| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A just-created bfq_queue, say Q, may happen to be merged with another
bfq_queue on the very first invocation of the function
__bfq_insert_request. In such a case, even if Q would clearly deserve
interactive weight raising (as it has just been created), the function
bfq_add_request does not make it to be invoked for Q, and thus to
activate weight raising for Q. As a consequence, when the state of Q
is saved for a possible future restore, after a split of Q from the
other bfq_queue(s), such a state happens to be (unjustly)
non-weight-raised. Then the bfq_queue will not enjoy any weight
raising on the split, even if should still be in an interactive
weight-raising period when the split occurs.
This commit solves this problem as follows, for a just-created
bfq_queue that is being early-merged: it stores directly, in the saved
state of the bfq_queue, the weight-raising state that would have been
assigned to the bfq_queue if not early-merged.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Mirko Montanari <mirkomontanari91@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As already explained in the message of commit "block, bfq: fix
wrong init of saved start time for weight raising", if a soft
real-time weight-raising period happens to be nested in a larger
interactive weight-raising period, then BFQ restores the interactive
weight raising at the end of the soft real-time weight raising. In
particular, BFQ checks whether the latter has ended only on request
dispatches.
Unfortunately, the above scheme fails to restore interactive weight
raising in the following corner case: if a bfq_queue, say Q,
1) Is merged with another bfq_queue while it is in a nested soft
real-time weight-raising period. The weight-raising state of Q is
then saved, and not considered any longer until a split occurs.
2) Is split from the other bfq_queue(s) at a time instant when its
soft real-time weight raising is already finished.
On the split, while resuming the previous, soft real-time
weight-raised state of the bfq_queue Q, BFQ checks whether the
current soft real-time weight-raising period is actually over. If so,
BFQ switches weight raising off for Q, *without* checking whether the
soft real-time period was actually nested in a non-yet-finished
interactive weight-raising period.
This commit addresses this issue by adding the above missing check in
bfq_queue splits, and restoring interactive weight raising if needed.
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Tested-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Mirko Montanari <mirkomontanari91@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This commit fixes a bug that causes bfq to fail to guarantee a high
responsiveness on some drives, if there is heavy random read+write I/O
in the background. More precisely, such a failure allowed this bug to
be found [1], but the bug may well cause other yet unreported
anomalies.
BFQ raises the weight of the bfq_queues associated with soft real-time
applications, to privilege the I/O, and thus reduce latency, for these
applications. This mechanism is named soft-real-time weight raising in
BFQ. A soft real-time period may happen to be nested into an
interactive weight raising period, i.e., it may happen that, when a
bfq_queue switches to a soft real-time weight-raised state, the
bfq_queue is already being weight-raised because deemed interactive
too. In this case, BFQ saves in a special variable
wr_start_at_switch_to_srt, the time instant when the interactive
weight-raising period started for the bfq_queue, i.e., the time
instant when BFQ started to deem the bfq_queue interactive. This value
is then used to check whether the interactive weight-raising period
would still be in progress when the soft real-time weight-raising
period ends. If so, interactive weight raising is restored for the
bfq_queue. This restore is useful, in particular, because it prevents
bfq_queues from losing their interactive weight raising prematurely,
as a consequence of spurious, short-lived soft real-time
weight-raising periods caused by wrong detections as soft real-time.
If, instead, a bfq_queue switches to soft-real-time weight raising
while it *is not* already in an interactive weight-raising period,
then the variable wr_start_at_switch_to_srt has no meaning during the
following soft real-time weight-raising period. Unfortunately the
handling of this case is wrong in BFQ: not only the variable is not
flagged somehow as meaningless, but it is also set to the time when
the switch to soft real-time weight-raising occurs. This may cause an
interactive weight-raising period to be considered mistakenly as still
in progress, and thus a spurious interactive weight-raising period to
start for the bfq_queue, at the end of the soft-real-time
weight-raising period. In particular the spurious interactive
weight-raising period will be considered as still in progress, if the
soft-real-time weight-raising period does not last very long. The
bfq_queue will then be wrongly privileged and, if I/O bound, will
unjustly steal bandwidth to truly interactive or soft real-time
bfq_queues, harming responsiveness and low latency.
