbus_resume(), skip devices with an empty codec list, which avoids
using an uninitialized 'sysclock_factor' in the 32-bit format path in
i2sbus_pcm_prepare().
In i2sbus_pcm_prepare(), replace two list_for_each_entry() loops with a
single list_first_entry() now that the codec list is guaranteed to be
non-empty by all callers.
Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260310102921.210109-3-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 50acaad3d202c064779db8dc3d010007347f59c7 ]
Buffers must not share a cache line with other data structures.
Allocate separately.
Fixes: 0938069fa0897 ("[media] rc: Add support for the TechnoTrend USB IR Receiver")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[ kept kzalloc(sizeof(*tt), GFP_KERNEL) instead of kzalloc_obj() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4fb61d95ad21c3b6f1c09f357ff49d70abb0535e ]
zs_page_migrate() uses copy_page() to copy the contents of a zspage page
during migration. However, copy_page() is not instrumented by KMSAN, so
the shadow and origin metadata of the destination page are not updated.
As a result, subsequent accesses to the migrated page are reported as
use-after-free by KMSAN, despite the data being correctly copied.
Add a kmsan_copy_page_meta() call after copy_page() to propagate the KMSAN
metadata to the new page, matching what copy_highpage() does internally.
Link: https://lkml.kernel.org/r/20260321132912.93434-1-syoshida@redhat.com
Fixes: afb2d666d025 ("zsmalloc: use copy_page for full page copy")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ translated zpdesc_page(newzpdesc/zpdesc) arguments to newpage/page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5ed060d5491597490fb53ec69da3edc4b1e8c165 ]
The i2sbus PCM code uses pi->active to constrain the sibling stream to
an already prepared duplex format and rate in i2sbus_pcm_open().
That state is set from i2sbus_pcm_prepare(), but the current code only
clears it on close. As a result, the sibling stream can inherit stale
constraints after the prepared state has been torn down.
Clear pi->active when hw_params() or hw_free() tears down the prepared
state, and set it again only after prepare succeeds.
Replace the stale FIXME in the duplex constraint comment with a description
of the current driver behavior: i2sbus still programs a single shared
transport configuration for both directions, so mixed formats are not
supported in duplex mode.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604010125.AvkWBYKI-lkp@intel.com/
Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260331-aoa-i2sbus-clear-stale-active-v2-1-3764ae2889a1@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1cb6ecbb372002ef9e531c5377e5f60122411e40 ]
Replace the manual mutex lock/unlock pairs with guard() for code
simplification.
Only code refactoring, and no behavior change.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250829151335.7342-14-tiwai@suse.de
Stable-dep-of: 5ed060d54915 ("ALSA: aoa: i2sbus: clear stale prepared state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2e0c0668a3486f96b86c50e02872c8e94fd4f9c ]
During folio migration, __folio_migrate_mapping() removes the source folio
from the deferred split queue, but the destination folio is never
re-queued. This causes underutilized THPs to escape the shrinker after
NUMA migration, since they silently drop off the deferred split list.
Fix this by recording whether the source folio was on the deferred split
queue and its partially mapped state before move_to_new_folio() unqueues
it, and re-queuing the destination folio after a successful migration if
it was.
By the time migrate_folio_move() runs, partially mapped folios without a
pin have already been split by migrate_pages_batch(). So only two cases
remain on the deferred list at this point:
1. Partially mapped folios with a pin (split failed).
2. Fully mapped but potentially underused folios. The recorded
partially_mapped state is forwarded to deferred_split_folio() so that
the destination folio is correctly re-queued in both cases.
Because THPs are removed from the deferred_list, THP shinker cannot
split the underutilized THPs in time. As a result, users will show
less free memory than before.
Link: https://lkml.kernel.org/r/20260312104723.1351321-1-usama.arif@linux.dev
Fixes: dafff3f4c850 ("mm: split underused THPs")
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be4a3e9c185264e9ad0fe02c1c5d81b8386bd50c ]
Let's move that handling directly into migrate_folio_move(), so we can
simplify move_to_new_folio(). While at it, fixup the documentation a bit.
Note that unmap_and_move_huge_page() does not care, because it only deals
with actual folios. (we only support migration of individual movable_ops
pages)
Link: https://lkml.kernel.org/r/20250704102524.326966-12-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: a2e0c0668a34 ("mm: migrate: requeue destination folio on deferred split queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b9ed00483d4cbacca04edb11984d8daf09e9ae22 ]
Let's factor it out, simplifying the calling code.
