summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-11-06net: drop capability from protocol definitionsEric Paris16-29/+2
struct can_proto had a capability field which wasn't ever used. It is dropped entirely. struct inet_protosw had a capability field which can be more clearly expressed in the code by just checking if sock->type = SOCK_RAW. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: version 1.52.1-3Yaniv Rosner1-2/+2
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Fix register access timeout in 10MYaniv Rosner1-1/+2
In BCM8481 when link speed goes from 1G to 10M, driver received timeout since the MAC clock hasn't synced yet with the new speed, so it is required first to program the MAC with the new speed, and only then configure other parameters Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Fix 10G mode in BCM8481/BCM84823Yaniv Rosner2-30/+9
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Fix BCM8726 ROM load seqYaniv Rosner1-11/+2
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Add support for BCM84823Yaniv Rosner2-3/+42
Add support for new phy type BCM84823 (Dual copper-port phy) Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Modify BCM8706 link init seqYaniv Rosner1-13/+18
Modify BCM8706 link initialization sequence so that first it link up between Serdes and BCM8706, and only then between BCM8706 to network Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Enable FC when parallel-detect is usedYaniv Rosner2-0/+41
When parallel detect is used, flow-control is set to the req_fc_auto_adv instead of none. Motive: when 577xx is FC configuration is set to AUTO, while LP speed is set to FORCE mode and FC to force RX/TX, link would come up using parallel detect, and the FC will be set to NONE since FC capabilities were not negotiated, although the LP is setting FC to force RX/TX. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Miscellaneous debug print and tabsYaniv Rosner1-1/+3
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Fix CL73 autoneg issuesYaniv Rosner4-65/+104
- Advertise 1G KX4 in CL73 when 1G speed capability is enabled - Add flow-control negotiation over CL73 - External loopback test on Serdes should be done in FORCE mode, since in CL73 it is unable to link up with the same core using AUTONEG - Fix bnx2x_set_led function to support CL73 link leds Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-06bnx2x: Fix Parallel-Detect settingsYaniv Rosner1-6/+9
Enable Parallel-Detect for 10G and 1G only if the relevant speed capability is enabled Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05tcp: Use defaults when no route options are availableGilad Ben-Yossef2-3/+1
Trying to parse the option of a SYN packet that we have no route entry for should just use global wide defaults for route entry options. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Tested-by: Valdis.Kletnieks@vt.edu Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05tcp: Do not call IPv4 specific func in tcp_check_reqGilad Ben-Yossef1-6/+3
Calling IPv4 specific inet_csk_route_req in tcp_check_req is a bad idea and crashes machine on IPv6 connections, as reported by Valdis Kletnieks Also, all we are really interested in is the timestamp option in the header, so calling tcp_parse_options() with the "estab" set to false flag is an overkill as it tries to parse half a dozen other TCP options. We know whether timestamp should be enabled or not using data from request_sock. Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com> Tested-by: Valdis.Kletnieks@vt.edu Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05TI DaVinci EMAC: Add suspend/resume capabilityRanjith Lohithakshan1-3/+27
Add suspend/resume capability to TI DaVinci EMAC driver. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-05net: net/ipv4/devinet.c cleanupsEric Dumazet1-28/+33
As pointed by Stephen Rothwell, commit c6d14c84 added a warning : net/ipv4/devinet.c: In function 'inet_select_addr': net/ipv4/devinet.c:902: warning: label 'out' defined but not used delete unused 'out' label and do some cleanups as well Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04decnet: avoid touching device refcount in dn_dev_by_index()Eric Dumazet1-4/+6
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04net: cleanup include/linuxEric Dumazet87-694/+351
This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04NET: sungem, use spin_trylock_irqsaveJiri Slaby1-3/+1
Use spin_trylock_irqsave instead of open-coded local_irq_save+spin_trylock. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04net: Introduce for_each_netdev_rcu() iteratorEric Dumazet11-77/+68
Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04em_meta: avoid one dev_put()Eric Dumazet1-6/+6
Another rcu conversion to avoid one dev_hold()/dev_put() pair Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04bnx2: avoid compiler warningsEric Dumazet1-0/+4
drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’: drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’: drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function One fix would be to have an initial value, but a plain return might be better. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04net: cleanup include/netEric Dumazet37-240/+120
This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04Phonet: remove tautologiesRémi Denis-Courmont1-4/+2
These checks don't make sense anymore since rtnl_notify() cannot fail. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04trivial: remove duplicated MIN macro from tehuti.Thiago Farina2-3/+1
Since the kernel api already has the macro "min", just use it instead of declaring another one. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04cnic: ensure ulp_type is not negativeroel kluin1-4/+4
`ulp_type' is signed, make sure it is not negative when we read the array element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04qlge: Clean up netdev->stats usage.Ron Mercer2-5/+49
Don't access netdev->stats in IO path. Save them in tx_ring/rx_rings and add them up when get_stats API is called. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04qlge: Add firmware/driver sub-command support.Ron Mercer2-7/+61
These sub-commands are issued by another (FCoE) function requesting an operation on a shared resource. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-04qlge: Fix indentations.Ron Mercer1-4/+4
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tc35815: Kill unused codeAtsushi Nemoto1-221/+3
- TC35815_DMA_SYNC_ONDEMAND is always enabled. - WORKAROUND_LOSTCAR is always enabled. - WORKAROUND_100HALF_PROMISC is always enabled. - GATHER_TXINT is always enabled. - TC35815_USE_PACKEDBUFFER is always disabled. - NO_CHECK_CARRIER is always disabled. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tc35815: Kill non-napi codeAtsushi Nemoto1-67/+1
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Basic Support for programming hash rulesSandeep Gopalpet4-0/+404