This commit fixes this issue by just setting wr_start_at_switch_to_srt
to minus infinity (farthest past time instant according to jiffies
macros): when the soft-real-time weight-raising period ends, certainly
no interactive weight-raising period will be considered as still in
progress.
[1] Background I/O Type: Random - Background I/O mix: Reads and writes
- Application to start: LibreOffice Writer in
http://www.phoronix.com/scan.php?page=news_item&px=Linux-4.13-IO-Laptop
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Mirko Montanari <mirkomontanari91@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When someone calls wakeup_flusher_threads() or
wakeup_flusher_threads_bdi(), they schedule writeback of all dirty
pages in the system (or on that bdi). If we are tight on memory, we
can get tons of these queued from kswapd/vmscan. This causes (at
least) two problems:
1) We consume a ton of memory just allocating writeback work items.
We've seen as much as 600 million of these writeback work items
pending. That's a lot of memory to pointlessly hold hostage,
while the box is under memory pressure.
2) We spend so much time processing these work items, that we
introduce a softlockup in writeback processing. This is because
each of the writeback work items don't end up doing any work (it's
hard when you have millions of identical ones coming in to the
flush machinery), so we just sit in a tight loop pulling work
items and deleting/freeing them.
Fix this by adding a 'start_all' bit to the writeback structure, and
set that when someone attempts to flush all dirty pages. The bit is
cleared when we start writeback on that work item. If the bit is
already set when we attempt to queue !nr_pages writeback, then we
simply ignore it.
This provides us one full flush in flight, with one pending as well,
and makes for more efficient handling of this type of writeback.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Now that we have no external callers of wb_start_writeback(), we
can shuffle the passing in of 'nr_pages'. Everybody passes in 0
at this point, so just kill the argument and move the dirty
count retrieval to that function.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't have any callers outside of fs-writeback.c anymore,
make it private.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Laptop mode really wants to writeback the number of dirty
pages and inodes. Instead of calculating this in the caller,
just pass in 0 and let wakeup_flusher_threads() handle it.
Use the new wakeup_flusher_threads_bdi() instead of rolling
our own.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chris Mason <clm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similar to wakeup_flusher_threads(), except that we only wake
up the flusher threads on the specified backing device.
No functional changes in this patch.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chris Mason <clm@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
All the callers pass in 'true' for range_cyclic, so kill the
argument.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're writing back the full range of dirty pages on the devices,
there's no point in making this special and not do normal range
cyclic writeback.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Everybody is passing in 0 now, let's get rid of the argument.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since the previous commit removed any case where grow_buffers()
would return failure due to memory allocations, we can safely
remove the case where we have to call free_more_memory() in
this function.
Since this is also the last user of free_more_memory(), kill
it off completely.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We currently use it for find_or_create_page(), which means that it
cannot fail. Ensure we also pass in 'retry == true' to
alloc_page_buffers(), which also ensure that it cannot fail.
After this, there are no failure cases in grow_dev_page() that
occur because of a failed memory allocation.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of adding weird retry logic in that function, utilize
__GFP_NOFAIL to ensure that the vm takes care of handling any
potential retries appropriately. This means we don't have to
call free_more_memory() from here.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For some reason, the laptop mode IO completion notified was never wired
up for blk-mq. Ensure that we trigger the callback appropriately, to arm
the laptop mode flush timer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We don't have any notion of a tagging cache anymore, and haven't
for a long time. Kill off the unused enums.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
since 9bddeb2a5b981 "blk-mq: make per-sw-queue bio merge as default .bio_merge"
there is no caller for this function.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
add an option that disable io scheduler for null block device.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The code is only for blkcg not for all cgroups
Fixes: d4478e92d618 ("block/loop: make loop cgroup aware")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch fix the following build warning:
drivers/block/cryptoloop.c:46:8: warning: variable 'cipher' set but not used [-Wunused-but-set-variable]
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
loop block device handles IO in a separate thread. The actual IO
dispatched isn't cloned from the IO loop device received, so the
dispatched IO loses the cgroup context.