Before this change, we would have called flush_dcache_folio() also on
movable_ops pages. As documented in Documentation/core-api/cachetlb.rst:
"This routine need only be called for page cache pages which can
potentially ever be mapped into the address space of a user
process."
So don't do it for movable_ops pages. If there would ever be such a
movable_ops page user, it should do the flushing itself after performing
the copy.
Note that we can now change folio_mapping_flags() to folio_test_anon() to
make it clearer, because movable_ops pages will never take that path.
[akpm@linux-foundation.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/20250704102524.326966-10-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pé rez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: a2e0c0668a34 ("mm: migrate: requeue destination folio on deferred split queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae5e95d4157481693be2317e3ffcd84e36010cbb ]
The mwifiex_adapter_cleanup() function uses timer_delete()
(non-synchronous) for the wakeup_timer before the adapter structure is
freed. This is incorrect because timer_delete() does not wait for any
running timer callback to complete.
If the wakeup_timer callback (wakeup_timer_fn) is executing when
mwifiex_adapter_cleanup() is called, the callback will continue to
access adapter fields (adapter->hw_status, adapter->if_ops.card_reset,
etc.) which may be freed by mwifiex_free_adapter() called later in the
mwifiex_remove_card() path.
Use timer_delete_sync() instead to ensure any running timer callback has
completed before returning.
Fixes: 4636187da60b ("mwifiex: add wakeup timer based recovery mechanism")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206194401.2346-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ changed `timer_delete_sync()` to `del_timer_sync()` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56154fef47d104effa9f29ed3db4f805cbc0d640 ]
mt7925u uses different reset/status registers from mt7921u. Reusing the
mt7921u register set causes the WFSYS reset to fail.
Add a chip-specific descriptor in mt792xu_wfsys_reset() to select the
correct registers and fix mt7925u failing to initialize after a warm
reboot.
Fixes: d28e1a48952e ("wifi: mt76: mt792x: introduce mt792x-usb module")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6f48512c1ceebcd1ce6bb83df3b3d56a261507d ]
Prepare mt792xu_wfsys_reset() for chips that share the same USB WFSYS
reset flow but use different register definitions.
This is a pure refactor of the current mt7921u path and keeps the reset
sequence unchanged.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260311002825.15502-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stable-dep-of: 56154fef47d1 ("wifi: mt76: mt792x: fix mt7925u USB WFSYS reset handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 41ff66baf81c6541f4f985dd7eac4494d03d9440 ]
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration.
Fixes: e33df1d2f3a0 ("thermal: let governors have private data for each thermal zone")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5092923.31r3eYUQgx@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit def036ef87f8641c1c525d5ae17438d7a1006491 ]
rcount is intended to be connection-specific: 2 for curr_conn, 1 for
every other connection sharing the same session. However, it is
initialised only once before the hash iteration and is never reset.
After the loop visits curr_conn, later sibling connections are also
checked against rcount == 2, so a sibling with req_running == 1 is
incorrectly treated as idle. This makes the outcome depend on the
hash iteration order: whether a given sibling is checked against the
loose (< 2) or the strict (< 1) threshold is decided by whether it
happens to be visited before or after curr_conn.
The function's contract is "wait until every connection sharing this
session is idle" so that destroy_previous_session() can safely tear
the session down. The latched rcount violates that contract and
reopens the teardown race window the wait logic was meant to close:
destroy_previous_session() may proceed before sibling channels have
actually quiesced, overlapping session teardown with in-flight work
on those connections.
Recompute rcount inside the loop so each connection is compared
against its own threshold regardless of iteration order.
This is a code-inspection fix for an iteration-order-dependent logic
error; a targeted reproducer would require SMB3 multichannel with
in-flight work on a sibling channel landing after curr_conn in hash
order, which is not something that can be triggered reliably.
