| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit dff4f9ff5d7f289e4545cc936362e01ed3252742 upstream.
The function btrfs_encode_fh() does not properly account for the three
cases it handles.
Before writing to the file handle (fh), the function only returns to the
user BTRFS_FID_SIZE_NON_CONNECTABLE (5 dwords, 20 bytes) or
BTRFS_FID_SIZE_CONNECTABLE (8 dwords, 32 bytes).
However, when a parent exists and the root ID of the parent and the
inode are different, the function writes BTRFS_FID_SIZE_CONNECTABLE_ROOT
(10 dwords, 40 bytes).
If *max_len is not large enough, this write goes out of bounds because
BTRFS_FID_SIZE_CONNECTABLE_ROOT is greater than
BTRFS_FID_SIZE_CONNECTABLE originally returned.
This results in an 8-byte out-of-bounds write at
fid->parent_root_objectid = parent_root_id.
A previous attempt to fix this issue was made but was lost.
https://lore.kernel.org/all/4CADAEEC020000780001B32C@vpn.id2.novell.com/
Although this issue does not seem to be easily triggerable, it is a
potential memory corruption bug that should be fixed. This patch
resolves the issue by ensuring the function returns the appropriate size
for all three cases and validates that *max_len is large enough before
writing any data.
Fixes: be6e8dc0ba84 ("NFS support for btrfs - v3")
CC: stable@vger.kernel.org # 3.0+
Signed-off-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 06d712d297649f48ebf1381d19bd24e942813b37 upstream.
trace_block_split() is missing, resulting in blktrace inability to catch
BIO split events and making it harder to analyze the BIO sequence.
Cc: stable@vger.kernel.org
Fixes: 488f6682c832 ("block: blk-crypto-fallback for Inline Encryption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5949e7c4890c3cf65e783c83c355b95e21f10dba upstream.
[WHAT]
Since dcn35, DTBCLK can be disabled when no DP2 sink connected for
power saving purpose.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d1684a077d62fddfac074052c162ec6573a34e1 upstream.
Currently this is hidden behind perfmon_capable() since this is
technically an info leak, given that this is a system wide metric.
However the granularity reported here is always PAGE_SIZE aligned, which
matches what the core kernel is already willing to expose to userspace
if querying how many free RAM pages there are on the system, and that
doesn't need any special privileges. In addition other drm drivers seem
happy to expose this.
The motivation here if with oneAPI where they want to use the system
wide 'used' reporting here, so not the per-client fdinfo stats. This has
also come up with some perf overlay applications wanting this
information.
Fixes: 1105ac15d2a1 ("drm/xe/uapi: restrict system wide accounting")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Joshua Santosh <joshua.santosh.ranjan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250919122052.420979-2-matthew.auld@intel.com
(cherry picked from commit 4d0b035fd6dae8ee48e9c928b10f14877e595356)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e4bea919584ff292c9156cf7d641a2ab3cbe27b0 upstream.
In `nouveau_bo_move_prep`, if `nouveau_mem_map` fails, an error code
should be returned. Currently, it returns zero even if vmm addr is not
correctly mapped.
Cc: stable@vger.kernel.org
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Fixes: 9ce523cc3bf2 ("drm/nouveau: separate buffer object backing memory from nvkm structures")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d83f1d19c898ac1b54ae64d1c950f5beff801982 upstream.
Remove fixed PPI lane count setup. The R-Car DSI host is capable
of operating in 1..4 DSI lane mode. Remove the hard-coded 4-lane
configuration from PPI register settings and instead configure
the PPI lane count according to lane count information already
obtained by this driver instance.
Configure TXSETR register to match PPI lane count. The R-Car V4H
Reference Manual R19UH0186EJ0121 Rev.1.21 section 67.2.2.3 Tx Set
Register (TXSETR), field LANECNT description indicates that the
TXSETR register LANECNT bitfield lane count must be configured
such, that it matches lane count configuration in PPISETR register
DLEN bitfield. Make sure the LANECNT and DLEN bitfields are
configured to match.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250813210840.97621-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca2a6abdaee43808034cdb218428d2ed85fd3db8 upstream.
