| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The custom log wrappers ERR, WARNING, DBG and VDBG don't add anything
useful that cannot easily be done with dev_err() and friends. Replace
the custom stuff by the well known functions from printk.h.
Also drop some dead code in a #if 0 block.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240304165404.807787-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a USB hub is described in DT, such as any device that matches the
onboard-hub driver, the connect_type is set to "unknown" or
USB_PORT_CONNECT_TYPE_UNKNOWN. This makes any device plugged into that
USB port report their 'removable' device attribute as "unknown".
ChromeOS userspace would like to know if the USB device is actually
removable or not so that security policies can be applied. Improve the
connect_type attribute for ports, and in turn the removable attribute
for USB devices, by looking for child devices with a reg property or an
OF graph when the device is described in DT.
If the graph exists, endpoints that are connected to a remote node must
be something like a usb-{a,b,c}-connector compatible node, or an
intermediate node like a redriver, and not a hardwired USB device on the
board. Set the connect_type to USB_PORT_CONNECT_TYPE_HOT_PLUG in this
case because the device is going to be plugged in. Set the connect_type
to USB_PORT_CONNECT_TYPE_HARD_WIRED if there's a child node for the port
like 'device@2' for port2. Set the connect_type to USB_PORT_NOT_USED if
there isn't an endpoint or child node corresponding to the port number.
To make sure things don't change, only set the port to not used if
there are child nodes. This way an onboard hub connect_type doesn't
change until ports are added or child nodes are added to describe
hardwired devices. It's assumed that all ports or no ports will be
described for a device.
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Cc: maciek swiech <drmasquatch@google.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240223005823.3074029-3-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a graph with 4 output endpoints to this hub binding to support the
scenario where a downstream facing port is connected to a device that
isn't a connector or a USB device with a VID:PID. This will be used to
connect downstream facing ports to USB type-c switches so the USB
superspeed and high speed lanes can be put onto USB connectors.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: Pin-yen Lin <treapking@chromium.org>
Cc: maciek swiech <drmasquatch@google.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240223005823.3074029-2-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TI TUSB8020B is a 2-port USB 3.0 hub. Add support for
this hub in the driver in order to bring up reset, and supply
dependencies.
Power-up: Issue a GPIO reset (GRSTz) 3ms after VDD and VDD33 stabilize.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240227090228.22156-2-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The TI USB8020B is a USB 3.0 hub controller with 2 ports.
This initial version of the binding only describes USB related aspects
of the USB8020B, it does not cover the option of connecting the controller
as an i2c slave.
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20240227090228.22156-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable count is being initialized and incremented but it is never
actually referenced in any other way. The variable is redundant and can
be removed.
Cleans up clang scan build warning:
drivers/usb/musb/musb_gadget.c:1747:12: warning: variable 'count' set
but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240229115548.218713-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The binding references usb-connector.yaml schema, which lists all
allowed properties and ends with unevaluatedProperties:false, so we can
simplify analogix,anx7411 binding by dropping everything covered by
usb-connector.yaml.
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20240222082819.10321-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add revision value for identifying DWC31 version 2.00a based controllers.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240301213554.7850-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All AM62 devices have Errata i2409 [1] due to which
USB2 PHY may lock up due to short suspend.
Workaround involves setting bit 5 and 4 PLL_REG12
in PHY2 register space after USB controller is brought
out of LPSC reset but before controller initialization.
Handle this workaround.
[1] - https://www.ti.com/lit/er/sprz487d/sprz487d.pdf
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-4-0ada8ddb0767@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
TRM information is outdated and design team has confirmed
that PHY_CORE_VOLTAGE should be 0 irrespective of
VDD_CORE voltage.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-3-0ada8ddb0767@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Disable wakeup at remove.
Fixes the below warnings on module unload and reload.
