summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-04CRIS: Fix alignment problem for older ldJesper Nilsson1-1/+1
CRISv10 uses a pretty old ld, which does not allow ALIGN(0), (It becomes . = 0;) so instead we align to 1 byte. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Always dump registers for segfaulting process.Jesper Nilsson1-0/+6
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add config for pausing a seg-faulting processJesper Nilsson2-3/+16
Put it on a wait queue, so we can attach gdb to the process to debug it instead of just killing it. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Don't take faults while in_atomicJesper Nilsson1-8/+5
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Fixup lookup for delay slot faultsJesper Nilsson1-1/+4
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Discard exit.text and .data at runtimeJesper Nilsson1-0/+10
This allows us to handle references from __bug_table. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add cache aligned and read mostly data sectionsJesper Nilsson1-0/+2
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Return something from profile writeJesper Nilsson1-8/+7
Even if it doesn't matter, we should return something. Also, clean up some formatting. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add ARTPEC-3 and timestamps for sync-serialJesper Nilsson1-1/+26
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better ARTPEC-3 support for gpioJesper Nilsson1-18/+78
Add PWM support, correct comment for ARTPEC-3. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add include guardJesper Nilsson1-0/+5
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better handling of pinmux settingsJesper Nilsson1-2/+26
Depending on eth, eth_mido and geth fields in wr_hwprot, don't set corresponding pins on gpio port b to gpio mode. This avoids re-resetting the ethernet PHY should this already have been done. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: New DMA defines for ARTPEC-3Jesper Nilsson1-0/+27
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: __do_strncpy_from_user: Don't read the byte beyond the nilJesper Nilsson1-4/+3
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Pagetable for ARTPEC-3Jesper Nilsson1-0/+8
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent memmap.hJesper Nilsson2-24/+25
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Check if pointer is set before using itJesper Nilsson1-8/+12
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Machine dependent dma.hJesper Nilsson2-79/+80
Move the old one to mach-fs and replace with a new one that only include the correct one for the machine architecture. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Define __read_mostly for CRISv32Jesper Nilsson1-0/+2
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Discard .note.gnu.build-id sectionJesper Nilsson1-1/+1
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Avoid compilation warning for putsJesper Nilsson1-40/+25
Rename to aputs. Also, simplify code by moving some common code out to macros. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug for assembler macrosJesper Nilsson1-0/+4
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Update for ARTPEC-3Jesper Nilsson1-5/+18
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add more delays in DDR setupJesper Nilsson3-1/+21
Also, make DDR latency configurable. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson1-0/+7
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug info for assembler codeJesper Nilsson1-0/+3
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug symbols for assembler codeJesper Nilsson1-0/+3
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Minor formatting fix in traps.cJesper Nilsson1-4/+2
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct auto-restart of syscallsJesper Nilsson1-1/+1
Register number was incorrect in syscalls that go via the restartblock (e.g, poll). Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: More ARTPEC-3 support and i2c-boardinfo.Jesper Nilsson1-8/+66
Add standard i2d-devices. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Remove obsolete pinmux.c, now machine dependent.Jesper Nilsson1-229/+0
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: kgdb: Fix compilation errorsJesper Nilsson1-8/+8
Paths were not correct and pack_hex_byte() takes two arguments. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct path for intr_vect.hJesper Nilsson1-1/+1
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Better irq mapping codeJesper Nilsson1-25/+22
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v32: Correct address for romfs in the imageJesper Nilsson1-1/+1
Is after __bss_start, not __vmlinux_end Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Additional mmu settings for ARTPEC-3Jesper Nilsson1-2/+40
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Faster syscall entry for CRISv32.Jesper Nilsson1-20/+17
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Simple insn reschedule to avoid interlocks.Jesper Nilsson1-9/+9
Brings down the CPI from ~1.5 to ~1.1. Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Add debug for assembler functionsJesper Nilsson2-1/+29
Signed-off-by: Edgar Iglesias <Edgar.Iglesias@axis.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Correct address of the romfs in boot imageJesper Nilsson1-1/+1
The romfs should land after __init_end Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Fasttimer: Remove obsolete ifdefJesper Nilsson1-5/+1
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Better link to rs485 in helpJesper Nilsson1-1/+1
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: Remove CVS tag.Jesper Nilsson1-2/+1
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: v10: remove all BKL usageJesper Nilsson1-26/+13
We don't need to take the BKL here. Also fixes compile error after last commit (smp_lock.h was not included) Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04CRIS: gpio: don't call copy_to_user()/copy_from_user() while holding spinlocksJesper Nilsson1-32/+48
copy_to_user()/copy_from_user() must not be used with spinlocks held. Move locks inside each case so we have better control of when the locks are held. Also, since we use spinlocks, we don't need to hold the BKL, so remove it. Reported-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04arch/cris: Remove unnecessary casts of private_dataJoe Perches1-5/+5
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04cris: autoconvert trivial BKL users to private mutexJesper Nilsson4-12/+6
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
2010-08-04cris: Pushdown the bkl from ioctlJesper Nilsson7-61/+137
From: Frederic Weisbecker <fweisbec@gmail.com> Pushdown the bkl to the remaining drivers using the deprecated .ioctl. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com>
2010-08-04CRIS: invoke oom-killer from page faultJesper Nilsson1-4/+4
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Mikael Starvik <starvik@axis.com>
2010-08-04CRIS: GENERIC_TIME fixesJesper Nilsson4-106/+45
GENERIC_TIME was not functional for CRIS, giving random backward time jumps. For CRISv32 implement a new clocksource using the free running counter and ditch the arch_gettimeoffset. The random time jumps still existed, but turned out to be the write_seqlock which was missing around our do_timer() call. So switch over to GENERIC_TIME using the clocksource for CRISv32. CRISv10 doesn't have the free running counter needed for the clocksource trick, but we can still use GENERIC_TIME with arch_gettimeoffset. Unfortunately, there were problems in using the prescaler register to timer0 for the gettimeoffset calculation, so it is now ignored, making our resolution worse by the tune of 40usec (0.4%) worst case. At the same time, clean up some formatting and use NSEC_PER_SEC instead of 1000000000. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-12 08:58:06 +0300