summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-10-31serial: omap: fix missing commaPhilippe Proulx1-1/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>, Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: sh-sci: Enable the driver on all ARM platformsLaurent Pinchart1-1/+1
Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: mfd: Staticize local symbolsJingoo Han1-4/+6
These local symbols are used only in this file. Fix the following sparse warnings: drivers/tty/serial/mfd.c:296:6: warning: symbol 'hsu_dma_tx' was not declared. Should it be static? drivers/tty/serial/mfd.c:343:6: warning: symbol 'hsu_dma_start_rx_chan' was not declared. Should it be static? drivers/tty/serial/mfd.c:389:6: warning: symbol 'hsu_dma_rx' was not declared. Should it be static? drivers/tty/serial/mfd.c:1186:17: warning: symbol 'serial_hsu_pops' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: omap: fix a few checkpatch warningsPhilippe Proulx1-9/+8
Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: omap: improve RS-485 performancePhilippe Proulx1-12/+38
If RS-485 is enabled, make the OMAP UART fire THR interrupts when both TX FIFO and TX shift register are empty instead of polling the equivalent status bit. This removes the burst of interrupt requests seen at every end of transmission. Also: the comment said that the TX FIFO trigger level was set at 16 characters when it's 32 in reality. Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30mrst_max3110: fix unbalanced IRQ issue during resumeChen, Jie1-18/+17
During resume, a startup will request_irq again, meantime resume function's enable_irq will cause unbalanced IRQ issue. Fix this issue by moving request_irq to probe function. Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Chen, Jie <jie.d.chen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: omap: Add support for optional wake-upTony Lindgren1-8/+46
With the recent pinctrl-single changes, omaps can treat wake-up events from deeper idle states as interrupts. There's a separate "io chain" controller on most omaps that stays enabled when the device hits off-idle and the regular interrupt controller is powered off. Let's add support for the optional second interrupt for wake-up events. And then serial-omap can manage the wake-up interrupt from it's runtime PM calls to avoid spurious interrupts during runtime. Note that the wake interrupt is board specific as it uses the UART RX pin, and for omap3, there are six pin options for UART3 RX pin. Also Note that the legacy platform based booting handles the wake-ups in the legacy mux driver and does not need to pass the wake-up interrupt to the driver. And finally, to pass the wake-up interrupt in the dts file, either interrupt-map or the pending interrupts-extended property needs to be passed. It's probably best to use interrupts-extended when it's available. Cc: Felipe Balbi <balbi@ti.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-30serial: sirf: remove duplicate definesMichael Opdenacker1-12/+0
This patch removes duplicate defines in drivers/tty/serial/sirfsoc_uart.h Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29tty: xuartps: Fix build error when COMMON_CLK is not setSoren Brinkmann1-0/+8
Clock notifiers are only available when CONFIG_COMMON_CLK is enabled. Hence all notifier related code has to be protected by corresponsing ifdefs. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29tty: xuartps: Fix build error due to missing forward declarationSoren Brinkmann1-14/+14
If CONFIG_PM_SLEEP is enabled and CONFIG_SERIAL_XILINX_PS_UART_CONSOLE is not, a forward declaration of the uart_driver struct is not included, leading to a build error due to an undeclared variable. Fixing this by moving the definition of the struct uart_driver before the definition of the suspend/resume callbacks. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-29tty: xuartps: Fix "may be used uninitialized" build warningSoren Brinkmann1-1/+1
Initialize varibles for which a 'may be used uninitalized' warning is issued. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20serial: 8250_pci: add Pericom PCIe Serial board Support (12d8:7952/4/8) - ↵Angelo Butti1-0/+48
Chip PI7C9X7952/4/8 Signed-off-by: Angelo Butti <buttiangelo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Update copyright informationSoren Brinkmann1-1/+1
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Implement suspend/resume callbacksSoren Brinkmann1-0/+114
Implement suspend and resume callbacks in order to support system suspend/hibernation. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Dynamically adjust to input frequency changesSoren Brinkmann1-4/+119
Add a clock notifier to dynamically handle frequency changes of the input clock by reprogramming the UART in order to keep the baud rate constant. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Updating set_baud_rate()Soren Brinkmann1-43/+93
The original algorithm to find the best baud rate dividers does not necessarily find the best set of dividers. And in the worst case may even write illegal values to the hardware. The new function should make better use of the hardware capabilities and be able to provide valid settings for a wider range of baud rates and also input clocks. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Force enable the UART in xuartps_console_writeLars-Peter Clausen1-1/+11
It is possible that under certain circumstances xuartps_console_write is entered while the UART disabled. When this happens the code will busy loop in xuartps_console_putchar, since the character is never written and the TXEMPTY flag is never set. The result is a system lockup. This patch force enables the UART for the duration of xuartps_console_write to avoid this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: support 64 byte FIFO sizeSuneel1-7/+23
