| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull more parisc architecture updates from Helge Deller:
"Fixes and enhancements:
- a memory leak fix in an error path in pdc_stable (Miaoqian Lin)
- two compiler warning fixes in the TOC code
- added autodetection for currently used console type (serial or
graphics) which inserts console=<type> if it's missing"
* tag 'for-5.17/parisc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: pdc_stable: Fix memory leak in pdcs_register_pathentries
parisc: Fix missing prototype for 'toc_intr' warning in toc.c
parisc: Autodetect default output device and set console= kernel parameter
parisc: Use safer strscpy() in setup_cmdline()
parisc: Add visible flag to toc_stack variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for sv48 paging
- Hart ID mappings are now sparse, which enables more CPUs to come up
on systems with sparse hart IDs
- A handful of cleanups and fixes
* tag 'riscv-for-linus-5.17-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (27 commits)
RISC-V: nommu_virt: Drop unused SLAB_MERGE_DEFAULT
RISC-V: Remove redundant err variable
riscv: dts: sifive unmatched: Add gpio poweroff
riscv: canaan: remove useless select of non-existing config SYSCON
RISC-V: Do not use cpumask data structure for hartid bitmap
RISC-V: Move spinwait booting method to its own config
RISC-V: Move the entire hart selection via lottery to SMP
RISC-V: Use __cpu_up_stack/task_pointer only for spinwait method
RISC-V: Do not print the SBI version during HSM extension boot print
RISC-V: Avoid using per cpu array for ordered booting
riscv: default to CONFIG_RISCV_SBI_V01=n
riscv: fix boolconv.cocci warnings
riscv: Explicit comment about user virtual address space size
riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
riscv: Implement sv48 support
asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
riscv: Allow to dynamically define VA_BITS
riscv: Introduce functions to switch pt_ops
riscv: Split early kasan mapping to prepare sv48 introduction
riscv: Move KASAN mapping next to the kernel mapping
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes/cleanups from Catalin Marinas:
"Some fixes that turned up during the merge window:
- Add brackets to the io_stop_wc macro
- Avoid -Warray-bounds warning with the LSE atomics inline asm
- Apply __ro_after_init to memory_limit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: apply __ro_after_init to memory_limit
arm64: atomics: lse: Dereference matching size
asm-generic: Add missing brackets for io_stop_wc macro
|
|
Pull documentation fixes from Jonathan Corbet:
"Three small documentation fixes"
* tag 'docs-5.17-2' of git://git.lwn.net/linux:
Documentation: fix firewire.rst ABI file path error
docs: ftrace: fix ambiguous sentence
docs: staging/tee.rst: fix two typos found while reading
|
|
kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Fix memory leak by calling kobject_put().
Fixes: 73f368cf679b ("Kobject: change drivers/parisc/pdc_stable.c to use kobject_init_and_add")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for race condition that could lead to NULL pointer dereferences
or UAF during uhid device destruction (Jann Horn)
- contact count handling regression fixes for Wacom devices (Jason
Gerecke)
- fix for handling unnumbered HID reports handling in Google Vivaldi
driver (Dmitry Torokhov)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Avoid using stale array indicies to read contact count
HID: wacom: Ignore the confidence flag when a touch is removed
HID: wacom: Reset expected and received contact counts at the same time
HID: uhid: Use READ_ONCE()/WRITE_ONCE() for ->running
HID: uhid: Fix worker destroying device without any protection
HID: vivaldi: Minor cleanups
HID: vivaldi: fix handling devices not using numbered reports
HID: Ignore battery for Elan touchscreen on HP Envy X360 15t-dr100
|
|
Pull block fixes from Jens Axboe:
"Various little minor fixes that should go into this release:
- Fix issue with cloned bios and IO accounting (Christoph)
- Remove redundant assignments (Colin, GuoYong)
- Fix an issue with the mq-deadline async_depth sysfs interface (me)
- Fix brd module loading race (Tetsuo)
- Shared tag map wakeup fix (Laibin)
- End of bdev read fix (OGAWA)
- srcu leak fix (Ming)"
* tag 'block-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
block: fix async_depth sysfs interface for mq-deadline
block: Fix wrong offset in bio_truncate()
block: assign bi_bdev for cloned bios in blk_rq_prep_clone
block: cleanup q->srcu
block: Remove unnecessary variable assignment
brd: remove brd_devices_mutex mutex
aoe: remove redundant assignment on variable n
loop: remove redundant initialization of pointer node
blk-mq: fix tag_get wait task can't be awakened
|
|
If we ever see a touch report with contact count data we initialize
several variables used to read the contact count in the pre-report
phase. These variables are never reset if we process a report which
doesn't contain a contact count, however. This can cause the pre-
report function to trigger a read of arbitrary memory (e.g. NULL
if we're lucky) and potentially crash the driver.
