summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-05-29net: remove unnecessary genlmsg_cancel() callsYueHaibing6-26/+0
the message be freed immediately, no need to trim it back to the previous size. Inspired by commit 7a9b3ec1e19f ("nl80211: remove unnecessary genlmsg_cancel() calls") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: bpfilter: make function bpfilter_mbox_request() staticWei Yongjun1-2/+3
Fixes the following sparse warnings: net/ipv4/bpfilter/sockopt.c:13:5: warning: symbol 'bpfilter_mbox_request' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge branch 'nfp-abm-RED-MQ-qdisc-offload'David S. Miller16-16/+843
Jakub Kicinski says: ==================== nfp: abm: RED/MQ qdisc offload This is second batch of advanced buffer management nfp driver changes. This series adds the qdisc offload. Support for a very simple subset of RED qdisc offload is added as needed for DCTCP ECN marking (min and max thresholds set to the same value). The first two patches fix glitches introduced by the previous series. We have to be careful about phys_port_name handling, because VFs share the same code path, and some user space may get confused by the names we chose. Since unlike previous offloads we can report the queue backlog both in bytes and packets we need to adjust how statistics are added up in the core (patch 6). There are some extra statistics we want to expose which don't fit into TC stats, namely counts of packets which have been fast- -forwarded without getting enqueued because there was no contention and number of packets that were ever queued (sum of all momentary backlogs). We expose those through ethtool stats (patches 8 and 9). Remaining 5 patches add MQ offload - to be able to set different configurations on different queues. Representors are made multi- -queue and we add offload support to MQ. MQ stats are added up before calling ->dump qdiscs on the children, and therefore don't include updated offload values. To avoid clearly incorrect stats MQ is made to also request stats update from offloads. This way we can correct the diff at the driver level. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report correct MQ statsJakub Kicinski1-0/+24
Report the stat diff to make sure MQ stats add up to child stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: sched: mq: request stats from offloadsJakub Kicinski2-0/+20
MQ doesn't hold any statistics on its own, however, statistic from offloads are requested starting from the root, hence MQ will read the old values for its sums. Call into the drivers, because of the additive nature of the stats drivers are aware of how much "pending updates" they have to children of the MQ. Since MQ reset its stats on every dump we can simply offset the stats, predicting how stats of offloaded children will change. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: multi-queue RED offloadJakub Kicinski3-48/+208
Add support for MQ offload and setting RED parameters on queue-by-queue basis. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: sched: mq: add simple offload notificationJakub Kicinski3-0/+30
mq offload is trivial, we just need to let the device know that the root qdisc is mq. Alternative approach would be to export qdisc_lookup() and make drivers check the root type themselves, but notification via ndo_setup_tc is more in line with other qdiscs. Note that mq doesn't hold any stats on it's own, it just adds up stats of its children. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose all PF queuesJakub Kicinski3-6/+16
Allocate the PF representor as multi-queue to allow setting the configuration per-queue. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: expose the internal stats in ethtoolJakub Kicinski3-0/+75
There is a handful of statistics exposing some internal details of the implementation. Expose those via ethtool. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: allow apps to add extra stats to portsJakub Kicinski4-2/+45
Allow nfp apps to add extra ethtool stats. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: report statistics from RED offloadJakub Kicinski3-0/+244
Report basic and extended RED statistics back to TC. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: sched: add qstats.qlen to qlenJakub Kicinski1-2/+2
AFAICT struct gnet_stats_queue.qlen is not used in Qdiscs. It may, however, be useful for offloads to report HW queue length there. Add that value to the result of qdisc_qlen_sum(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add simple RED offloadJakub Kicinski2-0/+92
