summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-12-18ASoC: Intel: Skylake: Add Nuvoton Maxim machine driverRohit Ainapure3-0/+501
This adds Skylake I2S machine driver which uses NAU88L25 as anlog codec and MAX98357A as speakers Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-18ASoC: Intel: Add Nuvoton+Maxim machine driver entryRohit Ainapure1-0/+2
Add the NAU88L25 + MAX98357A machine driver entry into the machine table Signed-off-by: Rohit Ainapure <rohit.m.ainapure@intel.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-16ASoC: Intel: Skylake: pointer math issueDan Carpenter1-2/+2
"data" is a u32 pointer so this copies the information to wrong place entirely. Fixes: 140adfba5280 ('ASoC: Intel: Skylake: Add tlv byte kcontrols') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-16ASoC: Intel: Skylake: Fix a couple signedness bugsDan Carpenter1-3/+3
These need to be signed because they hold negative error codes. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-16ASoC: Intel: sst: fix sst_memcpy32 wrong with non-4x bytes issueJie Yang1-1/+15
sst_memcpy32() only copied bytes/4 32bits, which means it dropped the remaining bytes%4 bytes wrongly. Here add copying those missing bytes, first to a 32bits tmp, and then write the tmp to 32bits iomem. Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-14ASoC: Intel: sst: fix the IRQ locked issueLiam Girdwood1-18/+13
If driver received a message that it can't handle, it won't clear the corresponding bit and unmask interrupt, this may lock the IRQ and DSP can't send message anymore. To fix the issue, we should Always update IMRX after IPC. Here we always clear the DONE/BUSY bit and unmask the IRQ source, even when IPC failures have occurred previously. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Modified-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Jie Yang <yang.jie@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-09Merge branch 'topic/sink' of ↵Mark Brown2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2015-12-08ASoC: Intel: Skylake: Update ignore suspend for rt286 machinePraveen Diwakar1-2/+15
We should only add ignore suspend flag for some DAIs and not all. This patches removes it from the DAIs where we do not support this It also marks the endpoints for which ignore_suspend should be enabled Signed-off-by: Praveen Diwakar <praveen.diwakar@intel.com> Signed-off-by: Vunny Sodhi <vunnyx.sodhi@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add support for active suspendJeeja KP3-2/+55
Some of the usecases can be marked as 'ignore_suspend' by machine. For these on suspend we should keep audio controller ON by saving the state and not suspending the device For this we need to maintain a counter for these streams and be active on suspend when such a stream is opened. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Fix the dapm machine mapVinod Koul1-2/+2
DAPM Machine map for machine was not specifying the paths correctly. The correct order should be: "DMIC01 Rx" (SoC DMIC BE), connected to "DMIC AIF" (DMic Codec AIF) and then "DMic" (DMic codec Input) connected to "SoC DMIC" (Machine DMIC MIC Widget) Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: add wov as int sinkVinod Koul1-0/+3
Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add dai link for DMIC captureJeeja KP1-0/+51
Since in Skylake we support another DAI for DMIC quad capture, add a dailink for this as well. Also specify constrains for DMIC FE devices and fixup for DMIC BEs Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: read params from DSP if module is onOmair M Abdullah3-0/+22
If a module is ON then we should read the module parameters from DSP rather than driver cached values Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: add LARGE_CONFIG_GET IPC supportMousami Jana2-0/+56
For messages which have larger payload than mailbox data, we need to split the payload using set of messages containing mailbox size as payload. For sending such payload we already support LARGE_CONFIG_SET IPCs and now to query such payload add LARGE_CONFIG_GET IPC Signed-off-by: Mousami Jana <mousami.janax@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: update mailbox uplink window offset and sizeOmair M Abdullah1-2/+2
SKL actual mailbox size is 0x10000 and initial values were 0x800, so update these accordingly Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Fix module init data correctlyJeeja KP3-10/+16
Module initialization parameter data can be set by - INIT_INSTANCE IPC by using the default value - SET_PARAMS immediately after INIT_INSTANCE - SET_PARAMS data from kcontrol values set this patch add param type to identify the parameters has to be sent to DSP. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add support for Mic Select moduleDharageswari R3-1/+33
Mic select is a DSP module which is used to select one or many inputs to form an output. This is useful to select data selectively from PDM input and hence the name. This module is of generic module type. This patch adds support to add and configure Mic select module in firmware topology. Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add memory pages to widget data.Jeeja KP3-0/+3
