| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
amd-pstate passive mode driver is hyphenated. So make amd-pstate active
mode driver consistent with that rename "amd_pstate_epp" to
"amd-pstate-epp".
Fixes: ffa5096a7c33 ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Cc: All applicable <stable@vger.kernel.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently amd_pstate sets CPPC enable bit in MSR_AMD_CPPC_ENABLE only
for the CPU where the module_init happened. But MSR_AMD_CPPC_ENABLE is
per-socket. This causes CPPC enable bit to set for only one socket for
servers with more than one physical packages. To fix this write
MSR_AMD_CPPC_ENABLE per-socket.
Also, handle duplicate calls for cppc_enable, because it's called from
per-policy/per-core callbacks and can result in duplicate MSR writes.
Before the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
192 0
192 1
After the fix:
amd@amd:~$ sudo rdmsr -a 0xc00102b1 | uniq --count
384 1
Suggested-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If fast_switch_possible flag is set by the scaling driver, the governor
is free to select fast_switch function even if adjust_perf is set. Some
scaling drivers which use adjust_perf don't set fast_switch thinking
that the governor would never fall back to fast_switch. But the governor
can fall back to fast_switch even in runtime if frequency invariance is
disabled due to some reason. This could crash the kernel if the driver
didn't set the fast_switch function pointer.
Therefore, fail driver registration if it has adjust_perf without
fast_switch.
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
|
|
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
and BIOS quirk for HP Spectre x360:
- HP Spectre x360 soundwire DMI quirk
- Error path handling for qcom driver
- Core fix for missing clear of alloc_slave_rt"
* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Add missing clear of alloc_slave_rt
soundwire: qcom: add proper error paths in qcom_swrm_startup()
soundwire: dmi-quirks: add new mapping for HP Spectre x360
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
|
|
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
|
|
Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: use canonical ftrace path
vhost_vdpa: support PACKED when setting-getting vring_base
vhost: support PACKED when setting-getting vring_base
vhost: Fix worker hangs due to missed wake up calls
vhost: Fix crash during early vhost_transport_send_pkt calls
vhost_net: revert upend_idx only on retriable error
vhost_vdpa: tell vqs about the negotiated
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
tools/virtio: Add .gitignore for ringtest
tools/virtio: Fix arm64 ringtest compilation error
vduse: avoid empty string for dev name
vhost: use kzalloc() instead of kmalloc() followed by memset()
|
|
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
|
|
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb9d ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes: 583d6535cb9d ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid ISA-disallowed privilege mappings that can result from
WRITE+EXEC mmap requests from userspace.
- A fix for kfence to handle the huge pages.
- A fix to avoid converting misaligned VAs to huge pages.
- ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe
can understand user pointers.
* tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix kprobe __user string arg print fault issue
riscv: Check the virtual alignment before choosing a map size
riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD
riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Avoid linker error for randomly generated config file that has
CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
and also to commit 4bf3ec384edf ("s390: disable branch profiling for
vdso").
- Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/purgatory: disable branch profiling
s390/cio: unregister device when the only path is gone
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
reviewer for the GPIO subsystem:
- fix a memory corruption bug in gpio-sim
- fix inconsistencies in user-space configuration of gpio-sim
- make Andy Shevchenko a reviewer for the GPIO subsystem"
* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
gpio: sim: quietly ignore configured lines outside the bank
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few spots in tools/virtio still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Message-Id: <20230215223350.2658616-6-zwisler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
|
|
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Use the right structs for PACKED or split vqs when setting and
getting the vring base.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20230424225031.18947-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"
* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Lots of small fixes, and almost all are device-specific.