Fixes: 76e98a158b20 ("ksmbd: fix race condition between destroy_previous_session() and smb2 operations()")
Cc: stable@vger.kernel.org
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0bcc831be535269556f59cb70396f7e34f03a276 ]
Replace connection list with hash table to improve lookup performance.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: def036ef87f8 ("ksmbd: reset rcount per connection in ksmbd_conn_wait_idle_sess_id()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f75f8bdd4ff4830abe31a1b94892eb12b85b9535 ]
use msleep instaed of schedule_timeout_interruptible()
to guarantee the task delays as expected.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: def036ef87f8 ("ksmbd: reset rcount per connection in ksmbd_conn_wait_idle_sess_id()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6af249c996f7d73a3435f9e577956fa259347d18 ]
Syzbot reported a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:1900!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6527 Comm: syz.5.110 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:f2fs_issue_discard_timeout+0x59b/0x5a0 fs/f2fs/segment.c:1900
Code: d9 80 e1 07 80 c1 03 38 c1 0f 8c d6 fe ff ff 48 89 df e8 a8 5e fa fd e9 c9 fe ff ff e8 4e 46 94 fd 90 0f 0b e8 46 46 94 fd 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc9000494f940 EFLAGS: 00010283
RAX: ffffffff843009ca RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc9001ca78000 RSI: 00000000000029f3 RDI: 00000000000029f4
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: dffffc0000000000 R11: ffffed100893a431 R12: 1ffff1100893a430
R13: 1ffff1100c2b702c R14: dffffc0000000000 R15: ffff8880449d2160
FS: 00007ffa35fed6c0(0000) GS:ffff88812643d000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2b68634000 CR3: 0000000039f62000 CR4: 00000000003526f0
Call Trace:
<TASK>
__f2fs_remount fs/f2fs/super.c:2960 [inline]
f2fs_reconfigure+0x108a/0x1710 fs/f2fs/super.c:5443
reconfigure_super+0x227/0x8a0 fs/super.c:1080
do_remount fs/namespace.c:3391 [inline]
path_mount+0xdc5/0x10e0 fs/namespace.c:4151
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x31d/0x420 fs/namespace.c:4338
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffa37dbda0a
The root cause is there will be race condition in between f2fs_ioc_fitrim()
and f2fs_remount():
- f2fs_remount - f2fs_ioc_fitrim
- f2fs_issue_discard_timeout
- __issue_discard_cmd
- __drop_discard_cmd
- __wait_all_discard_cmd
- f2fs_trim_fs
- f2fs_write_checkpoint
- f2fs_clear_prefree_segments
- f2fs_issue_discard
- __issue_discard_async
- __queue_discard_cmd
- __update_discard_tree_range
- __insert_discard_cmd
- __create_discard_cmd
: atomic_inc(&dcc->discard_cmd_cnt);
- sanity check on dcc->discard_cmd_cnt (expect discard_cmd_cnt to be zero)
This will only happen when fitrim races w/ remount rw, if we remount to
readonly filesystem, remount will wait until mnt_pcp.mnt_writers to zero,
that means fitrim is not in process at that time.
Cc: stable@kernel.org
Fixes: 2482c4325dfe ("f2fs: detect bug_on in f2fs_wait_discard_bios")
Reported-by: syzbot+62538b67389ee582837a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/69b07d7c.050a0220.8df7.09a1.GAE@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ dereferenced flags pointer (`*flags & SB_RDONLY`) to match `int *flags` remount signature ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 744dd97752ef1076a8d8672bb0d8aa2c7abc1144 ]
Patch series "Minor hmm_test fixes and cleanups".
Two bugfixes a cleanup for the HMM kernel selftests. These were mostly
reported by Zenghui Yu with special thanks to Lorenzo for analysing and
pointing out the problems.
This patch (of 3):
When dmirror_fops_release() is called it frees the dmirror struct but
doesn't migrate device private pages back to system memory first. This
leaves those pages with a dangling zone_device_data pointer to the freed
dmirror.
If a subsequent fault occurs on those pages (eg. during coredump) the
dmirror_devmem_fault() callback dereferences the stale pointer causing a
kernel panic. This was reported [1] when running mm/ksft_hmm.sh on arm64,
where a test failure triggered SIGABRT and the resulting coredump walked
the VMAs faulting in the stale device private pages.
Fix this by calling dmirror_device_evict_chunk() for each devmem chunk in
dmirror_fops_release() to migrate all device private pages back to system
memory before freeing the dmirror struct. The function is moved earlier
in the file to avoid a forward declaration.
Link: https://lore.kernel.org/20260331063445.3551404-1-apopple@nvidia.com
Link: https://lore.kernel.org/20260331063445.3551404-2-apopple@nvidia.com
Fixes: b2ef9f5a5cb3 ("mm/hmm/test: add selftest driver for HMM")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reported-by: Zenghui Yu <zenghui.yu@linux.dev>
Closes: https://lore.kernel.org/linux-mm/8bd0396a-8997-4d2e-a13f-5aac033083d7@linux.dev/
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zenghui Yu <zenghui.yu@linux.dev>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ kept the existing simpler `dmirror_device_evict_chunk()` body instead of the upstream compound-folio version ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2d9c4a4ed4eef1f82c5b16b037aee8bad819fd53 ]
The xfstests case "generic/107" and syzbot have both reported a NULL
pointer dereference.
