summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-03-26Merge tag 'arizona-extcon-asoc' of ↵Greg Kroah-Hartman640-3310/+5850
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into char-misc-next Mark writes: ASoC/extcon: arizona: Fix interaction between HPDET and headphone outputs This patch series covers both ASoC and extcon subsystems and fixes an interaction between the HPDET function and the headphone outputs - we really shouldn't run HPDET while the headphone is active. The first patch is a refactoring to make the extcon side easier.
2013-03-26extcon: arizona: Fix interaction between headphone outputs and identificationMark Brown1-14/+30
Running HPDET while the headphone outputs are enabled can disrupt the operation of HPDET. In order to avoid this HPDET needs to disable the headphone outputs and ASoC needs to not enable them while HPDET is running. For extcon instead of checking if the headphone output is enabled when doing magic application unconditionally disable the output and restore the state which ASoC wants set when undoing the magic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26ASoC: arizona: Fix interaction between headphone outputs and identificationMark Brown5-8/+47
Running HPDET while the headphone outputs are enabled can disrupt the operation of HPDET. In order to avoid this HPDET needs to disable the headphone outputs and ASoC needs to not enable them while HPDET is running. Do the ASoC side of this by storing the enable state in the core driver structure and only writing to the device if a flag indicating that the accessory detection side is in a state where it can have the headphone output stage enabled. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26extcon: arizona: Factor out magic applicationMark Brown1-55/+36
We have a very similar sequence doing magic writes in several places (one of which missed an update to interlock with the CODEC driver) so factor it out into a function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-26Drivers: hv: balloon: make local functions staticWei Yongjun1-2/+2
local functions that could be static. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26dummy-irq: introduce a dummy IRQ handler driverJiri Kosina3-0/+68
This module accepts a single 'irq' parameter, which it should register for. Its sole purpose is to help with debugging of IRQ sharing problems, by force-enabling IRQ that would otherwise be disabled. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26mei: add mei_irq_compl_handler functionTomas Winkler3-26/+34
similar to read/write add also irq completion handler that is called for the irq thread rename missnamed mei_irq_complete_handler to mei_cl_complete_handler as it operates on a single client Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: Load the correct custom config values from dtLokesh Vutla1-3/+4
of_get_property returns value in Big Endian format. Before using this value it should be converted to little endian using be32_to_cpup(). Custom configs of emif are read from dt using of_get_property, but these are not converted to litte endian format. Correcting the same here. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: errata i743: Prohibit usage of Power-Down modeGrygorii Strashko1-0/+35
ERRATA DESCRIPTION : The EMIF supports power-down state for low power. The EMIF automatically puts the SDRAM into power-down after the memory is not accessed for a defined number of cycles and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4. As the EMIF supports automatic output impedance calibration, a ZQ calibration long command is issued every time it exits active power-down and precharge power-down modes. The EMIF waits and blocks any other command during this calibration. The EMIF does not allow selective disabling of ZQ calibration upon exit of power-down mode. Due to very short periods of power-down cycles, ZQ calibration overhead creates bandwidth issues and increases overall system power consumption. On the other hand, issuing ZQ calibration long commands when exiting self-refresh is still required. WORKAROUND : Because there is no power consumption benefit of the power-down due to the calibration and there is a performance risk, the guideline is to not allow power-down state and, therefore, to not have set the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4. This is applicable only for EMIF4D IP used in OMAP4 Soc's. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vitaly Chernooky <vitaly.chernooky@ti.com> Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: Fix the incorrect 'size' parameter in memcpyOleksandr Dmytryshyn1-1/+1
