summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-05-16mISDN: Reduce RX buffer allocation for transparent dataKarsten Keil10-188/+186
We did allways allocate maxsize buffers, but for transparent data we know the actual size. Use a common function to calculate size and detect overflows. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mISDN: Bugfix hfcsusb: usb endpoint activation/deactivationMartin Bachem1-8/+2
Here was a off by one in the activation/deactivation. The additional activation in open_bchannel() did hide it, but only if you do not try to use B2. Signed-off-by: Martin Bachem <info@colognechip.com> Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mISDN: avmfritz use the bigger fifo of chip version 2Karsten Keil1-27/+41
If we detect the latest hardware revision we should use the bigger fifo to avoid TX underruns and have less interrupts. TX underruns should be logged as warning. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mISDN: Early confirm for transparent dataKarsten Keil10-118/+43
It is better to send a confirm for transparent data early as possible to avoid TX underuns. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mISDN: Cleanup channel also if it already was deactivatedKarsten Keil8-49/+23
If a channel was closed after it was deactivated it could happen that something was not proper resetted. The test if a channel is still activ was wrong, so remove it and always do the cleanup. Signed-off-by: Karsten Keil <kkeil@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16Documentation/networking/ieee802154: update MAC chapteralex.bluesman.smirnov@gmail.com1-16/+59
Update the documentation according to latest changes. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16drivers/ieee802154: IEEE 802.15.4 loopback driveralex.bluesman.smirnov@gmail.com3-0/+303
Add support for IEEE 802.15.4 loopback driver - useful development and debugging tool. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: monitor device supportalex.bluesman.smirnov@gmail.com8-2/+150
Support for monitor device intended to capture all the network activity. This interface could be used by networks sniffers and is already supported by WireShark. That's a good test point to check that basic MAC support works. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: slaves management supportalex.bluesman.smirnov@gmail.com2-0/+145
This patch adds functionality for registration and removing slaves in the stack. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16ieee802154: interface type to be addedalex.bluesman.smirnov@gmail.com3-2/+15
This stack implementation distinguishes several types of slave interfaces. Another parameter to 'add_iface_' function is added to clarify the interface type is going to be registered. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: basic mib supportalex.bluesman.smirnov@gmail.com3-1/+97
Basic support for IEEE 802.15.4 management information base. Current implementation contains a command to set HW address only. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: basic MAC commands interface supportalex.bluesman.smirnov@gmail.com3-1/+48
Declare set of MAC-commands for reduced functionality interface. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: slave interfaces declarationalex.bluesman.smirnov@gmail.com1-0/+28
Slaves represent typical network interfaces available from userspace. Each ieee802154 device/transceiver may have several slaves and able to be associated with several networks at the same time. So this patch adds structure for slaves declaration. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: declare reduced mlme operationsalex.bluesman.smirnov@gmail.com1-5/+20
According IEEE 802.15.4 standard each node can be either full functionality device (FFD) or reduce functionality device (RFD). So 2 sets of operations are needed. This patch declare RFD operations structure. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: TX data pathalex.bluesman.smirnov@gmail.com3-1/+122
Main TX data path implementation between upper and physical layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: RX data pathalex.bluesman.smirnov@gmail.com4-1/+119
Main RX data path implementation between physical and mac layers. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: allocation of ieee802154 devicealex.bluesman.smirnov@gmail.com7-0/+239
An interface to allocate and register ieee802154 compatible device. The allocated device has the following representation in memory: +-----------------------+ | struct wpan_phy | +-----------------------+ | struct mac802154_priv | +-----------------------+ | driver's private data | +-----------------------+ Used by device drivers to register new instance in the stack. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16mac802154: basic ieee802.15.4 device structuresalex.bluesman.smirnov@gmail.com1-0/+126
The IEEE 802.15.4 Working Group focuses on the standardization of the bottom two layers of ISO/OSI protocol stack: Physical (PHY) and MAC. The MAC layer provides access control to a shared channel and reliable data delivery. The main functions performed by the MAC sublayer are: association and disassociation, security control, optional star network topology functions, such as beacon generation and Guaranteed Time Slots (GTSs) management, generation of ACK frames (if used), and, finally, application support for the two possible network topologies described in the standard. This is an initial commit which describes main data structures needed for ieee802.15.4 compatible devices representation in the MAC layer. Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16isdn: Fix typo in hfcmulti.cMasanari Iida1-2/+2