The concurrent scenario that triggers the panic is as follows:
F2FS_WB_CP_DATA write callback umount
- f2fs_write_checkpoint
- f2fs_wait_on_all_pages(sbi, F2FS_WB_CP_DATA)
- blk_mq_end_request
- bio_endio
- f2fs_write_end_io
: dec_page_count(sbi, F2FS_WB_CP_DATA)
: wake_up(&sbi->cp_wait)
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: iput(sbi->node_inode)
: sbi->node_inode = NULL
: f2fs_in_warm_node_list
- is_node_folio // sbi->node_inode is NULL and panic
The root cause is that f2fs_put_super() calls iput(sbi->node_inode) and
sets sbi->node_inode to NULL after sbi->nr_pages[F2FS_WB_CP_DATA] is
decremented to zero. As a result, f2fs_in_warm_node_list() may
dereference a NULL node_inode when checking whether a folio belongs to
the node inode, leading to a panic.
This patch fixes the issue by calling f2fs_in_warm_node_list() before
decrementing sbi->nr_pages[F2FS_WB_CP_DATA], thus preventing the
use-after-free condition.
Cc: stable@kernel.org
Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Reported-by: syzbot+6e4cb1cac5efc96ea0ca@syzkaller.appspotmail.com
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ folio => page ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0a8cf165566ba55a39fd0f4de172119dd646d39a ]
build_sec_desc() and id_mode_to_cifs_acl() derive a DACL pointer from a
server-supplied dacloffset and then use the incoming ACL to rebuild the
chmod/chown security descriptor.
The original fix only checked that the struct smb_acl header fits before
reading dacl_ptr->size or dacl_ptr->num_aces. That avoids the immediate
header-field OOB read, but the rewrite helpers still walk ACEs based on
pdacl->num_aces with no structural validation of the incoming DACL body.
A malicious server can return a truncated DACL that still contains a
header, claims one or more ACEs, and then drive
replace_sids_and_copy_aces() or set_chmod_dacl() past the validated
extent while they compare or copy attacker-controlled ACEs.
Factor the DACL structural checks into validate_dacl(), extend them to
validate each ACE against the DACL bounds, and use the shared validator
before the chmod/chown rebuild paths. parse_dacl() reuses the same
validator so the read-side parser and write-side rewrite paths agree on
what constitutes a well-formed incoming DACL.
Fixes: bc3e9dd9d104 ("cifs: Change SIDs in ACEs while transferring file ownership.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-6
Assisted-by: Codex:gpt-5-4
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[ no kmalloc_objs ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ade67d5f588832c7ba131aadd4215a94ce0a15c8 upstream.
When SEG6_IPTUN_MODE_L2ENCAP_RED (L2ENCAP_RED) was introduced, the
condition in seg6_build_state() that excludes L2 encap modes from
setting LWTUNNEL_STATE_OUTPUT_REDIRECT was not updated to account for
the new mode.
As a consequence, L2ENCAP_RED routes incorrectly trigger seg6_output()
on the output path, where the packet is silently dropped because
skb_mac_header_was_set() fails on L3 packets.
Extend the check to also exclude L2ENCAP_RED, consistent with L2ENCAP.
Fixes: 13f0296be8ec ("seg6: add support for SRv6 H.L2Encaps.Red behavior")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260418162838.31979-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e111c4b3a726df1254670a5cc4868cedb946d37 upstream.
If device_add(&sdkp->disk_dev) fails, put_device() runs
scsi_disk_release(), which frees the scsi_disk but leaves the gendisk
referenced. The device_add_disk() error path in sd_probe() calls
put_disk(gd); call put_disk(gd) here to mirror that cleanup.
Fixes: 265dfe8ebbab ("scsi: sd: Free scsi_disk device via put_device()")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Link: https://patch.msgid.link/20260330014952.152776-1-yangxiuwei@kylinos.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bfdc63936dd4773109b7b8c280c0f3b5ae7d349 upstream.
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ]
Fixes: 8161239a8bcc ("rtmutex: Simplify PI algorithm and make highest prio task get lock")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 984a415f019536ea2d24de9010744e5302a9a948 upstream.
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU).
Fixes: 82cae269cfa95 ("fs/ntfs3: Add initialization of super block")
Cc: stable@vger.kernel.org
Signed-off-by: Tobias Gaertner <tob.gaertner@me.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
