| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20240812160146.517184156@linuxfoundation.org
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e0391e92f9ab4fb3dbdeb139c967dcfa7ac4b115 upstream.
If we do a direct IO sync write, at btrfs_sync_file(), and we need to skip
inode logging or we get an error starting a transaction or an error when
flushing delalloc, we end up unlocking the inode when we shouldn't under
the 'out_release_extents' label, and then unlock it again at
btrfs_direct_write().
Fix that by checking if we have to skip inode unlocking under that label.
Reported-by: syzbot+7dbbb74af6291b5a5a8b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/000000000000dfd631061eaeb4bc@google.com/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d2868b5d191c74262f7407972d68d1bf3245d6a upstream.
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bec1f3b119ebc613d08dfbcdbaef01a79aa7de92 upstream.
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85df533a787bf07bf4367ce2a02b822ff1fba1a3 upstream.
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd7c957f936f8cb80d03e5152f4013aae65bd986 upstream.
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c08380860b ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c95eb32ced823a00be62202b43966b07b2f20b7f upstream.
That will simplify the following commits.
No functional changes intended.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-3-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: cd7c957f936f ("mptcp: pm: don't try to create sf if alloc failed")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2d696cc837eaf5394d79bfd2b0b0483c4778aa83 upstream.
[Why]
Currently disabling ASSR before stream is disabled causes visible
display corruption.
[How]
Move disable ASSR command to after stream has been disabled.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 899d92fd26fe780aad711322aa671f68058207a6 upstream.
[WHY]
When switching from "Extend" to "Second Display Only" we sometimes
call resource_get_otg_master_for_stream on a stream for the eDP,
which is disconnected. This leads to a null pointer dereference.
[HOW]
Added a null check in dc_resource.c/resource_log_pipe_topology_update.
CC: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Natanel Roizenman <natanel.roizenman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3cc88e8405b8d55e0ff035e31971aadd6baee2b6 upstream.
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 939b656bc8ab203fdbde26ccac22bcb7f0985be5 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer
was not previously faulted in, we can corrupt the file in a way that the
final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input
buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call
generic_write_checks(), which calls generic_write_checks_count(), and
that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up
calling btrfs_dio_iomap_begin() and that calls
btrfs_get_blocks_direct_write(), where we update the i_size of the
inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access
the page of the write input buffer (at iomap_dio_bio_iter(), with a
call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets
returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode,
fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call
again generic_write_checks(), which calls generic_write_checks_count()
again, and there we set the iocb's position to 4K, which is the current
i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND)
iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write
succeeds, but it wrote to the file range [4K, 8K), leaving a hole in
the [0, 4K) range and an i_size of 8K, which goes against the
expectations of having the data written to the range [0, 4K) and get an
i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer,
in case we get -EFAULT or an incomplete write, and not jumping to the
'relock' label after faulting in the buffer - instead jump to a location
immediately before calling iomap, skipping all the write checks and
relocking. This solves this problem and it's fine even in case the input
buffer is memory mapped to the same file range, since only holding the
range locked in the inode's io tree can cause a deadlock, it's safe to
keep the inode lock (VFS lock), as was fixed and described in commit
51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO
reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <fcntl.h>
#include <stdio.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
int main(int argc, char *argv[])
{
if (argc < 2) {
fprintf(stderr, "Usage: %s <test file>\n", argv[0]);
return 1;
}
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT |
O_APPEND, 0644);
if (fd < 0) {
perror("creating test file");
return 1;
}
char *buf = mmap(NULL, 4096, PROT_READ,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
ssize_t ret = write(fd, buf, 4096);
if (ret < 0) {
perror("pwritev2");
return 1;
}
struct stat stbuf;
ret = fstat(fd, &stbuf);
if (ret < 0) {
perror("stat");
return 1;
}
printf("size: %llu\n", (unsigned long long)stbuf.st_size);
return stbuf.st_size == 4096 ? 0 : 1;
}
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek <hreitz@redhat.com>
Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@redhat.com/
Fixes: 8184620ae212 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb")
CC: stable@vger.kernel.org # 6.1+
Tested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
amdgpu_dm_plane_handle_cursor_update"
commit 778e3979c5dc9cbdb5d1b92afed427de6bc483b4 upstream.