> dwc3-am62 f900000.dwc3-usb: couldn't enable device as a wakeup source: -17
> dwc3-am62 f910000.dwc3-usb: couldn't enable device as a wakeup source: -17
Fixes: 4e3972b589da ("usb: dwc3-am62: Enable as a wakeup source by default")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-2-0ada8ddb0767@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As runtime PM is enabled, the module can be runtime
suspended when .remove() is called.
Do a pm_runtime_get_sync() to make sure module is active
before doing any register operations.
Doing a pm_runtime_put_sync() should disable the refclk
so no need to disable it again.
Fixes the below warning at module removel.
[ 39.705310] ------------[ cut here ]------------
[ 39.710004] clk:162:3 already disabled
[ 39.713941] WARNING: CPU: 0 PID: 921 at drivers/clk/clk.c:1090 clk_core_disable+0xb0/0xb8
We called of_platform_populate() in .probe() so call the
cleanup function of_platform_depopulate() in .remove().
Get rid of the now unnnecessary dwc3_ti_remove_core().
Without this, module re-load doesn't work properly.
Fixes: e8784c0aec03 ("drivers: usb: dwc3: Add AM62 USB wrapper driver")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240227-for-v6-9-am62-usb-errata-3-0-v4-1-0ada8ddb0767@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Hi3798MV200 uses dwc3 controller with a few more clocks and a dedicated
resets. Use of_simple driver for it.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240225-dwc3-v4-2-8c1fd6c6f615@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the DWC3 controller used by Hi3798MV200.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240225-dwc3-v4-1-8c1fd6c6f615@outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register SOP' alternate modes with a Type-C Connector Class cable plug.
Alternate modes are queried from the PPM using the GET_ALTERNATE_MODES
command with recipient set to SOP'.
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jameson Thies <jthies@google.com>
Link: https://lore.kernel.org/r/20240305025804.1290919-5-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register SOP and SOP' Discover Identity responses with the USB Type-C
Connector Class as partner and cable identities, respectively. Discover
Identity responses are requested from the PPM using the GET_PD_MESSAGE
UCSI command.
Signed-off-by: Jameson Thies <jthies@google.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20240305025804.1290919-4-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Register cables with the Type-C Connector Class in the UCSI driver based
on the PPM response to GET_CABLE_PROPERTY. Registered cable properties
include plug type, cable type and major revision.
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jameson Thies <jthies@google.com>
Link: https://lore.kernel.org/r/20240305025804.1290919-3-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Clean up UCSI_CABLE_PROP macros by fixing a bitmask shifting error for
plug type and updating the modal support macro for consistent naming.
Fixes: 3cf657f07918 ("usb: typec: ucsi: Remove all bit-fields")
Cc: stable@vger.kernel.org
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jameson Thies <jthies@google.com>
Link: https://lore.kernel.org/r/20240305025804.1290919-2-jthies@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we have a neat macro, at least new code should
use it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240229131851.16148-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the port is setting the pin configuration when no configuration is
chosen, the DisplayPort driver will not send Configure to the cable plug
if it's available. Add transition to DP_STATE_CONFIGURE_PRIME.
Fixes: 71ba4fe56656 ("usb: typec: altmodes/displayport: add SOP' support")
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240223002302.3937235-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The Smatch checker flags svdm_version being uninitialized for Discover
Identity Messages within tcpm_pd_svdm for the CMDT_INIT case. Cable plugs
cannot initialize SVDM commands, however a port partner that isn't allowed
to communicate over SOP' could, which would result in the CMDT_INIT block
running for a received SOP' message.
First, initialize svdm_version for the TCPC_TX_SOP_PRIME case. If the
svdm_version returns as an error, we expect the received svdm to be the
result of Discover Identity that updates the value accordingly.
Next, drop all SOP' messages of type CMDT_INIT within tcpm_pd_svdm.