When bailing out due to group_priority_permit() failure, the queue_args
need to be freed. Fix it by rearranging the function to use the
goto-on-error pattern, such that the success case flows straight without
indentation while error cases jump forward to cleanup.
Cc: stable@vger.kernel.org
Fixes: 5f7762042f8a ("drm/panthor: Restrict high priorities on group_create")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241113-panthor-fix-gcq-bailout-v1-1-654307254d68@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4f4098c57e139ad972154077fb45c3e3141555dd upstream.
When cdev_device_add() failed, calling put_device() to explicitly
release dev->lirc_dev. Otherwise, it could cause the fault of the
reference count.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: a6ddd4fecbb0 ("media: lirc: remove last remnants of lirc kapi")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e743cd0a73246219da117ee99061aad51c4748c upstream.
We don't use OF ports and remote-endpoints to connect the CSI2RX bridge
and this device in the device tree, thus it is wrong to use
v4l2_create_fwnode_links_to_pad() to create the media graph link between
the two.
It works out on accident, as neither the source nor the sink implement
the .get_fwnode_pad() callback, and the framework helper falls back on
using the first source and sink pads to create the link between them.
Instead, manually create the media link from the first source pad of the
bridge to the first sink pad of the J721E CSI2RX.
Fixes: b4a3d877dc92 ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 072799db233f9de90a62be54c1e59275c2db3969 upstream.
Ensure that we clean up the platform bus when we remove this driver.
This fixes a crash seen when reloading the module for the child device
with the parent not yet reloaded.
Fixes: b4a3d877dc92 ("media: ti: Add CSI2RX support for J721E")
Cc: stable@vger.kernel.org
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com> (on SK-AM68)
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4bd8a6147645480d550242ff816b4c7ba160e5b7 upstream.
The vivid driver supports the <Vendor Command With ID> message,
but if the Vendor ID of the received message didn't match the Vendor ID
of the CEC Adapter, then it ignores it (good) and returns 0 (bad).
It should return -ENOMSG to indicate that other followers should be
asked to handle it. Return code 0 means that the driver handled it,
which is wrong in this case.
As a result, userspace followers never get the chance to process such a
message.
Refactor the code a bit to have the function return -ENOMSG at the end,
drop the default case, and ensure that the message handlers return 0.
That way 0 is only returned if the message is actually handled in the
vivid_received() function.
Fixes: 812765cd6954 ("media: vivid: add <Vendor Command With ID> support")
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 93f213b444a40f1e7a4383b499b65e782dcb14b9 upstream.
When starting venus with the "no_tz" code path, IRIS2 needs the same
boot/reset sequence as IRIS2_1. This is because most of the registers were
moved to the "wrapper_tz_base", which is already defined for both IRIS2 and
IRIS2_1 inside core.c. Add IRIS2 to the checks inside firmware.c as well to
make sure that it uses the correct reset sequence.
Both IRIS2 and IRIS2_1 are HFI v6 variants, so the correct sequence was
used before commit c38610f8981e ("media: venus: firmware: Sanitize
per-VPU-version").
Fixes: c38610f8981e ("media: venus: firmware: Sanitize per-VPU-version")
Cc: stable@vger.kernel.org
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Fixed commit log IRIS -> IRIS2]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fa37ba25a1dfc084e24ea9acc14bf1fad8af14c upstream.
The s5p_mfc_cmd_args structure in the v6 driver is never used, not
initialized to anything other than zero, but as of clang-21 this
causes a warning:
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_cmd_v6.c:45:7: error: variable 'h2r_args' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]
45 | &h2r_args);
| ^~~~~~~~
Just remove this for simplicity. Since the function is also called
through a callback, this does require adding a trivial wrapper with
the correct prototype.
Fixes: f96f3cfa0bb8 ("[media] s5p-mfc: Update MFC v4l2 driver to support MFC6.x")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c0d3f6969bb4d72476cfe7ea9263831f1c283704 upstream.
Fix potential leak of uninitialized stack data to userspace by ensuring
that the `scan` structure is zeroed before use.
