| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20260323134526.647552166@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 453b8fb68f3641fea970db88b7d9a153ed2a37e8 upstream.
The Xen privcmd driver allows to issue arbitrary hypercalls from
user space processes. This is normally no problem, as access is
usually limited to root and the hypervisor will deny any hypercalls
affecting other domains.
In case the guest is booted using secure boot, however, the privcmd
driver would be enabling a root user process to modify e.g. kernel
memory contents, thus breaking the secure boot feature.
The only known case where an unprivileged domU is really needing to
use the privcmd driver is the case when it is acting as the device
model for another guest. In this case all hypercalls issued via the
privcmd driver will target that other guest.
Fortunately the privcmd driver can already be locked down to allow
only hypercalls targeting a specific domain, but this mode can be
activated from user land only today.
The target domain can be obtained from Xenstore, so when not running
in dom0 restrict the privcmd driver to that target domain from the
beginning, resolving the potential problem of breaking secure boot.
This is XSA-482
Reported-by: Teddy Astie <teddy.astie@vates.tech>
Fixes: 1c5de1939c20 ("xen: add privcmd driver")
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1d07bbd7ea36ea0b8dfa8068dbe67eb3a32d9590 ]
When running the command:
'perf record -e "{instructions,instructions:p}" -j any,counter sleep 1',
a "shift-out-of-bounds" warning is reported on CWF.
UBSAN: shift-out-of-bounds in /kbuild/src/consumer/arch/x86/events/intel/lbr.c:970:15
shift exponent 64 is too large for 64-bit type 'long long unsigned int'
......
intel_pmu_lbr_counters_reorder.isra.0.cold+0x2a/0xa7
intel_pmu_lbr_save_brstack+0xc0/0x4c0
setup_arch_pebs_sample_data+0x114b/0x2400
The warning occurs because the second "instructions:p" event, which
involves branch counters sampling, is incorrectly programmed to fixed
counter 0 instead of the general-purpose (GP) counters 0-3 that support
branch counters sampling. Currently only GP counters 0-3 support branch
counters sampling on CWF, any event involving branch counters sampling
should be programed on GP counters 0-3. Since the counter index of fixed
counter 0 is 32, it leads to the "src" value in below code is right
shifted 64 bits and trigger the "shift-out-of-bounds" warning.
cnt = (src >> (order[j] * LBR_INFO_BR_CNTR_BITS)) & LBR_INFO_BR_CNTR_MASK;
The root cause is the loss of the branch counters constraint for the
new event in the branch counters sampling event group. Since it isn't
yet part of the sibling list. This results in the second
"instructions:p" event being programmed on fixed counter 0 incorrectly
instead of the appropriate GP counters 0-3.
To address this, we apply the missing branch counters constraint for
the last event in the group. Additionally, we introduce a new function,
`intel_set_branch_counter_constr()`, to apply the branch counters
constraint and avoid code duplication.
Fixes: 33744916196b ("perf/x86/intel: Support branch counters logging")
Reported-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260228053320.140406-2-dapeng1.mi@linux.intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e7bae9a7a5e1251ab414291f4e9304d702bb9221 ]
The valid range for the pulses-per-revolution devicetree property is
1..4. The current code checks for a range of 1..5. Fix it.
Declare the variable used to retrieve pulses per revolution from
devicetree as u32 (unsigned) to match the of_property_read_u32() API.
The current code uses a postfix decrement when writing the pulses per
resolution into the chip. This has no effect since the value is evaluated
before it is decremented. Fix it by decrementing before evaluating the
value.
Fixes: 7506ebcd662b ("hwmon: (max6639) : Configure based on DT property")
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3b2c2ab4ceb82af484310c3087541eab00ea288b ]
If fstat() fails after open() succeeds, the function returns without
closing the file descriptor. Also preserve errno across close(), since
close() may overwrite it before the error is returned.
Link: https://lore.kernel.org/all/20260318155847.78065-3-objecting@objecting.org/
Fixes: 950313ebf79c ("tools: bootconfig: Add bootconfig command")
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb288d7d869e86d382f35a0e26242c5ccb05ca82 ]
The ':=' override path in xbc_parse_kv() calls xbc_init_node() to
re-initialize an existing value node but does not check the return
value. If xbc_init_node() fails (data offset out of range), parsing
silently continues with stale node data.
Add the missing error check to match the xbc_add_node() call path
which already checks for failure.
In practice, a bootconfig using ':=' to override a value near the
32KB data limit could silently retain the old value, meaning a
security-relevant boot parameter override (e.g., a trace filter or
debug setting) would not take effect as intended.
Link: https://lore.kernel.org/all/20260318155847.78065-2-objecting@objecting.org/
Fixes: e5efaeb8a8f5 ("bootconfig: Support mixing a value and subkeys under a key")
Signed-off-by: Josh Law <objecting@objecting.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4192754e836e0ffed95833509b6ada975b74418 ]
Drop an unusable test in the bprm stack limits.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/all/a3e9b1c2-40c1-45df-9fa2-14ee6a7b3fe2@roeck-us.net
Fixes: 60371f43e56b ("exec: Add KUnit test for bprm_stack_limits()")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0162ab3220bac870e43e229e6e3024d1a21c3f26 ]
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
Signed-off-by: Rahul Bukte <rahul.bukte@sony.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260203044839.1555147-1-suraj.kandpal@intel.com
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad)
Fixes: ff44ad51ebf8 ("drm/i915: Move engine->submit_request selection to a vfunc")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b425e4d0eb321a1116ddbf39636333181675d8f4 ]
parse_durable_handle_context() unconditionally assigns dh_info->fp->conn
to the current connection when handling a DURABLE_REQ_V2 context with
SMB2_FLAGS_REPLAY_OPERATION. ksmbd_lookup_fd_cguid() does not filter by
fp->conn, so it returns file handles that are already actively connected.
