summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-08-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A couple of EFI fixes, plus misc fixes all around the map" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/arm64: Store Runtime Services revision firmware: Do not use WARN_ON(!spin_is_locked()) x86_32, entry: Clean up sysenter_badsys declaration x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly x86/mm: Fix RCU splat from new TLB tracepoints
2014-08-25Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-2/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A kprobes and a perf compat ioctl fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Handle compat ioctl kprobes: Skip kretprobe hit in NMI context to avoid deadlock
2014-08-25Merge tag 'fixes-for-linus' of ↵Linus Torvalds17-30/+76
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from this week, it's been pretty quiet and nothing really stands out as particularly noteworthy here -- mostly minor fixes across the field: - ODROID booting was fixed due to PMIC interrupts missing in DT - a collection of i.MX fixes - minor Tegra fix for regulators - Rockchip fix and addition of SoC-specific mailing list to make it easier to find posted patches" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Fix warning message ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings ARM: dts: ODROID i2c improvements ARM: dts: Enable PMIC interrupts on ODROID ARM: dts: imx6sx: fix the pad setting for uart CTS_B ARM: dts: i.MX53: fix apparent bug in VPU clks ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting ARM: dts: imx6: edmqmx6: change enet reset pin ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions. ARM: imx: remove unnecessary ARCH_HAS_OPP select ARM: imx: fix TLB missing of IOMUXC base address during suspend ARM: imx6: fix SMP compilation again ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
2014-08-25Merge tag 'gpio-v3.17-2' of ↵Linus Torvalds6-15/+51
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: - a largeish fix for the IRQ handling in the new Zynq driver. The quite verbose commit message gives the exact details. - move some defines for gpiod flags outside an ifdef to make stub functions work again. - various minor fixes that we can accept for -rc1. * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lynxpoint: enable input sensing in resume gpio: move GPIOD flags outside #ifdef gpio: delete unneeded test before of_node_put gpio: zynq: Fix IRQ handlers gpiolib: devres: use correct structure type name in sizeof MAINTAINERS: Change maintainer for gpio-bcm-kona.c
2014-08-25Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds44-167/+328
Pull drm fixes from Dave Airlie: "Intel and radeon fixes. Post KS/LC git requests from i915 and radeon stacked up. They are all fixes along with some new pci ids for radeon, and one maintainers file entry. - i915: display fixes and irq fixes - radeon: pci ids, and misc gpuvm, dpm and hdp cache" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits) MAINTAINERS: Add entry for Renesas DRM drivers drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe" drm/radeon: fix active_cu mask on SI and CIK after re-init (v3) drm/radeon: fix active cu count for SI and CIK drm/radeon: re-enable selective GPUVM flushing drm/radeon: Sync ME and PFP after CP semaphore waits v4 drm/radeon: fix display handling in radeon_gpu_reset drm/radeon: fix pm handling in radeon_gpu_reset drm/radeon: Only flush HDP cache for indirect buffers from userspace drm/radeon: properly document reloc priority mask drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true ...