Fixes: 0ab13674a9bd ("media: pci: mgb4: Added Digiteq Automotive MGB4 driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1069a4fe637d0e3e4c163e3f8df9be306cc299b4 upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, free blanking_ptr and set it to 0. As 0 is a
valid DMA address, use blanking_ptr to test if the DMA address
is set.
Fixes: 1a0adaf37c30 ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eec81250219a209b863f11d02128ec1dd8e20877 upstream.
Commit b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always
require an enabled link") expanded the meaning of the MUST_CONNECT flag
to require an enabled link in all cases. To do so, the link exploration
code was expanded to cover unconnected pads, in order to reject those
that have the MUST_CONNECT flag set. The implementation was however
incorrect, ignoring unconnected pads instead of ignoring connected pads.
Fix it.
Reported-by: Martin Kepplinger-Novaković <martink@posteo.de>
Closes: https://lore.kernel.org/linux-media/20250205172957.182362-1-martink@posteo.de
Reported-by: Maud Spierings <maudspierings@gocontroll.com>
Closes: https://lore.kernel.org/linux-media/20250818-imx8_isi-v1-1-e9cfe994c435@gocontroll.com
Fixes: b3decc5ce7d7 ("media: mc: Expand MUST_CONNECT flag to always require an enabled link")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Maud Spierings <maudspierings@gocontroll.com>
Tested-by: Martin Kepplinger-Novaković <martink@posteo.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bacd713145443dce7764bb2967d30832a95e5ec8 upstream.
Change "ret" from unsigned int to int type in mt9v111_calc_frame_rate()
to store negative error codes or zero returned by __mt9v111_hw_reset()
and other functions.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Fixes: aab7ed1c3927 ("media: i2c: Add driver for Aptina MT9V111")
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 23b53639a793477326fd57ed103823a8ab63084f upstream.
The DMA map functions can fail and should be tested for errors.
If the mapping fails, dealloc buffers, and return.
Fixes: 1c1e45d17b66 ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d5d12cc03e501c38925e544abe44d5bfe23dc930 upstream.
Delete the external-module style Makefile commands. They are not needed
for in-tree modules.
This is the only Makefile in the kernel tree (aside from tools/ and
samples/) that uses this Makefile style.
The same files are built with or without this patch.
Fixes: 056f2821b631 ("media: cec: extron-da-hd-4k-plus: add the Extron DA HD 4K Plus CEC driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ece3173f87df03935906d0c612c2aeda9db92ca upstream.
Make sure to drop the reference to the secure monitor device taken by
of_find_device_by_node() when looking up its driver data on behalf of
other drivers (e.g. during probe).
Note that holding a reference to the platform device does not prevent
its driver data from going away so there is no point in keeping the
reference after the helper returns.
Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver")
Cc: stable@vger.kernel.org # 5.5
Cc: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20250725074019.8765-1-johan@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3fcc8e146935415d69ffabb5df40ecf50e106131 upstream.
VIRQs come in 3 flavors, per-VPU, per-domain, and global, and the VIRQs
are tracked in per-cpu virq_to_irq arrays.
Per-domain and global VIRQs must be bound on CPU 0, and
bind_virq_to_irq() sets the per_cpu virq_to_irq at registration time
Later, the interrupt can migrate, and info->cpu is updated. When
calling __unbind_from_irq(), the per-cpu virq_to_irq is cleared for a
different cpu. If bind_virq_to_irq() is called again with CPU 0, the
stale irq is returned. There won't be any irq_info for the irq, so
things break.
Make xen_rebind_evtchn_to_cpu() update the per_cpu virq_to_irq mappings
to keep them update to date with the current cpu. This ensures the
correct virq_to_irq is cleared in __unbind_from_irq().
Fixes: e46cdb66c8fc ("xen: event channels")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-4-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 07ce121d93a5e5fb2440a24da3dbf408fcee978e upstream.
Change find_virq() to return -EEXIST when a VIRQ is bound to a
different CPU than the one passed in. With that, remove the BUG_ON()
from bind_virq_to_irq() to propogate the error upwards.