The unconditional overwrite replaces fp->conn, and when the overwriting
connection is subsequently freed, __ksmbd_close_fd() dereferences the
stale fp->conn via spin_lock(&fp->conn->llist_lock), causing a
use-after-free.
KASAN report:
[ 7.349357] ==================================================================
[ 7.349607] BUG: KASAN: slab-use-after-free in _raw_spin_lock+0x75/0xe0
[ 7.349811] Write of size 4 at addr ffff8881056ac18c by task kworker/1:2/108
[ 7.350010]
[ 7.350064] CPU: 1 UID: 0 PID: 108 Comm: kworker/1:2 Not tainted 7.0.0-rc3+ #58 PREEMPTLAZY
[ 7.350068] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 7.350070] Workqueue: ksmbd-io handle_ksmbd_work
[ 7.350083] Call Trace:
[ 7.350087] <TASK>
[ 7.350087] dump_stack_lvl+0x64/0x80
[ 7.350094] print_report+0xce/0x660
[ 7.350100] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 7.350101] ? __pfx___mod_timer+0x10/0x10
[ 7.350106] ? _raw_spin_lock+0x75/0xe0
[ 7.350108] kasan_report+0xce/0x100
[ 7.350109] ? _raw_spin_lock+0x75/0xe0
[ 7.350114] kasan_check_range+0x105/0x1b0
[ 7.350116] _raw_spin_lock+0x75/0xe0
[ 7.350118] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350119] ? __call_rcu_common.constprop.0+0x25e/0x780
[ 7.350125] ? close_id_del_oplock+0x2cc/0x4e0
[ 7.350128] __ksmbd_close_fd+0x27f/0xaf0
[ 7.350131] ksmbd_close_fd+0x135/0x1b0
[ 7.350133] smb2_close+0xb19/0x15b0
[ 7.350142] ? __pfx_smb2_close+0x10/0x10
[ 7.350143] ? xas_load+0x18/0x270
[ 7.350146] ? _raw_spin_lock+0x84/0xe0
[ 7.350148] ? __pfx__raw_spin_lock+0x10/0x10
[ 7.350150] ? _raw_spin_unlock+0xe/0x30
[ 7.350151] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 7.350153] ? ksmbd_tree_conn_lookup+0xcd/0xf0
[ 7.350154] handle_ksmbd_work+0x40f/0x1080
[ 7.350156] process_one_work+0x5fa/0xef0
[ 7.350162] ? assign_work+0x122/0x3e0
[ 7.350163] worker_thread+0x54b/0xf70
[ 7.350165] ? __pfx_worker_thread+0x10/0x10
[ 7.350166] kthread+0x346/0x470
[ 7.350170] ? recalc_sigpending+0x19b/0x230
[ 7.350176] ? __pfx_kthread+0x10/0x10
[ 7.350178] ret_from_fork+0x4fb/0x6c0
[ 7.350183] ? __pfx_ret_from_fork+0x10/0x10
[ 7.350185] ? __switch_to+0x36c/0xbe0
[ 7.350188] ? __pfx_kthread+0x10/0x10
[ 7.350190] ret_from_fork_asm+0x1a/0x30
[ 7.350197] </TASK>
[ 7.350197]
[ 7.355160] Allocated by task 123:
[ 7.355261] kasan_save_stack+0x33/0x60
[ 7.355373] kasan_save_track+0x14/0x30
[ 7.355484] __kasan_kmalloc+0x8f/0xa0
[ 7.355593] ksmbd_conn_alloc+0x44/0x6d0
[ 7.355711] ksmbd_kthread_fn+0x243/0xd70
[ 7.355839] kthread+0x346/0x470
[ 7.355942] ret_from_fork+0x4fb/0x6c0
[ 7.356051] ret_from_fork_asm+0x1a/0x30
[ 7.356164]
[ 7.356214] Freed by task 134:
[ 7.356305] kasan_save_stack+0x33/0x60
[ 7.356416] kasan_save_track+0x14/0x30
[ 7.356527] kasan_save_free_info+0x3b/0x60
[ 7.356646] __kasan_slab_free+0x43/0x70
[ 7.356761] kfree+0x1ca/0x430
[ 7.356862] ksmbd_tcp_disconnect+0x59/0xe0
[ 7.356993] ksmbd_conn_handler_loop+0x77e/0xd40
[ 7.357138] kthread+0x346/0x470
[ 7.357240] ret_from_fork+0x4fb/0x6c0
[ 7.357350] ret_from_fork_asm+0x1a/0x30
[ 7.357463]
[ 7.357513] The buggy address belongs to the object at ffff8881056ac000
[ 7.357513] which belongs to the cache kmalloc-1k of size 1024
[ 7.357857] The buggy address is located 396 bytes inside of
[ 7.357857] freed 1024-byte region [ffff8881056ac000, ffff8881056ac400)
Fix by removing the unconditional fp->conn assignment and rejecting the
replay when fp->conn is non-NULL. This is consistent with
ksmbd_lookup_durable_fd(), which also rejects file handles with a
non-NULL fp->conn. For disconnected file handles (fp->conn == NULL),
ksmbd_reopen_durable_fd() handles setting fp->conn.
Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c33615f995aee80657b9fdfbc4ee7f49c2bd733d ]
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x100000000000200(workingset|node=0|zone=2)
[ 4.154160] page_type: f5(slab)
[ 4.154251] raw: 0100000000000200 ffff888100041280 ffff888100040110 ffff888100040110
[ 4.154461] raw: ffff88810430ce80 0000000800200009 00000000f5000000 0000000000000000
[ 4.154668] page dumped because: kasan: bad access detected
[ 4.154820]
[ 4.154866] Memory state around the buggy address:
[ 4.155002] ffff88810430c080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155196] ffff88810430c100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155391] >ffff88810430c180: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
[ 4.155587] ^
[ 4.155693] ffff88810430c200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.155891] ffff88810430c280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 4.156087] ==================================================================
Add the same t_state validation to the compound reuse path, consistent
with ksmbd_tree_conn_lookup().
Fixes: 5005bcb42191 ("ksmbd: validate session id and tree id in the compound request")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 39f44f54afa58661ecae9c27e15f5dbce2372892 ]
The ASICREV_IS_BEIGE_GOBY_P check always took precedence, because it includes all chip revisions upto NV_UNKNOWN.
Fixes: 54b822b3eac3 ("drm/amd/display: Use dce_version instead of chip_id")
Signed-off-by: Andy Nguyen <theofficialflow1996@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9c7be0efa6f0daa949a5f3e3fdf9ea090b0713cb)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2323b019651ad81c20a0f7f817c63392b3110652 ]
parse_edid_displayid_vrr() searches the EDID extension blocks for a
DisplayID extension before parsing the dynamic video timing range.
The code previously checked whether edid_ext was NULL after the search
loop. However, edid_ext is assigned during each iteration of the loop,
so it will never be NULL once the loop has executed. If no DisplayID
extension is found, edid_ext ends up pointing to the last extension
block, and the NULL check does not correctly detect the failure case.
Instead, check whether the loop completed without finding a matching
DisplayID block by testing "i == edid->extensions". This ensures the
function exits early when no DisplayID extension is present and avoids
parsing an unrelated EDID extension block.
Also simplify the EDID validation check using "!edid ||
!edid->extensions".
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:13079 parse_edid_displayid_vrr() warn: variable dereferenced before check 'edid_ext' (see line 13075)
Fixes: a638b837d0e6 ("drm/amd/display: Fix refresh rate range for some panel")
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91c7e6342e98c846b259c57273436fdea4c043f2)
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit da9ba4dcc01e7cf52b7676f0ee9607b8358c2171 ]
When oops_panic_write is set, the driver disables interrupts and
switches to PIO polling mode but still falls through into the DMA
path. DMA cannot be used reliably in panic context, so make the
DMA path an else branch to ensure only PIO is used during panic
writes.
Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bab2bc6e850a697a23b9e5f0e21bb8c187615e95 ]
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access.
Fixes: 92270086b7e5 ("mtd: rawnand: Add support for manufacturer specific lock/unlock operation")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0cfc0e7e3d062b93e9eec6828de000981cdfb152 upstream.
Currently shmem calls xa_get_order to get the swap radix entry order,
requiring a full tree walk. This can be easily combined with the swap
entry value checking (shmem_confirm_swap) to avoid the duplicated lookup
and abort early if the entry is gone already. Which should improve the
performance.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-3-ryncsn@gmail.com
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 8a1968bd997f ("mm/shmem, swap: fix race of truncate and swap entry split")
[ hughd: removed series cover letter and skip_swapcache dependencies ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c241ed8d031693dadf33dd98ed2e7cc363e9b66 upstream.
The current swap-in code assumes that, when a swap entry in shmem mapping
is order 0, its cached folios (if present) must be order 0 too, which
turns out not always correct.
The problem is shmem_split_large_entry is called before verifying the
folio will eventually be swapped in, one possible race is:
CPU1 CPU2
shmem_swapin_folio
/* swap in of order > 0 swap entry S1 */
folio = swap_cache_get_folio
/* folio = NULL */
order = xa_get_order
/* order > 0 */
folio = shmem_swap_alloc_folio
/* mTHP alloc failure, folio = NULL */
<... Interrupted ...>
shmem_swapin_folio
/* S1 is swapped in */
shmem_writeout
/* S1 is swapped out, folio cached */
shmem_split_large_entry(..., S1)
/* S1 is split, but the folio covering it has order > 0 now */
Now any following swapin of S1 will hang: `xa_get_order` returns 0, and
folio lookup will return a folio with order > 0. The
`xa_get_order(&mapping->i_pages, index) != folio_order(folio)` will always
return false causing swap-in to return -EEXIST.
And this looks fragile. So fix this up by allowing seeing a larger folio
in swap cache, and check the whole shmem mapping range covered by the
swapin have the right swap value upon inserting the folio. And drop the
redundant tree walks before the insertion.
This will actually improve performance, as it avoids two redundant Xarray
tree walks in the hot path, and the only side effect is that in the
failure path, shmem may redundantly reallocate a few folios causing
temporary slight memory pressure.