A few of them are the fixes for the old regressions by the fast kctl
lookups (introduced around 5.19). Others are ASoC simple-card fixes,
selftest compile warning fixes, ASoC AMD quirks, various ASoC codec
fixes as well as usual HD-audio quirks"
* tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform
ALSA: hda: Fix kctl->id initialization
ALSA: gus: Fix kctl->id initialization
ALSA: cmipci: Fix kctl->id initialization
ALSA: ymfpci: Fix kctl->id initialization
ALSA: ice1712,ice1724: fix the kcontrol->id initialization
ALSA: hda/realtek: Add quirk for Clevo NS50AU
ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41
ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256
ALSA: hda/realtek: Add Lenovo P3 Tower platform
ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
selftests: alsa: pcm-test: Fix compiler warnings about the format
ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
ASoC: simple-card-utils: fix PCM constraint error check
ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream()
ASoC: max98363: limit the number of channel to 1
ASoC: max98363: Removed 32bit support
ASoC: mediatek: mt8195: fix use-after-free in driver remove path
ASoC: mediatek: mt8188: fix use-after-free in driver remove path
ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which breaks remounting r/w file systems that
have the quota feature enabled"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: only check dquot_initialize_needed() when debugging
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-current
at24 fixes for v6.4-rc6
- fix a Kconfig issue (we need to select REGMAP, not only REGMAP_I2C)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.4, round 2:
- Fix SPI CS pinmux for the final production version of imx8mn-beacon
board.
- Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board.
- Assign default clock rate for i.MX8 LPUARTs to fix UART failure.
* tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull drm fixes from Dave Airlie:
"Bit busier and a bit more scattered than usual. amdgpu is the main
one, with ivpu and msm having a few fixes, then i915, exynos, ast,
lima, radeon with some misc bits, but overall nothing standing out.
fb-helper:
- Fill in fb-helper vars more correctly
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
i915:
- CDCLK voltage fix for ADL-P
- eDP wake sync pulse fix
- Two error handling fixes to selftests
exynos:
- Fix wrong return in Exynos vidi driver
- Fix use-after-free issue to Exynos g2d driver
ast:
- resume and modeset fixes for ast
ivpu:
- Assorted ivpu fixes
lima:
- lima context destroy fix
msm:
- Fix max segment size to address splat on newer a6xx
- Disable PSR by default w/ modparam to re-enable, since there still
seems to be a lingering issue
- Fix HPD issue
- Fix issue with unitialized GMU mutex"
* tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/msm/a6xx: initialize GMU mutex earlier
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
accel/ivpu: Fix sporadic VPU boot failure
accel/ivpu: Do not use mutex_lock_interruptible
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
drm/amd/display: Reduce sdp bw after urgent to 90%
drm/amdgpu: change reserved vram info print
drm/amdgpu: fix xclk freq on CHIP_STONEY
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
Revert "drm/amdgpu: change the reference clock for raven/raven2"
drm/amd/display: add ODM case when looking for first split pipe
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
drm/amd/pm: Fix power context allocation in SMU13
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
drm/amd: Disallow s0ix without BIOS support again
drm/i915/selftests: Add some missing error propagation
drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few more late fixes for v6.4-rc6
+ Fix max segment size to address splat on newer a6xx
+ Disable PSR by default w/ modparam to re-enable, since there
still seems to be a lingering issue
+ Fix HPD issue
+ Fix issue with unitialized GMU mutex
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGufjVZRNT6YfQ7YUXFC7Cz95wdLF7QHAYkiGfp+3Xc3DQ@mail.gmail.com
|
|
Move GMU mutex initialization earlier to make sure that it is always
initialized. a6xx_destroy can be called from ther failure path before
GMU initialization.
