summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-11-22nl80211: add testmode to the list of supported commandsKalle Valo1-0/+4
User space might want to test if driver supports testmode. Adding testmode to the list of supported commands makes this easier. I omitted testmode_dump() in purpose. I assume all drivers implementing testmode_dump() will also implement testmode_cmd(). Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: remove unused ASSOC_AP flagJohannes Berg3-5/+2
WLAN_STA_ASSOC_AP indicates that the station entry is for an AP we're associated to but isn't used so remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: transmit fragment list to driversJohannes Berg4-40/+86
Drivers can usually handle fragmented packets much easier when they get the entire list of fragments at once. The only thing they need to do is keep enough space on the queues for up to ten fragments of a single MSDU. This allows them to implement this with a new operation tx_frags. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: make TX LED handling independent of fragmentationJohannes Berg1-12/+16
This just prepares for passing the entire fragment list to the driver. No significant changes, but the TX throughput is calculated slightly differently now and we blink only once for each MSDU. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: move fragment flag adjustmentJohannes Berg1-9/+9
Instead of adjusting the fragment flags at TX time, adjust them at fragmentation time. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22mac80211: use skb list for fragmentsJohannes Berg5-71/+82
We are currently linking the skbs by using skb->next directly. This works, but the preferred way is to use a struct sk_buff_head instead. That also prepares for passing that to drivers directly. While at it I noticed we calculate the duration for fragments twice -- remove one of them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22ath9k: trivial: reorder rx_tasklet processingZefir Kurtisi1-5/+5
DFS events are reported as PHY errors and need to be processed with a correct timestamp set before ath9k_skb_preprocess() is called and the frame is possibly dropped. This patch puts the rxs->mactime calculation before the skb is preprocessed to prepare for DFS event reporting. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22cfg80211: pass DFS region to drivers through reg_notifier()Luis R. Rodriguez2-0/+7
This grants drivers access to the DFS region that a regulatory domain belongs to. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22cfg80211: process regulatory DFS region for countriesLuis R. Rodriguez5-0/+75
The wireless-regdb now has support for mapping a country to one DFS region. CRDA sends this to us now so process it so we can provide that hint to drivers. This will later be used by code for processing DFS in a way that meets the criteria for the DFS region the country belongs to. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Merge branch 'for-linville' of git://github.com/sgruszka/iwlegacyJohn W. Linville70-36234/+34525
2011-11-18mwifiex: add support for Marvell sd8797 deviceBing Zhao8-20/+50
This patch supports Marvell chipset 88W8797 (Avastar) with SDIO interface. The corresponding firmware image file is located at: "mrvl/sd8797_uapsta.bin" Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Tristan Xu <xurf@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18p54spi: Remove FIXME in op_stopMichael Büsch1-5/+1
Don't use the interruptible variant of mutex_lock(). It doesn't really need to be interruptible. This avoids nasty error handling. Signed-off-by: Michael Buesch <m@bues.ch> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: call ieee80211_recalc_idle() after sending packetsFelix Fietkau2-8/+11
Some drivers (e.g. ath9k) assume that it's safe to go into low-power mode immediately after the idle state changes. To support that, mac80211 even calls drv_flush() before that happens. In some instances, mac80211 sent a packet right after recalculating the idle state, this patch fixes that. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18wireless: use strlcpy routine in .get_drvinfoRick Jones5-13/+16
Convert various seemingly still compiled wireless drivers' .get_drvinfo routines to use the preferred strlcpy() routine. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18minstrel_ht: Remove unused function parametersPatrick Kelle1-14/+12
Remove unused function parameters in the following functions: minstrel_calc_rate_ewma() minstrel_ht_calc_tp() minstrel_aggr_check() minstrel_ht_set_rate() Signed-off-by: Patrick Kelle <patrick.kelle81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: memory leak in mesh_queue_preq()Dan Carpenter1-0/+1
We recently introduced a return here, but we need to call kfree first. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: use kfree_skb() instead of kfree()Dan Carpenter1-1/+1
sk_buff structs should be freed using kfree_skb(). This was introduced recently in 029458212 "mac80211: Save probe response data for bss". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: Get rid of search loop for rate group indexHelmut Schaa1-16/+16
Finding the group index for a specific rate is done by looping through all groups and returning if the correct one is found. This code is called for each tx'ed frame and thus it makes sense to reduce its runtime. Do this by calculating the group index by this formula based on the SGI and HT40 flags as well as the stream number: idx = (HT40 * 2 * MINSTREL_MAX_STREAMS) + (SGI * MINSTREL_MAX_STREAMS) + (streams - 1) Hence, the groups are ordered by th HT40 flag first, then by the SGI flag and afterwards by the number of used streams. This should reduce the runtime of minstrel_ht_get_group_idx considerable. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: Check rate->idx before rate->countHelmut Schaa1-2/+2