And worth noting, it may seems the order and value check before inserting
might help reducing the lock contention, which is not true. The swap
cache layer ensures raced swapin will either see a swap cache folio or
failed to do a swapin (we have SWAP_HAS_CACHE bit even if swap cache is
bypassed), so holding the folio lock and checking the folio flag is
already good enough for avoiding the lock contention. The chance that a
folio passes the swap entry value check but the shmem mapping slot has
changed should be very low.
Link: https://lkml.kernel.org/r/20250728075306.12704-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20250728075306.12704-2-ryncsn@gmail.com
Fixes: 809bc86517cc ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ hughd: removed skip_swapcache dependencies ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e08d5f515613a9860bfee7312461a19f422adb5e upstream.
If we get a folio from swap_cache_get_folio() successfully but encounter a
failure before the folio is locked, we will unlock the folio which was not
previously locked.
Put the folio and set it to NULL when a failure occurs before the folio is
locked to fix the issue.
Link: https://lkml.kernel.org/r/20250516170939.965736-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20250516170939.965736-2-shikemeng@huaweicloud.com
Fixes: 058313515d5a ("mm: shmem: fix potential data corruption during shmem swapin")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ hughd: removed series cover letter comments ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 058313515d5aab10d0a01dd634f92ed4a4e71d4c upstream.
Alex and Kairui reported some issues (system hang or data corruption) when
swapping out or swapping in large shmem folios. This is especially easy
to reproduce when the tmpfs is mount with the 'huge=within_size'
parameter. Thanks to Kairui's reproducer, the issue can be easily
replicated.
The root cause of the problem is that swap readahead may asynchronously
swap in order 0 folios into the swap cache, while the shmem mapping can
still store large swap entries. Then an order 0 folio is inserted into
the shmem mapping without splitting the large swap entry, which overwrites
the original large swap entry, leading to data corruption.
When getting a folio from the swap cache, we should split the large swap
entry stored in the shmem mapping if the orders do not match, to fix this
issue.
Link: https://lkml.kernel.org/r/2fe47c557e74e9df5fe2437ccdc6c9115fa1bf70.1740476943.git.baolin.wang@linux.alibaba.com
Fixes: 809bc86517cc ("mm: shmem: support large folio swap out")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Reported-by: Kairui Song <ryncsn@gmail.com>
Closes: https://lore.kernel.org/all/1738717785.im3r5g2vxc.none@localhost/
Tested-by: Kairui Song <kasong@tencent.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Matthew Wilcow <willy@infradead.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ hughd: removed skip_swapcache dependencies ]
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 17926cd770ec837ed27d9856cf07f2da8dda4131 upstream.
On Octal DTR capable flashes like Micron Xcella the writes cannot start
or end at an odd address in Octal DTR mode. Extra 0xff bytes need to be
appended or prepended to make sure the start address and end address are
even. 0xff is used because on NOR flashes a program operation can only
flip bits from 1 to 0, not the other way round. 0 to 1 flip needs to
happen via erases.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-2-ziniu.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f156b23df6a84efb2f6686156be94d4988568954 upstream.
On Octal DTR capable flashes like Micron Xcella reads cannot start or
end at an odd address in Octal DTR mode. Extra bytes need to be read at
the start or end to make sure both the start address and length remain
even.
To avoid allocating too much extra memory, thereby putting unnecessary
memory pressure on the system, the temporary buffer containing the extra
padding bytes is capped at PAGE_SIZE bytes. The rest of the 2-byte
aligned part should be read directly in the main buffer.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20250708091646.292-1-ziniu.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1f6aa5bbf1d0f81a8a2aafc16136e7dd9a609ff3 upstream.
When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes
a panic while allocating UV hub info structures.
Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be
allocated on valid nodes.
Fixes: 8a50c5851927 ("x86/platform/uv: UV support for sub-NUMA clustering")
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ab2BmGL0ehVkkjKk@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f35dbac6942171dc4ce9398d1d216a59224590a9 upstream.
Since the validation loop in rb_meta_validate_events() updates the same
cpu_buffer->head_page->entries, the other subbuf entries are not updated.
Fix to use head_page to update the entries field, since it is the cursor
in this loop.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177391153882.193994.17158784065013676533.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 78a6ee14f8b9e1c8f7c77612122444f3be8dc8cc upstream.
The I2C communication is completely broken on the Armada 3700 platform
since commit 0b01392c18b9 ("i2c: pxa: move to generic GPIO recovery").
For example, on the Methode uDPU board, probing of the two onboard
temperature sensors fails ...
[ 7.271713] i2c i2c-0: using pinctrl states for GPIO recovery
[ 7.277503] i2c i2c-0: PXA I2C adapter
[ 7.282199] i2c i2c-1: using pinctrl states for GPIO recovery
[ 7.288241] i2c i2c-1: PXA I2C adapter
[ 7.292947] sfp sfp-eth1: Host maximum power 3.0W
[ 7.299614] sfp sfp-eth0: Host maximum power 3.0W
[ 7.308178] lm75 1-0048: supply vs not found, using dummy regulator
[ 32.489631] lm75 1-0048: probe with driver lm75 failed with error -121
[ 32.496833] lm75 1-0049: supply vs not found, using dummy regulator
[ 82.890614] lm75 1-0049: probe with driver lm75 failed with error -121
... and accessing the plugged-in SFP modules also does not work:
[ 511.298537] sfp sfp-eth1: please wait, module slow to respond
[ 536.488530] sfp sfp-eth0: please wait, module slow to respond
...