[WHY]
This patch is a dupplicate implementation of 14bcf29b, which we
are reverting due to a regression with kms_plane_cursor IGT tests.
This reverts commit 38e6f715b02b572f74677eb2f29d3b4bc6f1ddff.
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Tested-by: George Zhang <George.zhang@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2919b25778b7479e477cf49af8c680017eafc24 upstream.
[How&Why]
This reverts commit 239b31bd5c3fef3698440bf6436b2068c6bb08a3.
Due to the it effects Replay resync.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 69b6517687a4b1fb250bd8c9c193a0a304c8ba17 upstream.
For !CONFIG_BLK_DEV_INTEGRITY, rq_integrity_vec() wasn't updated
properly. Fix it up.
Fixes: cf546dd289e0 ("block: change rq_integrity_vec to respect the iterator")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8af1f11865f259c882cce71d32f85ee9004e2660 upstream.
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7a5 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d67c5649c1541dc93f202eeffc6f49220a4ed71d upstream.
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d5e ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2bac084468847cfe5bbc7166082b2a208514bb1c upstream.
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
states member of 'struct _StateArray' triggers this restriction,
resulting in:
drivers/gpu/drm/radeon/pptable.h:442:5: error: 'counted_by' should not be applied to an array with element of unknown size because 'ATOM_PPLIB_STATE_V2' (aka 'struct _ATOM_PPLIB_STATE_V2') is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
442 | ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2028
Fixes: efade6fe50e7 ("drm/radeon: silence UBSAN warning (v3)")
Signed-off-by: Bill Wendling <morbo@google.com>
Co-developed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb1ae34e48a09b7a1179c579aed042b032e408f4 upstream.
Managed cleanup with devm_add_action_or_reset() will release the I2C
adapter when the underlying Linux device goes away. But the connector
still refers to it, so this cleanup leaves behind a stale pointer
in struct drm_connector.ddc.
Bind the lifetime of the I2C adapter to the connector's lifetime by
using DRM's managed release. When the DRM device goes away (after
the Linux device) DRM will first clean up the connector and then
clean up the I2C adapter.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: b279df242972 ("drm/mgag200: Switch I2C code to managed cleanup")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.0+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-3-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ecde5db1598aecab54cc392282c15114f526f05f upstream.
Compute the i2c timeout in jiffies from a value in milliseconds. The
original values of 2 jiffies equals 2 milliseconds if HZ has been
configured to a value of 1000. This corresponds to 2.2 milliseconds
used by most other DRM drivers. Update mgag200 accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Fixes: 414c45310625 ("mgag200: initial g200se driver (v2)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20240513125620.6337-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c94f58cef319ad054fd909b3bf4b7d09c03e11c upstream.
Lima DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the
required governor module not being included in the initial ramdisk. Thus,
let's mark simple_ondemand governor as a softdep for Lima, to have its
kernel module included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or may have forced
some users to introduce unnecessary workarounds.
Having simple_ondemand marked as a softdep for Lima may not resolve this
issue for all Linux distributions. In particular, it will remain
unresolved for the distributions whose utilities for the initial ramdisk
generation do not handle the available softdep information [3] properly
yet. However, some Linux distributions already handle softdeps properly
while generating their initial ramdisks, [4] and this is a prerequisite
step in the right direction for the distributions that don't handle them
properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux-pinephone/-/blob/6.7-megi/config?ref_type=heads#L5749
[2] https://gitlab.com/postmarketOS/pmaports/-/blob/7f64e287e7732c9eaa029653e73ca3d4ba1c8598/main/linux-postmarketos-allwinner/config-postmarketos-allwinner.aarch64#L4654
[3] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[4] https://github.com/archlinux/mkinitcpio/commit/97ac4d37aae084a050be512f6d8f4489054668ad
Cc: Philip Muller <philm@manjaro.org>
Cc: Oliver Smith <ollieparanoid@postmarketos.org>
Cc: Daniel Smith <danct12@disroot.org>
Cc: stable@vger.kernel.org
Fixes: 1996970773a3 ("drm/lima: Add optional devfreq and cooling device support")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdaf2e41bb6a0c5118ff9cc21f4f62583208d885.1718655070.git.dsimic@manjaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddf983488c3e8d30d5c2e2b315ae7d9cd87096ed upstream.