I'm ignoring buffer IO case now, which is quite complicated. Making the
loop thread aware cgroup context doesn't really help. The loop device
only writes to a single file. In current writeback cgroup
implementation, the file can only belong to one cgroup.
For direct IO case, we could workaround the issue in theory. For
example, say we assign cgroup1 5M/s BW for loop device and cgroup2
10M/s. We can create a special cgroup for loop thread and assign at
least 15M/s for the underlayer disk. In this way, we correctly throttle
the two cgroups. But this is tricky to setup.
This patch tries to address the issue. We record bio's css in loop
command. When loop thread is handling the command, we then use the API
provided in patch 1 to set the css for current task. The bio layer will
use the css for new IO (from patch 3).
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_blkcg is the only API to get cgroup info for a bio right now. If
bio_blkcg finds current task is a kthread and has original blkcg
associated, it will use the css instead of associating the bio to
current task. This makes it possible that kthread dispatches bios on
behalf of other threads.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Nobody uses the APIs right now.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
kthread usually runs jobs on behalf of other threads. The jobs should be
charged to cgroup of original threads. But the jobs run in a kthread,
where we lose the cgroup context of original threads. The patch adds a
machanism to record cgroup info of original threads in kthread context.
Later we can retrieve the cgroup info and attach the cgroup info to jobs.
Since this mechanism is only required by kthread, we store the cgroup
info in kthread data instead of generic task_struct.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull compat fix from Al Viro:
"I really wish gcc warned about conversions from pointer to function
into void *..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix a typo in put_compat_shm_info()
|
|
"uip" misspelled as "up"; unfortunately, the latter happens to be
a function and gcc is happy to convert it to void *...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull block fixes from Jens Axboe:
- Two sets of NVMe pull requests from Christoph:
- Fixes for the Fibre Channel host/target to fix spec compliance
- Allow a zero keep alive timeout
- Make the debug printk for broken SGLs work better
- Fix queue zeroing during initialization
- Set of RDMA and FC fixes
- Target div-by-zero fix
- bsg double-free fix.
- ndb unknown ioctl fix from Josef.
- Buffered vs O_DIRECT page cache inconsistency fix. Has been floating
around for a long time, well reviewed. From Lukas.
- brd overflow fix from Mikulas.
- Fix for a loop regression in this merge window, where using a union
for two members of the loop_cmd turned out to be a really bad idea.
From Omar.
- Fix for an iostat regression fix in this series, using the wrong API
to get at the block queue. From Shaohua.
- Fix for a potential blktrace delection deadlock. From Waiman.
* 'for-linus' of git://git.kernel.dk/linux-block: (30 commits)
nvme-fcloop: fix port deletes and callbacks
nvmet-fc: sync header templates with comments
nvmet-fc: ensure target queue id within range.
nvmet-fc: on port remove call put outside lock
nvme-rdma: don't fully stop the controller in error recovery
nvme-rdma: give up reconnect if state change fails
nvme-core: Use nvme_wq to queue async events and fw activation
nvme: fix sqhd reference when admin queue connect fails
block: fix a crash caused by wrong API
fs: Fix page cache inconsistency when mixing buffered and AIO DIO
nvmet: implement valid sqhd values in completions
nvme-fabrics: Allow 0 as KATO value
nvme: allow timed-out ios to retry
nvme: stop aer posting if controller state not live
nvme-pci: Print invalid SGL only once
nvme-pci: initialize queue memory before interrupts
nvmet-fc: fix failing max io queue connections
nvme-fc: use transport-specific sgl format
nvme: add transport SGL definitions
nvme.h: remove FC transport-specific error values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Bob Peterson:
"GFS2: Fix an old regression in GFS2's debugfs interface
This fixes a regression introduced by commit 88ffbf3e037e ("GFS2: Use
resizable hash table for glocks"). The regression caused the glock dump
in debugfs to not report all the glocks, which makes debugging
extremely difficult"
* tag 'gfs2-for-linus-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix debugfs glocks dump
|
|
Pull Microblaze fixes from Michal Simek:
- Kbuild fix
- use vma_pages
- setup default little endians
* tag 'microblaze-4.14-rc3' of git://git.monstr.eu/linux-2.6-microblaze:
arch: change default endian for microblaze
microblaze: Cocci spatch "vma_pages"
microblaze: Add missing kvm_para.h to Kbuild
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Stack tracing and RCU has been having issues with each other and
lockdep has been pointing out constant problems.