Offload simple RED configurations. For now support only DCTCP like scenarios where min and max are the same. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: add helpers for configuring queue marking levelsJakub Kicinski3-0/+88
Queue levels for simple ECN marking are stored in _abi_nfd_out_q_lvls_X symbol, where X is the PCIe PF id. Find out the location of that symbol and add helpers for modifying it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: abm: enable advanced queuing on demandJakub Kicinski4-0/+40
ABM NIC FW has a cut-through mode where the PCIe queuing is bypassed, thus working like our standard NIC FWs. Use this mode by default and only enable queuing in switchdev mode where users can configure it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: prefix vNIC phys_port_name with 'n'Jakub Kicinski1-1/+1
Some drivers are using a bare number inside phys_port_name as VF id and OpenStack's regexps will pick it up. We can't use a bare number for your vNICs, prefix the names with 'n'. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29nfp: return -EOPNOTSUPP from .ndo_get_phys_port_name for VFsJakub Kicinski1-5/+6
After recent change we started returning 0 from ndo_get_phys_port_name for VFs. The name parameter for ndo_get_phys_port_name is not initialized by the stack so this can lead to a crash. We should have kept returning -EOPNOTSUPP in the first place. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge tag 'mlx5e-updates-2018-05-25' of ↵David S. Miller21-387/+724
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-05-25 This series includes updates for mlx5e netdev driver. 1) Allowr flow based VF vport mirroring under sriov switchdev scheme, added support for offloading the TC mirred mirror sub-action, from Chris Mi. ================= From: Or Gerlitz <ogerlitz@mellanox.com> The user will typically set the actions order such that the mirror port (mirror VF) sees packets as the original port (VF under mirroring) sent them or as it will receive them. In the general case, it means that packets are potentially sent to the mirror port before or after some actions were applied on them. To properly do that, we follow on the exact action order as set for the flow and make sure this will also be the case when we program the HW offload. If all the actions should apply before forwarding to the mirror and dest port, mirroring is just multicasting to the two vports. Otherwise, we split the TC flow to two HW rules, where the 1st applies only the actions needed up to the mirror (if there are such) and the 2nd the rest of the actions plus the forwarding to the dest vport. ================= 2) Move to order-0 only allocations (using fragmented work queues) for all work queues used by the driver, RX and TX descriptor rings (RQs, SQs and Completion Queues (CQs)), from Tariq Toukan. 3) Avoid resetting netdevice statistics on netdevice state changes, from Eran Ben Elisha. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29bpfilter: fix building without CONFIG_INETArnd Bergmann1-2/+5
bpfilter_process_sockopt is a callback that gets called from ip_setsockopt() and ip_getsockopt(). However, when CONFIG_INET is disabled, it never gets called at all, and assigning a function to the callback pointer results in a link failure: net/bpfilter/bpfilter_kern.o: In function `__stop_umh': bpfilter_kern.c:(.text.unlikely+0x3): undefined reference to `bpfilter_process_sockopt' net/bpfilter/bpfilter_kern.o: In function `load_umh': bpfilter_kern.c:(.init.text+0x73): undefined reference to `bpfilter_process_sockopt' Since there is no caller in this configuration, I assume we can simply make the assignment conditional. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge branch 'hns3-next'David S. Miller10-207/+283
Salil Mehta says: ==================== Misc. bug fixes & some minor additions to HNS3 driver This patch-set provides some bug fixes figured out during testing and review. It also provides some additions due to running of the existing code on the new revision of the HNS3 hardware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes initalization of RoCE handle and makes it conditionalLijun Ou1-3/+5
When register a RoCE client with hnae3vf device, it needs to judge the device whether support RoCE vf function. Otherwise, it will lead to calltrace when RoCE is not support vf function and remove roce device. The calltrace as follows: [ 93.156614] Unable to handle kernel NULL pointer dereference at virtual address 00000015 <SNIP> [ 93.278784] Call trace: [ 93.278788] hnae3_match_n_instantiate+0x24/0xd8 [hnae3] [ 93.278790] hnae3_register_client+0xcc/0x150 [hnae3] [ 93.278801] hns_roce_hw_v2_init+0x18/0x1000 [hns_roce_hw_v2] [ 93.278805] do_one_initcall+0x58/0x160 [ 93.278807] do_init_module+0x64/0x1d8 [ 93.278809] load_module+0x135c/0x15c8 [ 93.278811] SyS_finit_module+0x100/0x118 [ 93.278816] __sys_trace_return+0x0/0x4 [ 93.278827] Code: aa0003f5 12001c56 aa1e03e0 d503201f (b9402660) Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Reported-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reported-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Adds support for led locate command for copper portJian Shen2-41/+6