[Why]
During resume, observe that we receive CSN event before we start topology
probing. Handling CSN at this moment based on uncertain topology is
unnecessary.
[How]
Add checking condition in drm_dp_mst_handle_up_req() to skip handling CSN
if the topology is yet to be probed.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240626084825.878565-3-Wayne.Lin@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e82290a2e0e8ec5e836ecad1ca025021b3855c2d upstream.
Address only transactions without any data are valid and should not
be flagged as short transactions. Simply return the message size when
no transaction errors occured.
CC: stable@vger.kernel.org
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe7a11c78d2a9bdb8b50afc278a31ac177000948 upstream.
If cpuset_cpu_inactive() fails, set_rq_online() need be called to rollback.
Fixes: 120455c514f7 ("sched: Fix hotplug vs CPU bandwidth control")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-5-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2f027354122f58ee846468a6f6b48672fff92e9b upstream.
Introduce sched_set_rq_on/offline() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-4-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e22f910a26cc2a3ac9c66b8e935ef2a7dd881117 upstream.
I got the following warn report while doing stress test:
jump label: negative count!
WARNING: CPU: 3 PID: 38 at kernel/jump_label.c:263 static_key_slow_try_dec+0x9d/0xb0
Call Trace:
<TASK>
__static_key_slow_dec_cpuslocked+0x16/0x70
sched_cpu_deactivate+0x26e/0x2a0
cpuhp_invoke_callback+0x3ad/0x10d0
cpuhp_thread_fun+0x3f5/0x680
smpboot_thread_fn+0x56d/0x8d0
kthread+0x309/0x400
ret_from_fork+0x41/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
Because when cpuset_cpu_inactive() fails in sched_cpu_deactivate(),
the cpu offline failed, but sched_smt_present is decremented before
calling sched_cpu_deactivate(), it leads to unbalanced dec/inc, so
fix it by incrementing sched_smt_present in the error path.
Fixes: c5511d03ec09 ("sched/smt: Make sched_smt_present track topology")
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Link: https://lore.kernel.org/r/20240703031610.587047-3-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 31b164e2e4af84d08d2498083676e7eeaa102493 upstream.
Introduce sched_smt_present_inc/dec() helper, so it can be called
in normal or error path simply. No functional changed.
Cc: stable@kernel.org
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240703031610.587047-2-yangyingliang@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 919f18f961c03d6694aa726c514184f2311a4614 upstream.
MTRRs have an obsolete fixed variant for fine grained caching control
of the 640K-1MB region that uses separate MSRs. This fixed variant has
a separate capability bit in the MTRR capability MSR.
So far all x86 CPUs which support MTRR have this separate bit set, so it
went unnoticed that mtrr_save_state() does not check the capability bit
before accessing the fixed MTRR MSRs.
Though on a CPU that does not support the fixed MTRR capability this
results in a #GP. The #GP itself is harmless because the RDMSR fault is
handled gracefully, but results in a WARN_ON().
Add the missing capability check to prevent this.
Fixes: 2b1f6278d77c ("[PATCH] x86: Save the MTRRs of the BSP before booting an AP")
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240808000244.946864-1-ak@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e639222a51196c69c70b49b67098ce2f9919ed08 upstream.
The kernel can change spinlock behavior when running as a guest. But this
guest-friendly behavior causes performance problems on bare metal.
The kernel uses a static key to switch between the two modes.
In theory, the static key is enabled by default (run in guest mode) and
should be disabled for bare metal (and in some guests that want native
behavior or paravirt spinlock).
A performance drop is reported when running encode/decode workload and
BenchSEE cache sub-workload.
Bisect points to commit ce0a1b608bfc ("x86/paravirt: Silence unused
native_pv_lock_init() function warning"). When CONFIG_PARAVIRT_SPINLOCKS is
disabled the virt_spin_lock_key is incorrectly set to true on bare
metal. The qspinlock degenerates to test-and-set spinlock, which decreases
the performance on bare metal.