2014-08-25aio: fix reqs_available handlingBenjamin LaHaise1-4/+73
As reported by Dan Aloni, commit f8567a3845ac ("aio: fix aio request leak when events are reaped by userspace") introduces a regression when user code attempts to perform io_submit() with more events than are available in the ring buffer. Reverting that commit would reintroduce a regression when user space event reaping is used. Fixing this bug is a bit more involved than the previous attempts to fix this regression. Since we do not have a single point at which we can count events as being reaped by user space and io_getevents(), we have to track event completion by looking at the number of events left in the event ring. So long as there are as many events in the ring buffer as there have been completion events generate, we cannot call put_reqs_available(). The code to check for this is now placed in refill_reqs_available(). A test program from Dan and modified by me for verifying this bug is available at http://www.kvack.org/~bcrl/20140824-aio_bug.c . Reported-by: Dan Aloni <dan@kernelim.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> Acked-by: Dan Aloni <dan@kernelim.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: stable@vger.kernel.org # v3.16 and anything that f8567a3845ac was backported to Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-24bus: arm-ccn: Fix warning messagePawel Moll1-1/+1
A message warning a user about wrong vc value was printing out port instead. Reported-by: Drew Richardson <drew.richardson@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24ARM: shmobile: koelsch: Remove non-existent i2c6 pinmuxGeert Uytterhoeven1-7/+0
On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts refers to non-existent pinmux configuration data: pinmux core: sh-pfc does not support function i2c6 sh-pfc e6060000.pfc: invalid function i2c6 in map table Remove it to fix this. Fixes: commit 1d41f36a68c0f4e9b01d563ce33bab5201858b54 ("ARM: shmobile: koelsch dts: Add VDD MPU regulator for DVFS") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24ARM: tegra: apalis/colibri t30: fix on-module 5v0 suppliesMarcel Ziswiler2-2/+20
Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised that the current device tree source includes for our modules only happen to work due to referencing the on-carrier 5v0 supply from USB which is not at all available on-module. The modules actually contain TPS60150 charge pumps to generate the PMIC required 5 volts from the one and only 3.3 volt module supply. This patch fixes this. (Note: When back-porting this to v3.16 stable releases, simply drop the change to tegra30-apalis.dtsi; that file was added in v3.17) Cc: <stable@vger.kernel.org> #v3.16+ Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24Merge tag 'v3.17-rockchip-fixes1' of ↵Olof Johansson3-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner: Pinctrl that got accidentially dropped when reorganizing the dts files and addition of the new Rockchip list to MAINTAINERS. * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: MAINTAINERS: add new Rockchip SoC list ARM: dts: rockchip: readd missing mmc0 pinctrl settings Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-24MAINTAINERS: Add entry for Renesas DRM driversLaurent Pinchart1-0/+11
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2014-08-24Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2-0/+8
into drm-next This pull just contains some new pci ids. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add additional SI pci ids drm/radeon: add new bonaire pci ids drm/radeon: add new KV pci id
2014-08-23MAINTAINERS: add new Rockchip SoC listHeiko Stuebner1-0/+1
Add the new list that Rockchip-specific patches should also be directed to. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-08-23ARM: dts: rockchip: readd missing mmc0 pinctrl settingsHeiko Stuebner2-0/+4
