summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-01-28mmc: dw_mmc: exynos: remove incorrect __exit_p()Dmitry Torokhov1-1/+1
dw_mci_pltfm_remove() is not (nor should it be) marked as __exit, so we should not be using __exit_p() wrapper with it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: Fix menuconfig alignment of MMC_SDHCI_* optionsJean Delvare1-0/+1
Let MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER depend on MMC_SDHCI. Not only this is more correct, but this also avoids breaking the alignment of all other MMC_SDHCI_* options in menuconfig. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Chris Ball <chris@printf.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: Enable Ricoh MMC quirk by defaultJean Delvare1-0/+1
Config option MMC_RICOH_MMC's help text reads: If unsure, say Y. However the option defaults to N. Set the default to Y to match the recommendation in the help text. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Chris Ball <chris@printf.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Philipl Langdale <philipl@overt.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: mmci: Get rid of dead code in mmci_dma_setupPramod Gurav1-5/+0
DMA configuration has been removed from function mmci_dma_setup but the local mask variable was not removed. This remains unused hence remove it from the function and operations on it Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: sdhci-pxav3: fix race between runtime pm and irqJisheng Zhang1-10/+5
This patch is to fix a race condition that may cause an unhandled irq, which results in big sdhci interrupt numbers and endless "mmc1: got irq while runtime suspended" msgs before v3.15. Consider following scenario: CPU0 CPU1 sdhci_pxav3_runtime_suspend() spin_lock_irqsave(&host->lock, flags); sdhci_irq() spining on the &host->lock host->runtime_suspended = true; spin_unlock_irqrestore(&host->lock, flags); get the &host->lock runtime_suspended is true now return IRQ_NONE; Fix this race by using the core sdhci.c supplied sdhci_runtime_suspend_host() in runtime suspend hook which will disable card interrupts. We also use the sdhci_runtime_resume_host() in the runtime resume hook accordingly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: block: Remove unnecessary temporary variableTobias Klauser1-3/+1
Directly return the result of mmc_blk_alloc_req() instead of assigning and returning the variable md. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: pwrseq_simple: Add support for a reset GPIO pinUlf Hansson1-0/+38
The need for reset GPIOs has several times been pointed out from erlier posted patchsets. Especially some WLAN chips which are attached to an SDIO interface may use a GPIO reset. The reset GPIO is asserted at initialization and prior we start the power up procedure. The GPIO will be de-asserted right after the power has been provided to the card, from the ->post_power_on() callback. Note, the reset GPIO is optional. Thus we don't return an error even if we can't find a GPIO for the consumer. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28mmc: pwrseq: Initial support for the simple MMC power sequence providerUlf Hansson4-2/+111
To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28mmc: pwrseq: Document DT bindings for the simple MMC power sequenceUlf Hansson2-0/+34
To support SOCs which specifies specific MMC power sequences, document some MMC DT bindings to be able to describe these hardwares. Let's also document bindings for a simple MMC power sequence provider, which purpose is to support a set of common properties between various SOCs. In this initial step, let's also document a top level description of the MMC power sequence and describe the compatible string used for the simple MMC power sequence provider. The simple MMC power sequence provider will initially support a reset GPIO. From several earlier posted patches, it's clear that such hardware exists. Especially some WLAN chips which are attached to an SDIO interface may use a GPIO reset. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28mmc: core: Initial support for MMC power sequencesUlf Hansson6-2/+103
System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-21mmc: sdhci-pxav3: Remove checks for optional core clock in error/remove pathJisheng Zhang1-4/+2
Commit 63589e92c2d9 ("clk: Ignore error and NULL pointers passed to clk_{unprepare, disable}()") allows NULL or error pointer to be passed unconditionally. This patch is to simplify probe error and remove code paths. However, we reserve the core clock checks in runtime suspend/resume code because we want a little smaller latency. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: check sg_count before long data xferMicky Ching1-2/+9
Check sg_count before sending long data xfer. Because dma_map_sg() return int, and sg_count may be negative, so using int instead of unsigned. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: rtsx: finish request if no card existMicky Ching1-2/+7