Firmware now supports control of all leds. Existing HNS3 driver code only supported led locate command over SFP Fibre ports. But now it is also supported over copper port. This patch removes existing not needed code for the led locate command and updates the led control command between driver and firmware. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Remove unused led control codeJian Shen3-112/+0
In the previous implementation of led control for fibre port , parses the port speed configuration, checks the link status and traffic status per second, and updates the blink status of link led, traffic led and speed led. Now, the firmware takes responsibility to handle the led, the dirver just needs to deal with locate command. So the codes for link led, traffic led and speed led are useless now. This patch removes these redundant codes. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Clear TX/RX rings when stopping port & un-initializing clientFuyun Liang3-10/+110
When we down the port, some packets are left in TX/RX buffer. When we up the port again, these old packets are forwarded to protocol stack or are sent to internet. It will make some problem. TX/RX buffer should be cleared when stopping port. This patch adds some function to ensure the buffer is clean when port is started. We should clear the rings when clients are being un-initialized as well. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Removes unnecessary check when clearing TX/RX ringsFuyun Liang1-6/+0
Our code will ensure that hns3_clear_tx_ring is not used to cleared RX rings and hns3_clear_rx_ring is not used to cleared TX rings. So the ring type check is unnecessary. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes the init of the VALID BD info in the descriptorFuyun Liang1-0/+2
RX Buffer Descriptor contains a VALID bit which indicates if the BD is valid and has some data. This field is set by HNS3 hardware to intimate the driver of some valid data present in the BD. nd should be reset by the driver when BD is being used again. In the existing code this bit was not being (re-)initialized properly and hence was causing problems. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fixes the state to indicate client-type initializationPeng Li2-4/+49
HNAE3 module supports kernel nic driver, user nic driver and roce driver, and there are 3 client types. Driver uses one bit(HNAE3_CLIENT_INITED_B) to indicate the client initialization state, it will cause confusion for 3 client types. This patch fixes it by use 3 bits to indicate the initialization state. Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Fix for PF mailbox receving unknown messageXi Wang1-3/+20
Before the firmware updates the crq's tail pointer, if the PF driver reads the data in the crq, the data may be incomplete at this time, which will lead to the driver read an unknown message. This patch fixes it by checking if crq is not empty before reading the message. Fixes: c1a81619d73a ("net: hns3: Add mailbox interrupt handling to PF driver") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add support to enable TX/RX promisc mode for H/W rev(0x21)Peng Li2-1/+10
HCLGE_PROMISC_TX_EN_B and HCLGE_PROMISC_RX_EN_B are not supported on pdev revision(0x20), new revision(0x21) supports them. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add STRP_TAGP field support for hardware revision 0x21Peng Li2-5/+40
Hardware Revision(0x21) Buffer Descriptor adds a field STRP_TAGP for vlan stripped processed indication. STRP_TAGP field has 2 bits, bit 0 is stripped indication of the vlan tag in outer vlan tag field, bit 1 is stripped indication of the vlan tag in inner vlan tag field. For each bit, 0 indicates the tag is not stripped and 1 indicates the tag is stripped. This patch adds STRP_TAGP support for revision(0x21), and does not change the revision(0x20) action. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Add support for tx_accept_tag2 and tx_accept_untag2 configPeng Li3-10/+29