A module can require extra memory for processing, like audio algorithms. The memory for these modules needs to be represented in base module configuration and passed to DSP on init, so add the memory pages as a field in widget data Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-08ASoC: Intel: Skylake: Add support for Loadable modulesDharageswari R5-1/+276
A module is loaded when the path consisting the module is opened. The module binary(ies) is loaded from file system and cached in kernel memory for future use. This is downloaded to DSP using DMA and invoking Load module IPCs This patch adds support for load/unload module IPCs, DMAing modules and manging the modules Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add tlv byte kcontrolsJeeja KP2-5/+123
This adds tlv bytes topology control creation and control load to initialize kcontrol data. And this also adds the callbacks for the these tlv byte kcontrols Signed-off-by: Mythri P K <mythri.p.k@intel.com> Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add support to configure module paramsJeeja KP2-1/+95
This adds support to configure module parameter during module initialization or after module init using set module param required by the DSP firmware sequence. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routine to handle Algo parameterJeeja KP3-1/+38
Some DSP modules has user configurable parameters, which are required by some modules at module initialization. To configure the module algorithm parameter during initialization we add helpers here Signed-off-by: Divya Prakash <divya1.prakash@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Add helper routines to handle module paramsJeeja KP3-4/+20
Some DSP modules have user configurable parameters. These parameters are required by modules in the following scenario - during initialization - after initialization using set parameter This patch adds helper routine to set module parameters using large config set IPC message and removes params to be passed as init module routine. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-02ASoC: Intel: Skylake: Update DMIC DAIs and capabilitiesJeeja KP1-5/+18
On Skylake we can support upton 4DMICs on the PDM port, so update the PCM capabilities accordingly Also add a new DAI for DMIC pin which can be used for getting raw DMIC data Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-01ASoC: hdac_hdmi: check error returnSudip Mukherjee1-3/+4
As hdac->num_nodes is unsigned we can not check if snd_hdac_get_sub_nodes() has returned error or success. Lets have a temporary int to check the error value. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: Skylake: Move up pipe mem freeVinod Koul1-1/+1
The MCPS is freed first thing in pmd events but non memory. So if we face error during teardown we leak this mem, so move the code up Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: Skylake: Poll CLDMA RUN bit when setJeeja KP1-14/+29
This patch adds polling of CLDMA stream run bit when set to confirm the HW reports the same value. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: Skylake: Update pcm capabilityJeeja KP1-3/+6
This patch adds pcm capability to support 16/8k rates and 32 bit formats Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: Skylake: Fix to update bit depth for module paramsJeeja KP1-2/+18
Module hw param fixup will change the valid bit depth based on the fixup flag. If valid bit depth changes, need to set the bit depth according to valid bit depth. This patch fixes this issue of updating bit depth correctly. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: Skylake: Reconfigure HDA stream register in prepare/resumeJeeja KP1-5/+7
PCM prepare callbacks can be called multiple times. During S3 the stream registers will be reset when Controller is reset. When stream is resumed, these stream registers needs to reconfigured. This patch removes the check in prepare callback() if stream already prepared, which will allow reconfiguring of stream registers and also decouple stream when stream is resumed to route audio via DSP. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: dapm: add a dapm sink widgetVinod Koul2-0/+9
DAPM models various widgets but lacks a sink widget. DSPs can have modules which take audio data, process it and are capable of generating events thus acting as a sink of data. To make the dapm graph complete for such paths we need a dapm sink widget for these modules, so add a SND_SOC_DAPM_SINK to declare such a widget. This widget will be treated as SND_SOC_DAPM_EP_SINK endpoint in the dapm graph Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-25ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-inJie Yang4-9/+7
The previous commit ef3e199a49c8 ("ASoC: Intel: sst: only use sst-firmware when DW DMAC is available") does not fix the 0day building errors thoroughly: sound/built-in.o: In function 'dw_dma_remove' sound/built-in.o: In function 'dw_dma_probe' Here we fallback to select sst-firmware only when DW DMAC is built-in selected. We may need to refactor sst common driver and split DW related codes to platform driver, but ATM, this fallback may be the smallest fix. Please be noticed that after applying this patch, we may need select DW DMAC manually in DMA driver menu, before we can prompt and select HSW/BDW and old BYT machines. Signed-off-by: Jie Yang <yang.jie@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23ASoC: hdac: Fix Makefile and Kconfig sortingMark Brown2-8/+8