Return error-code directly if no card exist, this can make card remove faster. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: sdhci: host: fix odd_ptr_err.cocci warningsWu Fengguang1-1/+1
drivers/mmc/host/sdhci_f_sdh30.c:143:5-11: inconsistent IS_ERR and PTR_ERR, PTR_ERR on line 144 PTR_ERR should access the value just tested by IS_ERR Semantic patch information: There can be false positives in the patch case, where it is the call IS_ERR that is wrong. Generated by: scripts/coccinelle/tests/odd_ptr_err.cocci CC: Vincent Yang <vincent.yang.fujitsu@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: vub300: remove unreachable return value handlingNicholas Mc Guire1-3/+1
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-21mmc: block: fix format string warningAsaf Vertz1-1/+1
Fixed the following warning (reported by cppcheck): [drivers/mmc/card/block.c:2149]: (warning) %d in format string (no. 1) requires 'int' but the argument type is 'unsigned int'. Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20Merge branch 'tmio' into nextUlf Hansson7-151/+166
2015-01-20mmc: tmio: remove TMIO_MMC_HAVE_CTL_DMA_REG flagKuninori Morimoto3-13/+0
tmio_mmc_host has .enable_dma callback now. We don't need TMIO_MMC_HAVE_CTL_DMA_REG anymore. Let's remove it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: enable 32bit DMA accessKuninori Morimoto1-9/+33
Now, sh_mobile_sdhi can use 32bit DMA access in R-Cer Gen2. Let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: use .enable_dmaKuninori Morimoto1-0/+6
tmio_mmc_dma has .enable_dma callback now. let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: add new macro for mmc_host to sh_mobile_sdhiKuninori Morimoto1-2/+4
getting struct sh_mobile_sdhi from struct mmc_host needs to use complex container_of(). This patch adds new host_to_priv macro to get it easily. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: tidyup mmc_data->bus_shift for latest SoCKuninori Morimoto1-1/+4
Latest SDHI on Renesas has expand register mapping. update mmc_data->bus_shift for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sh_mobile_sdhi: remove .init/.cleanupKuninori Morimoto2-40/+1
No one is using .init/.cleanup callback function. Let's remove these. sdhi_ops and .cd_wakeup are also removed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: enable SoC specific DMA buswidth settingsKuninori Morimoto2-2/+8
Renesas SDHI which is based on TMIO driver has 2 type SoC. 1st one is used as SH-Mobile series, and 2nd is R-Car series. R-Car series SoC has DMA buswidth setting register which enables 32bit access. This patch adds .dma_buswidth and enables it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: add .enable_dma on tmio_mmc_dmaKuninori Morimoto2-0/+5
Some controllers need DMA special register/setting. This patch adds new .enable_dma callback for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_data has .dma_rx_offsetKuninori Morimoto4-3/+3
Current .dma_rx_offset is implemented under tmio_mmc_dma. It goes to tmio_mmc_data by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_data has .alignment_shiftKuninori Morimoto4-5/+5
Current .alignment_shift is implemented under tmio_mmc_dma. It goes to tmio_mmc_data by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .bus_shiftKuninori Morimoto5-15/+15
Current .bus_shift is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .multi_io_quirkKuninori Morimoto4-7/+5
Current .multi_io_quirk is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .clk_disableKuninori Morimoto4-5/+5
Current .clk_disable is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .clk_enableKuninori Morimoto4-5/+4
Current .clk_enable is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .write16_hookKuninori Morimoto4-6/+5
Current .write16_hook is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: tmio_mmc_host has .dmaKuninori Morimoto4-26/+24
Current .dma is implemented under tmio_mmc_data. It goes to tmio_mmc_host by this patch. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: tmio: add tmio_mmc_host_alloc/free()Kuninori Morimoto5-24/+51
Current tmio_mmc driver is using tmio_mmc_data for driver/platform specific data/callback, and it is needed for tmio_mmc_host_probe() function. Because of this style, include/linux/mfd/tmio.h header has tmio driver/framework specific data which is not needed from platform. This patch adds new tmio_mmc_host_alloc/free() as cleanup preparation. tmio driver specific data/callback will be implemented in tmio_mmc_host, and platform specific data/callback will be implemented in tmio_mmc_data in this cleanup. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: host: add new f_sdh30Vincent Yang4-0/+279
This patch adds new host controller driver for Fujitsu SDHCI controller f_sdh30. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Andy Green <andy.green@linaro.org> Signed-off-by: Tetsuya Takinishi <t.takinishi@jp.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a quirk for single block transactionsVincent Yang2-3/+7
