summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-02-19bonding: trivial: rename slave->jiffies to ->last_link_upVeaceslav Falico2-11/+12
slave->jiffies is updated every time the slave becomes active, which, for bonding, means that its link is 'up'. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: remove useless updating of slave->dev->last_rxVeaceslav Falico2-10/+1
Now that all the logic is handled via last_arp_rx, we don't need to use last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: use last_arp_rx in bond_loadbalance_arp_mon()Veaceslav Falico1-2/+2
Now that last_arp_rx correctly show the last time we've received an ARP, we can use it safely instead of slave->dev->last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: use last_arp_rx in slave_last_rx()Veaceslav Falico1-7/+3
Now that last_arp_rx really has the last time we've received any (validated or not) ARP, we can use it in slave_last_rx() instead of slave->dev->last_rx. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: use the new options to correctly set last_arp_rxVeaceslav Falico1-7/+8
Now that the options are in place - arp_validate can be set to receive all the traffic or only arp packets to verify if the slave is up, when the slave isn't validated. CC: Rob Landley <rob@landley.net> CC: "David S. Miller" <davem@davemloft.net> CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: document the new _arp options for arp_validateVeaceslav Falico1-30/+66
CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: extend arp_validate to be able to receive unvalidated arp-only trafficVeaceslav Falico2-5/+19
Currently we can either receive any traffic as a proff of slave being up, or only *validated* arp traffic (i.e. with src/dst ip checked). Add an option to be able to specify if we want to receive non-validated arp traffic only. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: always set recv_probe to bond_arp_rcv in arp monitorVeaceslav Falico2-4/+2
Currently we only set bond_arp_rcv() if we're using arp_validate, however this makes us skip updating last_arp_rx if we're not validating incoming ARPs - thus, if arp_validate is off, last_arp_rx will never be updated. Fix this by always setting up recv_probe = bond_arp_rcv, even if we're not using arp_validate. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: always update last_arp_rx on packet recieveVeaceslav Falico1-0/+2
Currently we're updating the last_arp_rx only when we've validate the packet, however afterwards we use it as 'ANY last packet received', but not only validated ARPs. Fix this by updating it in case of any packet received. It won't break the arp_validation=0 because we, anyway, return the correct slave->dev->last_rx in slave_last_rx(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: permit using arp_validate with non-ab modesVeaceslav Falico3-8/+5
Currently it's disabled because it's sometimes hard, in typical configs, to make it work - because of the nature how the loadbalance modes work - as it's hard to deliver valid arp replies to correct slaves by the switch. However we still can use arp_validation in loadbalance with several other configs, per example with arp_validate == 2 for backup with one broadcast domain, without the switch(es) doing any balancing - this way we'd be (a bit more) sure that the slave is up. So, enable it to let users decide which one works/suits them best. Also correct the mode limitation from BOND_OPT_ARP_VALIDATE. CC: Nikolay Aleksandrov <nikolay@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19bonding: remove bond->lock from bond_arp_rcvVeaceslav Falico1-3/+0
We're always called with rcu_read_lock() held (bond_arp_rcv() is only called from bond_handle_frame(), which is rx_handler and always called under rcu from __netif_receive_skb_core() ). The slave active/passive and/or bonding params can change in-flight, however we don't really care about that - we only modify the last time packet was received, which is harmless. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge branch 'r8152'David S. Miller1-185/+526
Hayes Wang says: ==================== r8152: improvement and new features Change some flows or behavior to improve the efficiency or make the code readable. Besides, support WOL and runtime suspend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support get_msglevel and set_msglevelhayeswang1-0/+16
Support get_msglevel and set_msglevel. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: set disable_hub_initiated_lpmhayeswang1-0/+1
Set disable_hub_initiated_lpm = 1. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: replace netif_rx with netif_receive_skbhayeswang1-1/+1
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently for increasing the efficiency. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: disable teredo for RTL8152hayeswang1-0/+1
Disable teredo for RTL8152 by default. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support runtime suspendhayeswang1-23/+158
Support runtime suspend for RTL8152 and RTL8153. Move tx_bottom() from tasklet to delayed_work. That avoids to transmit tx packets after calling autosuspend. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: support WOLhayeswang1-13/+105
Support WOL for RTL8152 and RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: move some functions from probe to openhayeswang1-20/+25
Add up method for rtl_ops and asign relative functions. Move clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops. Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop(). Replace allocating the memory in probe() with in ndo_open(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: combine PHY reset with set_speedhayeswang1-12/+45
PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: clear BMCR_PDOWNhayeswang1-2/+13
Modify the method of enabling the PHY to clear BMCR_PDOWN only. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: reduce the frequency of spin_lockhayeswang1-9/+38
Replace getting one item from a list with getting the whole list one time. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: load the default MAC addresshayeswang1-2/+17
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address. The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: replace some types from int to boolhayeswang1-10/+10
Modify the following functions. - r8153_u1u2en - r8153_u2p3en - r8153_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: add three functionshayeswang1-48/+51
Replace some codes with the following three functions. - rtl_drop_queued_tx - rxdy_gated_en - r8152_power_cut_en Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19r8152: move some functionshayeswang1-53/+53
Move the following functions which is for the further coding. - rtl_clear_bp - r8153_clear_bp - r8153_teredo_off - r8152b_disable_aldps - r8152b_enable_aldps - r8152b_hw_phy_cfg Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge branch 'cxgb4'David S. Miller6-30/+119
Hariprasad Shenai says: ==================== Adds support for Chelsio T5 40G adapter and Misc. fixes This patch series adds support for Chelsio T5 40G adapters and provides miscelleneous fixes for cxgb4 driver. It also adds device ids of two new T5 adapters. We would like to request this patch series to get merged via David Miller's 'net-next' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add more PCI device ids.Hariprasad Shenai1-0/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()Kumar Sanghvi1-10/+22
Also, modify is_eth_imm() to return header length so it doesn't have to be recomputed in calc_tx_flits(). Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Remove unused registers and add missing onesKumar Sanghvi1-2/+2
Remove unused registers for registers list, and add missing ones Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Query firmware for T5 ULPTX MEMWRITE DSGL capabilitiesKumar Sanghvi4-0/+19
Query firmware to see whether we're allowed to use T5 ULPTX MEMWRITE DSGL capabilities. Also pass that information to Upper Layer Drivers via the new (struct cxgb4_lld_info).ulptx_memwrite_dsgl boolean. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: LE-Workaround is not atomic in firmwareKumar Sanghvi1-1/+5
The LE workaround in firmware is not atomic and fw_ofld_connection_wrs must not interleave. Therefore, when the workaround is enabled, we need to send all ctrlq WRs on a single ctrl queue. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Allow >10G ports to have multiple queuesKumar Sanghvi1-4/+5
Based on original work by Divy Le Ray. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Print adapter VPD Part Number instead of Engineering Change fieldKumar Sanghvi3-3/+8
When we attach to adapter, print VPD Part Number instead of Engineering Change field. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add support to recognize 40G linksKumar Sanghvi4-10/+54
Also, create a new Common Code interface to translate Firmware Port Technology Type values (enum fw_port_type) to string descriptions. This will allow us to maintain the description translation table in one place rather than in every driver. Based on original work by Scott Bardone and Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge branch 'msix'David S. Miller28-400/+295
Alexander Gordeev says: ==================== net: Use pci_enable_msix_range() instead of pci_enable_msix() As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Cc: e1000-devel@lists.sourceforge.net Cc: linux-driver@qlogic.com Cc: linux-net-drivers@solarflare.com Cc: linux-pci@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: pv-drivers@vmware.com Cc: wil6210@qca.qualcomm.com ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19wil6210: Use pci_enable_msi_range() instead of pci_enable_msi_block()Alexander Gordeev1-17/+15
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: wil6210@qca.qualcomm.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vmxnet3: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-28/+19
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vmxnet3: Fix MSI-X/MSI enablement codeAlexander Gordeev1-55/+46
This update cleans up the MSI-X/MSI enablement code, fixes vmxnet3_acquire_msix_vectors() invalid return values and enables a dead code in case VMXNET3_LINUX_MIN_MSIX_VECT MSI-X vectors were allocated. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19niu: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-8/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19sfc: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: linux-net-drivers@solarflare.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Get rid of an redundant assignmentAlexander Gordeev1-1/+0
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlcnic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+6
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlcnic: Cleanup qlcnic_enable_msix() return valuesAlexander Gordeev1-5/+5
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19netxen: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+5
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Cleanup MSI-X to MSI to INTx fallback codeAlexander Gordeev1-6/+6
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19forcedeth: Fix invalid errno reporting in nv_request_irq()Alexander Gordeev1-8/+14
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19vxge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-6/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 06:56:00 +0300