This commit restores resetting of the variables back to default
"none" values that were used prior to the commit mentioned
below.
Link: https://github.com/linuxwacom/input-wacom/issues/276
Fixes: 003f50ab673c (HID: wacom: Update last_slot_field during pre_report phase)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
AES hardware may internally re-classify a contact that it thought was
intentional as a palm. Intentional contacts are reported as "down" with
the confidence bit set. When this re-classification occurs, however, the
state transitions to "up" with the confidence bit cleared. This kind of
transition appears to be legal according to Microsoft docs, but we do
not handle it correctly. Because the confidence bit is clear, we don't
call `wacom_wac_finger_slot` and update userspace. This causes hung
touches that confuse userspace and interfere with pen arbitration.
This commit adds a special case to ignore the confidence flag if a contact
is reported as removed. This ensures we do not leave a hung touch if one
of these re-classification events occured. Ideally we'd have some way to
also let userspace know that the touch has been re-classified as a palm
and needs to be canceled, but that's not possible right now :)
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: 7fb0413baa7f (HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts)
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
These two values go hand-in-hand and must be valid for the driver to
behave correctly. We are currently lazy about updating the values and
rely on the "expected" code flow to take care of making sure they're
valid at the point they're needed. The "expected" flow changed somewhat
with commit f8b6a74719b5 ("HID: wacom: generic: Support multiple tools
per report"), however. This led to problems with the DTH-2452 due (in
part) to *all* contacts being fully processed -- even those past the
expected contact count. Specifically, the received count gets reset to
0 once all expected fingers are processed, but not the expected count.
The rest of the contacts in the report are then *also* processed since
now the driver thinks we've only processed 0 of N expected contacts.
Later commits such as 7fb0413baa7f (HID: wacom: Use "Confidence" flag to
prevent reporting invalid contacts) worked around the DTH-2452 issue by
skipping the invalid contacts at the end of the report, but this is not
a complete fix. The confidence flag cannot be relied on when a contact
is removed (see the following patch), and dealing with that condition
re-introduces the DTH-2452 issue unless we also address this contact
count laziness. By resetting expected and received counts at the same
time we ensure the driver understands that there are 0 more contacts
expected in the report. Similarly, we also make sure to reset the
received count if for some reason we're out of sync in the pre-report
phase.
Link: https://github.com/linuxwacom/input-wacom/issues/288
Fixes: f8b6a74719b5 ("HID: wacom: generic: Support multiple tools per report")
CC: stable@vger.kernel.org
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Pull io_uring fixes from Jens Axboe:
- Fix the io_uring POLLFREE handling, similarly to how it was done for
aio (Pavel)
- Remove (now) unused function (Jiapeng)
- Small series fixing an issue with work cancelations. A window exists
where work isn't locatable in the pending list, and isn't active in a
worker yet either. (me)
* tag 'io_uring-5.17-2022-01-21' of git://git.kernel.dk/linux-block:
io-wq: delete dead lock shuffling code
io_uring: perform poll removal even if async work removal is successful
io-wq: add intermediate work step between pending list and active work
io-wq: perform both unstarted and started work cancelations in one go
io-wq: invoke work cancelation with wqe->lock held
io-wq: make io_worker lock a raw spinlock
io-wq: remove useless 'work' argument to __io_worker_busy()
io_uring: fix UAF due to missing POLLFREE handling
io_uring: Remove unused function req_ref_put
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A small set of HD-audio and USB-audio fixes as well as a couple of
ALSA core fixes. Most of them are fix-ups for the newly added CS35L41
codec"
* tag 'sound-fix-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/cs8409: Add new Warlock SKUs to patch_cs8409
ALSA: core: Simplify snd_power_ref_and_wait() with the standard macro
ALSA: hda: cs35l41: Make cs35l41_hda_remove() return void
ALSA: hda: cs35l41: Tidyup code
ALSA: hda: cs35l41: Make use of the helper function dev_err_probe()
ALSA: hda: cs35l41: Add missing default cases
ALSA: hda: cs35l41: Move cs35l41* calls to its own symbol namespace
ALSA: hda: cs35l41: Add calls to newly added test key function
ALSA: hda: cs35l41: Avoid overwriting register patch
ALSA: core: Fix SSID quirk lookup for subvendor=0
ALSA: usb-audio: add mapping for MSI MPG X570S Carbon Max Wifi.