Some VIRQs are per-cpu, but others are per-domain or global. Those must
be bound to CPU0 and can then migrate elsewhere. The lookup for
per-domain and global will probably fail when migrated off CPU 0,
especially when the current CPU is tracked. This now returns -EEXIST
instead of BUG_ON().
A second call to bind a per-domain or global VIRQ is not expected, but
make it non-fatal to avoid trying to look up the irq, since we don't
know which per_cpu(virq_to_irq) it will be in.
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-3-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f770c3d858687252f1270265ba152d5c622e793f upstream.
The device power management API has the following asymmetry:
* dpm_suspend_start() does not clean up on failure
(it requires a call to dpm_resume_end())
* dpm_suspend_end() does clean up on failure
(it does not require a call to dpm_resume_start())
The asymmetry was introduced by commit d8f3de0d2412 ("Suspend-related
patches for 2.6.27") in June 2008: It removed a call to device_resume()
from device_suspend() (which was later renamed to dpm_suspend_start()).
When Xen began using the device power management API in May 2008 with
commit 0e91398f2a5d ("xen: implement save/restore"), the asymmetry did
not yet exist. But since it was introduced, a call to dpm_resume_end()
is missing in the error path of dpm_suspend_start(). Fix it.
Fixes: d8f3de0d2412 ("Suspend-related patches for 2.6.27")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.27
Reviewed-by: "Rafael J. Wysocki (Intel)" <rafael@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <22453676d1ddcebbe81641bb68ddf587fee7e21e.1756990799.git.lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08df2d7dd4ab2db8a172d824cda7872d5eca460a upstream.
rc is overwritten by the evtchn_status hypercall in each iteration, so
the return value will be whatever the last iteration is. This could
incorrectly return success even if the event channel was not found.
Change to an explicit -ENOENT for an un-found virq and return 0 on a
successful match.
Fixes: 62cc5fc7b2e0 ("xen/pv-on-hvm kexec: rebind virqs to existing eventchannel ports")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250828003604.8949-2-jason.andryuk@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c254815b02673cc77a84103c4c0d6197bd90c0ef upstream.
There are variants of the Rockchip Innosilicon CSI DPHY (e.g., the RK3568
variant) that are powered on by default as they are part of the ALIVE power
domain.
Remove 'power-domains' from the required properties in order to avoid false
positives.
Fixes: 22c8e0a69b7f ("dt-bindings: phy: add compatible for rk356x to rockchip-inno-csi-dphy")
Cc: stable@kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://lore.kernel.org/r/20250616-rk3588-csi-dphy-v4-2-a4f340a7f0cf@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b3fe1c83a56f3cb7c475747ee1c6ec5a9dd5f60e upstream.
CMN S3's DTM offset is different between r0px and r1p0, and it
turns out this was not a error in the earlier documentation, but
does actually exist in the design. Lovely.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f7e ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 74139a64e8cedb6d971c78d5d17384efeced1725 upstream.
Add missing of_node_put() calls to release
device node references obtained via of_parse_phandle().
Fixes: 06ee7a950b6a ("ARM: OMAP2+: pm33xx-core: Add cpuidle_ops for am335x/am437x")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250902075943.2408832-1-linmq006@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8a6506e1ba0d2b831729808d958aae77604f12f9 upstream.
There is an issue possible where TI AM33xx SoCs do not boot properly after
a reset if EMU0/EMU1 pins were used as GPIO and have been driving low level
actively prior to reset [1].
"Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
ICEPick Samples
The state of the EMU[1:0] terminals are latched during reset to determine
ICEPick boot mode. For normal device operation, these terminals must be
pulled up to a valid high logic level ( > VIH min) before ICEPick samples
the state of these terminals, which occurs
[five CLK_M_OSC clock cycles - 10 ns] after the falling edge of WARMRSTn.
Many applications may not require the secondary GPIO function of the
EMU[1:0] terminals. In this case, they would only be connected to pull-up
resistors, which ensures they are always high when ICEPick samples.
However, some applications may need to use these terminals as GPIO where
they could be driven low before reset is asserted. This usage of the
EMU[1:0] terminals may require special attention to ensure the terminals
are allowed to return to a valid high-logic level before ICEPick samples
the state of these terminals.