This fixes the following backtrace:
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 0 PID: 58 at kernel/locking/mutex.c:582 __mutex_lock+0x1ec/0x3d0
Modules linked in:
CPU: 0 PID: 58 Comm: kworker/u16:1 Not tainted 6.3.0-rc5-00155-g187c06436519 #565
Hardware name: Qualcomm Technologies, Inc. SM8350 HDK (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __mutex_lock+0x1ec/0x3d0
lr : __mutex_lock+0x1ec/0x3d0
sp : ffff800008993620
x29: ffff800008993620 x28: 0000000000000002 x27: ffff47b253c52800
x26: 0000000001000606 x25: ffff47b240bb2810 x24: fffffffffffffff4
x23: 0000000000000000 x22: ffffc38bba15ac14 x21: 0000000000000002
x20: ffff800008993690 x19: ffff47b2430cc668 x18: fffffffffffe98f0
x17: 6f74616c75676572 x16: 20796d6d75642067 x15: 0000000000000038
x14: 0000000000000000 x13: ffffc38bbba050b8 x12: 0000000000000666
x11: 0000000000000222 x10: ffffc38bbba603e8 x9 : ffffc38bbba050b8
x8 : 00000000ffffefff x7 : ffffc38bbba5d0b8 x6 : 0000000000000222
x5 : 000000000000bff4 x4 : 40000000fffff222 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff47b240cb1880
Call trace:
__mutex_lock+0x1ec/0x3d0
mutex_lock_nested+0x2c/0x38
a6xx_destroy+0xa0/0x138
a6xx_gpu_init+0x41c/0x618
adreno_bind+0x188/0x290
component_bind_all+0x118/0x248
msm_drm_bind+0x1c0/0x670
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa8/0x16c
component_add+0x14/0x20
dsi_dev_attach+0x20/0x2c
dsi_host_attach+0x9c/0x144
devm_mipi_dsi_attach+0x34/0xac
lt9611uxc_attach_dsi.isra.0+0x84/0xfc
lt9611uxc_probe+0x5b8/0x67c
i2c_device_probe+0x1ac/0x358
really_probe+0x148/0x2ac
__driver_probe_device+0x78/0xe0
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x2bc/0x594
worker_thread+0x228/0x438
kthread+0x108/0x10c
ret_from_fork+0x10/0x20
irq event stamp: 299345
hardirqs last enabled at (299345): [<ffffc38bb9ba61e4>] put_cpu_partial+0x1c8/0x22c
hardirqs last disabled at (299344): [<ffffc38bb9ba61dc>] put_cpu_partial+0x1c0/0x22c
softirqs last enabled at (296752): [<ffffc38bb9890434>] _stext+0x434/0x4e8
softirqs last disabled at (296741): [<ffffc38bb989669c>] ____do_softirq+0x10/0x1c
---[ end trace 0000000000000000 ]---
Fixes: 4cd15a3e8b36 ("drm/msm/a6xx: Make GPU destroy a bit safer")
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/531540/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes: cd198caddea7 ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.4-rc6:
- resume and modeset fixes for ast.
- Fill in fb-helper vars more correctly.
- Assorted ivpu fixes.
- lima context destroy fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea6b88ec-b653-3781-0b68-cd0275c27923@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Two fixups
- Fix wrong return in Exynos vidi driver.
- Fix use-after-free issue to Exynos g2d driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607043148.43303-1-inki.dae@samsung.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
CDCLK voltage fix for ADL-P and eDP wake sync pulse fix.
Two error handling fixes to selftests (to appease static checkers)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZIGUHBz7+LsqN2nm@jlahtine-mobl.ger.corp.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.4-2023-06-07:
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230607213740.7723-1-alexander.deucher@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Two tiny arm64 fixes for -rc6.
One fixes a build breakage when MAX_ORDER can be nonsensical if
CONFIG_EXPERT=y and the other fixes the address masking for perf's
page fault software events so that it is consistent amongst them:
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block
arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
|
|
We can race where we have added work to the work_list, but
vhost_task_fn has passed that check but not yet set us into
TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and
just return.
This bug was intoduced in commit f9010dbdce91 ("fork, vhost: Use
CLONE_THREAD to fix freezer/ps regression") when I moved the setting
of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from
logging warnings about being in the wrong state. This moves the setting
of TASK_INTERRUPTIBLE back to before we test if we need to stop the
task to avoid a possible race there as well. We then have vhost_worker
set TASK_RUNNING if it finds work similar to before.
Fixes: f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we
can race where:
1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue
2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create.
3. vhost_worker_create will set the dev->worker pointer before setting
the worker->vtsk pointer.
4. thread0's vhost_work_queue will see the dev->worker pointer is
set and try to call vhost_task_wake using not yet set worker->vtsk
pointer.
5. We then crash since vtsk is NULL.
Before commit 6e890c5d5021 ("vhost: use vhost_tasks for worker
threads"), we only had the worker pointer so we could just check it to
see if VHOST_SET_OWNER has been done. After that commit we have the
vhost_worker and vhost_task pointer, so we can now hit the bug above.