Finally, remove redundant call that assigns modep and pdev. Smatch will
raise an uninitialized symbol error over modep_prime and pdev_prime, but
both the assignment and use of these variables are guarded behind
a check for rx_sop_type == TCPC_TX_SOP_PRIME.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a432603b-b801-4001-b309-247dded707d3@moroto.mountain/
Fixes: fb7ff25ae433 ("usb: typec: tcpm: add discover identity support for SOP'")
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240223002233.3936275-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Ports with _UPC (USB Port Capability) ACPI objects stating they are
"not connectable" are not wired to any connector or internal device.
They only exist inside the host controller.
These ports may not have an ACPI _PLD (Physical Location of Device)
object.
Rework the code so that _UPC is read even if _PLD does not exist, and
make sure the port->connect_type is set to "USB_PORT_NOT_USED" instead
of "USB_PORT_CONNECT_TYPE_UNKNOWN".
No bugs or known issues are reported due to possibly not parsing _UPC,
and thus leaving the port connect type as "unknown" instead of
"not used". Nice to have this fixed but no need to add it to stable
kernels, or urgency to get it upstream.
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240223140305.185182-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Minimal ACPI support was added to the Qualcomm DWC3 glue driver in order to
enable USB on SDM850 and SC8180X compute platforms. The support is still
functional, but unnoticed regressions in other drivers indicates that no
one actually booting any of platforms dependent on this implementation.
The functionality provides is the bare minimum and is not expected to aid
in the effort of bringing full ACPI support to the driver in the future.
Remove the ACPI code from the Qualcomm DWC3 glue driver to aid in the
implementation of improvements that are actually used like multiport and
flattening device tree.
Commit message by Bjorn Andersson.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240305093216.3814787-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Motivation
----------
The binary device object store (BOS) of a USB device consists of the BOS
descriptor followed by a set of device capability descriptors. One that is
of interest to users is the platform descriptor. This contains a 128-bit
UUID and arbitrary data, and it allows parties outside of USB-IF to add
additional metadata about a USB device in a standards-compliant manner.
Notable examples include the WebUSB and Microsoft OS 2.0 descriptors.
The kernel already retrieves and caches the BOS from USB devices if its
bcdUSB is >= 0x0201. Because the BOS is flexible and extensible, we export
the entire BOS to sysfs so users can retrieve whatever device capabilities
they desire, without requiring USB I/O or elevated permissions.
Implementation
--------------
Add bos_descriptors attribute to sysfs. This is a binary file and it works
the same way as the existing descriptors attribute. The file exists only if
the BOS is present in the USB device.
Also create a binary attribute group, so the driver core can handle the
creation of both the descriptors and bos_descriptors attributes in sysfs.
Signed-off-by: Elbert Mai <code@elbertmai.com>
Link: https://lore.kernel.org/r/20240305002301.95323-1-code@elbertmai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PM4125 PMIC has the same Type-C register block as the PMI632.
Likewise it doesn't support USB Power Delivery. Define the compatible
for the TypeC block found on PM4125, using PMI632 as a compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240304-pm4125-typec-v4-1-f3601a16f9ea@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240222174456.25903-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The correct interrupt name is 'hs_phy_irq' not 'hs_phY_irq'.
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240220-dt-bindins-qcom-dwc3-fix-typo-v1-1-742bf6e49641@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Define VBUS regulator and the Type-C handling block as present on the
Qualcomm PM6150 PMIC.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240220202147.228911-3-danila@jiaxyga.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The PM6150 PMIC has the same Type-C register block as the PM8150B.
Define corresponding compatible string, having the qcom,pm8150b-vbus-reg
as a fallback.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240220202147.228911-2-danila@jiaxyga.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240220080617.2674613-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A call to usb_set_interface() crashes if the device is deallocated
concurrently, such as due to physical removal or a serious IO error.
It could also interfere with other drivers using the device if the
current driver is unbound before the call is finished.
Document the need to delay driver unbinding until this call returns,
which solves both issues.
Document the same regarding usb_clear_halt(), which is equally known
to be routinely called by drivers.