ALSA: hda/realtek: fix speakers and micmute on HP 855 G8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
|
|
Pull drm fixes from Dave Airlie:
"Thanks to Daniel for taking care of things while I was out, just a set
of merge window fixes that came in this week, two i915 display fixes
and a bunch of misc amdgpu, along with a radeon regression fix.
amdgpu:
- SR-IOV fix
- VCN harvest fix
- Suspend/resume fixes
- Tahiti fix
- Enable GPU recovery on yellow carp
radeon:
- Fix error handling regression in radeon_driver_open_kms
i915:
- Update EHL display voltage swing table
- Fix programming the ADL-P display TC voltage swing"
* tag 'drm-next-2022-01-21' of git://anongit.freedesktop.org/drm/drm:
drm/radeon: fix error handling in radeon_driver_open_kms
drm/amd/amdgpu: fixing read wrong pf2vf data in SRIOV
drm/amdgpu: apply vcn harvest quirk
drm/i915/display/adlp: Implement new step in the TC voltage swing prog sequence
drm/i915/display/ehl: Update voltage swing table
drm/amd/display: Revert W/A for hard hangs on DCN20/DCN21
drm/amdgpu: drop flags check for CHIP_IP_DISCOVERY
drm/amdgpu: Fix rejecting Tahiti GPUs
drm/amdgpu: don't do resets on APUs which don't support it
drm/amdgpu: invert the logic in amdgpu_device_should_recover_gpu()
drm/amdgpu: Enable recovery on yellow carp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Some hot fixes for clk driver patches merged last week and one oops
fix:
- Fix license on recent MediaTek drivers
- Initialize a variable before use in the new Visconti driver
- Avoid an oops by unregistering the clk provider in si5341"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mediatek: relicense mt7986 clock driver to GPL-2.0
clk: visconti: Fix uninitialized variable in printk
clk: si5341: Fix clock HW provider cleanup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
- Reserve "stolen memory" for integrated Intel GPU, even if it's not
the first GPU to be enumerated (Lucas De Marchi)
* tag 'pci-v5.17-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
x86/gpu: Reserve stolen memory for first integrated Intel GPU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- add Sven Schnelle as reviewer for s390 code
- make uaccess code more readable
- change cpu measurement facility code to also support counter second
version number 7, and add discard support for limited samples
* tag 's390-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add Sven Schnelle as reviewer
s390/uaccess: introduce bit field for OAC specifier
s390/cpumf: Support for CPU Measurement Sampling Facility LS bit
s390/cpumf: Support for CPU Measurement Facility CSVN 7
|
|
Pull more xfs irix ioctl housecleaning from Darrick Wong:
"Withdraw the XFS_IOC_ALLOCSP* and XFS_IOC_FREESP* ioctl definitions.
This is the third and final of a series of small pull requests that
perform some long overdue housecleaning of XFS ioctls. This time,
we're withdrawing all variants of the ALLOCSP and FREESP ioctls from
XFS' userspace API. This might be a little premature since we've only
just removed the functionality, but as I pointed out in the last pull
request, nobody (including fstests) noticed that it was broken for 20
years.
In response to the patch, we received a single comment from someone
who stated that they 'augment' the ioctl for their own purposes, but
otherwise acquiesced to the withdrawal. I still want to try to clobber
these old ioctl definitions in 5.17.