When any device reset is asserted, the pin mux mode of EMU[1:0] terminals
configured to operate as GPIO (mode 7) will change back to EMU input
(mode 0) on the falling edge of WARMRSTn. This only provides a short period
of time for the terminals to return high if driven low before reset is
asserted...
If the EMU[1:0] terminals are configured to operate as GPIO, the product
should be designed such these terminals can be pulled to a valid high-logic
level within 190 ns after the falling edge of WARMRSTn."
We've noticed this problem with custom am335x hardware in combination with
recently implemented cold reset method
(commit 6521f6a195c70 ("ARM: AM33xx: PRM: Implement REBOOT_COLD")).
It looks like the problem can affect other HW, for instance AM335x
Chiliboard, because the latter has LEDs on GPIO3_7/GPIO3_8 as well.
One option would be to check if the pins are in GPIO mode and either switch
to output active high, or switch to input and poll until the external
pull-ups have brought the pins to the desired high state. But fighting
with GPIO driver for these pins is probably not the most straight forward
approch in a reboot handler.
Fortunately we can easily control pinmuxing here and rely on the external
pull-ups. TI recommends 4k7 external pull up resistors [2] and even with
quite conservative estimation for pin capacity (1 uF should never happen)
the required delay shall not exceed 5ms.
[1] Link: https://www.ti.com/lit/pdf/sprz360
[2] Link: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/866346/am3352-emu-1-0-questions
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250717152708.487891-1-alexander.sverdlin@siemens.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 195a1b7d8388c0ec2969a39324feb8bebf9bb907 upstream.
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1bf8 ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c4e48afb6d85c1a8f9fdbae1fdf17ceef4a6f5b upstream.
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
Reference Docs
TRM (AM62A) - https://www.ti.com/lit/ug/spruj16b/spruj16b.pdf
TRM (AM62D) - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Fixes: 5fc6b1b62639c ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250903062513.813925-2-p-bhagat@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9a185198f96259311543b30d884d8c01da913f7 upstream.
pm8010 is a camera specific PMIC, and may not be present on some
devices. These may instead use a dedicated vreg for this purpose (Dell
XPS 9345, Dell Inspiron..) or use USB webcam instead of a MIPI one
alltogether (Lenovo Thinbook 16, Lenovo Yoga..).
Disable pm8010 by default, let platforms that actually have one onboard
enable it instead.
Cc: stable@vger.kernel.org
Fixes: 2559e61e7ef4 ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250701183625.1968246-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 316294bb6695a43a9181973ecd4e6fb3e576a9f7 upstream.
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
Cc: stable@vger.kernel.org
Fixes: 27ca1de07dc3 ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-sdm845-slimbam-channels-v1-1-498f7d46b9ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f73c82c855e186e9b67125e3eee743960320e43c upstream.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-2-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 99b78773c2ae55dcc01025f94eae8ce9700ae985 upstream.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 305410ffd1b2 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-1-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 496f9372eae14775e0524e83e952814691fe850a upstream.
In the ACPI debugger interface, the helper functions for read and write
operations use "int" as the length parameter data type. When a large
"size_t count" is passed from the file operations, this cast to "int"
results in truncation and a negative value due to signed integer
representation.
Logically, this negative number propagates to the min() calculation,
where it is selected over the positive buffer space value, leading to
unexpected behavior. Subsequently, when this negative value is used in
copy_to_user() or copy_from_user(), it is interpreted as a large positive
value due to the unsigned nature of the size parameter in these functions,
causing the copy operations to attempt handling sizes far beyond the
intended buffer limits.
Address the issue by:
- Changing the length parameters in acpi_aml_read_user() and
acpi_aml_write_user() from "int" to "size_t", aligning with the
expected unsigned size semantics.
- Updating return types and local variables in acpi_aml_read() and
acpi_aml_write() to "ssize_t" for consistency with kernel file
operation conventions.
- Using "size_t" for the "n" variable to ensure calculations remain
unsigned.