Correcting spelling "extenal" to "external" in hfcmulti.c Signed-off-by: Masanari Iida <standby24x7@gmail.com>
2012-05-16Merge branch 'delete-tokenring' of ↵David S. Miller68-26213/+33
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
2012-05-16net: ipv4 and ipv6: Convert printk(KERN_DEBUG to pr_debugJoe Perches12-57/+58
Use the current debugging style and enable dynamic_debug. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net: ipv6: Standardize prefixes for message loggingJoe Perches16-120/+116
Add #define pr_fmt(fmt) as appropriate. Add "IPv6: " to appropriate files. Convert printk(KERN_<LEVEL> to pr_<level> (but not KERN_DEBUG). Standardize on "%s: " not "%s(): " when emitting __func__. Use "%s: ", __func__ instead of embedding function name. Coalesce formats, align arguments. ADDRCONF output is now prefixed with "IPv6: " Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16netdev/phy: Make get_phy_id() static and quit EXPORTing it.David Daney2-3/+1
This function is only referenced from within phy_device.c, so there is no reason to export it. In fact, we can make it static. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Fixed error flow in rem_slave_eqsJack Morgenstein1-7/+6
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Add XRC domains and counters to resource trackerJack Morgenstein4-5/+275
Add missing resource tracking for XRC domains and complete the tracking for HCA network flow counters. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Fix potential kernel Oops in res tracker during Dom0 driver ↵Jack Morgenstein4-8/+26
unload Currently the slave and master resources are deleted after master freed all bitmaps. If any resources were not properly cleaned up during the shutdown process, an Oops would result. Fix so that delete slave (only) resources during cleanup. Master resources are cleaned up during unload process, and need not separately be cleaned. Note that during cleanup, we need to split the resource-tracker freeing functionality. Before removing all the bitmaps, we free any leftover slave resources. However, we can only remove the resource tracker linked list after all bitmap frees, since some of the freeing functions (e.g., mlx4_cleanup_eq_table) use paravirtualized FW commands which expect the resource tracker linked list to be present. Found-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Do not reset module-parameter num_vfs when fail to enable sriovJack Morgenstein1-3/+2
Consider the following scenario: 2 HCAs, where only one of which can run SRIOV. If we reset the module parameter, all the VFs of the SRIOV HCA will be claimed by the PPF host (-- the code relies on num_vfs being non-zero to avoid this claiming, and num_vfs was reset when pci_enable_sriov failed for the non-SRIOV HCA). The solution is not to touch the num_vfs parameter. Also, eliminate the unneeded check of num_vfs when disabling sriov (the dev flag bit is sufficient). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Remove unused *_str functions from the resource trackerJack Morgenstein1-30/+0
Removed unsued *_str helper functions from resource_tracker.c Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Change SYNC_TPT to be native (not wrapped)Jack Morgenstein1-1/+1
The "wrapped" was incorrect, since no wrapper function was defined. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4_core: Fix init_port mask state for slavesJack Morgenstein1-2/+1
In function mlx4_INIT_PORT_wrapper, the port state mask for the slave is only set if we are invoking the INIT_PORT fw command. However, the reference count for the (initialized) port is incremented anyway. This creates a problem in that when we have multiple slaves, then the CLOSE_PORT command will never be invoked. The reason is that in the CLOSE_PORT wrapper, if the port-state mask is zero for the slave (which it is), the wrapper returns without doing anything. The only slave which will not return immediately in the CLOSE_PORT wrapper is that slave for which INIT_PORT was invoked. The fix is to not have the port-state mask setting depend on the logic for calling the INIT_PORT fw command. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16net/mlx4: Address build warnings on set but not used variablesOr Gerlitz5-18/+8
Handle the compiler warnings on variables which are set but not used by removing the relevant variable or casting a return value which is ignored on purpose to void. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-16tokenring: delete all remaining driver supportPaul Gortmaker43-25869/+0
This represents the mass deletion of the of the tokenring support. It gets rid of: - the net/tr.c which the drivers depended on - the drivers/net component - the Kbuild infrastructure around it - any tokenring related CONFIG_ settings in any defconfigs - the tokenring headers in the include/linux dir - the firmware associated with the tokenring drivers. - any associated token ring documentation. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-16net: delete all instances of special processing for token ringPaul Gortmaker18-148/+14
