summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-03tg3: Manage gphy power for CPMU-less devs onlyMatt Carlson1-1/+4
This patch changes the code to only manage the PCIe gphy power for CPMU-less devices only. The CPMU takes over management for newer chips. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03tg3: Don't access phy test ctrl reg for 5717+Matt Carlson2-3/+11
The phy test register location has been repurposed for 5717+ devices. This patch changes the code to avoid this location for these devices. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03tg3: Create TG3_FLG3_5717_PLUS flagMatt Carlson2-50/+23
This patch creates a TG3_FLG3_5717_PLUS flag to collectively describe the set of changes in the ASIC that will apply to all future chip revisions. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03tg3: Disable TSS also during tg3_close()Matt Carlson1-1/+1
The TSS flag needs to be turned off during tg3_close(). If the device fails to allocate more than one MSI-X vector the next time the device is brought up, transmits will fail. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03tg3: Add 5784 ASIC rev to earlier PCIe MPS fixMatt Carlson1-2/+1
tg3 commit e7126997342560533317d8467e8516119ebcbd21 entitled "tg3: Preserve PCIe MPS setting for new devs" attempted to ensure the PCIe link negotiated Maximum Payload Size (MPS) setting was 128 bytes for all devices that didn't support higher speeds. The 5784 device was mistakenly added to this list when it shouldn't have. This patch removes the 5784 ASIC rev devices from that list. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-03Merge branch 'master' of ↵David S. Miller45-363/+806
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6
2010-08-02netfilter: nf_conntrack_acct: use skb->len for accountingChangli Gao1-2/+1
use skb->len for accounting as xt_quota does. Since nf_conntrack works at the network layer, skb_network_offset should always returns ZERO. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02netfilter: nf_nat: don't check if the tuple is unique when there isn't any ↵Changli Gao3-6/+6
other choice The tuple got from unique_tuple() doesn't need to be really unique, so the check for the unique tuple isn't necessary, when there isn't any other choice. Eliminating the unnecessary nf_nat_used_tuple() can save some CPU cycles too. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02netfilter: nf_nat: make unique_tuple return voidChangli Gao10-32/+30
The only user of unique_tuple() get_unique_tuple() doesn't care about the return value of unique_tuple(), so make unique_tuple() return void (nothing). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02netfilter: nf_nat: use local variable hdrlenChangli Gao1-11/+7
Use local variable hdrlen instead of ip_hdrlen(skb). Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02ipvs: provide default ip_vs_conn_{in,out}_get_protoSimon Horman5-153/+63
This removes duplicate code by providing a default implementation which is used by 3 of the 4 modules that provide these call. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02ipvs: remove EXPERIMENTAL tagSimon Horman1-1/+1
IPVS was merged into the kernel quite a long time ago and has been seeing wide-spread production use for even longer. It seems appropriate for it to be no longer tagged as EXPERIMENTAL Signed-off-as: Simon Horman <horms@verge.net.au> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02netfilter: nf_conntrack_extend: introduce __nf_ct_ext_exist()Changli Gao2-12/+19
some users of nf_ct_ext_exist() know ct->ext isn't NULL. For these users, the check for ct->ext isn't necessary, the function __nf_ct_ext_exist() can be used instead. the type of the return value of nf_ct_ext_exist() is changed to bool. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-02netfilter: {ip,ip6,arp}_tables: dont block bottom half more than necessaryEric Dumazet3-12/+18
We currently disable BH for the whole duration of get_counters() On machines with a lot of cpus and large tables, this might be too long. We can disable preemption during the whole function, and disable BH only while fetching counters for the current cpu. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-08-01net: ingress filter message limitStephen Hemminger1-4/+4
If user misconfigures ingress and causes a redirection loop, don't overwhelm the log. This is also a error case so make it unlikely. Found by inspection, luckily not in real system. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-01net/rose: Use GFP_ATOMICJulia Lawall1-1/+3
The other calls to kmalloc in the same function use GFP_ATOMIC, and indeed two locks are held within the body of the function. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier f; @@ *f(...,GFP_ATOMIC,...) ... when != spin_unlock(...) when != read_unlock(...) when != write_unlock(...) when != read_unlock_irq(...) when != write_unlock_irq(...) when != read_unlock_irqrestore(...) when != write_unlock_irqrestore(...) when != spin_unlock_irq(...) when != spin_unlock_irqrestore(...) *f(...,GFP_KERNEL,...) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: fix to avoid sending get_stats request if one is already being ↵Ajit Khaparde3-1/+5