During the restructuring of the Rockchip Cortex-A9 dtsi files it seems like the pinctrl settings vanished at some point from the mmc0 support. This of course renders them unusable, so readd the necessary pinctrl properties. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-08-23Merge tag 'sunxi-dt-for-3.17-2' of ↵Olof Johansson1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner DT changes, take 2" from Maxime Ripard: Only a single patch in here that fixes a DTC warning. * tag 'sunxi-dt-for-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-23Merge tag 'pwm/for-3.17-rc2' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm fix from Thierry Reding: "Just one bugfix for the PWM lookup table code that would cause a PWM channel to be set to the wrong period and polarity for non-perfect matches" * tag 'pwm/for-3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: Fix period and polarity in pwm_get() for non-perfect matches
2014-08-23mac80211: fix channel switch for chanctx-based driversMichal Kazior1-1/+1
The new_ctx pointer is set only for non-chanctx drivers. This yielded a crash for chanctx-based drivers during channel switch finalization: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: ieee80211_vif_use_reserved_switch+0x71c/0xb00 [mac80211] Use an adequate chanctx pointer to fix this. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds38-261/+413
Pull networking fixes from David Miller: "Here are some bug fixes that have piled up during ksummit/linuxcon. 1) Fix endian problems in ibmveth, from Anton Blanchard. 2) IPV6 routing code does GFP_KERNEL allocation in atomic, fix from Benjamin Block. 3) SCTP association fixes from Daniel Borkmann. 4) When multiple VLAN headers are present we have to make sure the second and subsequent ones are pullable in the SKB otherwise we blindly dereference garbage. From Jiri Benc. 5) The argument adjustment of the signature of hlist_add_after*() introduced a regression in the batman-adv code, fix from Sven Eckelmann. 6) Fix TX hang handling to avoid a panic in i40e, from Anjali Singhai Jain. 7) PTP flag test is inverted in i40e driver, from Jesse Brandeburg. 8) ATM LEC driver needs to hold RTNL mutex over MTU changes, from Chas Williams. 9) Truncate packets larger then the TPACKET_V3 format configured buffers, otherwise we overwrite past the end of said buffers. From Eric Dumazet. 10) Fix endianness bugs in qlcnic firmware handling, from Rajesh Borundia and Shahed Shaikh. 11) CXGB4 sometimes doesn't get all of the TX completion events it should resulting in SKBs getting stuck in the TX queue, from Hariprasad Shenai. 12) When the FEC chip's PTP clock is disabled, you can't access the register. Add necessary checks to avoid the resulting hang, from Fugang Duan" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndef net: sctp: fix suboptimal edge-case on non-active active/retrans path selection net: sctp: spare unnecessary comparison in sctp_trans_elect_best net: ethernet: broadcom: bnx2x: Remove redundant #ifdef ibmveth: Fix endian issues with rx_no_buffer statistic net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings() openvswitch: fix panic with multiple vlan headers net: ipv6: fib: don't sleep inside atomic lock net: fec: ptp: avoid register access when ipg clock is disabled cxgb4: Free completed tx skbs promptly cxgb4: Fix race condition in cleanup sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probe bnx2x: Revert UNDI flushing mechanism qlcnic: Fix endianess issue in firmware load from file operation qlcnic: Fix endianess issue in FW dump template header qlcnic: Fix flash access interface to application MAINTAINERS: Add section for MRF24J40 IEEE 802.15.4 radio driver macvlan: Allow setting multicast filter on all macvlan types packet: handle too big packets for PACKET_V3 MAINTAINERS: add entry for ec_bhf driver ...
2014-08-22drivers: isdn: eicon: xdi_msg.h: Fix typo in #ifndefRasmus Villemoes1-1/+1
Test for definedness of the macro which is actually defined (the change is hard to see: it is s/SSS/SSA/). Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: sctp: fix suboptimal edge-case on non-active active/retrans path selectionDaniel Borkmann1-6/+3