- Using min_t() for circ_count_to_end() and circ_space_to_end() to
ensure type-safe comparisons and prevent integer overflow.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20250923013113.20615-1-a.jahangirzad@gmail.com
[ rjw: Changelog tweaks, local variable definitions ordering adjustments ]
Fixes: 8cfb0cdf07e2 ("ACPI / debugger: Add IO interface to access debugger functionalities")
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4aac453deca0d9c61df18d968f8864c3ae7d3d8d upstream.
Previously, after `rmmod acpi_tad`, `modprobe acpi_tad` would fail
with this dmesg:
sysfs: cannot create duplicate filename '/devices/platform/ACPI000E:00/time'
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x90
dump_stack+0x10/0x20
sysfs_warn_dup+0x8b/0xa0
sysfs_add_file_mode_ns+0x122/0x130
internal_create_group+0x1dd/0x4c0
sysfs_create_group+0x13/0x20
acpi_tad_probe+0x147/0x1f0 [acpi_tad]
platform_probe+0x42/0xb0
</TASK>
acpi-tad ACPI000E:00: probe with driver acpi-tad failed with error -17
Fixes: 3230b2b3c1ab ("ACPI: TAD: Add low-level support for real time capability")
Signed-off-by: Daniel Tang <danielzgtg.opensource@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/2881298.hMirdbgypa@daniel-desktop3
Cc: 5.2+ <stable@vger.kernel.org> # 5.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0759b10989c5c5aae3d455458c9fc4e8cc694f7 upstream.
The ACPI handle passed to acpi_extract_properties() as the first
argument represents the ACPI namespace scope in which to look for
objects returning buffers associated with buffer properties.
For _DSD objects located immediately under ACPI devices, this handle is
the same as the handle of the device object holding the _DSD, but for
data-only subnodes it is not so.
First of all, data-only subnodes are represented by objects that
cannot hold other objects in their scopes (like control methods).
Therefore a data-only subnode handle cannot be used for completing
relative pathname segments, so the current code in
in acpi_nondev_subnode_extract() passing a data-only subnode handle
to acpi_extract_properties() is invalid.
Moreover, a data-only subnode of device A may be represented by an
object located in the scope of device B (which kind of makes sense,
for instance, if A is a B's child). In that case, the scope in
question would be the one of device B. In other words, the scope
mentioned above is the same as the scope used for subnode object
lookup in acpi_nondev_subnode_extract().
Accordingly, rearrange that function to use the same scope for the
extraction of properties and subnode object lookup.
Fixes: 103e10c69c61 ("ACPI: property: Add support for parsing buffer property UUID")
Cc: 6.0+ <stable@vger.kernel.org> # 6.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9338d660b79a0dfe4eb3fe9bd748054cded87d4f ]
When building s390 defconfig with binutils older than 2.32, there are
several warnings during the final linking stage:
s390-linux-ld: .tmp_vmlinux1: warning: allocated section `.got.plt' not in segment
s390-linux-ld: .tmp_vmlinux2: warning: allocated section `.got.plt' not in segment
s390-linux-ld: vmlinux.unstripped: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: vmlinux: warning: allocated section `.got.plt' not in segment
s390-linux-objcopy: st7afZyb: warning: allocated section `.got.plt' not in segment
binutils commit afca762f598 ("S/390: Improve partial relro support for
64 bit") [1] in 2.32 changed where .got.plt is emitted, avoiding the
warning.
The :NONE in the .vmlinux.info output section description changes the
segment for subsequent allocated sections. Move .vmlinux.info right
above the discards section to place all other sections in the previously
defined segment, .data.
Fixes: 30226853d6ec ("s390: vmlinux.lds.S: explicitly handle '.got' and '.plt' sections")
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=afca762f598d453c563f244cd3777715b1a0cb72 [1]
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251008-kbuild-fix-modinfo-regressions-v1-3-9fc776c5887c@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d18ef04f940a8d336fe7915b5ea419c3eb0c0a6 ]
In the upcoming changes, the ELF_DETAILS macro will be extended with
the ".modinfo" section, which will cause an error:
>> s390x-linux-ld: .tmp_vmlinux1: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: .tmp_vmlinux2: warning: allocated section `.modinfo' not in segment
>> s390x-linux-ld: vmlinux.unstripped: warning: allocated section `.modinfo' not in segment
This happens because the .vmlinux.info use :NONE to override the default
segment and tell the linker to not put the section in any segment at all.