So remove the header definitions for these ioctls. The just-removed
implementation has allowed callers to read stale disk contents for
more than **21 years** and nobody noticed or complained, which implies
a lack of users aside from exploit programs"
* tag 'xfs-5.17-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove the XFS_IOC_{ALLOC,FREE}SP* definitions
|
|
Pull xfs irix ioctl housecleaning from Darrick Wong:
"Remove the XFS_IOC_ALLOCSP* and XFS_IOC_FREESP* ioctl families.
This is the second of a series of small pull requests that perform
some long overdue housecleaning of XFS ioctls. This time, we're
vacating the implementation of all variants of the ALLOCSP and FREESP
ioctls, which are holdovers from EFS in Irix, circa 1993. Roughly
equivalent functionality have been available for both ioctls since
2.6.25 (April 2008):
- XFS_IOC_FREESP ftruncates a file.
- XFS_IOC_ALLOCSP is the equivalent of fallocate.
As noted in the fix patch for CVE 2021-4155, the ALLOCSP ioctl has
been serving up stale disk blocks since 2000, and in 21 years
**nobody** noticed. On those grounds I think it's safe to vacate the
implementation.
Note that we lose the ability to preallocate and truncate relative to
the current file position, but as nobody's ever implemented that for
the VFS, I conclude that it's not in high demand.
Linux has always used fallocate as the space management system call,
whereas these Irix legacy ioctls only ever worked on XFS, and have
been the cause of recent stale data disclosure vulnerabilities. As
equivalent functionality is available elsewhere, remove the code"
* tag 'xfs-5.17-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: kill the XFS_IOC_{ALLOC,FREE}SP* ioctls
|
|
Pull xfs ioctl housecleaning from Darrick Wong:
"This is the first of a series of small pull requests that perform some
long overdue housecleaning of XFS ioctls. This first pull request
removes the FSSETDM ioctl, which was used to set DMAPI event
attributes on XFS files. The DMAPI support has never been merged
upstream and the implementation of FSSETDM itself was removed two
years ago, so let's withdraw it completely.
- Withdraw the ioctl definition for the FSSETDM ioctl"
* tag 'xfs-5.17-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove the XFS_IOC_FSSETDM definitions
|
|
Adjust the path of the ABI files for firewire.rst to prevent a
documentation build error. Prevents this problem:
Sphinx parallel build error:
docutils.utils.SystemMessage: Documentation/driver-api/firewire.rst:22: (SEVERE/4) Problems with "include" directive path:
InputError: [Errno 2] No such file or directory: '../Documentation/driver-api/ABI/stable/firewire-cdev'.
Fixes: 2f4830ef96d2 ("FireWire: add driver-api Introduction section")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220119033905.4779-1-rdunlap@infradead.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-fixes-5.17-2022-01-19:
amdgpu:
- SR-IOV fix
- VCN harvest fix
- Suspend/resume fixes
- Tahiti fix
- Enable GPU recovery on yellow carp
radeon:
- Fix error handling regression in radeon_driver_open_kms
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120013547.5649-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Latest updates for the EHL display voltage swing table (José Roberto de Souza)
- Additional step is required when programming the ADL-P display TC voltage swing (José Roberto de Souza)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yek1zdsnRPiBVvFF@tursulin-mobl2
|
|
Our nommu_virt_defconfig set SLOB=y and SLAB_MERGE_DEFAULT=n. As of
eb52c0fc2331 ("mm: Make SLAB_MERGE_DEFAULT depend on SL[AU]B") it's no
longer necessary to set the second, which appears to never have had any
effect for SLOB=y anyway.
This was suggested by savedefconfig.
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fix a missing prototype warning noticed by the kernel test robot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Usually palo (the PA-RISC boot loader) will check at boot time if the
machine/firmware was configured to use the serial line (ttyS0, SERIAL_x)
or the graphical display (tty0, graph) as default output device and add
the correct "console=ttyS0" or "console=tty0" Linux kernel parameter to
the kernel command line when starting the Linux kernel.
But the kernel could also have been started via the HP-UX boot loader
or directly in qemu, in which cases the console parameter is missing.
This patch fixes this problem by adding the correct console= parameter
if it's missing in the current kernel command line.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Return value from user_regset_copyin() directly instead of taking this
in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
A previous commit added this feature, but it inadvertently used the wrong
variable to show/store the setting from/to, victimized by copy/paste. Fix
it up so that the async_depth sysfs interface reads and writes from the
right setting.
Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215485
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some of the GPIO pins on the Unmatched are wire up to control the power
of the board, indicate that in the device tree.
Signed-off-by: Ron Economos <w6rz@comcast.net>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The config SYSCON never existed in the kernel repository; so, the select of
that config in ./drivers/soc/canaan/Kconfig has no effect.
Presumably, this was just some mistake, assuming some symmetry in handling
and naming of configs that simply does not exist.
Remove this useless select of a non-existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The spinwait booting method should only be used for platforms with older
firmware without SBI HSM extension or M-mode firmware because spinwait
method can't support cpu hotplug, kexec or sparse hartid. It is better
to move the entire spinwait implementation to its own config which can
be disabled if required. It is enabled by default to maintain backward
compatibility and M-mode Linux.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The booting hart selection via lottery is only useful for SMP systems.
Moreover, the lottery selection is only necessary for systems using
spinwait booting method. It is better to keep the entire lottery
selection together so that it can be disabled in future.
Move the lottery selection code to under CONFIG_SMP.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The __cpu_up_stack/task_pointer array is only used for spinwait method
now. The per cpu array based lookup is also fragile for platforms with
discontiguous/sparse hartids. The spinwait method is only used for
M-mode Linux or older firmwares without SBI HSM extension. For general
Linux systems, ordered booting method is preferred anyways to support
cpu hotplug and kexec.
Make sure that __cpu_up_stack/task_pointer is only used for spinwait
method. Take this opportunity to rename it to
__cpu_spinwait_stack/task_pointer to emphasize the purpose as well.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
The HSM extension information log also prints the SBI version v0.2. This
is misleading as the underlying firmware SBI version may be different
from v0.2.
Remove the unncessary printing of SBI version.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Currently both order booting and spinwait approach uses a per cpu
array to update stack & task pointer. This approach will not work for the
following cases.
1. If NR_CPUs are configured to be less than highest hart id.
2. A platform has sparse hartid.
This issue can be fixed for ordered booting as the booting cpu brings up
one cpu at a time using SBI HSM extension which has opaque parameter
that is unused until now.
Introduce a common secondary boot data structure that can store the stack
and task pointer. Secondary harts will use this data while booting up
to setup the sp & tp.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Use the api number 134 for KVM_GET_XSAVE2, instead of 42, which has been
used by KVM_GET_XSAVE.
Also, fix the WARNINGs of the underlines being too short.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Message-Id: <20220120045003.315177-1-wei.w.wang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following warning appears when executing
make -C tools/testing/selftests/kvm
include/x86_64/processor.h:290:2: warning: 'ecx' may be used uninitialized in this
function [-Wmaybe-uninitialized]
asm volatile("cpuid"
^~~
lib/x86_64/processor.c:1523:21: note: 'ecx' was declared here
uint32_t eax, ebx, ecx, edx, max_ext_leaf;
Just initialize ecx to remove this warning.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119140325.59369-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The following warning appears when executing
make -C tools/testing/selftests/kvm
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_intel_br_retired':
x86_64/pmu_event_filter_test.c:241:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
241 | struct kvm_cpuid2 *cpuid;
| ^~~~~
x86_64/pmu_event_filter_test.c: In function 'vcpu_supports_amd_zen_br_retired':
x86_64/pmu_event_filter_test.c:258:28: warning: variable 'cpuid' set but not used [-Wunused-but-set-variable]
258 | struct kvm_cpuid2 *cpuid;
| ^~~~~
Just delete the unused variables to stay away from warnings.
Fixes: dc7e75b3b3ee ("selftests: kvm/x86: Add test for KVM_SET_PMU_EVENT_FILTER")
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220119133910.56285-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The SBI 0.1 specification is obsolete. The current version is 0.3.
Hence we should not rely by default on SBI 0.1 being implemented.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Fix the same error check issue in two drivers. And then the drivers
are fixed even more because the first patches were incomplete which I
missed.