Set the default value of virt_spin_lock_key to false. If booting in a VM,
enable this key. Later during the VM initialization, if other
high-efficient spinlock is preferred (e.g. paravirt-spinlock), or the user
wants the native qspinlock (via nopvspin boot commandline), the
virt_spin_lock_key is disabled accordingly.
This results in the following decision matrix:
X86_FEATURE_HYPERVISOR Y Y Y N
CONFIG_PARAVIRT_SPINLOCKS Y Y N Y/N
PV spinlock Y N N Y/N
virt_spin_lock_key N Y/N Y N
Fixes: ce0a1b608bfc ("x86/paravirt: Silence unused native_pv_lock_init() function warning")
Reported-by: Prem Nath Dey <prem.nath.dey@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Suggested-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Suggested-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240806112207.29792-1-yu.c.chen@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12653ec36112ab55fa06c01db7c4432653d30a8d upstream.
[BUG]
There is a bug report that using the latest trunk GCC 15, btrfs would cause
unterminated-string-initialization warning:
linux-6.6/fs/btrfs/print-tree.c:29:49: error: initializer-string for array of ‘char’ is too long [-Werror=unterminated-string-initialization]
29 | { BTRFS_BLOCK_GROUP_TREE_OBJECTID, "BLOCK_GROUP_TREE" },
|
^~~~~~~~~~~~~~~~~~
[CAUSE]
To print tree names we have an array of root_name_map structure, which
uses "char name[16];" to store the name string of a tree.
But the following trees have names exactly at 16 chars length:
- "BLOCK_GROUP_TREE"
- "RAID_STRIPE_TREE"
This means we will have no space for the terminating '\0', and can lead
to unexpected access when printing the name.
[FIX]
Instead of "char name[16];" use "const char *" instead.
Since the name strings are all read-only data, and are all NULL
terminated by default, there is not much need to bother the length at
all.
Reported-by: Sam James <sam@gentoo.org>
Reported-by: Alejandro Colomar <alx@kernel.org>
Fixes: edde81f1abf29 ("btrfs: add raid stripe tree pretty printer")
Fixes: 9c54e80ddc6bd ("btrfs: add code to support the block group root")
CC: stable@vger.kernel.org # 6.1+
Suggested-by: Alejandro Colomar <alx@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 14ab4792ee120c022f276a7e4768f4dcb08f0cdd upstream.
The lifetime of TCP-AO static_key is the same as the last
tcp_ao_info. On the socket destruction tcp_ao_info ceases to be
with RCU grace period, while tcp-ao static branch is currently deferred
destructed. The static key definition is
: DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ);
which means that if RCU grace period is delayed by more than a second
and tcp_ao_needed is in the process of disablement, other CPUs may
yet see tcp_ao_info which atent dead, but soon-to-be.
And that breaks the assumption of static_key_fast_inc_not_disabled().
See the comment near the definition:
> * The caller must make sure that the static key can't get disabled while
> * in this function. It doesn't patch jump labels, only adds a user to
> * an already enabled static key.
Originally it was introduced in commit eb8c507296f6 ("jump_label:
Prevent key->enabled int overflow"), which is needed for the atomic
contexts, one of which would be the creation of a full socket from a
request socket. In that atomic context, it's known by the presence
of the key (md5/ao) that the static branch is already enabled.
So, the ref counter for that static branch is just incremented
instead of holding the proper mutex.
static_key_fast_inc_not_disabled() is just a helper for such usage
case. But it must not be used if the static branch could get disabled
in parallel as it's not protected by jump_label_mutex and as a result,
races with jump_label_update() implementation details.
Happened on netdev test-bot[1], so not a theoretical issue:
[] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1
[] ------------[ cut here ]------------
[] kernel BUG at arch/x86/kernel/jump_label.c:73!
[] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
[] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1
[] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[] Workqueue: events jump_label_update_timeout
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
...