The issue was that only the first timings table was added to the emif platform data at the emif driver registration. All other timings tables was filled with zeros. Now all emif timings table are added to the platform data. Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: use restart if power_off not present when out of specNishanth Menon1-1/+9
Some machine or kernel variants might have missed implementation of power off handlers. We DONOT want to let the system be in "out of spec" state in this condition. So, WARN and attempt a machine restart in the hopes of clearing the out-of-spec temperature condition. NOTE: This is not the safest option, but safer than leaving the system in unstable conditions. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: Handle devices which are not rated for >85CNishanth Menon2-0/+28
As per JESD209-2E specification for LPDDR2, http://www.jedec.org/standards-documents/results/jesd209-2E Table 73, LPDDR2 memories come in two flavors - Standard and Extended. The Standard types can operate from -25C to +85C However, beyond that and upto +105C can only be supported by Extended types. Unfortunately, it seems there is no info in MR0(device info) or MR[1,2](device feature) for run time detection of this capability as far as seen on the spec. Hence, we provide a custom_config flag to be populated by platforms which have these "extended" type memories. For the "Standard" memories, we need to consider MR4 notifications of temperature triggers >85C as equivalent to thermal shutdown events (equivalent to Spec specified thermal shutdown events for "extended" parts). Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: handle overflow for timing for LP modeNishanth Menon1-8/+28
In case the custom timings provide values which overflow the maximum possible field value, warn and use maximum permissible value. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: setup LP settings on freq updateAmbresh K1-0/+2
Program the power management shadow register on freq update Else the concept of threshold frequencies dont really matter as the system always uses the performance mode timing for LP which is programmed in at init time. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26memory: emif: Fix the lpmode timeout calculationLokesh Vutla1-3/+7
The driver tries to round up the specified timeout cycles to the next power of 2 value. This should be done defore updating timeout variable. Correcting this here. Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26drivers: char: Use PTR_RET functionAlexandru Gheorghiu1-1/+1
Used PTR_RET function instead of IS_ERR and PTR_ERR. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25parport: use kmemdup instead of kmalloc + memcpySilviu-Mihai Popescu3-9/+6
This replaces calls to kmalloc followed by memcpy with a single call to kmemdup. This was found via make coccicheck. Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25parport: amiga: use module_platform_driver_probe()Fabio Porcedda1-14/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Matt Porter <mporter@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25MAINTAINERS: add ssbiDavid Brown1-0/+1
The ssbi device is specific to the Qualcomm MSM SoCs. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25SSBI: Remove MSM_ prefix from SSBI driversDavid Brown7-64/+64
Although the SSBI sub is currently only used on MSM SoCs, it is still a bus in its own right. Remove this msm_ prefix from the driver and it's symbols. Clients can now refer directly to ssbi_write() and ssbi_read(). Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25ssbi: Remove extraneous loggingDavid Brown1-15/+1
Remove some unhelpful error logs. This also removes the necessity of having a pointer back to the struct device within the ssbi-specific structure Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25ssbi: Use regular init levelDavid Brown1-1/+1
With device tree, and deferred probe, it is no longer necessary to make sure that the ssbi bus driver is initialized very early. Restore to a regular module_init(). Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25ssbi: Comment the use of udelay()David Brown1-0/+13
The ssbi driver uses a busywait loop to read its status register. Add a comment explaining the timing of the device itself so that future developers can better understand this delay, and possibly diagnose any problems. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25SSBI: Convert SSBI to device treeDavid Brown4-49/+62