In SCTP, selection of active (T.ACT) and retransmission (T.RET) transports is being done whenever transport control operations (UP, DOWN, PF, ...) are engaged through sctp_assoc_control_transport(). Commits 4c47af4d5eb2 ("net: sctp: rework multihoming retransmission path selection to rfc4960") and a7288c4dd509 ("net: sctp: improve sctp_select_active_and_retran_path selection") have both improved it towards a more fine-grained and optimal path selection. Currently, the selection algorithm for T.ACT and T.RET is as follows: 1) Elect the two most recently used ACTIVE transports T1, T2 for T.ACT, T.RET, where T.ACT<-T1 and T1 is most recently used 2) In case primary path T.PRI not in {T1, T2} but ACTIVE, set T.ACT<-T.PRI and T.RET<-T1 3) If only T1 is ACTIVE from the set, set T.ACT<-T1 and T.RET<-T1 4) If none is ACTIVE, set T.ACT<-best(T.PRI, T.RET, T3) where T3 is the most recently used (if avail) in PF, set T.RET<-T.PRI Prior to above commits, 4) was simply a camp on T.ACT<-T.PRI and T.RET<-T.PRI, ignoring possible paths in PF. Camping on T.PRI is still slightly suboptimal as it can lead to the following scenario: Setup: <A> <B> T1: p1p1 (10.0.10.10) <==> .'`) <==> p1p1 (10.0.10.12) <= T.PRI T2: p1p2 (10.0.10.20) <==> (_ . ) <==> p1p2 (10.0.10.22) net.sctp.rto_min = 1000 net.sctp.path_max_retrans = 2 net.sctp.pf_retrans = 0 net.sctp.hb_interval = 1000 T.PRI is permanently down, T2 is put briefly into PF state (e.g. due to link flapping). Here, the first time transmission is sent over PF path T2 as it's the only non-INACTIVE path, but the retransmitted data-chunks are sent over the INACTIVE path T1 (T.PRI), which is not good. After the patch, it's choosing better transports in both cases by modifying step 4): 4) If none is ACTIVE, set T.ACT_new<-best(T.ACT_old, T3) where T3 is the most recently used (if avail) in PF, set T.RET<-T.ACT_new This will still select a best possible path in PF if available (which can also include T.PRI/T.RET), and set both T.ACT/T.RET to it. In case sctp_assoc_control_transport() *just* put T.ACT_old into INACTIVE as it transitioned from ACTIVE->PF->INACTIVE and stays in INACTIVE just for a very short while before going back ACTIVE, it will guarantee that this path will be reselected for T.ACT/T.RET since T3 (PF) is not available. Previously, this was not possible, as we would only select between T.PRI and T.RET, and a possible T3 would be NULL due to the fact that we have just transitioned T3 in sctp_assoc_control_transport() from PF->INACTIVE and would select a suboptimal path when T.PRI/T.RET have worse properties. In the case that T.ACT_old permanently went to INACTIVE during this transition and there's no PF path available, plus T.PRI and T.RET are INACTIVE as well, we would now camp on T.ACT_old, but if everything is being INACTIVE there's really not much we can do except hoping for a successful HB to bring one of the transports back up again and, thus cause a new selection through sctp_assoc_control_transport(). Now both tests work fine: Case 1: 1. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET 2. T1 S(ACTIVE) T.ACT, T.RET T2 S(PF) 3. T1 S(ACTIVE) T.ACT, T.RET T2 S(INACTIVE) 5. T1 S(PF) T.ACT, T.RET T2 S(INACTIVE) [ 5.1 T1 S(INACTIVE) T.ACT, T.RET T2 S(INACTIVE) ] 6. T1 S(ACTIVE) T.ACT, T.RET T2 S(INACTIVE) 7. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET Case 2: 1. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET 2. T1 S(PF) T2 S(ACTIVE) T.ACT, T.RET 3. T1 S(INACTIVE) T2 S(ACTIVE) T.ACT, T.RET 5. T1 S(INACTIVE) T2 S(PF) T.ACT, T.RET [ 5.1 T1 S(INACTIVE) T2 S(INACTIVE) T.ACT, T.RET ] 6. T1 S(INACTIVE) T2 S(ACTIVE) T.ACT, T.RET 7. T1 S(ACTIVE) T.ACT T2 S(ACTIVE) T.RET Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: sctp: spare unnecessary comparison in sctp_trans_elect_bestDaniel Borkmann1-1/+1
When both transports are the same, we don't have to go down that road only to realize that we will return the very same transport. We are guaranteed that curr is always non-NULL. Therefore, just short-circuit this special case. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: ethernet: broadcom: bnx2x: Remove redundant #ifdefRasmus Villemoes1-4/+0