This patch embeds the vhost_worker in the vhost_dev and moves the work
list initialization back to vhost_dev_init, so we can just check the
worker.vtsk pointer to check if VHOST_SET_OWNER has been done like
before.
Fixes: 6e890c5d5021 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Fix possible virtqueue used buffers leak and corresponding stuck
in case of temporary -EIO from sendmsg() which is produced by
tun driver while backend device is not up.
In case of no-retriable error and zcopy do not revert upend_idx
to pass packet data (that is update used_idx in corresponding
vhost_zerocopy_signal_used()) as if packet data has been
transferred successfully.
v2: set vq->heads[ubuf->desc].len equal to VHOST_DMA_DONE_LEN
in case of fake successful transmit.
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Message-Id: <20230424204411.24888-1-asmetanin@yandex-team.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andrey Smetanin <asmetanin@yandex-team.ru>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
As is done in the net, iscsi, and vsock vhost support, let the vdpa vqs
know about the features that have been negotiated. This allows vhost
to more safely make decisions based on the features, such as when using
PACKED vs split queues.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230424225031.18947-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently the vdpa device is unregistered after the workqueue that
processes vq commands is disabled. However, the device unregister
process can still send commands to the cvq (a vlan delete for example)
which leads to a hang because the handing workqueue has been disabled
and the command never finishes:
[ 2263.095764] rcu: INFO: rcu_sched self-detected stall on CPU
[ 2263.096307] rcu: 9-....: (5250 ticks this GP) idle=dac4/1/0x4000000000000000 softirq=111009/111009 fqs=2544
[ 2263.097154] rcu: (t=5251 jiffies g=393549 q=347 ncpus=10)
[ 2263.097648] CPU: 9 PID: 94300 Comm: kworker/u20:2 Not tainted 6.3.0-rc6_for_upstream_min_debug_2023_04_14_00_02 #1
[ 2263.098535] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2263.099481] Workqueue: mlx5_events mlx5_vhca_state_work_handler [mlx5_core]
[ 2263.100143] RIP: 0010:virtnet_send_command+0x109/0x170
[ 2263.100621] Code: 1d df f5 ff 85 c0 78 5c 48 8b 7b 08 e8 d0 c5 f5 ff 84 c0 75 11 eb 22 48 8b 7b 08 e8 01 b7 f5 ff 84 c0 75 15 f3 90 48 8b 7b 08 <48> 8d 74 24 04 e8 8d c5 f5 ff 48 85 c0 74 de 48 8b 83 f8 00 00 00
[ 2263.102148] RSP: 0018:ffff888139cf36e8 EFLAGS: 00000246
[ 2263.102624] RAX: 0000000000000000 RBX: ffff888166bea940 RCX: 0000000000000001
[ 2263.103244] RDX: 0000000000000000 RSI: ffff888139cf36ec RDI: ffff888146763800
[ 2263.103864] RBP: ffff888139cf3710 R08: ffff88810d201000 R09: 0000000000000000
[ 2263.104473] R10: 0000000000000002 R11: 0000000000000003 R12: 0000000000000002
[ 2263.105082] R13: 0000000000000002 R14: ffff888114528400 R15: ffff888166bea000
[ 2263.105689] FS: 0000000000000000(0000) GS:ffff88852cc80000(0000) knlGS:0000000000000000
[ 2263.106404] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2263.106925] CR2: 00007f31f394b000 CR3: 000000010615b006 CR4: 0000000000370ea0
[ 2263.107542] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2263.108163] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2263.108769] Call Trace:
[ 2263.109059] <TASK>
[ 2263.109320] ? check_preempt_wakeup+0x11f/0x230
[ 2263.109750] virtnet_vlan_rx_kill_vid+0x5a/0xa0
[ 2263.110180] vlan_vid_del+0x9c/0x170
[ 2263.110546] vlan_device_event+0x351/0x760 [8021q]