Changes to use the 64 byte FIFO depth and fix the issue by clearing the txempty interrupt in isr status for tx after filling in data in start_tx function Signed-off-by: Suneel Garapati <suneelg@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Add polled mode support for xuartpsVlad Lungu1-0/+52
This allows KDB/KGDB to run. Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Implement BREAK detection, add SYSRQ supportVlad Lungu1-1/+49
The Cadence UART does not do break detection, even if the datasheet says it does. This patch adds break detection in software (tested in 8N1 mode only) and enables SYSRQ, allowing for Break-g to enter KDB and all the other goodies. Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Use devm_kzallocSoren Brinkmann1-9/+5
Use the device managed interface for memory allocation, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-20tty: xuartps: Use devm_clk_get()Soren Brinkmann1-10/+4
Use the device managed interface for clocks, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-18tty/serial: at91: add a fallback option to determine uart/usart propertyNicolas Ferre2-1/+19
On older SoC, the "name" field is not filled in the register map. Fix the way to figure out if the serial port is an uart or an usart for these older products (with corresponding properties). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-18tty/serial: at91: fix uart/usart selection for older productsNicolas Ferre1-7/+2
Since commit 055560b04a8cd063aea916fd083b7aec02c2adb8 (serial: at91: distinguish usart and uart) the older products which do not have a name field in their register map are unable to use their serial output. As the main console output is usually the serial interface (aka DBGU) it is pretty unfortunate. So, instead of failing during probe() we just silently configure the serial peripheral as an uart. It allows us to use these serial outputs. The proper solution is proposed in another patch. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-18serial: 8250_pci: add support for Fintek 4, 8, and 12 port cardsGreg Kroah-Hartman1-0/+112
This adds support for Fintek's 4, 8, and 12 port PCIE serial cards. Thanks to Fintek for the sample devices, and the spec needed in order to implement this. Cc: Amanda Ying <amanda_ying@fintek.com.tw> Cc: Felix Shih <felix_shih@fintek.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: imx: optimization: remove the workqueues for DMAHuang Shijie1-44/+10
I worried that the delay of the sdma_run_channel0() maybe too long for interrupt context, so I added the workqueues for RX/TX DMA. But tested with bluetooth device, I find that the delay of sdma_run_channel0() is about 8us (tested in imx6dl sabreauto board). I think the delay is acceptable. This patch removes the RX/TX workqueues for DMA, it makes the code more clear. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: imx: use the dmaengine_tx_statusHuang Shijie1-2/+2
Use the dmaengine_tx_status to simplify the code, do not change any logic. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: imx: fix the wrong number of scatterlist entries when xmit->head is 0Huang Shijie1-1/+1
When the (xmit->tail > xmit->head) is true and the xmit->head is 0, we only need one DMA scatterlist in actually. Current code uses two DMA scatterlists in this case, this is obviously wrong. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: imx: check the DMA for imx_tx_emptyHuang Shijie1-1/+8
Assume the following situation: If the DMA is enabled, and the a TX DMA operation is working, But we have not issued the TX DMA operation (or we have issued the TX DMA operation with dma_async_issue_pending(), but the DMA has not started to move the data from the memory to the TXFIFO). At this time, we may get the wrong status of the transmitter when we call the imx_tx_empty. In such situation, only check the USR2_TXDC does not enough for us. This patch checks the DMA's situation, and return 0 when the TX DMA is working. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: imx: implement the flush_buffer hookHuang Shijie1-0/+11
The current driver does not implement the flush_buffer hook for uart_ops. When we enable the DMA for the driver, and test it with Bluetooth, we may meet the following bug for TX: [1] User application may call the flush operation at any time. The uart_flush_buffer() calls the uart_circ_clear() to set the xmit->head and xmit->tail with 0. [2] The TX DMA callback can be called at any time too. The dma_tx_call() will update the xmit->tail. If [2] occurs just after the [1], we will get the wrong xmit->tail. This patch implements the flush_buffer hook to fix this issue. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: core: delete .set_wake() callbackLinus Walleij2-5/+0
This deletes the .set_wake() callback in the struct uart_ops. Apparently this has been unused since pre-git times. In the old-2.6-bkcvs it is deleted as part of a changeset removing the PM_SET_WAKEUP from pm_request_t which is since also deleted from the kernel. The apropriate way to set wakeups in the kernel is to have a code snippet like this in .suspend() or .runtime_suspend() callbacks: static int foo_suspend(struct device *dev) { if (device_may_wakeup(dev)) { /* Enable wakeups, set internal states */ } } This specific callback is not coming back. Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: pch_uart: remove reference to .set_wake()Linus Walleij1-1/+0
This callback is gone and not coming back, so will not be supported later. Cc: Johan Hovold <jhovold@gmail.com> Acked-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: mpc52xx: remove reference to .set_wake()Linus Walleij1-1/+0
This callback is gone and not coming back, so will not be supported later. Cc: Gerhard Sittig <gsi@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: sa1100: delete .set_wake callbackLinus Walleij1-1/+4