[ 1065.688536] sfp sfp-eth1: failed to read EEPROM: -EREMOTEIO
[ 1090.888532] sfp sfp-eth0: failed to read EEPROM: -EREMOTEIO
After a discussion [1], there was an attempt to fix the problem by
reverting the offending change by commit 7b211c767121 ("Revert "i2c:
pxa: move to generic GPIO recovery""), but that only helped to fix
the issue in the 6.1.y stable tree. The reason behind the partial succes
is that there was another change in commit 20cb3fce4d60 ("i2c: Set i2c
pinctrl recovery info from it's device pinctrl") in the 6.3-rc1 cycle
which broke things further.
The cause of the problem is the same in case of both offending commits
mentioned above. Namely, the I2C core code changes the pinctrl state to
GPIO while running the recovery initialization code. Although the PXA
specific initialization also does this, but the key difference is that
it happens before the controller is getting enabled in i2c_pxa_reset(),
whereas in the case of the generic initialization it happens after that.
Change the code to reset the controller only before the first transfer
instead of before registering the controller. This ensures that the
controller is not enabled at the time when the generic recovery code
performs the pinctrl state changes, thus avoids the problem described
above.
As the result this change restores the original behaviour, which in
turn makes the I2C communication to work again as it can be seen from
the following log:
[ 7.363250] i2c i2c-0: using pinctrl states for GPIO recovery
[ 7.369041] i2c i2c-0: PXA I2C adapter
[ 7.373673] i2c i2c-1: using pinctrl states for GPIO recovery
[ 7.379742] i2c i2c-1: PXA I2C adapter
[ 7.384506] sfp sfp-eth1: Host maximum power 3.0W
[ 7.393013] sfp sfp-eth0: Host maximum power 3.0W
[ 7.399266] lm75 1-0048: supply vs not found, using dummy regulator
[ 7.407257] hwmon hwmon0: temp1_input not attached to any thermal zone
[ 7.413863] lm75 1-0048: hwmon0: sensor 'tmp75c'
[ 7.418746] lm75 1-0049: supply vs not found, using dummy regulator
[ 7.426371] hwmon hwmon1: temp1_input not attached to any thermal zone
[ 7.432972] lm75 1-0049: hwmon1: sensor 'tmp75c'
[ 7.755092] sfp sfp-eth1: module MENTECHOPTO POS22-LDCC-KR rev 1.0 sn MNC208U90009 dc 200828
[ 7.764997] mvneta d0040000.ethernet eth1: unsupported SFP module: no common interface modes
[ 7.785362] sfp sfp-eth0: module Mikrotik S-RJ01 rev 1.0 sn 61B103C55C58 dc 201022
[ 7.803426] hwmon hwmon2: temp1_input not attached to any thermal zone
Link: https://lore.kernel.org/r/20230926160255.330417-1-robert.marko@sartura.hr #1
Cc: stable@vger.kernel.org # 6.3+
Fixes: 20cb3fce4d60 ("i2c: Set i2c pinctrl recovery info from it's device pinctrl")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Tested-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260226-i2c-pxa-fix-i2c-communication-v4-1-797a091dae87@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be627abcc0d5dbd5882873bd85fbc18aa3d189ed upstream.
In the commit in Fixes:, when the code has been updated to use an explicit
for loop, instead of for_each_available_child_of_node(), the assumption
that a reference to a device_node structure would be released at each
iteration has been broken.
Now, an explicit of_node_put() is needed to release the reference.
Fixes: 095561f476ab ("i2c: fsi: Create busses for all ports")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/fd805c39f8de51edf303856103d782138a1633c8.1772382022.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa79f996eb41e95aed85a1bd7f56bcd6a3842008 upstream.
The cp2615 driver uses the USB device serial string as the i2c adapter
name but does not make sure that the string exists.
Verify that the device has a serial number before accessing it to avoid
triggering a NULL-pointer dereference (e.g. with malicious devices).
Fixes: 4a7695429ead ("i2c: cp2615: add i2c driver for Silicon Labs' CP2615 Digital Audio Bridge")
Cc: stable@vger.kernel.org # 5.13
Cc: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260309075016.25612-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd644b805da8a253198718741bf363c4c58862ff upstream.
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7caac659a837af9fd4cad85be851982b88859484 upstream.
PSR entry_setup_frames is currently computed directly into struct
intel_dp:intel_psr:entry_setup_frames. This causes a problem if mode change
gets rejected after PSR compute config: Psr_entry_setup_frames computed for
this rejected state is in intel_dp:intel_psr:entry_setup_frame. Fix this by
computing it into intel_crtc_state and copy the value into
intel_dp:intel_psr:entry_setup_frames on PSR enable.
Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312083710.1593781-3-jouni.hogander@intel.com
(cherry picked from commit 8c229b4aa00262c13787982e998c61c0783285e0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
[ dropped intel_psr_needs_wa_18037818876 hunk and adjusted surrounding context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 86259558e422b250aa6aa57163a6d759074573f5 upstream.
isl68137_avs_enable_show_page() uses the return value of
pmbus_read_byte_data() without checking for errors. If the I2C transaction
fails, a negative error code is passed through bitwise operations,
producing incorrect output.