processed. GET_STATS request uses the same memory region as the response. If a new request for get stats is fired before the response for the previous get_stats request is received, the response will corrupt the new request, causing the f/w to misbehave. Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: change to show correct physical link statusAjit Khaparde1-1/+2
link status is wrongly displayed under certain circumstances. This change fixes it. Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: add code to dump registers for debugAjit Khaparde5-0/+140
when the BE device becomes unresponsive, dump the registers to help debugging Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: fix to correctly know if driver needs to run for a VF or a PFAjit Khaparde1-2/+3
Move be_check_sriov_fn_type to appropriate place to correctly determine if the be2net driver needs to work as a VF driver or a PF driver. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31sky2: Code style fixesMike McCormack1-12/+12
Fix selected style problems reported by checkpatch. Signed-off-by: Mike McCormack <mikem@ring3k.org> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31TI DaVinci EMAC: Fix incorrect reference to EMAC_CTRL registers.Sriram1-3/+5
The EMAC modules control registers vary as per the version of the EMAC module. EMAC_CTRL_EWCTL,EMAC_CTRL_EWINTTCNT are available only on EMAC_VERSION_1. The emac_dump_regs() function accesses these indiscriminately. This patch fixes the issue. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31TI DaVinci EMAC: Fix asymmetric handling of packets in NAPI Poll function.Sriram1-13/+8
The current implementation of NAPI poll function in the driver does not service Rx packets, error condition even if a single Tx packet gets serviced in the napi poll call. This behavior severely affects performance for specific use cases. This patch modifies the poll function implementation to service tx/rx packets in an identical manner. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31TI DaVinci EMAC : Implement interrupt pacing functionality.Sriram1-2/+131
DaVinci EMAC module includes an interrupt pacing block that can be programmed to throttle the rate at which interrupts are generated. This patch implements interrupt pacing logic that can be controlled through the ethtool interface(only rx_coalesce_usecs param is honored) Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31bridge: Allow multicast snooping to be disabled before ifupHerbert Xu1-5/+4
Currently you cannot disable multicast snooping while a device is down. There is no good reason for this restriction and this patch removes it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31dnet: fixup error handling in initializationDan Carpenter1-2/+5
There were two problems here. We returned success if dnet_mii_init() failed and there was a release_mem_region() missing. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31bonding: prevent sysfs from allowing arp monitoring with alb/tlbAndy Gospodarek1-12/+25
When using module options arp monitoring and balance-alb/balance-tlb are mutually exclusive options. Anytime balance-alb/balance-tlb are enabled mii monitoring is forced to 100ms if not set. When configuring via sysfs no checking is currently done. Handling these cases with sysfs has to be done a bit differently because we do not have all configuration information available at once. This patch will not allow a mode change to balance-alb/balance-tlb if arp_interval is already non-zero. It will also not allow the user to set a non-zero arp_interval value if the mode is already set to balance-alb/balance-tlb. They are still mutually exclusive on a first-come, first serve basis. Tested with initscripts on Fedora and manual setting via sysfs. Signed-off-by: Andy Gospodarek <gospo@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31drivers/net/vxge/vxge-main.c: Use pr_<level> and netdev_<level>Joe Perches1-16/+11
Use pr_fmt, pr_<level> and netdev_<level> where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31net: ks8842 depends on DMA_ENGINERandy Dunlap1-1/+1
ks8842 uses dma channel functions, so it should depend on DMA_ENGINE. ERROR: "__dma_request_channel" [drivers/net/ks8842.ko] undefined! ERROR: "dma_release_channel" [drivers/net/ks8842.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31ucc_geth: fix UCC device number in debug messageSergey Matyukevich1-1/+1
This patch contains a fix for UCC device number in verbose debug message. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31tun: keep link (carrier) state up to dateNolan Leake1-7/+3
Currently, only ethtool can get accurate link state of a tap device. With this patch, IFF_RUNNING and IF_OPER_UP/DOWN are kept up to date as well. Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-29Merge branch 'master' of ↵John W. Linville145-2826/+3858
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-07-29cfg80211: fix dev <-> wiphy typoChristian Lamparter1-1/+1
Cc: Joe Perches <joe@perches.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mac80211: allow drivers to request DTIM periodJohannes Berg5-5/+84