This callback is unused by the serial core since pre-git days and is not coming back. Delete it. Enabling wakeup on the SA1100 platforms should be done in the suspend() callback so the platform hook is left in the serial port struct for later enablement. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: omap: delete .set_wake callbackLinus Walleij1-10/+0
This callback is unused by the serial core since pre-git days and is not coming back. Delete it. Enabling wakeup on the OMAP serial driver is done through other runpaths these days. Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17tty: incorrect test of echo_buf() result for ECHO_OP_STARTRoel Kluin1-1/+1
test echo_buf() result for ECHO_OP_START Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17tty: Remove unnecessary semicolonsJoe Perches9-14/+14
These aren't necessary after switch and while blocks. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: mrst_max3110: Fix race condition between spi transfersBin Gao1-0/+4
There is a race between termios configuration and xmit that can cause the intel_mid_ssp_spi driver to stall. Serializing spi transactions fixes the problem. Signed-off-by: Bin Gao <bin.gao@intel.com> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial: mrst_max3110: Check the irq number before enable/disabe irq in PM hooksFeng Tang1-2/+4
We should check the validity of the irq number before calling disable_irq() and enable_irq() in the suspend/resume function, as "max->irq == 0" means the irq is not enabled for max3110 device, otherwise it will hurt device whose irq number is really 0. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17serial8250-em: convert to clk_prepare/unprepareShinya Kuribayashi1-3/+3
Add calls to clk_prepare and unprepare so that EMMA Mobile EV2 can migrate to the common clock framework. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> [takashi.yoshii.ze@renesas.com: edited for conflicts] Signed-off-by: Takashi Yoshii <takashi.yoshii.zj@renesas.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17sysrq: Allow magic SysRq key functions to be disabled through KconfigBen Hutchings5-12/+17
Turn the initial value of sysctl kernel.sysrq (SYSRQ_DEFAULT_ENABLE) into a Kconfig variable. Original version by Bastian Blank <waldi@debian.org>. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-17sysrq: Document hexadecimal values for kernel.sysrq bitmaskBen Hutchings1-8/+11
It makes more sense to enter a bitmask in hexadecimal rather than decimal. Sadly we can't make it read back as hexadecimal. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07serial: bfin_uart: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07serial: tegra: remove deprecated IRQF_DISABLEDMichael Opdenacker1-1/+1
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07Merge 3.12-rc4 into tty-nextGreg Kroah-Hartman316-1750/+2821
We want the tty fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-07Linux 3.12-rc4v3.12-rc4Linus Torvalds1-1/+1
2013-10-07net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman1-2/+2
Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: stable@vger.kernel.org Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reported-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds8-25/+67
Pull SCSI target fixes from Nicholas Bellinger: "Here are the outstanding target fixes queued up for v3.12-rc4 code. The highlights include: - Make vhost/scsi tag percpu_ida_alloc() use GFP_ATOMIC - Allow sess_cmd_map allocation failure fallback to use vzalloc - Fix COMPARE_AND_WRITE se_cmd->data_length bug with FILEIO backends - Fixes for COMPARE_AND_WRITE callback recursive failure OOPs + non zero scsi_status bug - Make iscsi-target do acknowledgement tag release from RX context - Setup iscsi-target with extra (cmdsn_depth / 2) percpu_ida tags Also included is a iscsi-target patch CC'ed for v3.10+ that avoids legacy wait_for_task=true release during fast-past StatSN acknowledgement, and two other SRP target related patches that address long-standing issues that are CC'ed for v3.3+. Extra thanks to Thomas Glanzmann for his testing feedback with COMPARE_AND_WRITE + EXTENDED_COPY VAAI logic" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target; Allow an extra tag_num / 2 number of percpu_ida tags iscsi-target: Perform release of acknowledged tags from RX context iscsi-target: Only perform wait_for_tasks when performing shutdown target: Fail on non zero scsi_status in compare_and_write_callback target: Fix recursive COMPARE_AND_WRITE callback failure target: Reset data_length for COMPARE_AND_WRITE to NoLB * block_size ib_srpt: always set response for task management target: Fall back to vzalloc upon ->sess_cmd_map kzalloc failure vhost/scsi: Use GFP_ATOMIC with percpu_ida_alloc for obtaining tag ib_srpt: Destroy cm_id before destroying QP. target: Fix xop->dbl assignment in target_xcopy_parse_segdesc_02
2013-10-07Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-17/+17
Pull slave-dmaengine fixes from Vinod Koul: "Here is the slave dmanegine fixes. We have the fix for deadlock issue on imx-dma by Michael and Josh's edma config fix along with author change" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-dma: fix callback path in tasklet dmaengine: imx-dma: fix lockdep issue between irqhandler and tasklet dmaengine: imx-dma: fix slow path issue in prep_dma_cyclic dma/Kconfig: Make TI_EDMA select TI_PRIV_EDMA edma: Update author email address
2013-10-06serial: mxs-auart: set the FIFO size to DMA buffer sizeHector Palacios1-1/+8
When DMA is enabled (with hardware flow control enabled) the FIFO size must be set to the size of the DMA buffer, as this is the size the tty subsystem can use. Signed-off-by: Hector Palacios <hector.palacios@digi.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-15 02:09:02 +0300