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-23ASoC: hdac_hdmi: fix possible NULL dereferenceSudip Mukherjee1-0/+2
kzalloc() can return NULL if it fails, and then we will be dereferencing a NULL pointer. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-22ASoC: hdac-hdmi: make driver select CONFIG_HDMIVinod Koul1-0/+1
Since driver use infoframe symbols from video/hdmi.c we should select this symbol for this driver Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-22ASoC: Intel: Skylake: Fix test of a field addressVinod Koul1-4/+2
Skylake driver uses snd_dma_buffer for data and buffer, these are variables and not pointer so do not test field addresses. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: hdac_hdmi: Use i915 component framework for PMSubhransu S. Prusty1-0/+25
Use the component framework to keep the display on till the playback in progress. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: hdac_hdmi: Setup and start infoframeSubhransu S. Prusty1-0/+61
This patch uses hdmi framework in video to fill audio infoframe. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: hdac_hdmi: Add hdac hdmi dai opsSubhransu S. Prusty1-0/+162
The DAI ops are used for triggering HDMI streams and configuring the parameters Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: hdac_hdmi: Add PM support for HDMISubhransu S. Prusty1-0/+64
Power up/down the AFG node during runtime resume/suspend. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: hdac-hdmi: Add hdmi driverSubhransu S. Prusty3-0/+351
This adds HDA based HDMI driver to be used in platforms like SKL and onwards Register the hdmi driver with hda bus and register dais. Also parse the widget and initialize identified pin and converter widgets. For simplification, currently only one pin and one converter widget are enabled on board, as well as limit the rates supported to simples ones and not based on ELD. This things will come eventually once basic support for this is merged Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21Merge branch 'topic/hdac' of ↵Mark Brown1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2015-11-21ALSA: hdac: structure definition for ext_dma_paramsSubhransu S. Prusty1-0/+6
This extends the structure definition of ext_device and adds definition for dma_params which will be used when hdmi codec. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21ASoC: Intel: pass correct parameter in sst_alloc_stream_mrfld()Dan Carpenter1-1/+1
"data" is always NULL in this function. I think we should be passing "&data" to sst_prepare_and_post_msg() instead of "data". Fixes: 3d9ff34622ba ('ASoC: Intel: sst: add stream operations') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Dinesh Mirche <dinesh.mirche@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20ASoC: Intel: Skylake: Update the rtd queryVinod Koul1-4/+2
sound card rtd was an array and was updated to a list so update the driver to use a list Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-20Merge branch 'topic/pcm-list' of ↵Mark Brown21-190/+307
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2015-11-18ASoC: Intel: Skylake: Add pm ops for skl_rt286 machineJeeja KP1-0/+1
The PM ops are required so that DAPM will suspend and resume the DSP pipelines properly Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: Intel: Skylake: Constrain the audio devicesVinod Koul1-0/+49
In ref configuration for Skylake, we support only 16bit, 48KHz, stereo audio, so specify these as constrains for the devices Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: Intel: Skylake: Fix null ptr dereferenced in skl_tplg_bind_sinksJeeja KP1-3/+3
This patch fixes the below warning form smatch and makes the skl_tplg_bind_sinks take the next sink as argument which is true when the current sink is valid sound/soc/intel/skylake/skl-topology.c:453 skl_tplg_bind_sinks() error: we previously assumed 'sink' could be null (see line 452) sound/soc/intel/skylake/skl-topology.c 451 452 if (!sink) ^^^^ New check. Reversed? 453 return skl_tplg_bind_sinks(sink, skl, src_mconfig); ^^^^ This is dereferenced inside the function. 454 455 return 0; Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-18ASoC: Intel: Skylake: Fix CLDMA buffer wrap caseJeeja KP1-0/+15
When downloading the firmware/module, if the ring buffer boundary is reached, we need to wrap to the zeroth position. On next copy we need to copy till end of buffer and the remaining buffer needs to be copied from zeroth position. In this case copy was not handled correctly when wrap condition is reached which caused invalid data to be copied resulting in invalid hash failure. This patch fixes the issue by handling copy at the boundary condition correctly. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 11:27:47 +0300