Add an error check to propagate the return value if it is negative.
Additionally, modernize the callback by replacing sprintf()
with sysfs_emit().
Fixes: 038a9c3d1e424 ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260318193952.47908-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19d4b9c8a136704d5f2544e7ac550f27918a5004 upstream.
mp2973_read_word_data() XORs the return value of pmbus_read_word_data()
with PB_STATUS_POWER_GOOD_N without first checking for errors. If the I2C
transaction fails, a negative error code is XORed with the constant,
producing a corrupted value that is returned as valid status data instead
of propagating the error.
Add the missing error check before modifying the return value.
Fixes: acda945afb465 ("hwmon: (pmbus/mp2975) Fix PGOOD in READ_STATUS_WORD")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260317173308.382545-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 614aefe56af8e13331e50220c936fc0689cf5675 ]
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation.
Fixes: 8ed1dc44d3e9 ("ipv4: introduce hardened ip_no_pmtu_disc mode")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260318130558.1050247-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b48731849609cbd8c53785a48976850b443153fd ]
Smatch reports:
drivers/net/dsa/bcm_sf2.c:997 bcm_sf2_sw_resume() warn:
'priv->clk' from clk_prepare_enable() not released on lines: 983,990.
The clock enabled by clk_prepare_enable() in bcm_sf2_sw_resume()
is not released if bcm_sf2_sw_rst() or bcm_sf2_cfp_resume() fails.
Add the missing clk_disable_unprepare() calls in the error paths
to properly release the clock resource.
Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks")
Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Anas Iqbal <mohd.abd.6602@gmail.com>
Link: https://patch.msgid.link/20260318084212.1287-1-mohd.abd.6602@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a63baadf08453f66eb582fdb6dd234f72024723 ]
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20260316193157.65748-1-mhijaz@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbdfaae9609629a9569362e3b8f33d0a20fd783c ]
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path.
Fixes: 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d73f4b53aaaea4c95f245e491aa5eeb8a21874ce ]
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks.
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 24f90fa3994b992d1a09003a3db2599330a5232a ]
Yiming Qian reports UaF when concurrent process is dumping hooks via
nfnetlink_hooks:
BUG: KASAN: slab-use-after-free in nfnl_hook_dump_one.isra.0+0xe71/0x10f0
Read of size 8 at addr ffff888003edbf88 by task poc/79
Call Trace:
<TASK>
nfnl_hook_dump_one.isra.0+0xe71/0x10f0
netlink_dump+0x554/0x12b0
nfnl_hook_get+0x176/0x230
[..]
Defer release until after concurrent readers have completed.
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: 84601d6ee68a ("bpf: add bpf_link support for BPF_NETFILTER programs")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 605b52497bf89b3b154674deb135da98f916e390 ]
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave.
Fixes: caafa84251b88 ("bonding: add the debugfs interface to see RLB hash table")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317005034.1888794-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b3a6df291fecf5f8a308953b65ca72b7fc9e015d ]
When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0
(success) without actually creating a socket. Callers such as
fou_create() then proceed to dereference the uninitialized socket
pointer, resulting in a NULL pointer dereference.
The captured NULL deref crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764)
[...]
Call Trace:
<TASK>
genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209)
[...]
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1))
__sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1))
__x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130)
This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so
callers correctly take their error paths. There is only one caller of
the vulnerable function and only privileged users can trigger it.
Fixes: fd384412e199b ("udp_tunnel: Seperate ipv6 functions into its own file.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260317010241.1893893-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit beb6e2e5976a128b0cccf10d158124422210c5ef ]
In IPSec full offload mode, the device reports an ESN (Extended
Sequence Number) wrap event to the driver. The driver validates this
event by querying the IPSec ASO and checking that the esn_event_arm
field is 0x0, which indicates an event has occurred. After handling
the event, the driver must re-arm the context by setting esn_event_arm
back to 0x1.
A race condition exists in this handling path. After validating the
event, the driver calls mlx5_accel_esp_modify_xfrm() to update the
kernel's xfrm state. This function temporarily releases and
re-acquires the xfrm state lock.
So, need to acknowledge the event first by setting esn_event_arm to
0x1. This prevents the driver from reprocessing the same ESN update if
the hardware sends events for other reason. Since the next ESN update
only occurs after nearly 2^31 packets are received, there's no risk of
missing an update, as it will happen long after this handling has
finished.
Processing the event twice causes the ESN high-order bits (esn_msb) to
be incremented incorrectly. The driver then programs the hardware with
this invalid ESN state, which leads to anti-replay failures and a
complete halt of IPSec traffic.
Fix this by re-arming the ESN event immediately after it is validated,
before calling mlx5_accel_esp_modify_xfrm(). This ensures that any
spurious, duplicate events are correctly ignored, closing the race
window.
Fixes: fef06678931f ("net/mlx5e: Fix ESN update kernel panic")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 99b36850d881e2d65912b2520a1c80d0fcc9429a ]
The query or updating IPSec offload object is through Access ASO WQE.
The driver uses a single mlx5e_ipsec_aso struct for each PF, which
contains a shared DMA-mapped context for all ASO operations.
A race condition exists because the ASO spinlock is released before
the hardware has finished processing WQE. If a second operation is
initiated immediately after, it overwrites the shared context in the
DMA area.
When the first operation's completion is processed later, it reads
this corrupted context, leading to unexpected behavior and incorrect
results.