This patch defines a quirk to disable the block count for single block transactions. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a quirk for tuning work aroundVincent Yang2-0/+4
This patch defines a quirk for tuning work around for some sdhci host controller. It sets both SDHCI_CTRL_EXEC_TUNING and SDHCI_CTRL_TUNED_CLK for tuning. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-20mmc: sdhci: add a voltage switch callback functionVincent Yang2-0/+5
This patch adds a callback function to do controller-specific actions when switching voltages. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <Vincent.Yang@tw.fujitsu.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: dw_mmc: Power on vqmmc in MMC_POWER_ON, not MMC_POWER_UPDoug Anderson1-4/+6
If we power up vqmmc in MMC_POWER_ON then we end up turning it on before mmc_power_up() sets the signal voltage. That's not so great since we might be powering it up at the wrong voltage. Note that this is how Yuvaraj originally coded things up in <https://patchwork.kernel.org/patch/4401231/> but he changed it on my suggestion. Apparently I was wrong. Reported-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: host: sdhci: Added a space before (Mohammad Jamal1-1/+1
This patch solves the coding style issue by adding a space before ( Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-pxav3: fix pm unbalanced issue in -> remove()Jisheng Zhang1-1/+3
This patch calls pm_runtime_put_noidle() to restore the device's usage counter in the ->remove() implementation. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-pxav3: fix unbalanced clock issues during probeJisheng Zhang1-3/+4
Commit 0dcaa2499b7d ("sdhci-pxav3: Fix runtime PM initialization") tries to fix one hang issue caused by calling sdhci_add_host() on a suspended device. The fix enables the clock twice, once by clk_prepare_enable() and another by pm_runtime_get_sync(), meaning that the clock will never be gated at runtime PM suspend. I observed the power consumption regression on Marvell BG2Q SoCs. In fact, the fix is not correct. There still be a very small window during which a runtime suspend might somehow occur after pm_runtime_enable() but before pm_runtime_get_sync(). This patch fixes all of the two problems by just incrementing the usage counter before pm_runtime_enable(). It also adjust the order of disabling runtime pm and storing the usage count in the error path to handle clock gating properly. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: <stable@vger.kernel.org> # v3.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci: Always init buf_ready_intAdrian Hunter1-2/+2
There is no point making the initialization of buf_ready_int conditional on host version. Simplify by just doing it always. Note that the other conditional initializations will be removed when the new way of doing re-tuning is taken into use. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: Move mmc_card_removed() into mmc_start_request()Adrian Hunter1-12/+20
Both callers of mmc_start_request() call mmc_card_removed() so move that call into mmc_start_request(). This patch is preparation for adding re-tuning support. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: core: Simplify by adding mmc_execute_tuning()Adrian Hunter5-32/+36
For each MMC, SD and SDIO there is code that holds the clock, calls ops->execute_tuning, and releases the clock. Simplify the code a bit by providing a separate function to do that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: omap_hsmmc: use mmc_of_parse to parse common mmc configuration.NeilBrown1-25/+8
This ensures that all standard options are available to hsmmc, In particular, I need cap-power-off-card. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: omap_hsmmc: use slot-gpio library for gpio support.NeilBrown1-54/+13
Using the common code removes some code duplication, and makes it easier to switch to using mmc_of_parse() which will remove more duplication. This uses the new mmc_gpio_request_cd_isr to provide a non-standard interrupt service routine for card-detect interrupts. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: slot-gpio: Allow host driver to provide isr for card-detect interruptsNeilBrown2-1/+19
One of the reasons omap_hsmmc doesn't use the slot-gpio library is that it has some non-standard functionality in the card-detect interrupt service routine. To make it possible for omap_hsmmc (and maybe others) to be converted to use slot-gpio, add 'mmc_gpio_request_cd_isr' which provide an alternate isr to be register by the slot-gpio code. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sdhci-acpi: fix copy'n'paste typos in the commentsAndy Shevchenko1-3/+3
Just fix the comments, no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-19mmc: sd: add reset bus_ops callbackJohan Rudholm1-0/+7
Enable power cycle and re-initialization of SD cards via the reset bus_ops. Power cycling a buggy SD card sometimes helps it get back on track. Signed-off-by: Johan Rudholm <johanru@axis.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-08 20:13:35 +0300