[] Call Trace:
[] <TASK>
[] arch_jump_label_transform_queue+0x6c/0x110
[] __jump_label_update+0xef/0x350
[] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60
[] jump_label_update_timeout+0x2c/0x40
[] process_one_work+0xe3b/0x1670
[] worker_thread+0x587/0xce0
[] kthread+0x28a/0x350
[] ret_from_fork+0x31/0x70
[] ret_from_fork_asm+0x1a/0x30
[] </TASK>
[] Modules linked in: veth
[] ---[ end trace 0000000000000000 ]---
[] RIP: 0010:__jump_label_patch+0x2f6/0x350
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr
Cc: stable@kernel.org
Fixes: 67fa83f7c86a ("net/tcp: Add static_key for TCP-AO")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5161b48712dcd08ec427c450399d4d1483e21dea upstream.
The mem_cgroup_from_slab_obj() is supposed to be called under rcu lock or
cgroup_mutex or others which could prevent returned memcg from being
freed. Fix it by adding missing rcu read lock.
Found by code inspection.
[songmuchun@bytedance.com: only grab rcu lock when necessary, per Vlastimil]
Link: https://lkml.kernel.org/r/20240801024603.1865-1-songmuchun@bytedance.com
Link: https://lkml.kernel.org/r/20240718083607.42068-1-songmuchun@bytedance.com
Fixes: 0a97c01cd20b ("list_lru: allow explicit memcg and NUMA node selection")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 30b651c8bc788c068a978dc760e9d5f824f7019e upstream.
commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
changed the env variable for the architecture from MACHINE to ARCH.
This is preventing 3 required TEST_GEN_FILES from being included when
cross compiling s390x and errors when trying to run the test suite. This
is due to the ARCH variable already being set and the arch folder name
being s390.
Add "s390" to the filtered list to cover this case and have the 3 files
included in the build.
Link: https://lkml.kernel.org/r/20240724213517.23918-1-npache@redhat.com
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Nico Pache <npache@redhat.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8e556432477e97ad6179c61b61a32bf5f1af2355 upstream.
To mirror the SRCU lock held in eventfs_iterate() when iterating over
eventfs inodes, use call_srcu() to free them too.
This was accidentally(?) degraded to RCU in commit 43aa6f97c2d0
("eventfs: Get rid of dentry pointers without refcounts").
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20240723210755.8970-1-minipli@grsecurity.net
Fixes: 43aa6f97c2d0 ("eventfs: Get rid of dentry pointers without refcounts")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12c20c65d0460cf34f9a665d8f0c0d77d45a3829 upstream.
Commit 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing
ei->dentry") added another check, testing if the parent was freed after
we released the mutex. If so, the function returns NULL. However, all
callers expect it to either return a valid pointer or an error pointer,
at least since commit 5264a2f4bb3b ("tracing: Fix a NULL vs IS_ERR() bug
in event_subsystem_dir()"). Returning NULL will therefore fail the error
condition check in the caller.
Fix this by substituting the NULL return value with a fitting error
pointer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Fixes: 77a06c33a22d ("eventfs: Test for ei->is_freed when accessing ei->dentry")
Link: https://lore.kernel.org/20240723122522.2724-1-minipli@grsecurity.net
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b5487aefb1ce7a6b1f15a33297d1231306b4122 upstream.
Setting encryption as required in security flags was broken.
For example (to require all mounts to be encrypted by setting):
"echo 0x400c5 > /proc/fs/cifs/SecurityFlags"
Would return "Invalid argument" and log "Unsupported security flags"
This patch fixes that (e.g. allowing overriding the default for
SecurityFlags 0x00c5, including 0x40000 to require seal, ie
SMB3.1.1 encryption) so now that works and forces encryption
on subsequent mounts.
Acked-by: Bharath SM <bharathsm@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6d45e1c948a8b7ed6ceddb14319af69424db730c upstream.
We are hit with a not easily reproducible divide-by-0 panic in padata.c at
bootup time.