Nothing defines _ASM_GENERIC_INT_L64_H, it is a weird way to check for 64 bit longs, and u64 should be printed using %llx anyway. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22ibmveth: Fix endian issues with rx_no_buffer statisticAnton Blanchard1-4/+14
Hidden away in the last 8 bytes of the buffer_list page is a solitary statistic. It needs to be byte swapped or else ethtool -S will produce numbers that terrify the user. Since we do this in multiple places, create a helper function with a comment explaining what is going on. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: xgene: fix possible NULL dereference in xgene_enet_free_desc_rings()Iyappan Subramanian1-7/+13
A NULL pointer dereference is possible for the argument ring->buf_pool which is passed to xgene_enet_free_desc_ring(), as ring could be NULL. And now since NULL pointers are being checked for before the calls to xgene_enet_free_desc_ring(), might as well take advantage of them and not call the function if the argument would be NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22openvswitch: fix panic with multiple vlan headersJiri Benc1-0/+5
When there are multiple vlan headers present in a received frame, the first one is put into vlan_tci and protocol is set to ETH_P_8021Q. Anything in the skb beyond the VLAN TPID may be still non-linear, including the inner TCI and ethertype. While ovs_flow_extract takes care of IP and IPv6 headers, it does nothing with ETH_P_8021Q. Later, if OVS_ACTION_ATTR_POP_VLAN is executed, __pop_vlan_tci pulls the next vlan header into vlan_tci. This leads to two things: 1. Part of the resulting ethernet header is in the non-linear part of the skb. When eth_type_trans is called later as the result of OVS_ACTION_ATTR_OUTPUT, kernel BUGs in __skb_pull. Also, __pop_vlan_tci is in fact accessing random data when it reads past the TPID. 2. network_header points into the ethernet header instead of behind it. mac_len is set to a wrong value (10), too. Reported-by: Yulong Pei <ypei@redhat.com> Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: ipv6: fib: don't sleep inside atomic lockBenjamin Block1-1/+1
The function fib6_commit_metrics() allocates a piece of memory in mode GFP_KERNEL while holding an atomic lock from higher up in the stack, in the function __ip6_ins_rt(). This produces the following BUG: > BUG: sleeping function called from invalid context at mm/slub.c:1250 > in_atomic(): 1, irqs_disabled(): 0, pid: 2909, name: dhcpcd > 2 locks held by dhcpcd/2909: > #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81978e67>] rtnl_lock+0x17/0x20 > #1: (&tb->tb6_lock){++--+.}, at: [<ffffffff81a6951a>] ip6_route_add+0x65a/0x800 > CPU: 1 PID: 2909 Comm: dhcpcd Not tainted 3.17.0-rc1 #1 > Hardware name: ASUS All Series/Q87T, BIOS 0216 10/16/2013 > 0000000000000008 ffff8800c8f13858 ffffffff81af135a 0000000000000000 > ffff880212202430 ffff8800c8f13878 ffffffff810f8d3a ffff880212202c98 > 0000000000000010 ffff8800c8f138c8 ffffffff8121ad0e 0000000000000001 > Call Trace: > [<ffffffff81af135a>] dump_stack+0x4e/0x68 > [<ffffffff810f8d3a>] __might_sleep+0x10a/0x120 > [<ffffffff8121ad0e>] kmem_cache_alloc_trace+0x4e/0x190 > [<ffffffff81a6bcd6>] ? fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6bcd6>] fib6_commit_metrics+0x66/0x110 > [<ffffffff81a6cbf3>] fib6_add+0x883/0xa80 > [<ffffffff81a6951a>] ? ip6_route_add+0x65a/0x800 > [<ffffffff81a69535>] ip6_route_add+0x675/0x800 > [<ffffffff81a68f2a>] ? ip6_route_add+0x6a/0x800 > [<ffffffff81a6990c>] inet6_rtm_newroute+0x5c/0x80 > [<ffffffff8197cf01>] rtnetlink_rcv_msg+0x211/0x260 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff81119708>] ? lock_release_holdtime+0x28/0x180 > [<ffffffff81978e67>] ? rtnl_lock+0x17/0x20 > [<ffffffff8197ccf0>] ? __rtnl_unlock+0x20/0x20 > [<ffffffff819a989e>] netlink_rcv_skb+0x6e/0xd0 > [<ffffffff81978ee5>] rtnetlink_rcv+0x25/0x40 > [<ffffffff819a8e59>] netlink_unicast+0xd9/0x180 > [<ffffffff819a9600>] netlink_sendmsg+0x700/0x770 > [<ffffffff81103735>] ? local_clock+0x25/0x30 > [<ffffffff8194e83c>] sock_sendmsg+0x6c/0x90 > [<ffffffff811f98e3>] ? might_fault+0xa3/0xb0 > [<ffffffff8195ca6d>] ? verify_iovec+0x7d/0xf0 > [<ffffffff8194ec3e>] ___sys_sendmsg+0x37e/0x3b0 > [<ffffffff8111ef15>] ? trace_hardirqs_on_caller+0x185/0x220 > [<ffffffff81af979e>] ? mutex_unlock+0xe/0x10 > [<ffffffff819a55ec>] ? netlink_insert+0xbc/0xe0 > [<ffffffff819a65e5>] ? netlink_autobind.isra.30+0x125/0x150 > [<ffffffff819a6520>] ? netlink_autobind.isra.30+0x60/0x150 > [<ffffffff819a84f9>] ? netlink_bind+0x159/0x230 > [<ffffffff811f989a>] ? might_fault+0x5a/0xb0 > [<ffffffff8194f25e>] ? SYSC_bind+0x7e/0xd0 > [<ffffffff8194f8cd>] __sys_sendmsg+0x4d/0x80 > [<ffffffff8194f912>] SyS_sendmsg+0x12/0x20 > [<ffffffff81afc692>] system_call_fastpath+0x16/0x1b Fixing this by replacing the mode GFP_KERNEL with GFP_ATOMIC. Signed-off-by: Benjamin Block <bebl@mageta.org> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22net: fec: ptp: avoid register access when ipg clock is disabledNimrod Andy3-15/+41
The current kernel hang on i.MX6SX with rootfs mount from MMC. The root cause is that ptp uses a periodic timer to access enet register even if ipg clock is disabled. FEC ptp driver start one period timer to read 1588 counter register in the ptp init function that is called after FEC driver is probed. To save power, after FEC probe finish, FEC driver disable all clocks including ipg clock that is needed for register access. i.MX5x, i.MX6q/dl/sl FEC register access don't cause system hang when ipg clock is disabled, just return zero value. But for i.MX6sx SOC, it cause system hang. To avoid the issue, we need to check ptp clock status before ptp timer count access. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22Merge tag 'arm64-fixes' of ↵Linus Torvalds11-14/+24
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "This small set of fixes addresses a few issues introduced during the merge window, including: - fix typo in I-cache detection that was causing us to treat all I-caches as aliasing - hook up memfd_create and getrandom syscalls for native and compat - revert a temporary hack for defconfig builds in -next (the audit tree changes didn't make it in this merge window) - a couple of UEFI fixes for TEXT_OFFSET fuzzing and /memreserve/ - a simple sparsemem fix for 48-bit physical addressing - small defconfig updates to get autotesters working with X-gene" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "arm64: Do not invoke audit_syscall_* functions if !CONFIG_AUDIT_SYSCALL" arm64: mm: update max pa bits to 48 arm64: ignore DT memreserve entries when booting in UEFI mode arm64: configs: Enable X-Gene SATA and ethernet in defconfig arm64: align randomized TEXT_OFFSET on 4 kB boundary asm-generic: add memfd_create system call to unistd.h arm64: compat: wire up memfd_create and getrandom syscalls for aarch32 arm64: fix typo in I-cache policy detection
2014-08-22Merge tag 'iommu-fixes-v3.17-rc1' of ↵Linus Torvalds3-5/+15
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "The fixes include: - fix a crash in the VT-d driver when devices with a driver attached are hot-unplugged - fix a AMD IOMMU driver crash with device assignment of 32 bit PCI devices to KVM guests - fix for a copy&paste error in generic IOMMU code. Now the right function pointer is checked before calling" * tag 'iommu-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/core: Check for the right function pointer in iommu_map() iommu/amd: Fix cleanup_domain for mass device removal iommu/vt-d: Defer domain removal if device is assigned to a driver
2014-08-22drm/radeon: add additional SI pci idsAlex Deucher1-0/+4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-08-22drm/radeon: add new bonaire pci idsAlex Deucher1-0/+2
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-08-22drm/radeon: add new KV pci idAlex Deucher2-0/+2
bug: https://bugs.freedesktop.org/show_bug.cgi?id=82912 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-08-22Merge tag 'efi-urgent' of ↵Ingo Molnar8891-438698/+369916