This patch provides basic hash rules programming via the ethtool interface. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Add Multiple group SupportSandeep Gopalpet4-209/+422
This patch introduces multiple group support for etsec2.0 devices. Multiple group support is provided by mapping the set of enabled queues to different groups and then programming the per group regsiters imask, ievent, rstat, tstat. The queues corresponding to a group are indicated by programming isrg (interrupt steering) registers. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Add support etsec2.0 registers.Sandeep Gopalpet1-11/+44
This patch adds support for etsec2.0 regsiters Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03fsl_pq_mdio: Add Suport for etsec2.0 devices.Sandeep Gopalpet2-13/+57
This patch adds mdio support for etsec2.0 devices. Modified the fsl_pq_mdio structure to include the new mdio members. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Add Multiple Queue SupportSandeep Gopalpet4-290/+621
This patch introduces multiple Tx and Rx queues. The incoming packets can be classified into different queues based on filer rules (out of scope of this patch). The number of queues enabled will be based on a DTS entries fsl,num_tx_queues and fsl,num_rx_queues. Although we are enabling multiple queues, the interrupt coalescing is on per device level (etsec-1.7 doesn't support multiple rxics and txics). Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Introduce logical group support.Sandeep Gopalpet4-200/+250
This patch introduces the group structure. The elements of this structure are the interrupt lines, their corresponding names, the register memory map. The elements for this group are factored out from the gfar_private structure. The introduction of group structure will help in providing support for newer versions of etsec. Currently, the support is present only for single group and single tx/rx queues. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03gianfar: Add per queue structure supportSandeep Gopalpet4-245/+398
This patch introduces per tx and per rx queue structures. Earlier the members of these structures were inside the gfar_private structure. Moving forward if we want to support multiple queues, we need to refactor the gfar_private structure so that introduction of multiple queues is easier. Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3: Update version to 3.103Matt Carlson1-2/+2
This patch updates the tg3 version to 3.103. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3 / broadcom: Optionally disable TXC if no linkMatt Carlson3-0/+7
This patch adds code to disable the TXC and RXC reference clocks if link is not available. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3 / broadcom: Add APD support for GPHYsMatt Carlson2-10/+45
This patch adds an RXC auto power-down feature to the code that supports the gphys. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3 / broadcom: Add code to disable rxc refclkMatt Carlson3-2/+46
The 5785 does not use the RXC reference clock. Turning it off is desirable as it saves power. By default, the 50610 enables the RXC reference clock and the 50610M disables it. Presumably this is one of the reasons why the hardware architect chose one over the other. Adding a "rx reference clock disable" flag is not the ideal way to describe the option, as it would force the MAC using a 50610M to set the flag. Ideally we want the flags to represent opt-in behavior that deviates from hardware defaults. Furthermore, the lack of a "disable" flag implies that the requester wants the rx reference clock enabled, which doesn't necessarily follow. By presenting the option as a passive statement (rx reference clock unused) rather than a command, I hope to convey an opt-in option to disable the rx reference clock that falls back to hardware defaults if not set. A secondary benefit of this is that it keeps the intelligence about phy defaults in the broadcom module where it belongs and allows the broadcom module more latitude should a bug arise. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3 / broadcom: Refine AC131 APD supportMatt Carlson2-3/+6
Auto power-down (APD) support is a power-saving feature. It should be selectively enabled since it might expose MAC bugs. This patch changes the code to enable APD only if the PHY_BRCM_AUTO_PWRDWN_ENABLE flag is set. The tg3 driver was changed to set this bit. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3 / broadcom: Add PHY_BRCM_CLEAR_RGMII_MODE flagMatt Carlson3-0/+8
Broadcom 50610M parts changed the default definitions of the RGMII mode shadow register. The 5785 needs the RGMII mode selection bits [4:3] cleared. The default value of the remaining bits in this register are zero. Rather than unnecessarily burn an extra bit in the dev_flags member in an attempt to enumerate all possible combinations, this patch take a more course grained approach and labels the option as "clear all bits". Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03broadcom: Consolidate dev_flags definitionsMatt Carlson2-16/+12
This patch moves all the dev_flags enumerations outside the broadcom.c file to include/linux/brcmphy.h. The existing flags were not used yet and have been re-enumerated to avoid conflicts. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3: Add 50610M phy ID for 5785Matt Carlson2-0/+3
This patch adds the 50610M phy ID for 5785. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03broadcom: Fix slow link problemMatt Carlson1-8/+14
When a 50610 or 50610M is paired against particular remote partners, link is slow to come up. This patch works around the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03broadcom: Isolate phy dsp accessesMatt Carlson1-48/+42
This patch consolidates the code that requires the SMDSP clock to be enabled into a single function that (hopefully) makes the dependency obvious. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3: Extend loopback test timeoutMatt Carlson1-2/+2
This patch extends the loopback test timeout from 250 usec to 350 usec. When the 5785 is paired against an AC131 phy, the older timeout is just a little too close to the expected performance based on timings. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3: 5785: Set port mode to MII when link downMatt Carlson1-1/+4
This patch sets the port mode to MII when the link is down for the 5785. Setting the port mode to MII instead of GMII saves power. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-03tg3: Add AC131 power down supportMatt Carlson2-0/+23
The AC131 does not respect the power down bit (bit 11) of the MII Control Register (reg 0x0). Instead, software is required to put the phy into standby power down mode through the shadow register set. This patch implements support for the AC131 standby power down mode. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-21 20:09:05 +0300