To avoid this, we need to change the sections order that will be placed
in the default segment.
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506062053.zbkFBEnJ-lkp@intel.com/
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://patch.msgid.link/20d40a7a3a053ba06a54155e777dcde7fdada1db.1758182101.git.legion@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Stable-dep-of: 9338d660b79a ("s390/vmlinux.lds.S: Move .vmlinux.info to end of allocatable sections")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f375ade6aa9f37fd72d7a78682f639772089eed ]
When unpinning a BPF hash table (htab or htab_lru) that contains internal
structures (timer, workqueue, or task_work) in its values, a BUG warning
is triggered:
BUG: sleeping function called from invalid context at kernel/bpf/hashtab.c:244
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
...
The issue arises from the interaction between BPF object unpinning and
RCU callback mechanisms:
1. BPF object unpinning uses ->free_inode() which schedules cleanup via
call_rcu(), deferring the actual freeing to an RCU callback that
executes within the RCU_SOFTIRQ context.
2. During cleanup of hash tables containing internal structures,
htab_map_free_internal_structs() is invoked, which includes
cond_resched() or cond_resched_rcu() calls to yield the CPU during
potentially long operations.
However, cond_resched() or cond_resched_rcu() cannot be safely called from
atomic RCU softirq context, leading to the BUG warning when attempting
to reschedule.
Fix this by changing from ->free_inode() to ->destroy_inode() and rename
bpf_free_inode() to bpf_destroy_inode() for BPF objects (prog, map, link).
This allows direct inode freeing without RCU callback scheduling,
avoiding the invalid context warning.
Reported-by: Le Chen <tom2cat@sjtu.edu.cn>
Closes: https://lore.kernel.org/all/1444123482.1827743.1750996347470.JavaMail.zimbra@sjtu.edu.cn/
Fixes: 68134668c17f ("bpf: Add map side support for bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-2-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b5f8aa8d4bde0cf3e4595af5a536da337e5f1c78 ]
The slimbus regmap passed to the GPIO driver down from MFD does not use
fast_io. This means a mutex is used for locking and thus this GPIO chip
must not be used in atomic context. Change the can_sleep switch in
struct gpio_chip to true.
Fixes: 59c324683400 ("gpio: wcd934x: Add support to wcd934x gpio controller")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a81236f2cb0882c7ea6c621ce357f7f3f601fe5 ]
The tpm_tis_write8() call specifies arguments in wrong order. Should be
(data, addr, value) not (data, value, addr). The initial correct order
was changed during the major refactoring when the code was split.
Fixes: 41a5e1cf1fe1 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy")
Signed-off-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Justinien Bouron <jbouron@amazon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 057ac50638bcece64b3b436d3a61b70ed6c01a34 ]
EA $LXMOD is required for WSL non-symlink reparse points.
Fixes: ef86ab131d91 ("cifs: Fix querying of WSL CHR and BLK reparse points over SMB1")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b95cd1bdf5aa9221c98fc9259014b8bb8d1829d7 ]
Don't reuse open handle when changing timestamps to prevent the server
from disabling automatic timestamp updates as per MS-FSA 2.1.4.17.
---8<---
import os
import time
filename = '/mnt/foo'
def print_stat(prefix):
st = os.stat(filename)
print(prefix, ': ', time.ctime(st.st_atime), time.ctime(st.st_ctime))
fd = os.open(filename, os.O_CREAT|os.O_TRUNC|os.O_WRONLY, 0o644)
print_stat('old')
os.utime(fd, None)
time.sleep(2)
os.write(fd, b'foo')
os.close(fd)
time.sleep(2)
print_stat('new')
---8<---
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
new : Fri Oct 3 14:01:21 2025 Fri Oct 3 14:01:21 2025
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ python3 run.py
old : Fri Oct 3 17:03:34 2025 Fri Oct 3 17:03:34 2025
new : Fri Oct 3 17:03:36 2025 Fri Oct 3 17:03:36 2025
Fixes: b6f2a0f89d7e ("cifs: for compound requests, use open handle if possible")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cc380d0e1d36b8f2703379890e90f896f68e9e8 ]
The return value of copy_to_iter() function will never be negative,
it is the number of bytes copied, or zero if nothing was copied.