[ 10.017908] Oops: divide error: 0000 1 PREEMPT SMP NOPTI
[ 10.017908] CPU: 26 PID: 2627 Comm: kworker/u1666:1 Not tainted 6.10.0-15.el10.x86_64 #1
[ 10.017908] Hardware name: Lenovo ThinkSystem SR950 [7X12CTO1WW]/[7X12CTO1WW], BIOS [PSE140J-2.30] 07/20/2021
[ 10.017908] Workqueue: events_unbound padata_mt_helper
[ 10.017908] RIP: 0010:padata_mt_helper+0x39/0xb0
:
[ 10.017963] Call Trace:
[ 10.017968] <TASK>
[ 10.018004] ? padata_mt_helper+0x39/0xb0
[ 10.018084] process_one_work+0x174/0x330
[ 10.018093] worker_thread+0x266/0x3a0
[ 10.018111] kthread+0xcf/0x100
[ 10.018124] ret_from_fork+0x31/0x50
[ 10.018138] ret_from_fork_asm+0x1a/0x30
[ 10.018147] </TASK>
Looking at the padata_mt_helper() function, the only way a divide-by-0
panic can happen is when ps->chunk_size is 0. The way that chunk_size is
initialized in padata_do_multithreaded(), chunk_size can be 0 when the
min_chunk in the passed-in padata_mt_job structure is 0.
Fix this divide-by-0 panic by making sure that chunk_size will be at least
1 no matter what the input parameters are.
Link: https://lkml.kernel.org/r/20240806174647.1050398-1-longman@redhat.com
Fixes: 004ed42638f4 ("padata: add basic support for multithreaded jobs")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcf86c01ca4676316557dd482c8416ece8c2e143 upstream.
"tracing_map->next_elt" in get_free_elt() is at risk of overflowing.
Once it overflows, new elements can still be inserted into the tracing_map
even though the maximum number of elements (`max_elts`) has been reached.
Continuing to insert elements after the overflow could result in the
tracing_map containing "tracing_map->max_size" elements, leaving no empty
entries.
If any attempt is made to insert an element into a full tracing_map using
`__tracing_map_insert()`, it will cause an infinite loop with preemption
disabled, leading to a CPU hang problem.
Fix this by preventing any further increments to "tracing_map->next_elt"
once it reaches "tracing_map->max_elt".
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 08d43a5fa063e ("tracing: Add lock-free tracing_map")
Co-developed-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Link: https://lore.kernel.org/20240805055922.6277-1-Tze-nan.Wu@mediatek.com
Signed-off-by: Cheng-Jui Wang <cheng-jui.wang@mediatek.com>
Signed-off-by: Tze-nan Wu <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b1560408692cd0ab0370cfbe9deb03ce97ab3f6d upstream.
When eventfs was introduced, special care had to be done to coordinate the
freeing of the file meta data with the files that are exposed to user
space. The file meta data would have a ref count that is set when the file
is created and would be decremented and freed after the last user that
opened the file closed it. When the file meta data was to be freed, it
would set a flag (EVENT_FILE_FL_FREED) to denote that the file is freed,
and any new references made (like new opens or reads) would fail as it is
marked freed. This allowed other meta data to be freed after this flag was
set (under the event_mutex).
All the files that were dynamically created in the events directory had a
pointer to the file meta data and would call event_release() when the last
reference to the user space file was closed. This would be the time that it
is safe to free the file meta data.
A shortcut was made for the "format" file. It's i_private would point to
the "call" entry directly and not point to the file's meta data. This is
because all format files are the same for the same "call", so it was
thought there was no reason to differentiate them. The other files
maintain state (like the "enable", "trigger", etc). But this meant if the
file were to disappear, the "format" file would be unaware of it.
This caused a race that could be trigger via the user_events test (that
would create dynamic events and free them), and running a loop that would
read the user_events format files:
In one console run:
# cd tools/testing/selftests/user_events
# while true; do ./ftrace_test; done
And in another console run:
# cd /sys/kernel/tracing/
# while true; do cat events/user_events/__test_event/format; done 2>/dev/null
With KASAN memory checking, it would trigger a use-after-free bug report
(which was a real bug). This was because the format file was not checking
the file's meta data flag "EVENT_FILE_FL_FREED", so it would access the
event that the file meta data pointed to after the event was freed.