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: * WARN_ON(!spin_is_locked()) always triggers on non-SMP machines. Swap it for the more canonical lockdep_assert_held() which always does the right thing - Guenter Roeck * Assign the correct value to efi.runtime_version on arm64 so that all the runtime services can be invoked - Semen Protsenko Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-08-22efi/arm64: Store Runtime Services revisionSemen Protsenko1-0/+2
"efi" global data structure contains "runtime_version" field which must be assigned in order to use it later in Runtime Services virtual calls (virt_efi_* functions). Before this patch "runtime_version" was unassigned (0), so each Runtime Service virtual call that checks revision would fail. Signed-off-by: Semen Protsenko <semen.protsenko@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-08-22firmware: Do not use WARN_ON(!spin_is_locked())Guenter Roeck1-4/+4
spin_is_locked() always returns false for uniprocessor configurations in several architectures, so do not use WARN_ON with it. Use lockdep_assert_held() instead to also reduce overhead in non-debug kernels. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-08-22cxgb4: Free completed tx skbs promptlyHariprasad Shenai3-2/+5
Description of problem: The NIC card is not reporting back to the driver the transmitted skbs, so they get stuck in the TX ring causing issues with reference counters in other kernel components. Developed a new Automatic Egress Queue Update firmware facility to slowly tick through Egress Queues and send back any outstanding CIDX Updates which are laying around. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22Merge tag 'linux-can-fixes-for-3.17-20140821' of ↵David S. Miller3-30/+43
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-08-21 The first patch is from Mirza Krak, it fixes the initialization of the hardware in the sja1000 driver. The next patch is contributed by Dan Carpenter, it fixes the error handling in the c_can's probe function. Then there are two patches for the flexcan driver, one by Alexander Stein, which fixes the resetting of the bus error interrupt mask, the other one by Sebastian Andrzej Siewior which adds an additional error state transition message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22cxgb4: Fix race condition in cleanupAnish Bhatt2-14/+19
There is a possible race condition when we unregister the PCI Driver and then flush/destroy the global "workq". This could lead to situations where there are tasks on the Work Queue with references to now deleted adapter data structures. Instead, have per-adapter Work Queues which were instantiated and torn down in init_one() and remove_one(), respectively. v2: Remove unnecessary call to flush_workqueue() before destroy_workqueue() Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22sctp: not send SCTP_PEER_ADDR_CHANGE notifications with failed probezhuyj1-0/+1
Since the transport has always been in state SCTP_UNCONFIRMED, it therefore wasn't active before and hasn't been used before, and it always has been, so it is unnecessary to bug the user with a notification. Reported-by: Deepak Khandelwal <khandelwal.deepak.1987@gmail.com> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Suggested-by: Michael Tuexen <tuexen@fh-muenster.de> Suggested-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Zhu Yanjun <Yanjun.Zhu@windriver.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22bnx2x: Revert UNDI flushing mechanismYuval Mintz1-75/+17
Commit 91ebb929b6f8 ("bnx2x: Add support for Multi-Function UNDI") [which was later supposedly fixed by de682941eef3 ("bnx2x: Fix UNDI driver unload")] introduced a bug in which in some [yet-to-be-determined] scenarios the alternative flushing mechanism which was to guarantee the Rx buffers are empty before resetting them during device probe will fail. If this happens, when device will be loaded once more a fatal attention will occur; Since this most likely happens in boot from SAN scenarios, the machine will fail to load. Notice this may occur not only in the 'Multi-Function' scenario but in the regular scenario as well, i.e., this introduced a regression in the driver's ability to perform boot from SAN. The patch reverts the mechanism and applies the old scheme to multi-function devices as well as to single-function devices. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22Merge branch 'qlcnic'David S. Miller5-15/+114