HNS3 Hardware can support up to two VLAN tags in transmit leg, the PPP module can handle the packets based on the tag1 and tag2 config. This patch adds support for tag2 config for vlan handling Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: hns3: Updates RX packet info fetch in case of multi BDPeng Li1-18/+18
In the latest revision of the hardware, if a packet is spanning across multiple BDs then only VLD bit and current data size info is valid in each BD, and rest of the information is only valid in the last BD of the packet. In such case we should make sure we are fetching RX packet size from the first descriptor and information like VLAN should be fetched from last BD. Signed-off-by: Peng Li <lipeng321@huawei.com> Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: sched: shrink struct QdiscPaolo Abeni1-2/+2
The struct Qdisc has a lot of holes, especially after commit a53851e2c321 ("net: sched: explicit locking in gso_cpu fallback"), which as a side effect, moved the fields just after 'busylock' on a new cacheline. Since both 'padded' and 'refcnt' are not updated frequently, and there is a hole before 'gso_skb', we can move such fields there, saving a cacheline without any performance side effect. Before this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 384, cachelines: 6, members: 25 */ /* sum members: 236, holes: 3, sum holes: 92 */ /* padding: 56 */ After this commit: pahole -C Qdisc net/sche/sch_generic.o # ... /* size: 320, cachelines: 5, members: 25 */ /* sum members: 236, holes: 2, sum holes: 28 */ /* padding: 56 */ Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device IDBjørn Mork1-1/+1
SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a771b30 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by: Sebastian Sjoholm <sebastian.sjoholm@gmail.com> Cc: Reinhard Speyerer <rspmn@arcor.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge branch 'stmmac-add-support-for-stm32mp1'David S. Miller5-18/+284
Christophe Roullier says: ==================== net: ethernet: stmmac: add support for stm32mp1 Patches to have Ethernet support on stm32mp1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29dt-bindings: stm32: add compatible for sysconChristophe Roullier2-0/+14
This patch describes syscon DT bindings. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: stmmac: add dwmac-4.20a compatibleChristophe Roullier1-1/+2
Manage dwmac-4.20a version from synopsys Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29dt-bindings: stm32-dwmac: add support of MPU familiesChristophe Roullier1-2/+16
Add description for Ethernet MPU families fields Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: ethernet: stmmac: add adaptation for stm32mp157c.Christophe Roullier1-15/+252
Glue codes to support stm32mp157c device and stay compatible with stm32 mcu familly Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29dt-bindings: ptp: add ptp-qoriq.txtYangbo Lu2-67/+70
This patch is to add a documentation for ptp_qoriq dt-bindings. The description for ptp_qoriq dt-bindings was actually moved from Documentation/devicetree/bindings/net/fsl-tsec-phy.txt, since gianfar_ptp driver was moved to ptp_qoriq driver. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: ethernet: gianfar_ethtool: get phc index through drvdataYangbo Lu2-8/+18
Global variable gfar_phc_index was used to get and store phc index through gianfar_ptp driver. However gianfar_ptp had been renamed as ptp_qoriq for QorIQ common PTP driver. This gfar_phc_index doesn't work any more, and the phc index is stored in drvdata now. This patch is to support getting phc index through ptp_qoriq drvdata. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29ptp_qoriq: move some definitions to header fileYangbo Lu2-131/+142
This patch is to move some definitions in ptp_qoriq.c to the header file. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29ptp: rework gianfar_ptp as QorIQ common PTP driverYangbo Lu4-162/+174
gianfar_ptp was the PTP clock driver for 1588 timer module of Freescale QorIQ eTSEC (Enhanced Three-Speed Ethernet Controllers) platforms. Actually QorIQ DPAA (Data Path Acceleration Architecture) platforms is also using the same 1588 timer module in hardware. This patch is to rework gianfar_ptp as QorIQ common PTP driver to support both DPAA and eTSEC. Moved gianfar_ptp.c to drivers/ptp/, renamed it as ptp_qoriq.c, and renamed many variables. There were not any function changes. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29ifb: fix packets checksumJon Maxwell1-1/+1
Fixup the checksum for CHECKSUM_COMPLETE when pulling skbs on RX path. Otherwise we get splats when tc mirred is used to redirect packets to ifb. Before fix: nic: hw csum failure Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: phy: realtek: add suspend/resume callbacks for RTL8211BHeiner Kallweit1-0/+16