This commit fixes the race by introducing a private context within
each IPSec offload object. The shared ASO context is now copied to
this private context while the ASO spinlock is held. Subsequent
processing uses this saved, per-object context, ensuring its integrity
is maintained.
Fixes: 1ed78fc03307 ("net/mlx5e: Update IPsec soft and hard limits")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7e3a5d9c0d66b7fb44f63aef3bd734821afa0c8 ]
A lock dependency cycle exists where:
1. mlx5_ib_roce_init -> mlx5_core_uplink_netdev_event_replay ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem) ->
mlx5e_mdev_notifier_event -> mlx5_netdev_notifier_register ->
register_netdevice_notifier_dev_net (takes rtnl)
=> notifier_rwsem -> rtnl
2. mlx5e_probe -> _mlx5e_probe ->
mlx5_core_uplink_netdev_set (takes uplink_netdev_lock) ->
mlx5_blocking_notifier_call_chain (takes notifier_rwsem)
=> uplink_netdev_lock -> notifier_rwsem
3: devlink_nl_rate_set_doit -> devlink_nl_rate_set ->
mlx5_esw_devlink_rate_leaf_tx_max_set -> esw_qos_devlink_rate_to_mbps ->
mlx5_esw_qos_max_link_speed_get (takes rtnl) ->
mlx5_esw_qos_lag_link_speed_get_locked ->
mlx5_uplink_netdev_get (takes uplink_netdev_lock)
=> rtnl -> uplink_netdev_lock
=> BOOM! (lock cycle)
Fix that by restricting the rtnl-protected section to just the necessary
part, the call to netdev_master_upper_dev_get and speed querying, so
that the last lock dependency is avoided and the cycle doesn't close.
This is safe because mlx5_uplink_netdev_get uses netdev_hold to keep the
uplink netdev alive while its master device is queried.
Use this opportunity to rename the ambiguously-named "hold_rtnl_lock"
argument to "take_rtnl" and remove the "_locked" suffix from
mlx5_esw_qos_lag_link_speed_get_locked.
Fixes: 6b4be64fd9fe ("net/mlx5e: Harden uplink netdev access against device unbind")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260316094603.6999-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 34b11cc56e4369bc08b1f4c4a04222d75ed596ce ]
If hardware doesn't support RX Flow Filters, rx_fs_lock spinlock is not
initialized leading to the following assertion splat triggerable via
set_rxnfc callback.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 1 PID: 949 Comm: syz.0.6 Not tainted 6.1.164+ #113
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xba lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:974 [inline]
register_lock_class+0x141b/0x17f0 kernel/locking/lockdep.c:1287
__lock_acquire+0x74f/0x6c40 kernel/locking/lockdep.c:4928
lock_acquire kernel/locking/lockdep.c:5662 [inline]
lock_acquire+0x190/0x4b0 kernel/locking/lockdep.c:5627
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x33/0x50 kernel/locking/spinlock.c:162
gem_del_flow_filter drivers/net/ethernet/cadence/macb_main.c:3562 [inline]
gem_set_rxnfc+0x533/0xac0 drivers/net/ethernet/cadence/macb_main.c:3667
ethtool_set_rxnfc+0x18c/0x280 net/ethtool/ioctl.c:961
__dev_ethtool net/ethtool/ioctl.c:2956 [inline]
dev_ethtool+0x229c/0x6290 net/ethtool/ioctl.c:3095
dev_ioctl+0x637/0x1070 net/core/dev_ioctl.c:510
sock_do_ioctl+0x20d/0x2c0 net/socket.c:1215
sock_ioctl+0x577/0x6d0 net/socket.c:1320
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x18c/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:46 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:76
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
A more straightforward solution would be to always initialize rx_fs_lock,
just like rx_fs_list. However, in this case the driver set_rxnfc callback
would return with a rather confusing error code, e.g. -EINVAL. So deny
set_rxnfc attempts directly if the RX filtering feature is not supported
by hardware.
Fixes: ae8223de3df5 ("net: macb: Added support for RX filtering")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260316103826.74506-2-pchelkin@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bf504b229cb8d534eccbaeaa23eba34c05131e25 ]
After commi f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference
in acpi_processor_errata_piix4()"), device pointers may be dereferenced
after dropping references to the device objects pointed to by them,
which may cause a use-after-free to occur.
Moreover, debug messages about enabling the errata may be printed
if the errata flags corresponding to them are unset.
Address all of these issues by moving message printing to the points
in the code where the errata flags are set.
Fixes: f132e089fe89 ("ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/linux-acpi/938e2206-def5-4b7a-9b2c-d1fd37681d8a@roeck-us.net/
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5975693.DvuYhMxLoT@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit deb353d9bb009638b7762cae2d0b6e8fdbb41a69 ]
Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom
before skb_push"), wl1271_tx_allocate() and with it
wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails.
However, in wlcore_tx_work_locked(), a return value of -EAGAIN from
wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being
full. This causes the code to flush the buffer, put the skb back at the
head of the queue, and immediately retry the same skb in a tight while
loop.
Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens
immediately with GFP_ATOMIC, this will result in an infinite loop and a
CPU soft lockup. Return -ENOMEM instead so the packet is dropped and
the loop terminates.