Shahed Shaikh says: ==================== qlcnic: Bug fixes This series fixes some bugs related to endianess. Please apply this series to net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22qlcnic: Fix endianess issue in firmware load from file operationShahed Shaikh1-10/+25
Firmware binary file is in little endian. On big-endian architecture, while writing this binary FW file to adapters memory, writel() swaps the data resulting into corruption of FW image. So, swap the data before writing into adapters memory. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22qlcnic: Fix endianess issue in FW dump template headerRajesh Borundia1-0/+57
Firmware dump template header is read from adapter using readl() which swaps the data. So, adjust structure element on the boundary of 32bit dword. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22qlcnic: Fix flash access interface to applicationJitendra Kalsaria3-5/+32
Application expects flash data in little endian, but driver reads/writes flash data using readl()/writel() APIs which swaps data on big endian machine. So, swap the data after reading from and before writing to flash memory. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22MAINTAINERS: Add section for MRF24J40 IEEE 802.15.4 radio driverAlan Ott1-0/+6
Alan is the original author of the driver. This change was discussed with the 802.15.4 subsystem maintainer, Alexander Aring. Signed-off-by: Alan Ott <alan@signal11.us> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22macvlan: Allow setting multicast filter on all macvlan typesVlad Yasevich1-2/+8
Currently, macvlan code restricts multicast and unicast filter setting only to passthru devices. As a result, if a guest using macvtap wants to receive multicast traffic, it has to set IFF_ALLMULTI or IFF_PROMISC. This patch makes it possible to use the fdb interface to add multicast addresses to the filter thus allowing a guest to receive only targeted multicast traffic. CC: John Fastabend <john.r.fastabend@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22packet: handle too big packets for PACKET_V3Eric Dumazet2-0/+18
af_packet can currently overwrite kernel memory by out of bound accesses, because it assumed a [new] block can always hold one frame. This is not generally the case, even if most existing tools do it right. This patch clamps too long frames as API permits, and issue a one time error on syslog. [ 394.357639] tpacket_rcv: packet too big, clamped from 5042 to 3966. macoff=82 In this example, packet header tp_snaplen was set to 3966, and tp_len was set to 5042 (skb->len) Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22MAINTAINERS: add entry for ec_bhf driverDariusz Marcinkiewicz1-0/+6
Added entry for ec_bhf driver. Signed-off-by: Dariusz Marcinkiewicz <reksio@newterm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22lec: Use rtnl lock/unlock when updating MTUchas williams - CONTRACTOR1-0/+2
The LECS response contains the MTU that should be used. Correctly synchronize with other layers when updating. Signed-off-by: Chas Williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-22Merge tag 'drm-intel-fixes-2014-08-21' of ↵Dave Airlie8-55/+109
git://anongit.freedesktop.org/drm-intel Display fixes from Ville and Imre, all cc: stable. * tag 'drm-intel-fixes-2014-08-21' of git://anongit.freedesktop.org/drm-intel: drm/i915: don't try to retrain a DP link on an inactive CRTC drm/i915: make sure VDD is turned off during system suspend drm/i915: cancel hotplug and dig_port work during suspend and unload drm/i915: fix HPD IRQ reenable work cancelation drm/i915: take display port power domain in DP HPD handler drm/i915: Don't try to enable cursor from setplane when crtc is disabled drm/i915: Skip load detect when intel_crtc->new_enable==true drm/i915: Fix locking for intel_enable_pipe_a()
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 12:55:50 +0300