The SSBI bus is exclusive to the Qualcomm MSM targets, and all SoCs using it will be using device tree. Convert this driver to indentify with device tree. This makes the bus probing a good bit simpler, since the attaching of child nodes can be represented directly in the devicetree, rather than having to be inferred by name. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25ssbi: Allow compilation as a moduleDavid Brown2-12/+1
The ssbi driver's read/write entry points are protected with wrappers in the case when the driver isn't enabled. These wrappers don't make any sense, since a client of the SSBI bus won't work without it. Make these just regular functions, so that the SSBI driver can be built as a module. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25ssbi: Fix exit mismatch in remove functionDavid Brown1-1/+1
msm_ssbi_remove is referenced with __exit_p, but not declared with __exit. This causes a warning when the driver is not built as a module: drivers/ssbi/ssbi.c:341:23: warning: 'msm_ssbi_remove' defined but not used [-Wunused-function] The remove is needed for unbinding to work, even if not compiled as a module, so just remove it. Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25fix: Use EXPORT_SYMBOL_GPLDavid Brown1-2/+2
Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25add single-wire serial bus interface (SSBI) driverKenneth Heitke6-0/+466
SSBI is the Qualcomm single-wire serial bus interface used to connect the MSM devices to the PMIC and other devices. Since SSBI only supports a single slave, the driver gets the name of the slave device passed in from the board file through the master device's platform data. SSBI registers pretty early (postcore), so that the PMIC can come up before the board init. This is useful if the board init requires the use of gpios that are connected through the PMIC. Based on a patch by Dima Zavin <dima@android.com> that can be found at: http://android.git.kernel.org/?p=kernel/msm.git;a=commitdiff;h=eb060bac4 This patch adds PMIC Arbiter support for the MSM8660. The PMIC Arbiter is a hardware wrapper around the SSBI 2.0 controller that is designed to overcome concurrency issues and security limitations. A controller_type field is added to the platform data to specify the type of the SSBI controller (1.0, 2.0, or PMIC Arbiter). [davidb@codeaurora.org: I've moved this driver into drivers/ssbi/ and added an include for linux/module.h so that it will compile] Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-24Linux 3.9-rc4v3.9-rc4Linus Torvalds1-1/+1
2013-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds6-12/+29
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
2013-03-24Merge tag 'md-3.9-fixes' of git://neil.brown.name/mdLinus Torvalds6-47/+86
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
2013-03-23Merge tag 'upstream-linus' of ↵Linus Torvalds6-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata updates from Jeff Garzik: "Simple stuff. See one-line summaries." * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_samsung_cf: use module_platform_driver_probe() [libata] Avoid specialized TLA's in ZPODD's Kconfig libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource sata_fsl: Remove redundant NULL check before kfree ahci: Add Device IDs for Intel Wellsburg PCH ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
2013-03-23Merge branch 'i2c/for-current' of ↵Linus Torvalds5-4/+21
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "One bugfix for the tegra driver. Two updates regarding email addresses and MAINTAINERS which I like to have up-to-date so people can be reached immediately. While we are here, there is on PCI_ID addition." * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: add maintainer entry for atmel i2c driver i2c: Fix my e-mail address in drivers and documentation i2c: iSMT: add Intel Avoton DeviceIDs i2c: tegra: check the clk_prepare_enable() return value
2013-03-23Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2-121/+7
Pull watchdog fixes from Wim Van Sebroeck: "Fix a boot issues and correct the AcpiMmioSel bitmask in the sp5100_tco watchdog device driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: sp5100_tco: Set the AcpiMmioSel bitmask value to 1 instead of 2 watchdog: sp5100_tco: Remove code that may cause a boot failure
2013-03-23KMS: fix EDID detailed timing frame rateTorsten Duwe1-0/+1