[ 2263.111004] raw_notifier_call_chain+0x41/0x60
[ 2263.111426] dev_close_many+0xcb/0x120
[ 2263.111808] unregister_netdevice_many_notify+0x130/0x770
[ 2263.112297] ? wq_worker_running+0xa/0x30
[ 2263.112688] unregister_netdevice_queue+0x89/0xc0
[ 2263.113128] unregister_netdev+0x18/0x20
[ 2263.113512] virtnet_remove+0x4f/0x230
[ 2263.113885] virtio_dev_remove+0x31/0x70
[ 2263.114273] device_release_driver_internal+0x18f/0x1f0
[ 2263.114746] bus_remove_device+0xc6/0x130
[ 2263.115146] device_del+0x173/0x3c0
[ 2263.115502] ? kernfs_find_ns+0x35/0xd0
[ 2263.115895] device_unregister+0x1a/0x60
[ 2263.116279] unregister_virtio_device+0x11/0x20
[ 2263.116706] device_release_driver_internal+0x18f/0x1f0
[ 2263.117182] bus_remove_device+0xc6/0x130
[ 2263.117576] device_del+0x173/0x3c0
[ 2263.117929] ? vdpa_dev_remove+0x20/0x20 [vdpa]
[ 2263.118364] device_unregister+0x1a/0x60
[ 2263.118752] mlx5_vdpa_dev_del+0x4c/0x80 [mlx5_vdpa]
[ 2263.119232] vdpa_match_remove+0x21/0x30 [vdpa]
[ 2263.119663] bus_for_each_dev+0x71/0xc0
[ 2263.120054] vdpa_mgmtdev_unregister+0x57/0x70 [vdpa]
[ 2263.120520] mlx5v_remove+0x12/0x20 [mlx5_vdpa]
[ 2263.120953] auxiliary_bus_remove+0x18/0x30
[ 2263.121356] device_release_driver_internal+0x18f/0x1f0
[ 2263.121830] bus_remove_device+0xc6/0x130
[ 2263.122223] device_del+0x173/0x3c0
[ 2263.122581] ? devl_param_driverinit_value_get+0x29/0x90
[ 2263.123070] mlx5_rescan_drivers_locked+0xc4/0x2d0 [mlx5_core]
[ 2263.123633] mlx5_unregister_device+0x54/0x80 [mlx5_core]
[ 2263.124169] mlx5_uninit_one+0x54/0x150 [mlx5_core]
[ 2263.124656] mlx5_sf_dev_remove+0x45/0x90 [mlx5_core]
[ 2263.125153] auxiliary_bus_remove+0x18/0x30
[ 2263.125560] device_release_driver_internal+0x18f/0x1f0
[ 2263.126052] bus_remove_device+0xc6/0x130
[ 2263.126451] device_del+0x173/0x3c0
[ 2263.126815] mlx5_sf_dev_remove+0x39/0xf0 [mlx5_core]
[ 2263.127318] mlx5_sf_dev_state_change_handler+0x178/0x270 [mlx5_core]
[ 2263.127920] blocking_notifier_call_chain+0x5a/0x80
[ 2263.128379] mlx5_vhca_state_work_handler+0x151/0x200 [mlx5_core]
[ 2263.128951] process_one_work+0x1bb/0x3c0
[ 2263.129355] ? process_one_work+0x3c0/0x3c0
[ 2263.129766] worker_thread+0x4d/0x3c0
[ 2263.130140] ? process_one_work+0x3c0/0x3c0
[ 2263.130548] kthread+0xb9/0xe0
[ 2263.130895] ? kthread_complete_and_exit+0x20/0x20
[ 2263.131349] ret_from_fork+0x1f/0x30
[ 2263.131717] </TASK>
The fix is to disable and destroy the workqueue after the device
unregister. It is expected that vhost will not trigger kicks after
the unregister. But even if it would, the wq is disabled already by
setting the pointer to NULL (done so in the referenced commit).
Fixes: ad6dc1daaf29 ("vdpa/mlx5: Avoid processing works if workqueue was destroyed")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <20230516095800.3549932-1-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Ignore executables for ringtest.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_C121802C93CB4095C6D7D95113442E830A07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.
Compilation error as follows, avoid __always_inline undefined.
$ make
cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
In file included from ring.c:10:
main.h: In function ‘busy_wait’:
main.h:99:21: warning: implicit declaration of function ‘assert’
[-Wimplicit-function-declaration]
99 | #define cpu_relax() assert(0)
| ^~~~~~
main.h:107:17: note: in expansion of macro ‘cpu_relax’
107 | cpu_relax();
| ^~~~~~~~~
main.h:12:1: note: ‘assert’ is defined in header ‘<assert.h>’; did you
forget to ‘#include <assert.h>’?