Update the check to treat 0 as an error, and return -1 in that case.
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Acked-by: Tom Talpey <tom@talpey.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6bb73db6948c2de23e407fe1b7ef94bf02b7529f ]
Move the ssize check to the start in essiv_aead_crypt so that
it's also checked for decryption and in-place encryption.
Reported-by: Muhammad Alifa Ramdhan <ramdhan@starlabs.sg>
Fixes: be1eb7f78aa8 ("crypto: essiv - create wrapper template for ESSIV generation")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e84945bdc619ed4243ba4298dbb8ca2062026474 ]
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26d1 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bbf0c98b3ad9edaea1f982de6c199cc11d3b7705 ]
net/bridge/br_private.h:1627 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
7 locks held by socat/410:
#0: ffff88800d7a9c90 (sk_lock-AF_INET){+.+.}-{0:0}, at: inet_stream_connect+0x43/0xa0
#1: ffffffff9a779900 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x62/0x1830
[..]
#6: ffffffff9a779900 (rcu_read_lock){....}-{1:3}, at: nf_hook.constprop.0+0x8a/0x440
Call Trace:
lockdep_rcu_suspicious.cold+0x4f/0xb1
br_vlan_fill_forward_path_pvid+0x32c/0x410 [bridge]
br_fill_forward_path+0x7a/0x4d0 [bridge]
Use to correct helper, non _rcu variant requires RTNL mutex.
Fixes: bcf2766b1377 ("net: bridge: resolve forwarding path for VLAN tag actions in bridge devices")
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f359b809d54c6e3dd1d039b97e0b68390b0e53e4 ]
Referencing a synproxy stateful object from OUTPUT hook causes kernel
crash due to infinite recursive calls:
BUG: TASK stack guard page was hit at 000000008bda5b8c (stack is 000000003ab1c4a5..00000000494d8b12)
[...]
Call Trace:
__find_rr_leaf+0x99/0x230
fib6_table_lookup+0x13b/0x2d0
ip6_pol_route+0xa4/0x400
fib6_rule_lookup+0x156/0x240
ip6_route_output_flags+0xc6/0x150
__nf_ip6_route+0x23/0x50
synproxy_send_tcp_ipv6+0x106/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
nft_synproxy_do_eval+0x263/0x310
nft_do_chain+0x5a8/0x5f0 [nf_tables
nft_do_chain_inet+0x98/0x110
nf_hook_slow+0x43/0xc0
__ip6_local_out+0xf0/0x170
ip6_local_out+0x17/0x70
synproxy_send_tcp_ipv6+0x1a2/0x200
synproxy_send_client_synack_ipv6+0x1aa/0x1f0
[...]
Implement objref and objrefmap expression validate functions.
Currently, only NFT_OBJECT_SYNPROXY object type requires validation.
This will also handle a jump to a chain using a synproxy object from the
OUTPUT hook.
Now when trying to reference a synproxy object in the OUTPUT hook, nft
will produce the following error:
synproxy_crash.nft: Error: Could not process rule: Operation not supported
synproxy name mysynproxy
^^^^^^^^^^^^^^^^^^^^^^^^
Fixes: ee394f96ad75 ("netfilter: nft_synproxy: add synproxy stateful object support")
Reported-by: Georg Pfuetzenreuter <georg.pfuetzenreuter@suse.com>
Closes: https://bugzilla.suse.com/1250237
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7dc87f3448bea5ebe054f14e861074b9c289c65 ]
SCL_SCALER_ENABLE can be used to enable/disable the scaler
on DCE6. Program it to 0 when scaling isn't used, 1 when used.
Additionally, clear some other registers when scaling is
disabled and program the SCL_UPDATE register as recommended.
This fixes visible glitches for users whose BIOS sets up a
mode with scaling at boot, which DC was unable to clean up.
Fixes: b70aaf5586f2 ("drm/amd/display: dce_transform: add DCE6 specific macros,functions")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