After inspection, there are other locations that were found to not check
the EVENT_FILE_FL_FREED flag when accessing the trace_event_file. Add a
new helper function: event_file_file() that will make sure that the
event_mutex is held, and will return NULL if the trace_event_file has the
EVENT_FILE_FL_FREED flag set. Have the first reference of the struct file
pointer use event_file_file() and check for NULL. Later uses can still use
the event_file_data() helper function if the event_mutex is still held and
was not released since the event_file_file() call.
Link: https://lore.kernel.org/all/20240719204701.1605950-1-minipli@grsecurity.net/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Cc: Ilkka Naulapää <digirigawa@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: Alexey Makhalov <alexey.makhalov@broadcom.com>
Cc: Vasavi Sirnapalli <vasavi.sirnapalli@broadcom.com>
Link: https://lore.kernel.org/20240730110657.3b69d3c1@gandalf.local.home
Fixes: b63db58e2fa5d ("eventfs/tracing: Add callback for release of an eventfs_inode")
Reported-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 81af7f2342d162e24ac820c10e68684d9f927663 upstream.
Round constant_charge_voltage writes down to the first supported lower
value, rather then rounding them up to the first supported higher value.
This fixes e.g. writing 4250000 resulting in a value of 4350000 which
might be dangerous, instead writing 4250000 will now result in a safe
4200000 value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-2-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b34ce4a59cfe9cd0d6f870e6408e8ec88a964585 upstream.
info->max_cv is in millivolts, divide the microvolt value being written
to constant_charge_voltage by 1000 *before* clamping it to info->max_cv.
Before this fix the code always tried to set constant_charge_voltage
to max_cv / 1000 = 4 millivolt, which ends up in setting it to 4.1V
which is the lowest supported value.
Fixes: 843735b788a4 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240717200333.56669-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bf9d5cb588755ee41ac12a8976dccf44ae18281b upstream.
The driver returns -ENODEV when the firmware battmrg service hasn't
started yet, while per-se -ENODEV is fine, we usually use -EAGAIN to
tell the user to retry again later. And the power supply core uses
-EGAIN when the device isn't initialized, let's use the same return.
This notably causes an infinite spam of:
thermal thermal_zoneXX: failed to read out thermal zone (-19)
because the thermal core doesn't understand -ENODEV, but only
considers -EAGAIN as a non-fatal error.
While it didn't appear until now, commit [1] fixes thermal core
and no more ignores thermal zones returning an error at first
temperature update.
[1] 5725f40698b9 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid")
Link: https://lore.kernel.org/all/2ed4c630-204a-4f80-a37f-f2ca838eb455@linaro.org/
Cc: stable@vger.kernel.org
Fixes: 29e8142b5623 ("power: supply: Introduce Qualcomm PMIC GLINK power supply")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20240715-topic-sm8x50-upstream-fix-battmgr-temp-tz-warn-v1-1-16e842ccead7@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e688c220732e518c2eb1639e9ef77d4a9311713c upstream.
efi_shutdown_init() can register a general sys_off handler named
efi_power_off(). Enable this by providing efi_poweroff_required(),
like arm and x86. Since EFI poweroff is also supported on LoongArch,
and the enablement makes the poweroff function usable for hardwares
which lack ACPI S5.
We prefer ACPI poweroff rather than EFI poweroff (like x86), so we only
require EFI poweroff if acpi_gbl_reduced_hardware or acpi_no_s5 is true.
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edbbaae42a56f9a2b39c52ef2504dfb3fb0a7858 upstream.
Currently, whenever a caller is providing an affinity hint for an
interrupt, the allocation code uses it to calculate the node and copies the
cpumask into irq_desc::affinity.
If the affinity for the interrupt is not marked 'managed' then the startup
of the interrupt ignores irq_desc::affinity and uses the system default
affinity mask.
Prevent this by setting the IRQD_AFFINITY_SET flag for the interrupt in the
allocator, which causes irq_setup_affinity() to use irq_desc::affinity on
interrupt startup if the mask contains an online CPU.
[ tglx: Massaged changelog ]
Fixes: 45ddcecbfa94 ("genirq: Use affinity hint in irqdesc allocation")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20240806072044.837827-1-shayd@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 03f9885c60adf73488fe32aab628ee3d4a39598e upstream.