Explicitly mention finishing pending operations in the documentation
of the driver disconnect callback.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Link: https://lore.kernel.org/r/20240218092515.7635ff8c@foxbook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently xhci_map_urb_for_dma() creates a temporary buffer and copies
the SG list to the new linear buffer. But if the kzalloc_node() fails,
then the following sg_pcopy_to_buffer() can lead to crash since it
tries to memcpy to NULL pointer.
So return -ENOMEM if kzalloc returns null pointer.
Cc: stable@vger.kernel.org # 5.11
Fixes: 2017a1e58472 ("usb: xhci: Use temporary buffer to consolidate SG")
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DbC driver starts polling for events immediately when DbC is enabled.
The current polling interval is 1ms, which keeps the CPU busy, impacting
power management even when there are no active data transfers.
Solve this by polling at a slower rate, with a 64ms interval as default
until a transfer request is queued, or if there are still are pending
unhandled transfers at event completion.
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Two NEC uPD720200 adapters have been observed to randomly misbehave:
a Stop Endpoint command fails with Context Error, the Output Context
indicates Stopped state, and the endpoint keeps running. Very often,
Set TR Dequeue Pointer is seen to fail next with Context Error too,
in addition to problems from unexpectedly completed cancelled work.
The pathology is common on fast running isoc endpoints like uvcvideo,
but has also been reproduced on a full-speed bulk endpoint of pl2303.
It seems all EPs are affected, with risk proportional to their load.
Reproduction involves receiving any kind of stream and closing it to
make the device driver cancel URBs already queued in advance.
Deal with it by retrying the command like in the Running state.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A trb_in_td() call is used to determine if a completion event matches
any TRB of the currently executing TD. This function is told to start
searching right after the last finished TD, which is not at all where
the currently expected TD is guaranteed to begin, because some TDs in
between may have been cancelled.
Not only is a pointless work performed, but a bug resulting in the HC
executing cancelled TDs was seen to trick the driver into associating
events from a TD just cancelled with an unrelated future TD.
Since the ring is being traversed for the specific purpose of finding
a match with the current TD, always start from its first TRB. This is
the most reliable bit of information that we posses.
Tracking of HC's work progress is not affected, except for cases when
a misattributed event would have moved dequeue past a pending TD.
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Refactor the code to improve readability by using
'xhci_free_segments_for_ring()' function for freeing ring segments.
This replaces the custom while loop previously used within
'xhci_ring_expansion()' and 'xhci_alloc_segments_for_ring()'.
Slightly modify 'xhci_free_segments_for_ring()' to handle lists
which do not loop. This makes it possible to use it in error
paths of 'xhci_alloc_segments_for_ring()'.
This change also prepares for switching the custom xhci linked segment
list into to more standard list.h lists.
[minor commit message rewording -Mathias]
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace a segment of code within 'xhci_clear_command_ring()' with a
function call to 'xhci_initialize_ring_info()'. This change eliminates
code duplication, as 'xhci_initialize_ring_info()' performs the same
operations as the replaced code.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Slot ID is a index of a virtual device in struct 'xhci_hcd->devs[]'.
Previously, to get the slot ID associated with a port, we had to loop
through all devices and compare ports, which is very inefficient.
Instead, the slot ID (of the device which is directly connected to the
port), is added to the its corresponding 'xhci_port' struct. As a result,
finding the port's device is quick and easy.
Function 'xhci_find_slot_id_by_port()' is removed, as it is no longer
needed.
Signed-off-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Variables real & fake port do not convey their purpose, thus they are
replaced with a pointer to the root hub port 'struct xhci_port *rhub_port'.
'rhub_port' contains real & fake ports in zero-based format, which happens
to be more widely used inside the xHCI driver:
- 'real_port' is ('rhub_port->hw_portnum' + 1)
- 'fake_port' is ('rhub_port->hcd_portnum' + 1)
One reason for real port being one-based, is to signal other functions in
case struct 'xhci_virt_device' initialization failed, in this case the
value will remain 0. This is no longer needed, instead we check whether
or not 'rhub_port' is 'NULL'.