The changes have been going into the stack tracer, but it has been
discovered that the problem isn't with the stack tracer itself, but it
is with calling save_stack_trace() from within the internals of RCU.
The stack tracer is the one that can trigger the issue the easiest,
but examining the problem further, it could also happen from a WARN()
in the wrong place, or even if an NMI happened in this area and it did
an rcu_read_lock().
The critical area is where RCU is not watching. Which can happen while
going to and from idle, or bringing up or taking down a CPU.
The final fix was to put the protection in kernel_text_address() as it
is the one that requires RCU to be watching while doing the stack
trace.
To make this work properly, Paul had to allow rcu_irq_enter() happen
after rcu_nmi_enter(). This should have been done anyway, since an NMI
can page fault (reading vmalloc area), and a page fault triggers
rcu_irq_enter().
One patch is just a consolidation of code so that the fix only needed
to be done in one location"
* tag 'trace-v4.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove RCU work arounds from stack tracer
extable: Enable RCU if it is not watching in kernel_text_address()
extable: Consolidate *kernel_text_address() functions
rcu: Allow for page faults in NMI handlers
|
|
Now that there are potentially long delays between when a remoteport or
targetport delete calls is made and when the callback occurs (dev_loss_tmo
timeout), no longer block in the delete routines and move the final nport
puts to the callbacks.
Moved the fcloop_nport_get/put/free routines to avoid forward declarations.
Ensure port_info structs used in registrations are nulled in case fields
are not set (ex: devloss_tmo values).
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Comments were incorrect:
- defer_rcv was in host port template. moved to target port template
- Added Mandatory statements for target port template items
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When searching for queue id's ensure they are within the expected range.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Avoid calling the put routine, as it may traverse to free routines while
holding the target lock.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By calling nvme_stop_ctrl on a already failed controller will wait for the
scan work to complete (only by identify timeout expiration which is 60
seconds). This is unnecessary when we already know that the controller has
failed.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we failed to transition to state LIVE after a successful reconnect,
then controller deletion already started. In this case there is no
point moving forward with reconnect.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
async_event_work might race as it is executed from two different
workqueues at the moment.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix bug in sqhd patch.
It wasn't the sq that was at risk. In the case where the admin queue
connect command fails, the sq->size field is not set. Therefore, this
becomes a divide by zero error.
Add a quick check to bypass under this failure condition.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The switch to rhashtables (commit 88ffbf3e03) broke the debugfs glock
dump (/sys/kernel/debug/gfs2/<device>/glocks) for dumps bigger than a
single buffer: the right function for restarting an rhashtable iteration
from the beginning of the hash table is rhashtable_walk_enter;
rhashtable_walk_stop + rhashtable_walk_start will just resume from the
current position.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
|
|
part_stat_show takes a part device not a disk, so we should use
part_to_disk.
Fixes: d62e26b3ffd2("block: pass in queue to inflight accounting")
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently when mixing buffered reads and asynchronous direct writes it
is possible to end up with the situation where we have stale data in the
page cache while the new data is already written to disk. This is
permanent until the affected pages are flushed away. Despite the fact
that mixing buffered and direct IO is ill-advised it does pose a thread
for a data integrity, is unexpected and should be fixed.
Fix this by deferring completion of asynchronous direct writes to a
process context in the case that there are mapped pages to be found in
the inode. Later before the completion in dio_complete() invalidate
the pages in question. This ensures that after the completion the pages
in the written area are either unmapped, or populated with up-to-date
data. Also do the same for the iomap case which uses
iomap_dio_complete() instead.