Some features require knowing the DTIM period before associating. This implements the ability to wait for a beacon in mac80211 before assoc to provide this value. It is optional since most likely not all drivers will need this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29iwlwifi: fix scan abortStanislaw Gruszka1-10/+8
Fix possible double priv->mutex lock introduced by commit a69b03e941abae00380fc6bc1877fb797a1b31e6 "iwlwifi: cancel scan watchdog in iwl_bg_abort_scan" . We can not call cancel_delayed_work_sync(&priv->scan_check) with priv->mutex locked because workqueue function iwl_bg_scan_check() take that lock internally. We do not need to synchronize when canceling priv->scan_check work. We can avoid races (sending double abort command or send no command at all) using STATUS_SCAN_ABORT bit. Moreover current iwl_bg_scan_check() code seems to be broken, as we should not send abort commands when currently aborting. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mwl8k: change maintenance statusLennert Buytenhek1-1/+1
The 8366 AP support in particular is still rather incomplete, but this is unlikely to be addressed any time soon. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1271: update hw/fw version info in wiphy structJohn W. Linville1-0/+7
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29wl1251: update hw/fw version info in wiphy structJohn W. Linville1-0/+5
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29wl1271: add get_survey callback in order to get channel noiseJohn W. Linville3-0/+27
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29libertas_tf: add get_survey callback in order to get channel noiseJohn W. Linville2-0/+21
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1251: add get_survey callback in order to get channel noiseJohn W. Linville3-0/+26
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29ar9170: add get_survey callback in order to get channel noiseJohn W. Linville1-0/+19
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com>
2010-07-29mwl8k: add get_survey callback in order to get channel noiseJohn W. Linville1-4/+27
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-29ath9k: enable serialize_regmode for non-PCIE AR9160John W. Linville1-1/+2
https://bugzilla.kernel.org/show_bug.cgi?id=16476 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: stable@kernel.org
2010-07-29net: bnx2x_cmn.c needs net/ip6_checksum.h for csum_ipv6_magicStephen Rothwell1-0/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-29mac80211: inform drivers about the off-channel status on channel changesFelix Fietkau2-0/+6
For some drivers it can be useful to know whether the channel they're supposed to switch to is going to be used for short off-channel work or scanning, or whether the hardware is expected to stay on it for a while longer. This is important for various kinds of calibration work, which takes longer to complete and should keep some persistent state, even if the channel temporarily changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29Revert "mac80211: fix sw scan bracketing"Luis R. Rodriguez1-2/+2
This reverts this commit. While in theory the change is correct the patch does not address current assumptions made by some drivers, one which is definitley affected is ath9k. Prior to this change the scan complete callback would be called after we returned to the home channel and configured the hardware RX filters. After this change we call the scan complete callback prior to both the hw config and the config filter. At least for ath9k this breaks quite a few assumptions on the callback, leading to disconnects to the AP after every scan making the driver pretty useless on STA mode. The goal behind this commit was to address the now understood spurious warnings from ath9k and mac80211_hwsim on scanning on two wiphys at the same time but we have now supressed these and will address this issue in the next kernel release. When fixing this for good next we must first review the other driver's dependence on this logic and perhaps consider removal of the scan complete callback all together. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29ath9k: remove the two wiphys scanning at the same time messageLuis R. Rodriguez1-4/+9
When issuing two consecutive scans you could often end up getting in the logs: "ath9k: Two wiphys trying to scan at the same time" This message is due to a race in mac80211 but addressing that race requires some more major changes on the driver and perhaps optimizations on mac80211 like removing the scan complete callback alltogether. Its too late to address this this kernel release so supress the complaint and annotate this needs fixing for later. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29cfg80211: Update of regulatory request initiator handlingYuri Ershov1-1/+2
In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29nl80211: Fix memory leaksYuri Ershov1-0/+2
In case of errors during message composing msg should be freed after canceling. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-25 05:19:23 +0300