When KMS has parsed an EDID "detailed timing", it leaves the frame rate zeroed. Consecutive (debug-) output of that mode thus yields 0 for vsync. This simple fix also speeds up future invocations of drm_mode_vrefresh(). While it is debatable whether this qualifies as a -stable fix I'd apply it for consistency's sake; drm_helper_probe_single_connector_modes() does the same thing already for all probed modes. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23KMS: fix EDID detailed timing vsync parsingTorsten Duwe1-1/+1
EDID spreads some values across multiple bytes; bit-fiddling is needed to retrieve these. The current code to parse "detailed timings" has a cut&paste error that results in a vsync offset of at most 15 lines instead of 63. See http://en.wikipedia.org/wiki/EDID and in the "EDID Detailed Timing Descriptor" see bytes 10+11 show why that needs to be a left shift. Cc: stable@vger.kernel.org Signed-off-by: Torsten Duwe <duwe@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds3-9/+60
Pull NVMe driver update from Matthew Wilcox: "These patches have mostly been baking for a few months; sorry I didn't get them in during the merge window. They're all bug fixes, except for the addition of the SMART log and the addition to MAINTAINERS." * git://git.infradead.org/users/willy/linux-nvme: NVMe: Add namespaces with no LBA range feature MAINTAINERS: Add entry for the NVMe driver NVMe: Initialize iod nents to 0 NVMe: Define SMART log NVMe: Add result to nvme_get_features NVMe: Set result from user admin command NVMe: End queued bio requests when freeing queue NVMe: Free cmdid on nvme_submit_bio error
2013-03-23Merge branch 'akpm' (fixes from Andrew)Linus Torvalds15-114/+159
Merge misc fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mqueue: sys_mq_open: do not call mnt_drop_write() if read-only mm/hotplug: only free wait_table if it's allocated by vmalloc dma-debug: update DMA debug API to better handle multiple mappings of a buffer dma-debug: fix locking bug in check_unmap() drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap() drivers/rtc/rtc-da9052.c: fix for rtc device registration mm: zone_end_pfn is too small poweroff: change orderly_poweroff() to use schedule_work() mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting printk: Provide a wake_up_klogd() off-case irq_work.h: fix warning when CONFIG_IRQ_WORK=n
2013-03-23mqueue: sys_mq_open: do not call mnt_drop_write() if read-onlyVladimir Davydov1-1/+2
mnt_drop_write() must be called only if mnt_want_write() succeeded, otherwise the mnt_writers counter will diverge. mnt_writers counters are used to check if remounting FS as read-only is OK, so after an extra mnt_drop_write() call, it would be impossible to remount mqueue FS as read-only. Besides, on umount a warning would be printed like this one: ===================================== [ BUG: bad unlock balance detected! ] 3.9.0-rc3 #5 Not tainted ------------------------------------- a.out/12486 is trying to release lock (sb_writers) at: mnt_drop_write+0x1f/0x30 but there are no more locks to release! Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Doug Ledford <dledford@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23mm/hotplug: only free wait_table if it's allocated by vmallocJianguo Wu1-1/+5
zone->wait_table may be allocated from bootmem, it can not be freed. Signed-off-by: Jianguo Wu <wujianguo@huawei.com> Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23dma-debug: update DMA debug API to better handle multiple mappings of a bufferAlexander Duyck1-5/+19
There were reports of the igb driver unmapping buffers without calling dma_mapping_error. On closer inspection issues were found in the DMA debug API and how it handled multiple mappings of the same buffer. The issue I found is the fact that the debug_dma_mapping_error would only set the map_err_type to MAP_ERR_CHECKED in the case that the was only one match for device and device address. However in the case of non-IOMMU, multiple addresses existed and as a result it was not setting this field once a second mapping was instantiated. I have resolved this by changing the search so that it instead will now set MAP_ERR_CHECKED on the first buffer that matches the device and DMA address that is currently in the state MAP_ERR_NOT_CHECKED. A secondary side effect of this patch is that in the case of multiple buffers using the same address only the last mapping will have a valid map_err_type. The previous mappings will all end up with map_err_type set to MAP_ERR_CHECKED because of the dma_mapping_error call in debug_dma_map_page. However this behavior may be preferable as it means you will likely only see one real error per multi-mapped buffer, versus the current behavior of multiple false errors mer multi-mapped buffer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23dma-debug: fix locking bug in check_unmap()Alexander Duyck1-9/+12