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Assisted-by: Gemini:gemini-3.1-pro
Fixes: e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push")
Cc: Peter Astrand <astrand@lysator.liu.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260318064636.3065925-1-linux@roeck-us.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73bb9a2d33bf81f6eecaa0f474b6c6dbe9855bd ]
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent.
Fixes: 2e3c8736820b ("mac80211: support functions for mesh")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Link: https://patch.msgid.link/20260318034244.2595020-1-xmei5@asu.edu
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fc9c69be594756b81b54c6bc40803fa6052f35ae ]
When iavf_add_vlan() finds an existing filter in IAVF_VLAN_REMOVE
state, it transitions the filter to IAVF_VLAN_ACTIVE assuming the
pending delete can simply be cancelled. However, there is no guarantee
that iavf_del_vlans() has not already processed the delete AQ request
and removed the filter from the PF. In that case the filter remains in
the driver's list as IAVF_VLAN_ACTIVE but is no longer programmed on
the NIC. Since iavf_add_vlans() only picks up filters in
IAVF_VLAN_ADD state, the filter is never re-added, and spoof checking
drops all traffic for that VLAN.
CPU0 CPU1 Workqueue
---- ---- ---------
iavf_del_vlan(vlan 100)
f->state = REMOVE
schedule AQ_DEL_VLAN
iavf_add_vlan(vlan 100)
f->state = ACTIVE
iavf_del_vlans()
f is ACTIVE, skip
iavf_add_vlans()
f is ACTIVE, skip
Filter is ACTIVE in driver but absent from NIC.
Transition to IAVF_VLAN_ADD instead and schedule
IAVF_FLAG_AQ_ADD_VLAN_FILTER so iavf_add_vlans() re-programs the
filter. A duplicate add is idempotent on the PF.
Fixes: 0c0da0e95105 ("iavf: refactor VLAN filter states")
Signed-off-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45b33e805bd39f615d9353a7194b2da5281332df ]
If an XDP application that requested TX timestamping is shutting down
while the link of the interface in use is still up the following kernel
splat is reported:
[ 883.803618] [ T1554] BUG: unable to handle page fault for address: ffffcfb6200fd008
...
[ 883.803650] [ T1554] Call Trace:
[ 883.803652] [ T1554] <TASK>
[ 883.803654] [ T1554] igc_ptp_tx_tstamp_event+0xdf/0x160 [igc]
[ 883.803660] [ T1554] igc_tsync_interrupt+0x2d5/0x300 [igc]
...
During shutdown of the TX ring the xsk_meta pointers are left behind, so
that the IRQ handler is trying to touch them.
This issue is now being fixed by cleaning up the stale xsk meta data on
TX shutdown. TX timestamps on other queues remain unaffected.
Fixes: 15fd021bc427 ("igc: Add Tx hardware timestamp request for AF_XDP zero-copy packet")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ffba246652faf4a36aedc66059c2f94e4c83ea5 ]
igc_xmit_frame() misses updating skb->tail when the packet size is
shorter than the minimum one.
Use skb_put_padto() in alignment with other Intel Ethernet drivers.
Fixes: 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 069c8f5aebe4d5224cf62acc7d4b3486091c658a ]
syzbot reports "task hung in rpm_resume"
This is caused by aqc111_suspend calling
the PM variant of its write_cmd routine.
The simplified call trace looks like this:
rpm_suspend()
usb_suspend_both() - here udev->dev.power.runtime_status == RPM_SUSPENDING
aqc111_suspend() - called for the usb device interface
aqc111_write32_cmd()
usb_autopm_get_interface()
pm_runtime_resume_and_get()
rpm_resume() - here we call rpm_resume() on our parent
rpm_resume() - Here we wait for a status change that will never happen.
At this point we block another task which holds
rtnl_lock and locks up the whole networking stack.
Fix this by replacing the write_cmd calls with their _nopm variants
Reported-by: syzbot+48dc1e8dfc92faf1124c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48dc1e8dfc92faf1124c
Fixes: e58ba4544c77 ("net: usb: aqc111: Add support for wake on LAN by MAGIC packet")
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Link: https://patch.msgid.link/20260313141643.1181386-1-zlatistiv@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a0671125d4f55e1e98d9bde8a0b671941987e208 ]
Fix a use-after-free in the clsact qdisc upon init/destroy rollback asymmetry.
The latter is achieved by first fully initializing a clsact instance, and
then in a second step having a replacement failure for the new clsact qdisc
instance. clsact_init() initializes ingress first and then takes care of the
egress part. This can fail midway, for example, via tcf_block_get_ext(). Upon
failure, the kernel will trigger the clsact_destroy() callback.
Commit 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry") details the
way how the transition is happening. If tcf_block_get_ext on the q->ingress_block
ends up failing, we took the tcx_miniq_inc reference count on the ingress
side, but not yet on the egress side. clsact_destroy() tests whether the
{ingress,egress}_entry was non-NULL. However, even in midway failure on the
replacement, both are in fact non-NULL with a valid egress_entry from the
previous clsact instance.
What we really need to test for is whether the qdisc instance-specific ingress
or egress side previously got initialized. This adds a small helper for checking
the miniq initialization called mini_qdisc_pair_inited, and utilizes that upon
clsact_destroy() in order to fix the use-after-free scenario. Convert the
ingress_destroy() side as well so both are consistent to each other.
Fixes: 1cb6f0bae504 ("bpf: Fix too early release of tcx_entry")
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260313065531.98639-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