We are going to delete the Token ring support. This removes any special processing in the core networking for token ring, (aside from net/tr.c itself), leaving the drivers and remaining tokenring support present but inert. The mass removal of the drivers and net/tr.c will be in a separate commit, so that the history of these files that we still care about won't have the giant deletion tied into their history. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-16atm: remove the coupling to token ring supportPaul Gortmaker3-138/+8
The token ring support is going away, so decouple the atm support from it in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-16s390: delete any traces of token ring supportPaul Gortmaker5-58/+11
The token ring support is going away from the core kernel. Divorce the S390 drivers from it in advance. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-05-15xfrm: Convert several xfrm policy match functions to bool.David S. Miller2-19/+20
xfrm_selector_match xfrm_sec_ctx_match __xfrm4_selector_match __xfrm6_selector_match Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15net: Convert net_ratelimit uses to net_<level>_ratelimitedJoe Perches76-490/+306
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15net: Add net_ratelimited_function and net_<level>_ratelimited macrosJoe Perches1-0/+23
__ratelimit() can be considered an inverted bool test because it returns true when not ratelimited. Several tests in the kernel tree use this __ratelimit() function incorrectly. No net_ratelimit uses are incorrect currently though. Most uses of net_ratelimit are to log something via printk or pr_<level>. In order to minimize the uses of net_ratelimit, and to start standardizing the code style used for __ratelimit() and net_ratelimit(), add a net_ratelimited_function() macro and net_<level>_ratelimited() logging macros similar to pr_<level>_ratelimited that use the global net_ratelimit instead of a static per call site "struct ratelimit_state". Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15dummy: documentation is staleAlan Cox1-4/+1
dummy0/1/2 names are always used and there are options to set multiple dummy devices. Remove the obsolete text Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42865 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15xfrm_algo: drop an unnecessary inclusionJan Beulich1-3/+0
For several releases, this has not been needed anymore, as no helper functions declared in net/ah.h get implemented by xfrm_algo.c anymore. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15xfrm: make xfrm_algo.c a moduleJan Beulich5-9/+17
By making this a standalone config option (auto-selected as needed), selecting CRYPTO from here rather than from XFRM (which is boolean) allows the core crypto code to become a module again even when XFRM=y. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15qlcnic-ethtool: set the ethtool_dump flag by ETH_FW_DUMP_DISABLE value that ↵Manish chopra1-1/+6
is zero, if firmware dump is disabled. Signed-off-by: Manish chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15linux/ethtool: Added macro ETH_FW_DUMP_DISABLEManish chopra1-1/+6
o flag field of ethtool_dump structure must be initialized by this macro value that is zero, if the firmware dump is disabled. by this we can get the firmware dump capability [enable/disable] via ethtool Signed-off-by: Manish chopra <manish.chopra@qlogic.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15stmmac: fix suspend/resume lockingGiuseppe CAVALLARO1-4/+6
Upon resume from standby, there is a possible interrupt unsafe locking scenario raised when configure the Kernel with CONFIG_PROVE_LOCKING. So this patch fixes that in PM driver stuff by calling lock/unlock_irqsave/restore. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15stmmac: add mixed burst for DMAGiuseppe CAVALLARO6-5/+13
In mixed burst (MB) mode, the AHB master always initiates the bursts with fixed-size when the DMA requests transfers of size less than or equal to 16 beats. This patch adds the MB support and the flag that can be passed from the platform to select it. MB mode can also give some benefits in terms of performances on some platforms. v2: fixed Coding Style Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15stmmac: extend mac addr reg and fix perfect fileringGiuseppe CAVALLARO7-10/+29
This patch is to extend the number of MAC address registers for 16 to 32. In fact, other new 16 registers are available in new chips and this can help on perfect filter mode for unicast. This patch also fixes the perfect filtering mode by setting the bit 31 in the MAC address registers. v2: fixed Coding Style. Signed-off-by: Gianni Antoniazzi <gianni.antoniazzi-ext@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15dm9000: some coldfire boards need thisSteven King1-1/+1
Some coldfire boards (ie m5253demo) have a dm9000 onboard. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15codel: use u16 field instead of 31bits for rec_inv_sqrtEric Dumazet1-10/+15
David pointed out gcc might generate poor code with 31bit fields. Using u16 is more than enough and permits a better code output. Also make the code intent more readable using constants, fixed point arithmetic not being trivial for everybody. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-15Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller11-29/+64
Included changes: * an improvement to avoid to linearise the whole received packet when not needed * an improvement for client traffic rerouting after roaming * a fix for the local translation table state-machine * minor cleanups and fixes
2012-05-15Merge branch 'master' of ↵David S. Miller43-244/+893
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-26 00:17:20 +0300