The drivers are not required to fill in rate->count if rate->idx is set to -1. Hence, we should first check rate->idx before accessing rate->count. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18mac80211: remove crypto special case for auth framesJohannes Berg1-2/+0
The shared key authentication frame that needs to be encrypted (the third one in the shared key handshake) is directly encrypted in ieee80211_send_auth and the IEEE80211_TX_INTFL_DONT_ENCRYPT is set. All others are not encrypted, so the only way to get to this is erroneously on no-monitor AP side. Remove the special case for authentication frames to fix the AP shared key side when operating without cooked monitor interfaces -- with cooked monitor the IEEE80211_TX_INTFL_DONT_ENCRYPT also gets set, so we never get here -- an AP never encrypts auth frames. Without this patch, an AP operating in WEP mode with my no-monitor patches would erroneously encrypt all authentication frames, instead of none. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18brcmsmac: Use current logging stylesJoe Perches2-79/+80
Add and use pr_fmt and pr_<level> Remove useless double parentheses from macros. Remove function names from format strings, add to pr_debug use. Coalesce formats. Remove uncompileable undeclared variable in a DMA_NONE use. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18NFC: Fix indentation in nci.h fileIlan Elias1-42/+42
Fix indentation in nci.h file. Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18ath9k_hw: set btcoex weights for AR9462Rajkumar Manoharan3-4/+37
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18ath9k_hw: Cleanup btcoex wlan weightsRajkumar Manoharan4-58/+34
Remove all wlan weight macros and group it together for better understanding & readability. It makes the code reusable for AR9462 wlan weights. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18ath9k: Remove enabling btcoex from stomp type changeRajkumar Manoharan3-4/+4
This patch removes btcoex_enable from stomp type change and let it be called from callee functions that makes the code can be reusable for MCI changes. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-18Merge branch 'for-linville' of git://github.com/kvalo/ath6klJohn W. Linville22-2160/+4338
2011-11-16iwlegacy: debugfs_ops should depend on CONFIG_IWLEGACY_DEBUGFSGreg Dietsche5-42/+8
Only setup structs related to debugfs_ops when CONFIG_IWLEGACY_DEBUGFS is set. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965-rs: cleanup il4965_rs_sta_dbgfs_rate_scale_data_readGreg Dietsche1-7/+1
1) remove ret local var and return the result directly 2) remove il since it is not used Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965-rs: don't return rate from il4965_rs_update_rate_tblGreg Dietsche1-9/+3
1) don't return rate from il4965_rs_update_rate_tbl 2) fix up il4965_rs_rate_scale_perform Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965-rs: il4965_rs_alloc_sta: remove lq_sta local varGreg Dietsche1-4/+1
remove the lq_sta local variable and return the result directly in il4965_rs_alloc_sta Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965-rs: remove unnecessary null check for sta and lq_staGreg Dietsche1-3/+0
both sta and lq_sta are guaranteed to be not null in the calling function so we don't need to check them here. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965-rs: remove null check on sta in il4965_rs_tx_statusGreg Dietsche1-1/+1
the null check on sta in il4965_rs_tx_status is not necessary Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-16iwlegacy: 4965: remove vif null check in request_scanGreg Dietsche1-2/+1
remove null check on vif in il4965_request_scan Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: remove unused IL_AC_UNSET defineStanislaw Gruszka1-2/+0
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: change IL_ERR to D_HT in iwl4965_rs_tl_turn_on_agg_for_tidGreg Dietsche1-4/+4
This message should be a debug message and not an error. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: change IL_WARN to D_HT in il4965_tx_agg_startGreg Dietsche1-1/+1
This message should be a debug message and not a warning. Signed-off-by: Greg Dietsche <Gregory.Dietsche@cuw.edu> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: checkpatch.pl fixesStanislaw Gruszka14-411/+297
Fix most checkpatch.pl ERRORs and some WARNINGs. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: indentions and whitespacesStanislaw Gruszka17-6456/+6439
Process iwlegacy source files using: indent -npro -l500 -nhnl indent -npro -kr -i8 -ts8 -sob -l80 -nbbo -ss -ncs -cp1 -il0 -psl Plus manual compilation fixes. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge iwl-debug.h into common.hStanislaw Gruszka7-209/+165
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: rename iwl-debug.c to debug.cStanislaw Gruszka2-1/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge iwl-fh.h into 4965.hStanislaw Gruszka2-418/+351
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: use FH49_ prefix in 4965 codeStanislaw Gruszka4-153/+153
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: use FH39_ prefix in 3945 codeStanislaw Gruszka2-3/+3
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: rename iwl-prph.h to prph.hStanislaw Gruszka3-2/+1
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge iwl-{eeprom,led}.h into common.hStanislaw Gruszka8-412/+303
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge iwl-power.h into common.hStanislaw Gruszka5-58/+12
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge iwl-legacy-rs.h into common.hStanislaw Gruszka2-473/+442
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: remove iwl-helpers.hStanislaw Gruszka1-187/+0
This file was already merged into common.h Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: merge common header filesStanislaw Gruszka18-2023/+2003
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
2011-11-15iwlegacy: rename iwl-core.h to common.hStanislaw Gruszka11-10/+10
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-27 08:23:59 +0300