In check_unmap() it is possible to get into a dead-locked state if dma_mapping_error is called. The problem is that the bucket is locked in check_unmap, and locked again by debug_dma_mapping_error which is called by dma_mapping_error. To resolve that we must release the lock on the bucket before making the call to dma_mapping_error. [akpm@linux-foundation.org: restore 80-col trickery to be consistent with the rest of the file] Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Reviewed-by: Shuah Khan <shuah.khan@hp.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMRNicolas Ferre2-20/+31
On some revisions of AT91 SoCs, the RTC IMR register is not working. Instead of elaborating a workaround for that specific SoC or IP version, we simply use a software variable to store the Interrupt Mask Register and modify it for each enabling/disabling of an interrupt. The overhead of this is negligible anyway. The interrupt mask register (IMR) for the RTC is broken on the AT91SAM9x5 sub-family of SoCs (good overview of the members here: http://www.eewiki.net/display/linuxonarm/AT91SAM9x5 ). The "user visible effect" is the RTC doesn't work. That sub-family is less than two years old and only has devicetree (DT) support and came online circa lk 3.7 . The dust is yet to settle on the DT stuff at least for AT91 SoCs (translation: lots of stuff is still broken, so much that it is hard to know where to start). The fix in the patch is pretty simple: just shadow the silicon IMR register with a variable in the driver. Some older SoCs (pre-DT) use the the rtc-at91rm9200 driver (e.g. obviously the AT91RM9200) and they should not be impacted by the change. There shouldn't be a large volume of interrupts associated with a RTC. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reported-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23drivers/video/ep93xx-fb.c: include <linux/io.h> for devm_ioremap()H Hartley Sweeten1-0/+1
Commit be8678149701 ("drivers/video/ep93xx-fb.c: use devm_ functions") introduced a build error: drivers/video/ep93xx-fb.c: In function 'ep93xxfb_probe': drivers/video/ep93xx-fb.c:532: error: implicit declaration of function 'devm_ioremap' drivers/video/ep93xx-fb.c:533: warning: assignment makes pointer from integer without a cast Include <linux/io.h> to pickup the declaration of 'devm_ioremap'. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Ryan Mallon <rmallon@gmail.com> Cc: Damien Cassou <damien.cassou@lifl.fr> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23drivers/rtc/rtc-da9052.c: fix for rtc device registrationAshish Jangam1-5/+3
Add support for the virtual irq since now MFD only handles virtual irq Without this patch rtc device will fail in registration. (akpm: Ashish has a different version whcih will be needed for 3.8.x and earlier kernels) Signed-off-by: Ashish <ashish.jangam@kpitcummins.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23mm: zone_end_pfn is too smallRuss Anderson1-1/+1
Booting with 32 TBytes memory hits BUG at mm/page_alloc.c:552! (output below). The key hint is "page 4294967296 outside zone". 4294967296 = 0x100000000 (bit 32 is set). The problem is in include/linux/mmzone.h: 530 static inline unsigned zone_end_pfn(const struct zone *zone) 531 { 532 return zone->zone_start_pfn + zone->spanned_pages; 533 } zone_end_pfn is "unsigned" (32 bits). Changing it to "unsigned long" (64 bits) fixes the problem. zone_end_pfn() was added recently in commit 108bcc96ef70 ("mm: add & use zone_end_pfn() and zone_spans_pfn()") Output from the failure. No AGP bridge found page 4294967296 outside zone [ 4294967296 - 4327469056 ] ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:552! invalid opcode: 0000 [#1] SMP Modules linked in: CPU 0 Pid: 0, comm: swapper Not tainted 3.9.0-rc2.dtp+ #10 RIP: free_one_page+0x382/0x430 Process swapper (pid: 0, threadinfo ffffffff81942000, task ffffffff81955420) Call Trace: __free_pages_ok+0x96/0xb0 __free_pages+0x25/0x50 __free_pages_bootmem+0x8a/0x8c __free_memory_core+0xea/0x131 free_low_memory_core_early+0x4a/0x98 free_all_bootmem+0x45/0x47 mem_init+0x7b/0x14c start_kernel+0x216/0x433 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0x144/0x153 Code: 89 f1 ba 01 00 00 00 31 f6 d3 e2 4c 89 ef e8 66 a4 01 00 e9 2c fe ff ff 0f 0b eb fe 0f 0b 66 66 2e 0f 1f 84 00 00 00 00 00 eb f3 <0f> 0b eb fe 0f 0b 0f 1f 84 00 00 00 00 00 eb f6 0f 0b eb fe 49 Signed-off-by: Russ Anderson <rja@sgi.com> Reported-by: George Beshers <gbeshers@sgi.com> Acked-by: Hedi Berriche <hedi@sgi.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23poweroff: change orderly_poweroff() to use schedule_work()Oleg Nesterov1-25/+32