Add RTL8211B suspend / resume callbacks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29Merge branch 'Enable-virtio_net-to-act-as-a-standby-for-a-passthru-device'David S. Miller17-167/+1522
Sridhar Samudrala says: ==================== Enable virtio_net to act as a standby for a passthru device The main motivation for this patch is to enable cloud service providers to provide an accelerated datapath to virtio-net enabled VMs in a transparent manner with no/minimal guest userspace changes. This also enables hypervisor controlled live migration to be supported with VMs that have direct attached SR-IOV VF devices. Patch 1 introduces a failover module that provides a generic interface for paravirtual drivers to listen for netdev register/unregister/link change events from pci ethernet devices with the same MAC and takeover their datapath. The notifier and event handling code is based on the existing netvsc implementation. Patch 2 refactors netvsc to use the registration/notification framework introduced by failover module. Patch 3 introduces a net_failover driver that provides an automated failover mechanism to paravirtual drivers via APIs to create and destroy a failover master netdev and mananges a primary and standby slave netdevs that get registered via the generic failover infrastructure. Patch 4 introduces a new feature bit VIRTIO_NET_F_STANDBY to virtio-net that can be used by hypervisor to indicate that virtio_net interface should act as a standby for another device with the same MAC address. Patch 5 extends virtio_net to use alternate datapath when available and registered. When STANDBY feature is enabled, virtio_net driver uese the net_failover API to create an additional 'failover' netdev that acts as a master device and controls 2 slave devices. The original virtio_net netdev is registered as 'standby' netdev and a passthru/vf device with the same MAC gets registered as 'primary' netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. As this patch series is initially focusing on usecases where hypervisor fully controls the VM networking and the guest is not expected to directly configure any hardware settings, it doesn't expose all the ndo/ethtool ops that are supported by virtio_net at this time. To support additional usecases, it should be possible to enable additional ops later by caching the state in failover netdev and replaying when the 'primary' netdev gets registered. At the time of live migration, the hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 v12: - Tested live migration with virtio-net/AVF(i40evf) configured in failover mode while running iperf in background. Tried static ip and dhcp configurations using 'network' scripts and Network Manager. - Build tested netvsc module. Updates: - Extended generic failover module to do common functions like setting FAILOVER_SLAVE flag, registering rx-handler and linking to upper dev in the generic register/unregister handlers. This required adding 3 additional failover ops pre_register, pre_unregister and handle_frame. netvsc and net_failover drivers are updated to support these ops. v11: - Split net_failover module into 2 components. 1. 'failover' module that provides generic failover infrastructure to register a failover instance and listen for slave events. 2. 'net_failover' driver that provides APIs to create/destroy upper netdev and supports 3-netdev model used by virtio-net. - Added documentation v10: - fix net_failover_open() to update failover CARRIER correctly based on standby and primary states. - fix net_failover_handle_frame() to handle frames received on standby when primary is present. - replace netdev_upper_dev_link with netdev_master_upper_dev_link and handle lower dev state changes. - fix net_failver_create() and net_failover_register() interfaces to use ERR_PTR and avoid arg ** - disable setting mac address when virtio-net in STANDBY mode - document exported symbols - added entry to MAINTAINERS file v9: Select NET_FAILOVER automatically when VIRTIO_NET/HYPERV_NET are enabled. (stephen) v8: - Made the failover managment routines more robust by updating the feature bits/other fields in the failover netdev when slave netdevs are registered/unregistered. (mst) - added support for handling vlans. - Limited the changes in netvsc to only use the notifier/event/lookups from the failover module. The slave register/unregister/link-change handlers are only updated to use the getbymac routine to get the upper netdev. There is no change in their functionality. (stephen) - renamed structs/function/file names to use net_failover prefix. (mst) v7 - Rename 'bypass/active/backup' terminology with 'failover/primary/standy' (jiri, mst) - re-arranged dev_open() and dev_set_mtu() calls in the register routines so that they don't get called for 2-netdev model. (stephen) - fixed select_queue() routine to do queue selection based on VF if it is registered as primary. (stephen) - minor bugfixes v6 RFC: Simplified virtio_net changes by moving all the ndo_ops of the bypass_netdev and create/destroy of bypass_netdev to 'bypass' module. avoided 2 phase registration(driver + instances). introduced IFF_BYPASS/IFF_BYPASS_SLAVE dev->priv_flags replaced mutex with a spinlock v5 RFC: Based on Jiri's comments, moved the common functionality to a 'bypass' module so that the same notifier and event handlers to handle child register/unregister/link change events can be shared between virtio_net and netvsc. Improved error handling based on Siwei's comments. v4: - Based on the review comments on the v3 version of the RFC patch and Jakub's suggestion for the naming issue with 3 netdev solution, proposed 3 netdev in-driver bonding solution for virtio-net. v3 RFC: - Introduced 3 netdev model and pointed out a couple of issues with that model and proposed 2 netdev model to avoid these issues. - Removed broadcast/multicast optimization and only use virtio as backup path when VF is unplugged. v2 RFC: - Changed VIRTIO_NET_F_MASTER to VIRTIO_NET_F_BACKUP (mst) - made a small change to the virtio-net xmit path to only use VF datapath for unicasts. Broadcasts/multicasts use virtio datapath. This avoids east-west broadcasts to go over the PCI link. - added suppport for the feature bit in qemu ==================== Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29virtio_net: Extend virtio to use VF datapath when availableSridhar Samudrala3-1/+128
This patch enables virtio_net to switch over to a VF datapath when STANDBY feature is enabled and a VF netdev is present with the same MAC address. It allows live migration of a VM with a direct attached VF without the need to setup a bond/team between a VF and virtio net device in the guest. It uses the API that is exported by the net_failover driver to create and and destroy a master failover netdev. When STANDBY feature is enabled, an additional netdev(failover netdev) is created that acts as a master device and tracks the state of the 2 lower netdevs. The original virtio_net netdev is marked as 'standby' netdev and a passthru device with the same MAC is registered as 'primary' netdev. The hypervisor needs to unplug the VF device from the guest on the source host and reset the MAC filter of the VF to initiate failover of datapath to virtio before starting the migration. After the migration is completed, the destination hypervisor sets the MAC filter on the VF and plugs it back to the guest to switch over to VF datapath. This patch is based on the discussion initiated by Jesse on this thread. https://marc.info/?l=linux-virtualization&m=151189725224231&w=2 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29virtio_net: Introduce VIRTIO_NET_F_STANDBY feature bitSridhar Samudrala2-1/+4
This feature bit can be used by hypervisor to indicate virtio_net device to act as a standby for another device with the same MAC address. VIRTIO_NET_F_STANDBY is defined as bit 62 as it is a device feature bit. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29net: Introduce net_failover driverSridhar Samudrala6-0/+923
The net_failover driver provides an automated failover mechanism via APIs to create and destroy a failover master netdev and manages a primary and standby slave netdevs that get registered via the generic failover infrastructure. The failover netdev acts a master device and controls 2 slave devices. The original paravirtual interface gets registered as 'standby' slave netdev and a passthru/vf device with the same MAC gets registered as 'primary' slave netdev. Both 'standby' and 'failover' netdevs are associated with the same 'pci' device. The user accesses the network interface via 'failover' netdev. The 'failover' netdev chooses 'primary' netdev as default for transmits when it is available with link up and running. This can be used by paravirtual drivers to enable an alternate low latency datapath. It also enables hypervisor controlled live migration of a VM with direct attached VF by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29netvsc: refactor notifier/event handling code to use the failover frameworkSridhar Samudrala3-165/+60
Use the registration/notification framework supported by the generic failover infrastructure. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 10:07:09 +0300