11 | #include <stdbool.h>
+++ |+#include <assert.h>
12 |
main.h: At top level:
main.h:143:23: error: expected ‘;’ before ‘void’
143 | static __always_inline
| ^
| ;
144 | void __read_once_size(const volatile void *p, void *res, int
size)
| ~~~~
main.h:158:23: error: expected ‘;’ before ‘void’
158 | static __always_inline void __write_once_size(volatile void *p,
void *res, int size)
| ^~~~~
| ;
make: *** [<builtin>: ring.o] Error 1
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Syzkaller hits a kernel WARN when the first character of the dev name
provided is NULL. Solution is to add a NULL check before calling
cdev_device_add() in vduse_create_dev().
kobject: (0000000072042169): attempted to be registered with empty name!
WARNING: CPU: 0 PID: 112695 at lib/kobject.c:236
Call Trace:
kobject_add_varg linux/src/lib/kobject.c:390 [inline]
kobject_add+0xf6/0x150 linux/src/lib/kobject.c:442
device_add+0x28f/0xc20 linux/src/drivers/base/core.c:2167
cdev_device_add+0x83/0xc0 linux/src/fs/char_dev.c:546
vduse_create_dev linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2254 [inline]
vduse_ioctl+0x7b5/0xf30 linux/src/drivers/vdpa/vdpa_user/vduse_dev.c:2316
vfs_ioctl linux/src/fs/ioctl.c:47 [inline]
file_ioctl linux/src/fs/ioctl.c:510 [inline]
do_vfs_ioctl+0x14b/0xa80 linux/src/fs/ioctl.c:697
ksys_ioctl+0x7c/0xa0 linux/src/fs/ioctl.c:714
__do_sys_ioctl linux/src/fs/ioctl.c:721 [inline]
__se_sys_ioctl linux/src/fs/ioctl.c:719 [inline]
__x64_sys_ioctl+0x42/0x50 linux/src/fs/ioctl.c:719
do_syscall_64+0x94/0x330 linux/src/arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: "Xie Yongji" <xieyongji@bytedance.com>
Reported-by: Xianjun Zeng <zengxianjun@bytedance.com>
Signed-off-by: Sheng Zhao <sheng.zhao@bytedance.com>
Message-Id: <20230530033626.1266794-1-sheng.zhao@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Cc: "Michael S. Tsirkin"<mst@redhat.com>, "Jason Wang"<jasowang@redhat.com>,
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
|
|
Add the MAINTAINERS entries for the Renesas RZ/V2M I2C driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
On riscv qemu platform, when add kprobe event on do_sys_open() to show
filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3
mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE,
the +0($arg2) addr is processed as a kernel address though it is a
userspace address, cause the above filename=(fault) print. So select
ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the
kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84)
dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/"
flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Acked-by: Björn Töpel <bjorn@rivosinc.com>
Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work")
Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, wifi, netfilter, bluetooth and ebpf.
Current release - regressions:
- bpf: sockmap: avoid potential NULL dereference in
sk_psock_verdict_data_ready()
- wifi: iwlwifi: fix -Warray-bounds bug in iwl_mvm_wait_d3_notif()
- phylink: actually fix ksettings_set() ethtool call
- eth: dwmac-qcom-ethqos: fix a regression on EMAC < 3
Current release - new code bugs:
- wifi: mt76: fix possible NULL pointer dereference in
mt7996_mac_write_txwi()
Previous releases - regressions:
- netfilter: fix NULL pointer dereference in nf_confirm_cthelper
- wifi: rtw88/rtw89: correct PS calculation for SUPPORTS_DYNAMIC_PS
- openvswitch: fix upcall counter access before allocation
- bluetooth:
- fix use-after-free in hci_remove_ltk/hci_remove_irk
- fix l2cap_disconnect_req deadlock
- nic: bnxt_en: prevent kernel panic when receiving unexpected
PHC_UPDATE event
Previous releases - always broken:
- core: annotate rfs lockless accesses
- sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
- netfilter: add null check for nla_nest_start_noflag() in
nft_dump_basechain_hook()
- bpf: fix UAF in task local storage
- ipv4: ping_group_range: allow GID from 2147483648 to 4294967294
- ipv6: rpl: fix route of death.