David said: Commit 6c0c0d4d1080 ("poweroff: fix bug in orderly_poweroff()") apparently fixes one bug in orderly_poweroff(), but introduces another. The comments on orderly_poweroff() claim it can be called from any context - and indeed we call it from interrupt context in arch/powerpc/platforms/pseries/ras.c for example. But since that commit this is no longer safe, since call_usermodehelper_fns() is not safe in interrupt context without the UMH_NO_WAIT option. orderly_poweroff() can be used from any context but UMH_WAIT_EXEC is sleepable. Move the "force" logic into __orderly_poweroff() and change orderly_poweroff() to use the global poweroff_work which simply calls __orderly_poweroff(). While at it, remove the unneeded "int argc" and change argv_split() to use GFP_KERNEL. We use the global "bool poweroff_force" to pass the argument, this can obviously affect the previous request if it is pending/running. So we only allow the "false => true" transition assuming that the pending "true" should succeed anyway. If schedule_work() fails after that we know that work->func() was not called yet, it must see the new value. This means that orderly_poweroff() becomes async even if we do not run the command and always succeeds, schedule_work() can only fail if the work is already pending. We can export __orderly_poweroff() and change the non-atomic callers which want the old semantics. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: David Gibson <david@gibson.dropbear.id.au> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Feng Hong <hongfeng@marvell.com> Cc: Kees Cook <keescook@chromium.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit ↵Wanpeng Li1-2/+6
accouting hugetlb_total_pages is used for overcommit calculations but the current implementation considers only the default hugetlb page size (which is either the first defined hugepage size or the one specified by default_hugepagesz kernel boot parameter). If the system is configured for more than one hugepage size, which is possible since commit a137e1cc6d6e ("hugetlbfs: per mount huge page sizes") then the overcommit estimation done by __vm_enough_memory() (resp. shown by meminfo_proc_show) is not precise - there is an impression of more available/allowed memory. This can lead to an unexpected ENOMEM/EFAULT resp. SIGSEGV when memory is accounted. Testcase: boot: hugepagesz=1G hugepages=1 the default overcommit ratio is 50 before patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 55434168 kB after patch: egrep 'CommitLimit' /proc/meminfo CommitLimit: 54909880 kB [akpm@linux-foundation.org: coding-style tweak] Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Hillf Danton <dhillf@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: <stable@vger.kernel.org> [3.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23printk: Provide a wake_up_klogd() off-caseFrederic Weisbecker4-44/+46
wake_up_klogd() is useless when CONFIG_PRINTK=n because neither printk() nor printk_sched() are in use and there are actually no waiter on log_wait waitqueue. It should be a stub in this case for users like bust_spinlocks(). Otherwise this results in this warning when CONFIG_PRINTK=n and CONFIG_IRQ_WORK=n: kernel/built-in.o In function `wake_up_klogd': (.text.wake_up_klogd+0xb4): undefined reference to `irq_work_queue' To fix this, provide an off-case for wake_up_klogd() when CONFIG_PRINTK=n. There is much more from console_unlock() and other console related code in printk.c that should be moved under CONFIG_PRINTK. But for now, focus on a minimal fix as we passed the merged window already. [akpm@linux-foundation.org: include printk.h in bust_spinlocks.c] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Reported-by: James Hogan <james.hogan@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-23irq_work.h: fix warning when CONFIG_IRQ_WORK=nJames Hogan1-1/+1
A randconfig caught repeated compiler warnings when CONFIG_IRQ_WORK=n due to the definition of a non-inline static function in <linux/irq_work.h>: include/linux/irq_work.h +40 : warning: 'irq_work_needs_cpu' defined but not used Make it inline to supress the warning. This is caused commit 00b42959106a ("irq_work: Don't stop the tick with pending works") merged in v3.9-rc1. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-23 00:52:12 +0300