This has a side effect of deferring the completion to a process context
for every AIO DIO that happens on inode that has pages mapped. However
since the consensus is that this is ill-advised practice the performance
implication should not be a problem.
This was based on proposal from Jeff Moyer, thanks!
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To support sqhd, for initiators that are following the spec and
paying attention to sqhd vs their sqtail values:
- add sqhd to struct nvmet_sq
- initialize sqhd to 0 in nvmet_sq_setup
- rather than propagate the 0's-based qsize value from the connect message
which requires a +1 in every sqhd update, and as nothing else references
it, convert to 1's-based value in nvmt_sq/cq_setup() calls.
- validate connect message sqsize being non-zero per spec.
- updated assign sqhd for every completion that goes back.
Also remove handling the NULL sq case in __nvmet_req_complete, as it can't
happen with the current code.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently, driver code allows user to set 0 as KATO
(Keep Alive TimeOut), but this is not being respected.
This patch enforces the expected behavior.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the nvme_req_needs_retry() applies several checks to see if
a retry is allowed. On of those is whether the current time has exceeded
the start time of the io plus the timeout length. This check, if an io
times out, means there is never a retry allowed for the io. Which means
applications see the io failure.
Remove this check and allow the io to timeout, like it does on other
protocols, and retries to be made.
On the FC transport, a frame can be lost for an individual io, and there
may be no other errors that escalate for the connection/association.
The io will timeout, which causes the transport to escalate into creating
a new association, but the io that timed out, due to this retry logic, has
already failed back to the application and things are hosed.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an nvme async_event command completes, in most cases, a new
async event is posted. However, if the controller enters a
resetting or reconnecting state, there is nothing to block the
scheduled work element from posting the async event again. Nor are
there calls from the transport to stop async events when an
association dies.
In the case of FC, where the association is torn down, the aer must
be aborted on the FC link and completes through the normal job
completion path. Thus the terminated async event ends up being
rescheduled even though the controller isn't in a valid state for
the aer, and the reposting gets the transport into a partially torn
down data structure.
It's possible to hit the scenario on rdma, although much less likely
due to an aer completing right as the association is terminated and
as the association teardown reclaims the blk requests via
nvme_cancel_request() so its immediate, not a link-related action
like on FC.
Fix by putting controller state checks in both the async event
completion routine where it schedules the async event and in the
async event work routine before it calls into the transport. It's
effectively a "stop_async_events()" behavior. The transport, when
it creates a new association with the subsystem will transition
the state back to live and is already restarting the async event
posting.
Signed-off-by: James Smart <james.smart@broadcom.com>
[hch: remove taking a lock over reading the controller state]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The WARN_ONCE macro returns true if the condition is true, not if the
warn was raised, so we're printing the scatter list every time it's
invalid. This is excessive and makes debugging harder, so this patch
prints it just once.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A spurious interrupt before the nvme driver has initialized the completion
queue may inadvertently cause the driver to believe it has a completion
to process. This may result in a NULL dereference since the nvmeq's tags
are not set at this point.
The patch initializes the host's CQ memory so that a spurious interrupt
isn't mistaken for a real completion.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
fc transport is treating NVMET_NR_QUEUES as maximum queue count, e.g.
admin queue plus NVMET_NR_QUEUES-1 io queues. But NVMET_NR_QUEUES is
the number of io queues, so maximum queue count is really
NVMET_NR_QUEUES+1.
Fix the handling in the target fc transport
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Sync with NVM Express spec change and FC-NVME 1.18.
FC transport sets SGL type to Transport SGL Data Block Descriptor and
subtype to transport-specific value 0x0A.
Removed the warn-on's on the PRP fields. They are unneeded. They were
to check for values from the upper layer that weren't set right, and
for the most part were fine. But, with Async events, which reuse the
same structure and 2nd time issued the SGL overlay converted them to
the Transport SGL values - the warn-on's were errantly firing.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add transport SGL defintions from NVMe TP 4008, required for
the final NVMe-FC standard.
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