- tcp: gso: really support BIG TCP
- mptcp: fixes for user-space PM address advertisement
- smc: avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT
- can: avoid possible use-after-free when j1939_can_rx_register fails
- batman-adv: fix UaF while rescheduling delayed work
- eth: qede: fix scheduling while atomic
- eth: ice: make writes to /dev/gnssX synchronous"
* tag 'net-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
bnxt_en: Prevent kernel panic when receiving unexpected PHC_UPDATE event
bnxt_en: Skip firmware fatal error recovery if chip is not accessible
bnxt_en: Query default VLAN before VNIC setup on a VF
bnxt_en: Don't issue AP reset during ethtool's reset operation
bnxt_en: Fix bnxt_hwrm_update_rss_hash_cfg()
net: bcmgenet: Fix EEE implementation
eth: ixgbe: fix the wake condition
eth: bnxt: fix the wake condition
lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
bpf: Add extra path pointer check to d_path helper
net: sched: fix possible refcount leak in tc_chain_tmplt_add()
net: sched: act_police: fix sparse errors in tcf_police_dump()
net: openvswitch: fix upcall counter access before allocation
net: sched: move rtm_tca_policy declaration to include file
ice: make writes to /dev/gnssX synchronous
net: sched: add rcu annotations around qdisc->qdisc_sleeping
rfs: annotate lockless accesses to RFS sock flow table
rfs: annotate lockless accesses to sk->sk_rxhash
virtio_net: use control_buf for coalesce params
...
|
|
Pull xfs fixes from Dave Chinner:
"These are a set of regression fixes discovered on recent kernels. I
was hoping to send this to you a week and half ago, but events out of
my control delayed finalising the changes until early this week.
Whilst the diffstat looks large for this stage of the merge window, a
large chunk of it comes from moving the guts of one function from one
file to another i.e. it's the same code, it is just run in a different
context where it is safe to hold a specific lock. Otherwise the
individual changes are relatively small and straigtht forward.
Summary:
- Propagate unlinked inode list corruption back up to log recovery
(regression fix)
- improve corruption detection for AGFL entries, AGFL indexes and
XEFI extents (syzkaller fuzzer oops report)
- Avoid double perag reference release (regression fix)
- Improve extent merging detection in scrub (regression fix)
- Fix a new undefined high bit shift (regression fix)
- Fix for AGF vs inode cluster buffer deadlock (regression fix)"
* tag 'xfs-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: collect errors from inodegc for unlinked inode recovery
xfs: validate block number being freed before adding to xefi
xfs: validity check agbnos on the AGFL
xfs: fix agf/agfl verification on v4 filesystems
xfs: fix double xfs_perag_rele() in xfs_filestream_pick_ag()
xfs: fix broken logic when detecting mergeable bmap records
xfs: Fix undefined behavior of shift into sign bit
xfs: fix AGF vs inode cluster buffer deadlock
xfs: defered work could create precommits
xfs: restore allocation trylock iteration
xfs: buffer pins need to hold a buffer reference
|
|
ext4_xattr_block_set() relies on its caller to call dquot_initialize()
on the inode. To assure that this has happened there are WARN_ON
checks. Unfortunately, this is subject to false positives if there is
an antagonist thread which is flipping the file system at high rates
between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is
enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
re-enabled"
This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes: f3016b891c8c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
This patchset has the following fixes for bnxt_en:
1. Add missing VNIC ID parameter in the FW message when getting an
updated RSS configuration from the FW.
2. Fix a warning when doing ethtool reset on newer chips.
3. Fix VLAN issue on a VF when a default VLAN is assigned.
4. Fix a problem during DPC (Downstream Port containment) scenario.
5. Fix a NULL pointer dereference when receiving a PTP event from FW.
6. Fix VXLAN/Geneve UDP port delete/add with newer FW.
====================
Link: https://lore.kernel.org/r/20230607075409.228450-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