Summary:
- fix the error checks of platform_get_irq() in gpio-mpc8xxx and
gpio-idt3243x"
* tag 'gpio-fixes-for-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mpc8xxx: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix an ignored error return from platform_get_irq()
gpio: idt3243x: Fix IRQ check in idt_gpio_probe
gpio: mpc8xxx: Fix IRQ check in mpc8xxx_probe
|
|
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220120105618.249144-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
bio_truncate() clears the buffer outside of last block of bdev, however
current bio_truncate() is using the wrong offset of page. So it can
return the uninitialized data.
This happened when both of truncated/corrupted FS and userspace (via
bdev) are trying to read the last of bdev.
Reported-by: syzbot+ac94ae5f68b84197f41c@syzkaller.appspotmail.com
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/875yqt1c9g.fsf@mail.parknet.co.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull ceph updates from Ilya Dryomov:
"The highlight is the new mount "device" string syntax implemented by
Venky Shankar. It solves some long-standing issues with using
different auth entities and/or mounting different CephFS filesystems
from the same cluster, remounting and also misleading /proc/mounts
contents. The existing syntax of course remains to be maintained.
On top of that, there is a couple of fixes for edge cases in quota and
a new mount option for turning on unbuffered I/O mode globally instead
of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)"
* tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client:
ceph: move CEPH_SUPER_MAGIC definition to magic.h
ceph: remove redundant Lsx caps check
ceph: add new "nopagecache" option
ceph: don't check for quotas on MDS stray dirs
ceph: drop send metrics debug message
rbd: make const pointer spaces a static const array
ceph: Fix incorrect statfs report for small quota
ceph: mount syntax module parameter
doc: document new CephFS mount device syntax
ceph: record updated mon_addr on remount
ceph: new device mount syntax
libceph: rename parse_fsid() to ceph_parse_fsid() and export
libceph: generalize addr/ip parsing based on delimiter
|
|
Pull ksmbd server fixes from Steve French:
- authentication fix
- RDMA (smbdirect) fixes (including fix for a memory corruption, and
some performance improvements)
- multiple improvements for multichannel
- misc fixes, including crediting (flow control) improvements
- cleanup fixes, including some kernel doc fixes
* tag '5.17-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd: (23 commits)
ksmbd: fix guest connection failure with nautilus
ksmbd: uninitialized variable in create_socket()
ksmbd: smbd: fix missing client's memory region invalidation
ksmbd: add smb-direct shutdown
ksmbd: smbd: change the default maximum read/write, receive size
ksmbd: smbd: create MR pool
ksmbd: add reserved room in ipc request/response
ksmbd: smbd: call rdma_accept() under CM handler
ksmbd: limits exceeding the maximum allowable outstanding requests
ksmbd: move credit charge deduction under processing request
ksmbd: add support for smb2 max credit parameter
ksmbd: set 445 port to smbdirect port by default
ksmbd: register ksmbd ib client with ib_register_client()
ksmbd: Fix smb2_get_name() kernel-doc comment
ksmbd: Delete an invalid argument description in smb2_populate_readdir_entry()
ksmbd: Fix smb2_set_info_file() kernel-doc comment
ksmbd: Fix buffer_check_err() kernel-doc comment
ksmbd: fix multi session connection failure
ksmbd: set both ipv4 and ipv6 in FSCTL_QUERY_NETWORK_INTERFACE_INFO
ksmbd: set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix sparse endian warnings in IGD code (Alex Williamson)
- Balance kvzalloc with kvfree (Jiacheng Shi)
* tag 'vfio-v5.17-rc1' of git://github.com/awilliam/linux-vfio:
vfio/iommu_type1: replace kfree with kvfree
vfio/pci: Resolve sparse endian warnings in IGD support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This contains a number of nice cleanups and improvements for the core
and various drivers, as well as a minor tweak to the json-schema
device tree bindings"
* tag 'pwm/for-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
dt-bindings: pwm: Avoid selecting schema on node name match
pwm: img: Use only a single idiom to get a runtime PM reference
pwm: vt8500: Implement .apply() callback
pwm: img: Implement .apply() callback
pwm: twl: Implement .apply() callback
pwm: Restore initial state if a legacy callback fails
pwm: Prevent a glitch for legacy drivers
pwm: Move legacy driver handling into a dedicated function
|
|
This variable is only set during initialization, so mark with
__ro_after_init.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20211215064559.2843555-1-peng.fan@oss.nxp.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