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d73f0f49daa84176c3beee1606e73c7ffb6af8b2 upstream.
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c90724 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d4df2dad312f270d62fecb0e5c8b086c6d7dcfc upstream.
When collecting coverage from softirqs, KCOV uses in_serving_softirq() to
check whether the code is running in the softirq context. Unfortunately,
in_serving_softirq() is > 0 even when the code is running in the hardirq
or NMI context for hardirqs and NMIs that happened during a softirq.
As a result, if a softirq handler contains a remote coverage collection
section and a hardirq with another remote coverage collection section
happens during handling the softirq, KCOV incorrectly detects a nested
softirq coverate collection section and prints a WARNING, as reported by
syzbot.
This issue was exposed by commit a7f3813e589f ("usb: gadget: dummy_hcd:
Switch to hrtimer transfer scheduler"), which switched dummy_hcd to using
hrtimer and made the timer's callback be executed in the hardirq context.
Change the related checks in KCOV to account for this behavior of
in_serving_softirq() and make KCOV ignore remote coverage collection
sections in the hardirq and NMI contexts.
This prevents the WARNING printed by syzbot but does not fix the inability
of KCOV to collect coverage from the __usb_hcd_giveback_urb when dummy_hcd
is in use (caused by a7f3813e589f); a separate patch is required for that.
Link: https://lkml.kernel.org/r/20240729022158.92059-1-andrey.konovalov@linux.dev
Fixes: 5ff3b30ab57d ("kcov: collect coverage from interrupts")
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac
Acked-by: Marco Elver <elver@google.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Aleksandr Nogikh <nogikh@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f38ba5459ced3441852f37f20fcfb7bd39d20f62 upstream.
Currently, irqchips for all of the subnodes (which represent a given
bus master) point to the parent wrapper node. This is no bueno, as
no interrupts arrive, ever (because nothing references that node).
Fix that by passing a reference to the respective master's of_node.
Worth noting, this is a NOP for devices with only a single master
described.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240522-topic-spmi_multi_master_irqfix-v2-1-7ec92a862b9f@linaro.org
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 02922ccbb330 ("spmi: pmic-arb: Register controller for bus instead of arbiter")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240725164636.3362690-3-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6675e76a5c441b52b1b983ebb714122087020ebe upstream.
Fix the missing mic on OMEN by HP Gaming Laptop 16-n0xxx by adding the
quirk entry with the board ID 8A44.
Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1227182
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807170249.16490-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7ae04ba36b381bffe2471eff3a93edced843240f upstream.
ARCH_DMA_MINALIGN was defined as 16 - this is too small - it may be
possible that two unrelated 16-byte allocations share a cache line. If
one of these allocations is written using DMA and the other is written
using cached write, the value that was written with DMA may be
corrupted.
This commit changes ARCH_DMA_MINALIGN to be 128 on PA20 and 32 on PA1.1 -
that's the largest possible cache line size.
As different parisc microarchitectures have different cache line size, we
define arch_slab_minalign(), cache_line_size() and
dma_get_cache_alignment() so that the kernel may tune slab cache
parameters dynamically, based on the detected cache line size.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1fd2c10acb7b35d72101a4619ee5b2cddb9efd3a upstream.
There were spurious unaligned access warnings when calling BPF code.
Sometimes, the warnings were triggered with any incoming packet, making
the machine hard to use.
The reason for the warnings is this: on parisc64, pointers to functions
are not really pointers to functions, they are pointers to 16-byte
descriptor. The first 8 bytes of the descriptor is a pointer to the
function and the next 8 bytes of the descriptor is the content of the
"dp" register. This descriptor is generated in the function
bpf_jit_build_prologue.
The problem is that the function bpf_int_jit_compile advertises 4-byte
alignment when calling bpf_jit_binary_alloc, bpf_jit_binary_alloc
randomizes the returned array and if the array happens to be not aligned
on 8-byte boundary, the descriptor generated in bpf_jit_build_prologue is
also not aligned and this triggers the unaligned access warning.
Fix this by advertising 8-byte alignment on parisc64 when calling
bpf_jit_binary_alloc.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