Signed-off-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xHC hardware needs to know which roothub port a USB device is attached to
when controlling the device, so the xHCI driver stores in each device the
roothub port which it's connected behind. This is done with two different
port index values, the 'real_port' which is an index to the xHC hardware
port register array, and the 'fake_port' which is the per hub port index
used by the hub driver.
Instead of finding real & fake port separately, find the root hub port
'xhci_port' structure which contains both real & fake port values:
- 'real_port' is ('hw_portnum' + 1)
- 'fake_port' is ('hcd_portnum' + 1)
i.e. real & fake port are 'hw_portnum' & 'hcd_portnum' in one-based
format.
The 'xhci_port' structure is a better way to refer to roothub ports than
the 'real_port' & 'fake_port'. As a result, these port indexes are slated
to be replaced with a direct pointer to the root hub port. This patch
setups the ground work for the future changes.
Signed-off-by: Niklas Neronin <niklas.neronin@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the structures typec_mux_class, retimer_class and
typec_class to be declared at build time placing them into read-only
memory, instead of having to be dynamically allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240301-class_cleanup-usb-v1-1-50309e325095@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We have a macro. It should be used.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240229132401.3270-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v6.9 merge window
This includes following USB4/Thunderbolt changes for the v6.9 merge
window:
- Reset the topology also for USB4 v1 routers on driver load
- DisplayPort tunneling and bandwidth allocation mode improvements
- Tracepoint support for the control channel
- Couple of minor fixes and cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (23 commits)
thunderbolt: Constify the struct device_type usage
thunderbolt: Add trace events support for the control channel
thunderbolt: Keep the domain powered when USB4 port is in redrive mode
thunderbolt: Improve DisplayPort tunnel setup process to be more robust
thunderbolt: Calculate DisplayPort tunnel bandwidth after DPRX capabilities read
thunderbolt: Reserve released DisplayPort bandwidth for a group for 10 seconds
thunderbolt: Introduce tb_tunnel_direction_downstream()
thunderbolt: Re-order bandwidth group functions
thunderbolt: Fail the failed bandwidth request properly
thunderbolt: Log an error if DPTX request is not cleared
thunderbolt: Handle bandwidth allocation mode disable request
thunderbolt: Re-calculate estimated bandwidth when allocation mode is enabled
thunderbolt: Use DP_LOCAL_CAP for maximum bandwidth calculation
thunderbolt: Correct typo in host_reset parameter
thunderbolt: Skip discovery also in USB4 v2 host
thunderbolt: Reset only non-USB4 host routers in resume
thunderbolt: Remove usage of the deprecated ida_simple_xx() API
thunderbolt: Fix rollback in tb_port_lane_bonding_enable() for lane 1
thunderbolt: Fix XDomain rx_lanes_show and tx_lanes_show
thunderbolt: Reset topology created by the boot firmware
...
|
|
Since commit aed65af1cc2f ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
tb_domain_type, tb_retimer_type, tb_switch_type, usb4_port_device_type,
tb_service_type and tb_xdomain_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Sometimes it is useful to see the traffic happening inside the control
channel, especially when debugging a possible problem. This adds
tracepoints close to the hardware which can be enabled dynamically as
needed using the standard Linux trace events facility.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Co-developed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If a DiplayPort cable is directly connected to the host routers USB4
port, there is no tunnel involved but the port is in "redrive" mode
meaning that it is re-driving the DisplayPort signals from its
DisplayPort source. In this case we need to keep the domain powered on
otherwise once the domain enters D3cold the connected monitor blanks
too.
Since this happens only on Intel Barlow Ridge add a quirk that takes
runtime PM reference if we detect that the USB4 port entered redrive
mode (and release it once it exits the mode).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
We need it here for the USB fixes, and it resolves a merge conflict as
reported in linux-next in drivers/usb/roles/class.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
|
|
Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
